MAX317ESA+ - 35Ω Precision SPST CMOS Switch | Analog Devices
MPN: MAX317ESA+ ✓ AktifMAX317ESA+ Ringkasan
An analog switch is an electronically controlled semiconductor device that connects or isolates circuit nodes. The MAX317 belongs to the CMOS analog-switch hierarchy, where low on resistance and low leakage preserve signal integrity through a switched path. Its normally closed architecture keeps the two external signal terminals connected when the control input is inactive and disconnects them when the control input is asserted.
The MAX317 family combines on resistance below 35Ω with resistance matching within 2Ω between channels. The on-resistance profile remains flat across the analog signal range, with a maximum change of 3Ω in the manufacturer’s characterization. Leakage is less than 250pA at +25°C and less than 6nA at +85°C, helping preserve high-impedance measurements and reduce loading on adjacent circuits.
The MAX317 uses a monolithic CMOS implementation optimized for precision signal switching rather than power switching. Its low-leakage behavior is particularly useful when the switched node has a high source impedance, where even a small parasitic current can create a meaningful voltage error. The normally closed function should also be considered carefully because the default signal path differs from a normally open analog switch.
Typical uses include precision test and measurement equipment, data-acquisition front ends, analog signal isolation, sample-and-hold systems, and bipolar instrument switching. In these applications, the switch can route instrumentation signals while keeping the selected channel in a defined connection state. The MAX318 and MAX319 family members provide normally open and SPDT alternatives for designs requiring different default behavior.
When laying out the circuit, keep analog traces short and connect the device ground pins to the signal-return reference. Avoid placing the switch where its on resistance would create excessive attenuation in a high-impedance measurement path. Verify the supply polarity, control-logic levels, and maximum signal voltage before applying power, particularly in dual-supply systems.
This product overview combines the manufacturer’s switch characteristics with practical routing guidance, package information, lifecycle context, and a conservative drop-in replacement assessment for engineers evaluating the MAX317ESA+ footprint.
Alternatif penggantian untuk MAX317ESA+ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MAX317ESA+ (sama faktor bentuk dan footprint) — berbeda di dalam Dual-Supply Operating Range, On-Resistance Matching, Package, Single-Supply Operating Range.
MAX317CSA+
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX317ESA
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX317CSA
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAX317ESA+ Rating Maksimal & Karakteristik Listrik
| Switch Type | Single-pole single-throw (SPST), normally closed (NC) |
| Number of Channels | 1 channel |
| On Resistance | 35Ω maximum |
| On-Resistance Matching | Within 2Ω between channels |
| On-Resistance Variation Across Signal Range | 3Ω maximum |
| Off Leakage Current | Less than 250pA at +25°C and less than 6nA at +85°C |
| Single-Supply Operating Range | 10V to 30V |
| Dual-Supply Operating Range | ±4.5V to ±20V |
| Signal Configuration | 1:1 |
| Technology | CMOS |
| Paket | 8-SOIC (NSOIC) |
| Jumlah Pin | 8 pins |
| Tipe Mounting | Surface mount |
| Production Status | Production |
| Manufacturer Document Revision | Revision 1 |
MAX317ESA+ 8-soic (nsoic) Diamant Konfigurasi Panduan
Konfigurasi pin untuk MAX317ESA+ (8-soic (nsoic) pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk MAX317ESA+.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MAX317ESA+ cocok untuk 6 aplikasis: Precision Test and Measurement Signal Routing, Data Acquisition Front Ends, Analog Signal Isolation, Bipolar Instrumentation Inputs, Sample-and-Hold Signal Paths, Battery-Powered Portable Instruments.
Precision Test and Measurement Signal Routing
The MAX317ESA+ fits precision instrument front ends that route bipolar analog signals while requiring low leakage and repeatable path resistance. Its on resistance is specified below 35Ω, with channel matching within 2Ω and less than 3Ω variation across the analog range. These characteristics help limit insertion error when the switch is part of a measurement amplifier or source-selection network. The normally closed configuration can preserve continuity when the control signal is inactive, although the source impedance must be high enough for the 35Ω path resistance to remain acceptable. Use the 8-SOIC footprint with a continuous signal-ground reference and validate the complete signal chain against the required measurement accuracy.
Direkomendasikan
Data Acquisition Front Ends
The MAX317ESA+ can isolate selected analog inputs in a data-acquisition front end because its off leakage is below 250pA at +25°C and below 6nA at +85°C. Low leakage reduces input-loading errors in high-impedance sensor and divider networks, while the normally closed path provides a defined connection state. The 35Ω maximum on resistance may be significant with low-impedance sources, so the complete source impedance and acquisition-system input range should be checked. Dual-supply operation from ±4.5V to ±20V supports bipolar signals without requiring a separate level-shifting stage.
Direkomendasikan
Analog Signal Isolation
The MAX317ESA+ is suitable for isolating a sensitive analog node while its on resistance remains below 35Ω and leakage stays low. Its resistance matching within 2Ω and variation of no more than 3Ω across the signal range support predictable insertion loss when several channels are compared. The normally closed behavior is useful where loss of control should leave the instrument connected, but it also means the control driver must actively disconnect the path. Keep switched traces away from high-speed digital and switching-supply nodes, and provide a low-impedance return connection to reduce coupling into the selected signal.
Direkomendasikan
Bipolar Instrumentation Inputs
The MAX317ESA+ supports bipolar analog signals through an operating range of ±4.5V to ±20V, making it appropriate for instrumentation circuitry that handles signals around ground. Its monolithic CMOS implementation provides low leakage and a flat on-resistance characteristic across the analog range. In a high-gain amplifier input, the 35Ω path resistance can interact with input bias current and source impedance, so those values should be included in the error budget. The inactive connection remains closed, which can support continuity monitoring or fail-safe instrument states when that behavior is explicitly required.
Direkomendasikan
Sample-and-Hold Signal Paths
The MAX317ESA+ can provide controlled connectivity in sample-and-hold signal paths where leakage and resistance consistency affect acquisition accuracy. Leakage below 250pA at +25°C limits the error introduced when a high-impedance hold capacitor is connected to a high-impedance source. Its normally closed state allows the path to remain connected until an active control signal commands isolation, supporting designs that favor continuity during power transitions. The 35Ω on resistance should be compared with the source and capacitor impedance because it contributes directly to settling time and thermal-noise behavior.
Direkomendasikan
Battery-Powered Portable Instruments
The MAX317ESA+ can be used in portable measurement equipment when a precision analog signal must be routed within a compact 8-SOIC footprint. Its low-leakage CMOS construction reduces loading on battery-powered sensor circuits, and the device supports both 10V to 30V single-supply and ±4.5V to ±20V dual-supply arrangements. The exact supply current is not stated on the product page, so battery-life calculations must use the manufacturer data sheet. Grounding and decoupling should follow the data-sheet layout guidance to prevent control glitches or ground current from disturbing the selected analog path.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MAX317ESA+ — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | MAX317CSA+ | MAX317ESA | MAX317CSA |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-SOIC (NSOIC) | 8-SOIC (NSOIC) | 8-SOIC (NSOIC) | 8-SOIC (NSOIC) |
| Switch Type | SPST, normally closed | SPST, normally closed | SPST, normally closed | SPST, normally closed |
| Number of Channels | 1 channel | 1 channel | 1 channel | 1 channel |
| On Resistance | 35Ω maximum | 35Ω maximum | 35Ω maximum | 35Ω maximum |
| On-Resistance Matching | Within 2Ω between channels | Within 2Ω between channels | Within 2Ω between channels | Within 2Ω between channels |
| Off Leakage at +25°C | Less than 250pA | Less than 250pA | Less than 250pA | Less than 250pA |
| Single-Supply Range | 10V to 30V | 10V to 30V | 10V to 30V | 10V to 30V |
| Dual-Supply Range | ±4.5V to ±20V | ±4.5V to ±20V | ±4.5V to ±20V | ±4.5V to ±20V |
| Special Features | Flat on-resistance characteristic; maximum variation of 3Ω | Flat on-resistance characteristic; maximum variation of 3Ω | Flat on-resistance characteristic; maximum variation of 3Ω | Flat on-resistance characteristic; maximum variation of 3Ω |
Diferensiator Kunci
- Preserves the required normally closed signal path (vsMAX318ESA)
- Matches the MAX317-family pin and switching configuration (vsMAX319ESA)
- Provides a closely related MAX317-family drop-in candidate (vsMAX317CSA+)
Catatan Desain
Treat the 35Ω maximum on resistance as an insertion-loss element in the signal path. For a high-impedance source, its effect is usually small; for a low-impedance source, it can create a measurable divider effect with the following input resistance. Also account for the maximum 3Ω on-resistance variation across the analog signal range when determining worst-case gain error. Use the source impedance, switch resistance, and receiver impedance together rather than evaluating the switch in isolation.
Route the switched signal as a compact, continuous analog trace and connect the device ground pins directly to the signal-return reference. Keep the control trace away from sensitive analog conductors to reduce capacitive coupling and control glitches. Because the MAX317 is normally closed, verify the controller state during power-up and reset so the intended path is not unintentionally opened. Follow the manufacturer’s recommended bypass-capacitor arrangement and grounding pattern from the data sheet.
Do not substitute a normally open MAX318 or an SPDT MAX319 without reviewing the power-off behavior. Their package compatibility does not preserve the MAX317’s normally closed signal path. Likewise, confirm the temperature-grade suffix of MAX317CSA+ and MAX317CSA against the system’s ambient-temperature requirement. Validate supply polarity, control thresholds, and allowable analog signal excursion before energizing the circuit.
Informasi Konformitas
The MAX317 family is identified as a production analog-switch product, but the manufacturer page and distributor excerpts do not state the individual compliance declarations required for this classification.