Analog Devices

MAX317ESA+ - 35Ω Precision SPST CMOS Switch | Analog Devices

MPN: MAX317ESA+ ✓ نشط
10V to 30V Vdss Less than 250pA at +25°C and less than 6nA at +85°C Id 35Ω maximum Rds(on) 8-SOIC (NSOIC) Package
الحد الأدنى للطلب: 1 |

MAX317ESA+ نظرة عامة

Analog Devices MAX317ESA+ is a precision, normally closed, single-pole single-throw CMOS analog switch with 35Ω on resistance, one channel, 8-SOIC packaging, and operation across 10V to 30V supplies. The device accepts dual supplies ranging from ±4.5V to ±20V, making it suitable for bipolar analog-signal routing where a conventional single-supply switch cannot accommodate the full signal range.

An analog switch is an electronically controlled semiconductor device that connects or isolates circuit nodes. The MAX317 belongs to the CMOS analog-switch hierarchy, where low on resistance and low leakage preserve signal integrity through a switched path. Its normally closed architecture keeps the two external signal terminals connected when the control input is inactive and disconnects them when the control input is asserted.

The MAX317 family combines on resistance below 35Ω with resistance matching within 2Ω between channels. The on-resistance profile remains flat across the analog signal range, with a maximum change of 3Ω in the manufacturer’s characterization. Leakage is less than 250pA at +25°C and less than 6nA at +85°C, helping preserve high-impedance measurements and reduce loading on adjacent circuits.

The MAX317 uses a monolithic CMOS implementation optimized for precision signal switching rather than power switching. Its low-leakage behavior is particularly useful when the switched node has a high source impedance, where even a small parasitic current can create a meaningful voltage error. The normally closed function should also be considered carefully because the default signal path differs from a normally open analog switch.

Typical uses include precision test and measurement equipment, data-acquisition front ends, analog signal isolation, sample-and-hold systems, and bipolar instrument switching. In these applications, the switch can route instrumentation signals while keeping the selected channel in a defined connection state. The MAX318 and MAX319 family members provide normally open and SPDT alternatives for designs requiring different default behavior.

When laying out the circuit, keep analog traces short and connect the device ground pins to the signal-return reference. Avoid placing the switch where its on resistance would create excessive attenuation in a high-impedance measurement path. Verify the supply polarity, control-logic levels, and maximum signal voltage before applying power, particularly in dual-supply systems.

This product overview combines the manufacturer’s switch characteristics with practical routing guidance, package information, lifecycle context, and a conservative drop-in replacement assessment for engineers evaluating the MAX317ESA+ footprint.

بدائل مباشرة لـ MAX317ESA+ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MAX317ESA+ (نفس عامل الشكل والبصمة) — يختلف في Dual-Supply Operating Range, On-Resistance Matching, Package, Single-Supply Operating Range.

Analog Devices
Dual-Supply Operating Range: 10 V to 30 V
On-Resistance Matching: 3 ohm maximum
Package: 8-pin NSOIC
قارن مع MAX317ESA+ →

MAX317CSA+

✅ بديل مباشر
📦 8-SOIC (NSOIC)
Same 35Ω MAX317-family on resistance and NC SPST function; temperature-grade suffix differs, with the exact operating range requiring comparison.

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX317ESA

✅ بديل مباشر
📦 8-SOIC (NSOIC)
Same MAX317ESA electrical and pin configuration; order-code suffix and temperature-grade designation differ by no more than the manufacturer-defined family limit.

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX317CSA

✅ بديل مباشر
📦 8-SOIC (NSOIC)
Same normally closed SPST MAX317 function and 35Ω on resistance; temperature-grade suffix differs from MAX317ESA+.

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX317ESA+ الحدود القصوى والخصائص الكهربائية

Switch Type Single-pole single-throw (SPST), normally closed (NC)
Number of Channels 1 channel
On Resistance 35Ω maximum
On-Resistance Matching Within 2Ω between channels
On-Resistance Variation Across Signal Range 3Ω maximum
Off Leakage Current Less than 250pA at +25°C and less than 6nA at +85°C
Single-Supply Operating Range 10V to 30V
Dual-Supply Operating Range ±4.5V to ±20V
Signal Configuration 1:1
Technology CMOS
العلبة 8-SOIC (NSOIC)
عدد الأطراف 8 pins
نوع التركيب Surface mount
Production Status Production
Manufacturer Document Revision Revision 1

دليل تكوين أطراف MAX317ESA+ 8-soic (nsoic)

تكوين الأطراف لـ MAX317ESA+ (حزمة 8-soic (nsoic)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 8-soic (nsoic) لـ MAX317ESA+

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX317ESA+.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MAX317ESA+ مناسب لـ 6 التطبيقs: Precision Test and Measurement Signal Routing, Data Acquisition Front Ends, Analog Signal Isolation, Bipolar Instrumentation Inputs, Sample-and-Hold Signal Paths, Battery-Powered Portable Instruments.

🖥️

Precision Test and Measurement Signal Routing

The MAX317ESA+ fits precision instrument front ends that route bipolar analog signals while requiring low leakage and repeatable path resistance. Its on resistance is specified below 35Ω, with channel matching within 2Ω and less than 3Ω variation across the analog range. These characteristics help limit insertion error when the switch is part of a measurement amplifier or source-selection network. The normally closed configuration can preserve continuity when the control signal is inactive, although the source impedance must be high enough for the 35Ω path resistance to remain acceptable. Use the 8-SOIC footprint with a continuous signal-ground reference and validate the complete signal chain against the required measurement accuracy.

🧩

Data Acquisition Front Ends

The MAX317ESA+ can isolate selected analog inputs in a data-acquisition front end because its off leakage is below 250pA at +25°C and below 6nA at +85°C. Low leakage reduces input-loading errors in high-impedance sensor and divider networks, while the normally closed path provides a defined connection state. The 35Ω maximum on resistance may be significant with low-impedance sources, so the complete source impedance and acquisition-system input range should be checked. Dual-supply operation from ±4.5V to ±20V supports bipolar signals without requiring a separate level-shifting stage.

🔧

Analog Signal Isolation

The MAX317ESA+ is suitable for isolating a sensitive analog node while its on resistance remains below 35Ω and leakage stays low. Its resistance matching within 2Ω and variation of no more than 3Ω across the signal range support predictable insertion loss when several channels are compared. The normally closed behavior is useful where loss of control should leave the instrument connected, but it also means the control driver must actively disconnect the path. Keep switched traces away from high-speed digital and switching-supply nodes, and provide a low-impedance return connection to reduce coupling into the selected signal.

⚡

Bipolar Instrumentation Inputs

The MAX317ESA+ supports bipolar analog signals through an operating range of ±4.5V to ±20V, making it appropriate for instrumentation circuitry that handles signals around ground. Its monolithic CMOS implementation provides low leakage and a flat on-resistance characteristic across the analog range. In a high-gain amplifier input, the 35Ω path resistance can interact with input bias current and source impedance, so those values should be included in the error budget. The inactive connection remains closed, which can support continuity monitoring or fail-safe instrument states when that behavior is explicitly required.

📱

Sample-and-Hold Signal Paths

The MAX317ESA+ can provide controlled connectivity in sample-and-hold signal paths where leakage and resistance consistency affect acquisition accuracy. Leakage below 250pA at +25°C limits the error introduced when a high-impedance hold capacitor is connected to a high-impedance source. Its normally closed state allows the path to remain connected until an active control signal commands isolation, supporting designs that favor continuity during power transitions. The 35Ω on resistance should be compared with the source and capacitor impedance because it contributes directly to settling time and thermal-noise behavior.

🔋

Battery-Powered Portable Instruments

The MAX317ESA+ can be used in portable measurement equipment when a precision analog signal must be routed within a compact 8-SOIC footprint. Its low-leakage CMOS construction reduces loading on battery-powered sensor circuits, and the device supports both 10V to 30V single-supply and ±4.5V to ±20V dual-supply arrangements. The exact supply current is not stated on the product page, so battery-life calculations must use the manufacturer data sheet. Grounding and decoupling should follow the data-sheet layout guidance to prevent control glitches or ground current from disturbing the selected analog path.

ملخص المنتجات الموصى بها

MAX318ESA Normally open SPST companion for alternate default routing يُستخدم في: Precision Test and Measurement Signal Routing, Data Acquisition Front Ends, Analog Signal Isolation, Sample-and-Hold Signal Paths, Battery-Powered Portable Instruments MAX319ESA SPDT companion for break-before-make routing يُستخدم في: Precision Test and Measurement Signal Routing, Data Acquisition Front Ends, Bipolar Instrumentation Inputs, Sample-and-Hold Signal Paths MAX317CSA+ Same-family NC SPST switch for temperature-grade alternatives يُستخدم في: Analog Signal Isolation, Bipolar Instrumentation Inputs, Battery-Powered Portable Instruments
What is the MAX317ESA+?
The MAX317ESA+ is a precision, normally closed, single-pole single-throw CMOS analog switch in an 8-SOIC package. According to the manufacturer’s MAX317 product page and datasheet, it provides one 1:1 signal path, on resistance below 35Ω, resistance matching within 2Ω between channels, and support for 10V to 30V single supplies or ±4.5V to ±20V dual supplies.
What are the key specifications of MAX317ESA+ that engineers should know?
The MAX317ESA+ combines a 35Ω maximum on resistance, within-2Ω channel matching, and less than 3Ω variation across the analog signal range. According to the manufacturer’s MAX317 documentation, off leakage is below 250pA at +25°C and below 6nA at +85°C. The device is a normally closed SPST switch with an 8-SOIC package and operating supply options of 10V to 30V or ±4.5V to ±20V.
Is MAX317ESA+ normally open or normally closed?
The MAX317ESA+ is normally closed, meaning its switched signal path is connected when the control input is inactive. The manufacturer identifies the MAX317 as the normally closed member of a related family, while the MAX318 is normally open and the MAX319 is SPDT. Confirm the required power-off behavior before treating the MAX317 as a replacement for either topology.
What is the on resistance and leakage of MAX317ESA+?
The MAX317ESA+ has a maximum on resistance of 35Ω and an off-leakage current below 250pA at +25°C. According to the manufacturer’s MAX317 family characterization, leakage remains below 6nA at +85°C. The combination can be useful in high-impedance analog circuits, although the switch’s 35Ω resistance may still be significant when the source impedance is very low.
What voltage supplies can MAX317ESA+ operate from?
The MAX317ESA+ supports 10V to 30V single-supply operation and ±4.5V to ±20V dual-supply operation. The manufacturer identifies the device as a precision CMOS analog switch intended for bipolar and wide-range analog signals. Check the control-input thresholds against the selected supply because the allowable logic levels depend on the supply configuration.
Where can I download the MAX317ESA+ datasheet PDF?
The official MAX317ESA+ technical information is available from the Analog Devices product page at https://www.analog.com/en/products/max317.html. From that page, open the MAX317 data-sheet documentation link labeled “Precision, SPST, CMOS Analog Switches Data Sheet (Rev. 1).” Use the manufacturer’s pin-description table and electrical characteristics when assigning PCB connections and validating operating limits.
Where can I find the MAX317ESA+ pinout?
The MAX317ESA+ pinout is documented in the manufacturer’s MAX317 data sheet, Revision 1, linked from the official product page. The device uses an 8-SOIC package, and the pin-description table should be used when connecting the control input, supply rails, common terminal, and switched terminal. Check every connection against the selected single- or dual-supply configuration before fabrication.
Is MAX317ESA+ suitable for precision measurement and test equipment?
The MAX317ESA+ is suitable for precision test and measurement signal routing when its resistance and leakage meet the source impedance of the instrument. According to the manufacturer’s family documentation, the on-resistance profile varies by no more than 3Ω across the analog signal range, while leakage is below 250pA at +25°C. Its normally closed default path can also support fail-safe signal continuity requirements.
What can replace MAX317ESA+?
A pin-compatible replacement must use the 8-SOIC footprint and preserve the normally closed SPST behavior; changing to a normally open or SPDT device alters the unpowered signal path. Cross-reference results identify MAX317CSA+ as a closely related MAX317-family device, while ADG417BRZ-REEL is presented as a functional comparator rather than a confirmed MAX317ESA+ drop-in. Validate pin assignments, control levels, and default state before substitution.
Is MAX317ESA+ the same as MAX317CSA+?
The MAX317ESA+ and MAX317CSA+ belong to the same normally closed SPST MAX317 family and are compared as pin-compatible temperature-grade variants. Their performance is closely aligned, but suffix codes can identify different temperature ranges, package options, or qualification details. According to the manufacturer’s product-selection information, confirm the exact suffix, operating range, and order code before treating one as a drop-in replacement for the other.
When should I choose MAX317ESA+ over MAX318ESA?
Choose the MAX317ESA+ when the circuit requires a normally closed path, meaning the signal remains connected until the control input changes the switch state. Choose the MAX318ESA when a normally open path is required. According to Analog Devices, both are precision SPST CMOS analog switches in the MAX317-family family, but their default connection states differ and must match the system’s fail-safe behavior.
MAX317ESA+ vs MAX318ESA - which is better for a fail-safe analog signal path?
The MAX317ESA+ is better when fail-safe means the analog path should remain connected in the inactive state because it is normally closed. The MAX318ESA is normally open and therefore disconnects the path when inactive. Both devices are precision SPST CMOS switches with on resistance below 35Ω, so the deciding factor is the required default state rather than basic switch resistance.
Is MAX317ESA+ suitable for bipolar analog signal switching?
Yes, the MAX317ESA+ is designed for bipolar analog-signal operation with ±4.5V to ±20V dual supplies. Its low-leakage behavior helps reduce errors in high-impedance paths, while the flat on-resistance characteristic supports consistent signal transfer across the analog range. The exact maximum signal excursion and control thresholds should be verified in the manufacturer data sheet for the intended supply arrangement.
Where can I buy MAX317ESA+ online?
Use the “Request a Quote” form on this page to request current MAX317ESA+ availability, commercial terms, and lead time from XAIPART. The component is identified as a production part by the manufacturer, but current inventory and delivery scheduling can vary by order quantity. Submit the exact MAX317ESA+ suffix and required package quantity with the request.
What is the lead time for MAX317ESA+?
Lead time depends on current inventory, order quantity, and manufacturing schedule, so request a current quotation through the “Request a Quote” form on this page. The manufacturer lists the MAX317 family as production, which supports ongoing sourcing, but it does not by itself guarantee immediate stock or a fixed delivery interval. Provide the required quantity and target schedule for an actionable response.

بيانات مرجعية هندسية لـ MAX317ESA+ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the MAX317ESA+ for an 8-SOIC precision analog-switch design that requires a normally closed SPST path, up to 35Ω on resistance, low leakage, and support for 10V to 30V or ±4.5V to ±20V supplies. MAX317CSA+ is the closest same-family alternative when its suffix-specific temperature grade is appropriate. MAX317ESA and MAX317CSA can also serve existing MAX317-family designs, but their exact ordering and temperature information should be checked before substitution. Do not select the normally open MAX318ESA when the design depends on the MAX317’s inactive-state continuity, and do not use the SPDT MAX319ESA unless an alternate throw is required. For a nonstandard or second-source replacement, verify pin names, control thresholds, leakage over temperature, maximum signal voltage, and the physical lead orientation.

المقارنة مع البدائل

المعامل هذا المنتج MAX317CSA+ MAX317ESA MAX317CSA
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-SOIC (NSOIC) 8-SOIC (NSOIC) 8-SOIC (NSOIC) 8-SOIC (NSOIC)
Switch Type SPST, normally closed SPST, normally closed SPST, normally closed SPST, normally closed
Number of Channels 1 channel 1 channel 1 channel 1 channel
On Resistance 35Ω maximum 35Ω maximum 35Ω maximum 35Ω maximum
On-Resistance Matching Within 2Ω between channels Within 2Ω between channels Within 2Ω between channels Within 2Ω between channels
Off Leakage at +25°C Less than 250pA Less than 250pA Less than 250pA Less than 250pA
Single-Supply Range 10V to 30V 10V to 30V 10V to 30V 10V to 30V
Dual-Supply Range ±4.5V to ±20V ±4.5V to ±20V ±4.5V to ±20V ±4.5V to ±20V
Special Features Flat on-resistance characteristic; maximum variation of 3Ω Flat on-resistance characteristic; maximum variation of 3Ω Flat on-resistance characteristic; maximum variation of 3Ω Flat on-resistance characteristic; maximum variation of 3Ω

أبرز الفروقات

  • Preserves the required normally closed signal path (مقابلMAX318ESA)
  • Matches the MAX317-family pin and switching configuration (مقابلMAX319ESA)
  • Provides a closely related MAX317-family drop-in candidate (مقابلMAX317CSA+)

ملاحظات التصميم

Treat the 35Ω maximum on resistance as an insertion-loss element in the signal path. For a high-impedance source, its effect is usually small; for a low-impedance source, it can create a measurable divider effect with the following input resistance. Also account for the maximum 3Ω on-resistance variation across the analog signal range when determining worst-case gain error. Use the source impedance, switch resistance, and receiver impedance together rather than evaluating the switch in isolation.

Route the switched signal as a compact, continuous analog trace and connect the device ground pins directly to the signal-return reference. Keep the control trace away from sensitive analog conductors to reduce capacitive coupling and control glitches. Because the MAX317 is normally closed, verify the controller state during power-up and reset so the intended path is not unintentionally opened. Follow the manufacturer’s recommended bypass-capacitor arrangement and grounding pattern from the data sheet.

Do not substitute a normally open MAX318 or an SPDT MAX319 without reviewing the power-off behavior. Their package compatibility does not preserve the MAX317’s normally closed signal path. Likewise, confirm the temperature-grade suffix of MAX317CSA+ and MAX317CSA against the system’s ambient-temperature requirement. Validate supply polarity, control thresholds, and allowable analog signal excursion before energizing the circuit.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The MAX317 family is identified as a production analog-switch product, but the manufacturer page and distributor excerpts do not state the individual compliance declarations required for this classification.

عمليات بحث ذات صلة

MAX317ESA+ datasheet MAX317ESA+ pinout MAX317ESA+ datasheet pdf MAX317ESA+ specifications MAX317ESA+ 35 ohm switch MAX317ESA+ normally closed MAX317ESA+ SOIC-8 footprint MAX317ESA+ equivalent MAX317ESA+ replacement MAX317ESA+ vs MAX318ESA Analog Devices MAX317ESA+ MAX317ESA+ price MAX317ESA+ stock MAX317ESA+ lead time MAX317ESA+ analog signal routing

المكونات والمصطلحات ذات الصلة

Analog Devices MAX317ESA+ MAX317CSA+ MAX317ESA MAX317CSA MAX318ESA MAX319ESA MAX317 precision CMOS analog switch SPST switch normally closed switch interface IC analog signal routing on resistance off leakage current 8-SOIC package NSOIC package single-pole single-throw bipolar signal switching data acquisition test and measurement precision instrumentation surface mount on-resistance matching power-off signal continuity
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر