Maxim Integrated

MAX311EPE - 8-Channel RF Video Multiplexer | Maxim Integrated

MPN: MAX311EPE ✓ نشط
Plus or minus 15 V Vdss 250 ohms maximum Rds(on) 16-pin DIP Package
الحد الأدنى للطلب: 1 |

MAX311EPE نظرة عامة

The Maxim Integrated MAX311EPE is an 8-channel CMOS RF/video multiplexer packaged in a 16-pin DIP. The device is designed to route one of eight input signals to a common output, with an on-resistance of up to 250 ohms and switching times of up to 1 microsecond. According to the manufacturer datasheet, the MAX311 family provides off-channel isolation guaranteed at -66 dB at 5 MHz and typical power consumption of 1.1 mW when operated with plus or minus 15 V power supplies.

An RF/video multiplexer is a signal-routing semiconductor that selects among multiple analog inputs and connects the selected channel to an output. In the broader hierarchy, it belongs to the switch and multiplexer family, the interface IC category, and ultimately the semiconductor and signal-path component classes. This distinction from a digital multiplexer is important: the MAX311EPE carries analog or RF signals and therefore depends on off-state isolation, on-state resistance, bandwidth, and switching speed rather than digital logic levels.

Key features include eight multiplexed channels, CMOS construction, a maximum on-resistance of 250 ohms, and maximum on and off times of 1 microsecond. The high-frequency isolation characteristic helps prevent an unselected input from coupling energy into the selected output. With positive and negative 15 V supplies, the supported input signal range extends from +12 V to -15 V, allowing bipolar analog signals to be routed while the device remains in the analog signal path.

Technically, the MAX311EPE uses complementary CMOS switching structures to control the analog channels. When one address is asserted, the corresponding input is connected to the output; the address decoder and enable logic determine which channel conducts. The -66 dB off-isolation guarantee at 5 MHz is especially relevant when adjacent sources carry high-frequency video or RF content, because it limits crosstalk between the active and inactive inputs. The 250-ohm maximum on resistance must also be included in gain-loss and impedance calculations for downstream receivers.

Typical applications include video test equipment, RF signal-routing systems, instrumentation, broadcast and professional video interfaces, and analog measurement setups where several signal sources must share a receiver or analyzer. The MAX311EPE is most appropriate where bipolar signal handling and channel isolation matter more than very low on resistance. Systems operating at substantially higher frequencies or requiring lower insertion loss should verify bandwidth and impedance behavior against the complete circuit rather than relying only on the isolation rating.

A key design consideration is the interaction between switching transients, grounding, and downstream input capacitance. Keep the selected signal path short, maintain a low-impedance return connection, and use the manufacturer pin-description table when assigning address and control traces. Verify the positive and negative supply sequencing requirements, bypass each supply rail close to the device, and account for the 1-microsecond maximum transition time when the muxed receiver cannot tolerate channel-switch transients.

This page combines the available manufacturer-level electrical characteristics, packaging information, sourcing guidance, and application engineering notes into a design-oriented overview. It also highlights where a replacement must be checked against the original 16-pin DIP footprint, pin functions, supply arrangement, signal range, isolation, on-resistance, and switching timing rather than being selected from channel count alone.

بدائل مباشرة لـ MAX311EPE — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

MAX311CPE

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 16-pin DIP
Same 8-channel architecture and 16-pin DIP footprint; operating-temperature grade differs by 25 °C, while channel count, isolation, voltage class, and typical 1.1 mW power are unchanged.

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX311EWE

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 16-pin DIP
Same 8-channel, 16-pin DIP electrical configuration and ±15 V operating class; the alternate suffix identifies a different manufacturer ordering configuration rather than a different channel or package architecture.

📋 بديل مرجعي (غير موجود في الكتالوج)

5962-9455602MEA

✅ بديل مباشر
📦 16-pin DIP
Same 16-pin DIP form factor and broadly similar CMOS RF/video multiplexing function; the cross-reference report states that some electrical characteristics differ, requiring verification of voltage ratings, isolation, control logic, and pin assignment.

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX311EPE المواصفات

Number of Channels 8 channels
Device Type CMOS RF/video multiplexer
Signal Configuration 8-channel RF/video analog multiplexer
On Resistance 250 ohms maximum
On Time 1 us maximum
Off Time 1 us maximum
Off-Channel Isolation -66 dB at 5 MHz
Input Signal Range +12 V to -15 V with plus or minus 15 V power supplies
Typical Power Consumption 1.1 mW
جهد التغذية Plus or minus 15 V
العلبة 16-pin DIP
Technology CMOS

دليل تكوين أطراف MAX311EPE 16-pin dip

تكوين الأطراف لـ MAX311EPE (حزمة 16-pin dip). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 16-pin dip لـ MAX311EPE

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX311EPE.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MAX311EPE مناسب لـ 6 التطبيقs: RF Channel Selection, Professional Video Signal Routing, Automated Test Instrumentation, Analog Signal Patch Panels, Broadcast Equipment Signal Selection, Industrial Interface Multiplexing.

🌐

RF Channel Selection

The MAX311EPE is appropriate for routing one of several RF sources into a shared receiver or measurement chain. Its eight-channel architecture simplifies selection without requiring eight separate RF switches, while the guaranteed -66 dB off isolation at 5 MHz limits coupling from inactive sources. The 250-ohm maximum on resistance should be included in the insertion-loss calculation. Designers should also allow for the 1-microsecond maximum switching interval and verify that downstream circuitry settles before a measurement is captured.

📺

Professional Video Signal Routing

The MAX311EPE can select among eight video or composite-style analog sources when the system operates within its documented bipolar signal range. The -66 dB off-isolation rating at 5 MHz helps reduce crosstalk when neighboring channels contain energetic video content. Designers should calculate the voltage division introduced by the 250-ohm maximum on resistance and the source impedance, then confirm settling within the 1-microsecond maximum on and off times. Proper grounding and short signal routes remain essential for stable video performance.

🖥️

Automated Test Instrumentation

The MAX311EPE is suitable for test systems that route multiple sources into a common measuring instrument. Eight channels reduce the number of discrete switching elements, and the 1-microsecond maximum transition times support reasonably fast source selection. The device's 250-ohm maximum on resistance must be included in the instrument input-loading analysis, while -66 dB off isolation at 5 MHz helps limit interaction between active and inactive sources. For precision measurements, validate source impedance, termination, settling time, and channel-to-channel crosstalk in the complete fixture.

🔧

Analog Signal Patch Panels

The MAX311EPE can serve as the active element in an analog patch panel that routes eight inputs to one measurement or processing channel. Its CMOS implementation and 250-ohm maximum on resistance suit moderate-level bipolar signals, while the -66 dB off-isolation characteristic helps maintain channel separation at 5 MHz. The circuit must include suitable source and load impedances, and the routing should minimize loop area. Engineers should also prevent control-code transitions from causing invalid transients during source changes.

📡

Broadcast Equipment Signal Selection

Broadcast and professional media equipment can use the MAX311EPE to select among eight analog video or related baseband sources. The eight-channel architecture provides compact routing, and the specified -66 dB off isolation at 5 MHz is valuable when adjacent channels carry high-frequency content. The 250-ohm maximum on resistance introduces source-dependent attenuation that must be included in gain planning. Because transitions can reach 1 microsecond, downstream synchronization and blanking requirements should be checked before using the device inside a live video path.

🏭

Industrial Interface Multiplexing

The MAX311EPE can consolidate several bipolar analog signals in an industrial interface or diagnostic system. It is most useful where one receiver or controller must inspect multiple sources sequentially and the system can tolerate the maximum 250-ohm on resistance. The 1-microsecond on and off times support relatively quick selection, while -66 dB off isolation at 5 MHz improves separation between channels. Protection, grounding, supply bypassing, and source-voltage compliance must be evaluated independently of the multiplexer ratings to keep the industrial interface reliable.

ملخص المنتجات الموصى بها

MAX311EPE Maxim Integrated يُستخدم في: RF Channel Selection, Professional Video Signal Routing, Automated Test Instrumentation, Analog Signal Patch Panels, Broadcast Equipment Signal Selection, Industrial Interface Multiplexing MAX311MJE Related MAX311-family device requiring package and grade review يُستخدم في: RF Channel Selection, Automated Test Instrumentation, Broadcast Equipment Signal Selection MAX311 Related MAX311-series multiplexer family يُستخدم في: Professional Video Signal Routing, Analog Signal Patch Panels, Industrial Interface Multiplexing
What is the MAX311EPE?
The MAX311EPE is an 8-channel CMOS RF/video multiplexer in a 16-pin DIP package. According to the Maxim Integrated manufacturer datasheet, it routes one selected analog input to a common output, supports a +12 V to -15 V input signal range with plus or minus 15 V supplies, and has a maximum on-resistance of 250 ohms. It is intended for professional video, RF routing, instrumentation, and test-equipment signal paths.
How many channels does the MAX311EPE have?
The MAX311EPE has eight multiplexed signal channels. According to the Maxim Integrated manufacturer datasheet, the device is a CMOS RF/video multiplexer with one common output and an address-controlled selection mechanism. The eight-channel count is a functional requirement to verify first when comparing replacements, but channel count alone does not establish drop-in compatibility; the pinout, electrical limits, and timing must also match.
What is the on-resistance of the MAX311EPE?
The MAX311EPE has a maximum on-resistance of 250 ohms. According to the Maxim Integrated manufacturer datasheet, this resistance applies to the conducting analog switch path. The value should be included when calculating voltage loss, insertion loss, source loading, and signal attenuation. A candidate replacement with a lower on-resistance may improve signal integrity but is not automatically a drop-in substitute if its pinout or supply requirements differ.
What are the switching times of the MAX311EPE?
The MAX311EPE has a maximum on time of 1 microsecond and a maximum off time of 1 microsecond. According to the Maxim Integrated manufacturer datasheet, these values characterize the analog switching behavior of the eight-channel device. They are important when the downstream receiver has a settling window, when a source changes frequently, or when channel-transition transients could corrupt a sampled measurement.
What is the off-channel isolation of the MAX311EPE?
The MAX311EPE provides off-channel isolation guaranteed at -66 dB at 5 MHz. According to the Maxim Integrated manufacturer datasheet, this high isolation is a key feature of the MAX310/311 family and limits coupling from inactive channels into the selected output. The figure is particularly useful for RF and video systems where adjacent channels may contain high-amplitude content, although total system crosstalk also depends on routing and shielding.
What signal range can the MAX311EPE handle?
The MAX311EPE supports an input signal range of +12 V to -15 V when operated from plus or minus 15 V power supplies. According to the Maxim Integrated manufacturer datasheet, this bipolar range distinguishes the device from simple low-voltage CMOS analog switches. Designers should still verify that every source voltage, transient, and termination remains inside the absolute maximum and operating limits shown in the datasheet.
Where can I download the MAX311EPE datasheet PDF?
The MAX311EPE datasheet PDF is available through the manufacturer-document link on this page and through the listed technical-document sources. According to the Maxim Integrated manufacturer datasheet, it contains the authoritative pin description, electrical characteristics, switching tables, absolute maximum ratings, and application information. Use that document for final PCB routing, supply sequencing, and input-versus-output voltage checks before releasing a design.
Where can I find the MAX311EPE pinout?
The MAX311EPE pinout is defined by the pin-configuration and pin-description sections of the Maxim Integrated manufacturer datasheet. The part uses a 16-pin DIP package, but a correct package drawing alone does not identify address, enable, supply, ground, and signal pins. Assign PCB nets from the numbered manufacturer pin table and verify counter-clockwise numbering for the selected 16-pin DIP footprint.
What is the best drop-in replacement for MAX311EPE?
No confirmed drop-in replacement for the MAX311EPE is identified. A valid replacement must use the same 16-pin DIP footprint and preserve the address and enable pin functions, plus or minus 15 V supply arrangement, 250-ohm maximum on-resistance class, 1-microsecond switching limits, and analog signal-range requirements. Use the Request a Quote form on this page for availability and sourcing support rather than assuming a similar-channel-count multiplexer is interchangeable.
Can the MAX311MJE replace the MAX311EPE?
The MAX311MJE should not be treated as a confirmed drop-in replacement for the MAX311EPE. The comparison result identifies it as a MAX311-family part in a CDIP-16 package, while the MAX311EPE is specified in a 16-pin DIP package. The package construction differs, and a replacement must also be checked for temperature grade, pin functions, supply requirements, isolation, timing, and signal-range compatibility before PCB reuse is considered.
When should I choose the MAX311EPE over a similar multiplexer?
Choose the MAX311EPE when an eight-channel RF/video routing stage requires bipolar analog signals, a 16-pin DIP implementation, plus or minus 15 V operation, and guaranteed -66 dB off-channel isolation at 5 MHz. Its 250-ohm maximum on resistance makes it better suited to moderate-impedance signal paths than very low-resistance modern MOSFET multiplexers. Choose another device only after confirming topology, logic levels, bandwidth, insertion loss, and pin compatibility.
Is the MAX311EPE suitable for RF and video test equipment?
The MAX311EPE is suitable for RF and video test equipment that routes moderate-impedance bipolar signals within the stated operating limits. According to the Maxim Integrated manufacturer datasheet, it provides eight channels, 1-microsecond maximum switching times, and -66 dB off isolation at 5 MHz. These characteristics suit channel selection and signal routing, while instrumentation accuracy still depends on source impedance, termination, cable loss, and receiver noise.
How much power does the MAX311EPE consume?
The MAX311EPE typically consumes 1.1 mW with plus or minus 15 V power supplies. According to the Maxim Integrated manufacturer datasheet, the value describes typical power consumption for the device in its specified operating context. Actual system consumption depends on supply voltage, selected-channel behavior, control logic, and board leakage, so thermal analysis should use the appropriate worst-case conditions from the datasheet.
Where can I buy MAX311EPE online and check stock?
Use the Request a Quote form on this page to request MAX311EPE pricing, current stock status, minimum order quantity, and lead time. The form routes the request through XAIPART without embedding a static price that could become stale. Include the required package form, production quantity, and target delivery date in the request to obtain a current sourcing response.
What are the key specifications of MAX311EPE that engineers should know?
The critical MAX311EPE specifications are eight channels, CMOS RF/video multiplexing, a 250-ohm maximum on resistance, 1-microsecond maximum on and off times, -66 dB off isolation at 5 MHz, a +12 V to -15 V input range, and 1.1 mW typical consumption with plus or minus 15 V supplies. According to the Maxim Integrated manufacturer datasheet, the device uses a 16-pin DIP package. These values define the initial compatibility and signal-integrity checklist.
What can replace MAX311EPE?
A MAX311EPE replacement should be selected as a complete pin-compatible 16-pin DIP multiplexer, not merely an eight-channel RF switch. Required checks include address and enable logic, bipolar supply arrangement, maximum on resistance, on and off timing, off isolation, input signal range, and absolute maximum ratings. No candidate is presented as a confirmed drop-in replacement on this page, so use the Request a Quote form to discuss an approved sourcing path.

بيانات مرجعية هندسية لـ MAX311EPE — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the MAX311EPE when the design needs an eight-channel RF/video multiplexer in a 16-pin DIP, operates from plus or minus 15 V, and handles bipolar signals within the +12 V to -15 V range. Its -66 dB off isolation at 5 MHz is particularly useful for high-frequency routing, while the 1-microsecond switching limits support electronic channel selection. Treat the 250-ohm maximum on resistance as a central design constraint and confirm downstream loading before committing to the topology.

Do not select a generic eight-channel switch based only on channel count. A valid alternative must preserve the 16-pin footprint, address and enable functions, power connections, logic levels, absolute maximum ratings, on resistance, switching times, isolation, and signal range. The MAX311MJE is a related family member, but its CDIP-16 construction requires a separate package, temperature-grade, and electrical review rather than an automatic drop-in substitution. Use the Request a Quote form to discuss current sourcing and an approved replacement path.

المقارنة مع البدائل

المعامل هذا المنتج
Brand Maxim Integrated
Package 16-pin DIP
Number of Channels 8 channels
Device Type CMOS RF/video multiplexer
On Resistance 250 ohms maximum
On Time 1 us maximum
Off Time 1 us maximum
Off-Channel Isolation -66 dB at 5 MHz
Input Signal Range +12 V to -15 V with plus or minus 15 V supplies
Typical Power Consumption 1.1 mW

أبرز الفروقات

  • Guaranteed high-frequency off isolation (مقابلGeneral-purpose eight-channel CMOS analog switch)
  • Bipolar analog signal range (مقابلSingle-supply low-voltage analog multiplexer)
  • Defined channel-transition timing (مقابلGeneral-purpose mechanical or relay switch)

ملاحظات التصميم

Include the 250-ohm maximum on resistance in the source-to-receiver voltage-divider calculation. For a receiver with high input impedance, the loss is usually modest; for a 50-ohm source and lower-impedance load, attenuation may be more important. Check the selected channel for settling after the 1-microsecond maximum transition time, especially when the downstream circuit samples immediately following an address change.

Route the selected analog output as a short, direct path and keep the return connection continuous to minimize coupling from inactive channels. Place supply-bypass components close to the appropriate pins, separate the address and enable traces from the RF or video node, and maintain a stable ground reference. A compact layout helps preserve the -66 dB off-isolation benefit at 5 MHz and reduces sensitivity to board-level interference.

Do not treat the MAX311EPE as a modern low-resistance RF switch without recalculating insertion loss. Its input signal range of +12 V to -15 V is tied to plus or minus 15 V operation, so source transients must remain within the absolute maximum limits. Also avoid changing channels while the downstream receiver is interpreting the output unless the system provides blanking or sufficient settling time for the 1-microsecond maximum switching interval.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The technical document lists the device as a Maxim Integrated CMOS RF/video multiplexer; no explicit RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification statement is identified.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MAX311EPE datasheet MAX311EPE datasheet pdf MAX311EPE pinout MAX311EPE equivalent MAX311EPE replacement MAX311EPE 8 channel multiplexer MAX311EPE on resistance MAX311EPE off isolation MAX311EPE 16 pin DIP MAX311EPE RF video mux MAX311EPE price MAX311EPE stock Maxim Integrated MAX311EPE MAX311EPE vs MAX311MJE

المكونات والمصطلحات ذات الصلة

Maxim Integrated MAX311EPE MAX311MJE MAX311 MAX310/311 RF/video multiplexer analog multiplexer CMOS interface IC semiconductor 8-channel signal routing on resistance off-channel isolation switching time bipolar analog signal 16-pin DIP RF signal path video signal routing test instrumentation plus or minus 15 V supply semiconductor package
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر