Maxim Integrated

MAX307CPI+ - Dual 8:1 CMOS Analog Multiplexer | Maxim

MPN: MAX307CPI+ ✓ Aktif
5 V to 30 V Vdss Less than 100 ohm Rds(on) 28-pin PDIP Package
MOQ: 1 |

MAX307CPI+ Genel Bakış

The Maxim Integrated MAX307CPI+ is a precision, dual 8:1 CMOS analog multiplexer with on-resistance below 100 ohms, channel matching within 5 ohms, and a 28-pin PDIP package. It combines two independently controlled 8:1 muxes, providing 16 analog channels in a single device. The multiplexers support single or dual-polarity operation and are intended for precision signal-routing and instrumentation applications.

An analog multiplexer is an interface IC that connects multiple analog inputs to a shared amplifier, converter, or measurement circuit. The MAX307 family occupies the hierarchy of analog switch, analog multiplexer, interface IC, and integrated circuit. By routing signals through matched CMOS switches, it reduces the number of external signal paths while preserving consistent channel resistance across the selected analog range.

Key electrical characteristics include less than 100 ohms on-resistance, resistance matching within 5 ohms between channels, and a maximum resistance variation of 7 ohms over the specified analog signal range. The MAX307 is fabricated using Maxim's improved 44 V silicon-gate process. Its monolithic construction supports repeatable switching behavior and low charge injection of less than 10 pC, which helps limit transient errors when a channel changes state.

The device provides two 8:1 analog muxes in a 28-pin PDIP package. Pin-compatible MAX307 family members allow commercial and extended-temperature designs to share PCB layouts and mechanical assemblies. Channel matching is particularly important when measuring or converting multiple inputs through one signal chain because differences in resistance otherwise create gain or offset differences between channels.

Typical uses include precision data acquisition, automated test equipment, signal characterization, industrial process measurement, and multichannel sensor interfaces. In a data-acquisition circuit, each mux can select a sensor or reference voltage before it reaches a shared amplifier and analog-to-digital converter. The matched resistance reduces channel-to-channel calibration effort, while the 8:1 organization supports compact systems requiring numerous analog inputs.

Design the surrounding circuit to keep selected signals within the mux's specified analog range and provide appropriate source and return paths. Because charge injection and off-channel behavior can create transient or crosstalk errors, allow settling time between channel changes and place the mux close to the sensitive amplification stage. The 28-pin PDIP format also requires adequate through-hole clearance and appropriate protection against electrostatic discharge during handling.

This product record combines manufacturer family information, commercial listing attributes, package details, selection guidance, and practical PCB considerations. It also distinguishes true pin-compatible MAX307 family members from broader multiplexers that may perform similar routing functions but require a different footprint or interface.

Drop-in alternatifler için MAX307CPI+ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

MAX307CPI

✅ Yerleştirme
📦 28-pin PDIP
Same dual 8:1 architecture, less-than-100-ohm on-resistance class, and 28-pin PDIP footprint; core electrical differences are 0%, while the ordering suffix may identify commercial-grade treatment.

📋 Katalogda Olmayan Referans Alternatifi

MAX307CPI-

✅ Yerleştirme
📦 28-pin PDIP
Same dual 8:1 architecture and 28-pin PDIP pin arrangement; core resistance and channel-count differences are 0%, with ordering suffix used to distinguish the device treatment.

📋 Katalogda Olmayan Referans Alternatifi

MAX307EPI+

✅ Yerleştirme
📦 28-pin PDIP
Same dual 8:1 topology and less-than-100-ohm on-resistance class with identical 28-pin PDIP footprint; core channel and resistance differences are 0%, while temperature coverage differs by ordering grade.

📋 Katalogda Olmayan Referans Alternatifi

MAX307CPE+

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 28-pin PDIP
Same dual 8:1 topology and 28-pin PDIP footprint with no change to the less-than-100-ohm on-resistance class; ordering suffix distinguishes the commercial-temperature treatment.

📋 Katalogda Olmayan Referans Alternatifi

MAX307CSE+

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 28-pin PDIP
Same dual 8:1 topology, 8 channels per section, and 28-pin PDIP footprint; core channel-count and on-resistance differences are 0%, with the ordering suffix identifying the device grade.

📋 Katalogda Olmayan Referans Alternatifi

MAX307CPI+ Özellikler

Multiplexer Configuration Dual 8:1 analog multiplexer
Number of Circuits 2 circuits
Number of Channels per Circuit 8 channels
Total Multiplexed Channels 16 channels
On-Resistance Less than 100 ohm
Channel Resistance Matching Within 5 ohm between channels
Maximum On-Resistance Variation 7 ohm over the specified analog signal range
Supply Voltage Range 5 V to 30 V
Charge Injection Less than 10 pC
Process Technology Improved 44 V silicon-gate CMOS process
Paket 28-pin PDIP
Montaj Türü Through-hole
RoHS Compliance Unknown
REACH Compliance Unknown

MAX307CPI+ 28-pin pdip Pin Yapısı Kılavuzu

MAX307CPI+ (28-pin pdip paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

28-pin pdip paket pin çizelgesi için MAX307CPI+

Ayrıntılı pin çıkış verisi mevcut değil: MAX307CPI+.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX307CPI+ için uygundur 6 uygulamas: Precision Data Acquisition, Automated Test Equipment, Industrial Sensor Interfacing, Process Control Signal Conditioning, Signal Characterization, Multichannel Instrumentation.

📟

Precision Data Acquisition

The MAX307CPI+ fits a multichannel data-acquisition front end because its two independent 8:1 sections can route 16 analog inputs toward shared measurement circuitry. On-resistance below 100 ohms limits voltage-divider error, while matching within 5 ohms helps reduce channel-dependent gain variation. Place each multiplexer close to the amplifier or converter input and establish a defined settling interval after changing channels. Verify that every sensor voltage remains inside the specified analog range and that the selected source impedance does not degrade settling performance.

🖥️

Automated Test Equipment

The MAX307CPI+ can route multiple test nodes into a common measurement amplifier, comparator, or instrument input. Its matched on-resistance reduces the channel-to-channel measurement differences that otherwise complicate calibration tables. The dual 8:1 organization offers useful routing flexibility while retaining a single 28-pin PDIP footprint. Place the device near the instrumentation connector or protected test node, provide a low-leakage return path, and allow enough settling time for the complete measurement chain before capturing a result.

🏭

Industrial Sensor Interfacing

The MAX307CPI+ is suitable for consolidating multiple industrial sensor outputs into a single analog signal chain. Its less-than-100-ohm on-resistance provides a practical compromise between low insertion resistance, switching behavior, and integration density. Because channel resistance is matched within 5 ohms, production calibration can be more consistent across similarly conditioned inputs. Guard the external circuitry against industrial transients, confirm the allowable common-mode and analog signal range, and keep long sensor wiring away from sensitive multiplexer and amplifier traces.

⚙️

Process Control Signal Conditioning

The MAX307CPI+ can select pressure, temperature, level, or current-derived voltages for a shared process-control input. Two 8:1 sections support more signals than a single 8:1 bank while keeping the external routing controlled. Resistance matching within 5 ohms limits channel-related gain drift, although the final error budget must still include sensor accuracy, wiring, amplifier offset, and conversion error. Use short traces, a stable analog ground plane, and input protection appropriate to the industrial environment.

📡

Signal Characterization

The MAX307CPI+ is useful when a laboratory or production system must compare several analog sources under nearly identical loading conditions. Its resistance matching within 5 ohms and flat on-resistance over the specified range help minimize loading-induced differences between channels. Route selected signals directly to the measurement amplifier when possible to avoid adding board-level impedance. Before starting a sweep, verify settling time, off-channel isolation, and the input level required by the downstream instrument.

🔧

Multichannel Instrumentation

The MAX307CPI+ supports compact instrumentation in which multiple analog inputs share an amplifier, reference, or data converter. Sixteen total channels in a 28-pin PDIP package reduce external routing complexity compared with using two separate multiplexers. The monolithic CMOS implementation also provides consistent on-resistance across channels, which is important when instrument gain settings are reused across channels. Decouple the supply close to the device, maintain a continuous ground reference, and follow the manufacturer pinout when assigning the two selector interfaces.

Önerilen Ürünler Özeti

MAX307CPI+ Maxim Integrated Kullanıldığı Yer: Precision Data Acquisition, Automated Test Equipment, Industrial Sensor Interfacing, Process Control Signal Conditioning, Signal Characterization, Multichannel Instrumentation MAX307CPI Pin-compatible MAX307 family member Kullanıldığı Yer: Precision Data Acquisition, Process Control Signal Conditioning MAX307EPI+ Temperature-graded MAX307 family option Kullanıldığı Yer: Automated Test Equipment MAX306CPI+ Related MAX306 precision mux family Kullanıldığı Yer: Industrial Sensor Interfacing MAX307CPI- Pin-compatible MAX307 ordering option Kullanıldığı Yer: Signal Characterization MAX307CPE+ Pin-compatible commercial-grade family member Kullanıldığı Yer: Multichannel Instrumentation
What is the MAX307CPI+ used for?
The MAX307CPI+ is used to route two independent banks of eight analog inputs through a shared signal path. It contains two precision 8:1 CMOS analog multiplexers in a 28-pin PDIP package. According to the Analog Devices MAX307 product page, the devices provide on-resistance below 100 ohms with channel resistance matched within 5 ohms. Typical uses include data acquisition, instrumentation, automated test systems, and multichannel sensor interfaces.
What are the key specifications of MAX307CPI+ that engineers should know?
The MAX307CPI+ combines two 8:1 muxes, a 5 V to 30 V supply range, less than 100 ohms on-resistance, and resistance matching within 5 ohms between channels. Its monolithic CMOS construction uses Maxim's improved 44 V silicon-gate process, while the specified charge injection is less than 10 pC. The component is packaged as a 28-pin PDIP and is intended for precision analog routing rather than high-voltage power switching.
Is MAX307CPI+ the same as MAX307CPI?
The MAX307CPI+ and MAX307CPI denote closely related orderable versions of the same MAX307 dual 8:1 multiplexer family. Both are associated with the 28-pin PDIP configuration and the same basic precision-mux architecture. Ordering-code suffixes can identify commercial grade, temperature coverage, or packaging treatment, so the manufacturer ordering guide should be checked before treating a suffix as a functional substitute for a qualified production BOM.
What can replace MAX307CPI+?
The closest confirmed drop-in replacement is another pin-compatible 28-pin PDIP member of the MAX307 family, subject to its temperature grade and ordering suffix. A 16-channel or dual 8:1 device with a different package should not be treated as a direct replacement even if its channel count is similar. Use the Request a Quote form on this page when a lifecycle or sourcing review is required for the exact replacement MPN.
What is the best cross-brand equivalent for MAX307CPI+?
No cross-brand equivalent can be confirmed as a drop-in replacement from the available cross-reference information. A valid equivalent must duplicate the 28-pin PDIP footprint, dual 8:1 topology, 5 V to 30 V supply capability, and approximately 100 ohm or lower on-resistance. Before approving another manufacturer’s part, verify its pinout, control logic, channel matching, charge injection, supply limits, and temperature range against the MAX307 manufacturer datasheet.
Where can I download the MAX307CPI+ datasheet PDF?
The official MAX307 documentation is available from the Analog Devices product page at https://www.analog.com/en/products/max307.html. Open the Data Sheet resource associated with the MAX306/MAX307 family and confirm that the document covers the MAX307CPI+ ordering code. The family datasheet is the controlling document for the pin configuration, electrical characteristics, operating limits, and ordering information.
Where can I find the MAX307CPI+ pinout and package drawing?
The MAX307CPI+ pinout and package drawing are identified in the official MAX306/MAX307 family data sheet and product documentation on the Analog Devices MAX307 page. The device uses a 28-pin PDIP package. Before laying out a board, assign every physical pin from the family pin-description table and verify the DIP orientation mark; do not infer pin functions from adjacent dual-multiplexer parts that may use a different control or channel arrangement.
What is the on-resistance of MAX307CPI+?
The MAX307CPI+ has an on-resistance of less than 100 ohms, according to the Analog Devices MAX307 family information. The channel resistance is matched to within 5 ohms between channels, and the resistance remains flat over the specified analog signal range with a maximum variation of 7 ohms. These characteristics help minimize channel-dependent attenuation and calibration differences when several inputs share one amplifier or converter.
How much charge injection does MAX307CPI+ produce?
The specified charge injection of the MAX307CPI+ is less than 10 pC. Charge injection is the unwanted voltage pulse delivered into the connected node when a multiplexer changes channels. Because the pulse can create a transient error in a high-impedance measurement path, allow the signal to settle before sampling and use the recommended source impedance and protection arrangements from the manufacturer documentation.
Is MAX307CPI+ suitable for a data-acquisition system?
Yes, the MAX307CPI+ is suitable for a multichannel precision data-acquisition system. Two 8:1 sections can route 16 analog inputs toward shared measurement circuitry, while resistance matching within 5 ohms limits channel-dependent errors. The design must still verify the allowable analog signal range, off-channel isolation, switching time, source impedance, and settling requirements for the selected measurement bandwidth.
When should I choose MAX307CPI+ over another MAX307 family member?
Choose the MAX307CPI+ when the design requires a dual 8:1 precision multiplexer in a 28-pin PDIP package and the associated commercial operating grade is appropriate for the product. Select another family member when a different temperature rating or ordering treatment is required but its pinout remains identical. The defining engineering requirements are channel count, package, supply range, control interface, temperature grade, and qualification status.
MAX307CPI+ vs MAX306CPI - which is better for an 8:1 application?
Choose the MAX307CPI+ for a design built around two independent 8:1 analog multiplexers, because the device is specifically identified as a 16-channel or dual 8:1 family member. The MAX306CPI belongs to the related MAX306 family and should be selected only after confirming its channel architecture against the system requirement. Compare pin functions, control signals, package, temperature grade, and electrical limits rather than relying only on the family name.
Where can I buy MAX307CPI+ online?
Use the Request a Quote form on this page to request the exact MAX307CPI+ order code, current availability, and production lead time. The form is the appropriate channel for a firm procurement request because inventory and lifecycle conditions can change independently of the product documentation. Specify the 28-pin PDIP package, required quantity, and any temperature-grade or traceability requirements in the request.
What is the price of MAX307CPI+?
The current commercial price for the exact MAX307CPI+ should be obtained through the Request a Quote form on this page. The structured pricing area is updated from qualifying supply-channel data, while the product's final commercial terms can depend on quantity, package form, and production status. Request the quantity break that matches the scheduled build so procurement can evaluate the appropriate supply tier.
What is the lead time and stock status for MAX307CPI+?
Current stock and lead time for the exact MAX307CPI+ should be confirmed through the Request a Quote form on this page. Analog Devices identifies the MAX307 as a production family, but stocking status at a given quantity can differ from general lifecycle status. Provide the planned order quantity, target delivery date, acceptable packaging, and quality documentation requirements when requesting a supply commitment.

Mühendislik referans verileri: MAX307CPI+ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX307CPI+ when the design requires two precision 8:1 analog multiplexers, a 28-pin PDIP footprint, less than 100 ohms on-resistance, and a commercial operating grade. MAX307CPI and MAX307CPI- provide the same core dual 8:1 architecture and pin-compatible 28-pin PDIP layout, so compare their ordering suffix, temperature coverage, lifecycle condition, and production traceability before substitution. MAX307EPI+ is the logical same-footprint choice when the family ordering code indicates a different temperature treatment. MAX307CPE+ and MAX307CSE+ likewise retain the dual 8:1 architecture and PDIP footprint but must be checked against the exact qualification requirement. Do not choose a MAX306 member for a mechanical replacement without reviewing its channel count, selector logic, and pinout. The MAX307CPI+ is most appropriate when channel resistance matching and compact dual-multiplexer integration matter more than a smaller surface-mount footprint.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX307CPI MAX307CPI- MAX307EPI+ MAX307CPE+ MAX307CSE+
Package 28-pin PDIP 28-pin PDIP 28-pin PDIP 28-pin PDIP 28-pin PDIP 28-pin PDIP
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Multiplexer Configuration Dual 8:1 Dual 8:1 Dual 8:1 Dual 8:1 Dual 8:1 Dual 8:1
Total Channels 16 channels 16 channels 16 channels 16 channels 16 channels 16 channels
On-Resistance Less than 100 ohm Less than 100 ohm Less than 100 ohm Less than 100 ohm Less than 100 ohm Less than 100 ohm
Channel Resistance Matching Within 5 ohm Within 5 ohm Within 5 ohm Within 5 ohm Within 5 ohm Within 5 ohm
Supply Voltage Range 5 V to 30 V 5 V to 30 V 5 V to 30 V 5 V to 30 V 5 V to 30 V 5 V to 30 V
Charge Injection Less than 10 pC Less than 10 pC Less than 10 pC Less than 10 pC Less than 10 pC Less than 10 pC
Process Technology Improved 44 V silicon-gate CMOS process Improved 44 V silicon-gate CMOS process Improved 44 V silicon-gate CMOS process Improved 44 V silicon-gate CMOS process Improved 44 V silicon-gate CMOS process Improved 44 V silicon-gate CMOS process
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

Ana Farklılayıcılar

  • Two complete 8:1 mux sections in one package (karşılaştırma:MAX306CPI)
  • Matched channel resistance reduces calibration variation (karşılaştırma:MAX307CPI)
  • Low on-resistance for shared analog signal paths (karşılaştırma:MAX307EPI+)

Tasarım Notları

Treat the mux output as a switched capacitance rather than an ideal zero-impedance node. Charge injection of less than 10 pC can still create a measurable transient when the selected node has high source impedance. Minimize the impedance of the downstream amplifier input, place the mux close to that input, and include a defined post-switch settling interval before conversion or comparison.

Route the multiplexed signal as a short, continuous path between the selected source, the MAX307CPI+ pin, and the receiving amplifier. Avoid long shared traces and unnecessary test-point stubs because parasitic capacitance increases settling time. Keep the analog ground return continuous under and around the device, and place supply bypassing close to the package power pins using the manufacturer’s recommended capacitance and voltage-rating guidance.

Do not substitute the MAX307 for the MAX306 solely because both are precision CMOS multiplexers from the same family. Confirm the dual 8:1 versus 16:1 topology, selector logic, pin assignments, and supply limits. For every MAX307 ordering suffix, also verify the commercial or extended-temperature grade so a mechanically compatible part does not create an out-of-temperature operating condition.

Use the 28-pin PDIP package orientation mark as the physical reference and assign every connection from the family pin-description table. Keep each multiplexer section’s control and signal pins grouped logically on the schematic even though the package is shared. Maintain adequate through-hole spacing and consider a socket when the assembly requires replacement or temperature cycling during system validation.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The MAX307 product page identifies the family as production, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MAX307CPI+ ordering code.

Veri doğrulanma tarihi: 2026-11-14 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MAX307CPI+ datasheet MAX307CPI+ datasheet pdf MAX307CPI+ pinout MAX307CPI+ 28 pin PDIP MAX307CPI+ dual 8:1 multiplexer MAX307CPI+ on resistance MAX307CPI+ equivalent MAX307CPI+ replacement MAX307CPI+ vs MAX307CPI MAX307CPI+ vs MAX306CPI MAX307CPI+ price MAX307CPI+ stock Maxim Integrated MAX307CPI+ MAX307CPI+ data acquisition MAX307CPI+ schematic

İlgili Bileşenler ve Terimler

Maxim Integrated MAX307CPI+ MAX307CPI MAX307CPI- MAX307EPI+ MAX307CPE+ MAX307CSE+ MAX306CPI analog multiplexer precision CMOS multiplexer analog switch interface IC integrated circuit dual 8:1 multiplexer 16-channel analog mux on-resistance channel resistance matching charge injection 44 V silicon-gate CMOS process 28-pin PDIP PDIP package through-hole mounting data acquisition industrial sensor interface automated test equipment
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle