MAX307CPI+ - Dual 8:1 CMOS Analog Multiplexer | Maxim
MPN: MAX307CPI+ ✓ نشطMAX307CPI+ نظرة عامة
An analog multiplexer is an interface IC that connects multiple analog inputs to a shared amplifier, converter, or measurement circuit. The MAX307 family occupies the hierarchy of analog switch, analog multiplexer, interface IC, and integrated circuit. By routing signals through matched CMOS switches, it reduces the number of external signal paths while preserving consistent channel resistance across the selected analog range.
Key electrical characteristics include less than 100 ohms on-resistance, resistance matching within 5 ohms between channels, and a maximum resistance variation of 7 ohms over the specified analog signal range. The MAX307 is fabricated using Maxim's improved 44 V silicon-gate process. Its monolithic construction supports repeatable switching behavior and low charge injection of less than 10 pC, which helps limit transient errors when a channel changes state.
The device provides two 8:1 analog muxes in a 28-pin PDIP package. Pin-compatible MAX307 family members allow commercial and extended-temperature designs to share PCB layouts and mechanical assemblies. Channel matching is particularly important when measuring or converting multiple inputs through one signal chain because differences in resistance otherwise create gain or offset differences between channels.
Typical uses include precision data acquisition, automated test equipment, signal characterization, industrial process measurement, and multichannel sensor interfaces. In a data-acquisition circuit, each mux can select a sensor or reference voltage before it reaches a shared amplifier and analog-to-digital converter. The matched resistance reduces channel-to-channel calibration effort, while the 8:1 organization supports compact systems requiring numerous analog inputs.
Design the surrounding circuit to keep selected signals within the mux's specified analog range and provide appropriate source and return paths. Because charge injection and off-channel behavior can create transient or crosstalk errors, allow settling time between channel changes and place the mux close to the sensitive amplification stage. The 28-pin PDIP format also requires adequate through-hole clearance and appropriate protection against electrostatic discharge during handling.
This product record combines manufacturer family information, commercial listing attributes, package details, selection guidance, and practical PCB considerations. It also distinguishes true pin-compatible MAX307 family members from broader multiplexers that may perform similar routing functions but require a different footprint or interface.
بدائل مباشرة لـ MAX307CPI+ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
MAX307CPI
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MAX307CPI-
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MAX307EPI+
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MAX307CPE+
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MAX307CSE+
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MAX307CPI+ المواصفات
| Multiplexer Configuration | Dual 8:1 analog multiplexer |
| Number of Circuits | 2 circuits |
| Number of Channels per Circuit | 8 channels |
| Total Multiplexed Channels | 16 channels |
| On-Resistance | Less than 100 ohm |
| Channel Resistance Matching | Within 5 ohm between channels |
| Maximum On-Resistance Variation | 7 ohm over the specified analog signal range |
| Supply Voltage Range | 5 V to 30 V |
| Charge Injection | Less than 10 pC |
| Process Technology | Improved 44 V silicon-gate CMOS process |
| العلبة | 28-pin PDIP |
| نوع التركيب | Through-hole |
| RoHS Compliance | Unknown |
| REACH Compliance | Unknown |
دليل تكوين أطراف MAX307CPI+ 28-pin pdip
تكوين الأطراف لـ MAX307CPI+ (حزمة 28-pin pdip). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX307CPI+.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MAX307CPI+ مناسب لـ 6 التطبيقs: Precision Data Acquisition, Automated Test Equipment, Industrial Sensor Interfacing, Process Control Signal Conditioning, Signal Characterization, Multichannel Instrumentation.
Precision Data Acquisition
The MAX307CPI+ fits a multichannel data-acquisition front end because its two independent 8:1 sections can route 16 analog inputs toward shared measurement circuitry. On-resistance below 100 ohms limits voltage-divider error, while matching within 5 ohms helps reduce channel-dependent gain variation. Place each multiplexer close to the amplifier or converter input and establish a defined settling interval after changing channels. Verify that every sensor voltage remains inside the specified analog range and that the selected source impedance does not degrade settling performance.
موصى به
Automated Test Equipment
The MAX307CPI+ can route multiple test nodes into a common measurement amplifier, comparator, or instrument input. Its matched on-resistance reduces the channel-to-channel measurement differences that otherwise complicate calibration tables. The dual 8:1 organization offers useful routing flexibility while retaining a single 28-pin PDIP footprint. Place the device near the instrumentation connector or protected test node, provide a low-leakage return path, and allow enough settling time for the complete measurement chain before capturing a result.
موصى به
Industrial Sensor Interfacing
The MAX307CPI+ is suitable for consolidating multiple industrial sensor outputs into a single analog signal chain. Its less-than-100-ohm on-resistance provides a practical compromise between low insertion resistance, switching behavior, and integration density. Because channel resistance is matched within 5 ohms, production calibration can be more consistent across similarly conditioned inputs. Guard the external circuitry against industrial transients, confirm the allowable common-mode and analog signal range, and keep long sensor wiring away from sensitive multiplexer and amplifier traces.
موصى به
Process Control Signal Conditioning
The MAX307CPI+ can select pressure, temperature, level, or current-derived voltages for a shared process-control input. Two 8:1 sections support more signals than a single 8:1 bank while keeping the external routing controlled. Resistance matching within 5 ohms limits channel-related gain drift, although the final error budget must still include sensor accuracy, wiring, amplifier offset, and conversion error. Use short traces, a stable analog ground plane, and input protection appropriate to the industrial environment.
موصى به
Signal Characterization
The MAX307CPI+ is useful when a laboratory or production system must compare several analog sources under nearly identical loading conditions. Its resistance matching within 5 ohms and flat on-resistance over the specified range help minimize loading-induced differences between channels. Route selected signals directly to the measurement amplifier when possible to avoid adding board-level impedance. Before starting a sweep, verify settling time, off-channel isolation, and the input level required by the downstream instrument.
موصى به
Multichannel Instrumentation
The MAX307CPI+ supports compact instrumentation in which multiple analog inputs share an amplifier, reference, or data converter. Sixteen total channels in a 28-pin PDIP package reduce external routing complexity compared with using two separate multiplexers. The monolithic CMOS implementation also provides consistent on-resistance across channels, which is important when instrument gain settings are reused across channels. Decouple the supply close to the device, maintain a continuous ground reference, and follow the manufacturer pinout when assigning the two selector interfaces.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MAX307CPI+ — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MAX307CPI | MAX307CPI- | MAX307EPI+ | MAX307CPE+ | MAX307CSE+ |
|---|---|---|---|---|---|---|
| Package | 28-pin PDIP | 28-pin PDIP | 28-pin PDIP | 28-pin PDIP | 28-pin PDIP | 28-pin PDIP |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Multiplexer Configuration | Dual 8:1 | Dual 8:1 | Dual 8:1 | Dual 8:1 | Dual 8:1 | Dual 8:1 |
| Total Channels | 16 channels | 16 channels | 16 channels | 16 channels | 16 channels | 16 channels |
| On-Resistance | Less than 100 ohm | Less than 100 ohm | Less than 100 ohm | Less than 100 ohm | Less than 100 ohm | Less than 100 ohm |
| Channel Resistance Matching | Within 5 ohm | Within 5 ohm | Within 5 ohm | Within 5 ohm | Within 5 ohm | Within 5 ohm |
| Supply Voltage Range | 5 V to 30 V | 5 V to 30 V | 5 V to 30 V | 5 V to 30 V | 5 V to 30 V | 5 V to 30 V |
| Charge Injection | Less than 10 pC | Less than 10 pC | Less than 10 pC | Less than 10 pC | Less than 10 pC | Less than 10 pC |
| Process Technology | Improved 44 V silicon-gate CMOS process | Improved 44 V silicon-gate CMOS process | Improved 44 V silicon-gate CMOS process | Improved 44 V silicon-gate CMOS process | Improved 44 V silicon-gate CMOS process | Improved 44 V silicon-gate CMOS process |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
أبرز الفروقات
- Two complete 8:1 mux sections in one package (مقابلMAX306CPI)
- Matched channel resistance reduces calibration variation (مقابلMAX307CPI)
- Low on-resistance for shared analog signal paths (مقابلMAX307EPI+)
ملاحظات التصميم
Treat the mux output as a switched capacitance rather than an ideal zero-impedance node. Charge injection of less than 10 pC can still create a measurable transient when the selected node has high source impedance. Minimize the impedance of the downstream amplifier input, place the mux close to that input, and include a defined post-switch settling interval before conversion or comparison.
Route the multiplexed signal as a short, continuous path between the selected source, the MAX307CPI+ pin, and the receiving amplifier. Avoid long shared traces and unnecessary test-point stubs because parasitic capacitance increases settling time. Keep the analog ground return continuous under and around the device, and place supply bypassing close to the package power pins using the manufacturer’s recommended capacitance and voltage-rating guidance.
Do not substitute the MAX307 for the MAX306 solely because both are precision CMOS multiplexers from the same family. Confirm the dual 8:1 versus 16:1 topology, selector logic, pin assignments, and supply limits. For every MAX307 ordering suffix, also verify the commercial or extended-temperature grade so a mechanically compatible part does not create an out-of-temperature operating condition.
Use the 28-pin PDIP package orientation mark as the physical reference and assign every connection from the family pin-description table. Keep each multiplexer section’s control and signal pins grouped logically on the schematic even though the package is shared. Maintain adequate through-hole spacing and consider a socket when the assembly requires replacement or temperature cycling during system validation.
معلومات الامتثال
The MAX307 product page identifies the family as production, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MAX307CPI+ ordering code.