Analog Devices

MAX3232EWE-TG068 - 1Mbps RS-232 Transceiver | Analog Devices

MPN: MAX3232EWE-TG068 ✓ نشط
3.0 V to 5.5 V Vdss 16-pin SOIC Package
الحد الأدنى للطلب: 1 |

MAX3232EWE-TG068 نظرة عامة

The Analog Devices MAX3232EWE-TG068 is a true RS-232 transceiver with two drivers and two receivers, operation from 3.0 V to 5.5 V, and data rates up to 1 Mbps in a 16-pin SOIC package. The MAX3232E family is designed for low-power industrial and embedded serial interfaces using 0.1 µF charge-pump capacitors.

A true RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 signals back into logic levels. It belongs to the RS-232 transceiver class, interface IC category, and broader data-conversion and communications-semiconductor hierarchy. Such devices bridge UART, microcontroller, industrial-controller, and data-acquisition equipment across the voltage, noise, and ground-offset differences inherent in RS-232 links.

The principal features of the MAX3232E include a 3.0 V to 5.5 V supply range, operation up to 1 Mbps, and integrated charge-pump circuitry that permits the use of four 0.1 µF capacitors. The 2/2 channel arrangement supports two RS-232 transmit channels and two receive channels in one package. Its 16-pin SOIC format supports conventional surface-mount assembly while conserving board area in compact control and communications equipment.

The MAX3232E architecture is appropriate for systems in which a logic-level UART must communicate with legacy RS-232 peripherals. On-board level translation permits the host side to operate at low digital logic voltages while the cable side uses RS-232 signaling. Charge-pump-assisted drivers produce the required bipolar voltage swings without requiring a separate negative supply. The receiver side restores compatible logic levels while helping the interface withstand the electrical characteristics of a cable-connected RS-232 port.

Typical applications include industrial serial controllers, instrumentation, barcode and identification equipment, point-of-sale terminals, security equipment, and embedded control systems. The 1 Mbps capability is useful for short-distance, higher-speed links where the connected RS-232 equipment supports the same rate. The 3.0 V minimum supply also allows use in modern 3.3 V systems, while the 5.5 V maximum supports conventional 5 V equipment.

PCB implementation requires careful treatment of the charge-pump capacitor network and the RS-232 connector. Place the four 0.1 µF capacitors close to their associated device pins, use a continuous ground plane, and follow the manufacturer datasheet layout to minimize switching noise and capacitor-loop inductance. Confirm the connector's signal and ground assignments before PCB release.

This product summary combines the manufacturer's family specifications, the exact 16-SOIC package identification, lifecycle information, and application-focused guidance. It also distinguishes the readily identifiable same-package replacement from broader functional equivalents so engineers can evaluate board-level compatibility before committing a design to procurement.

بدائل مباشرة لـ MAX3232EWE-TG068 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

MAX3232EWE+

✅ بديل مباشر
📦 16-pin SOIC
Identifies the same MAX3232E 2/2 architecture and 16-SOIC package; the TG068 ordering suffix is not present, so temperature-grade and procurement details must be confirmed.

📋 بديل مرجعي (غير موجود في الكتالوج)

MAX3232EWE-TG068 المواصفات

Product Type RS-232 transceiver
Transceiver Configuration 2/2 transceiver
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
Driver Channels 2
Receiver Channels 2
Charge-Pump Capacitor Value 0.1 µF each; four capacitors required
العلبة 16-pin SOIC
نوع التركيب Surface Mount
Product Status Active

تكوين أطراف MAX3232EWE-TG068

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
دبوس 1 C1+ — Charge-pump capacitor 1 positive terminal
دبوس 2 C1- — Charge-pump capacitor 1 negative terminal
دبوس 3 V+ — Positive charge-pump output
دبوس 4 C2+ — Charge-pump capacitor 2 positive terminal
دبوس 5 C2- — Charge-pump capacitor 2 negative terminal
دبوس 6 VCC — Positive supply voltage
دبوس 7 R1OUT — Receiver 1 logic output
دبوس 8 R2IN — Receiver 2 RS-232 input
دبوس 9 R2OUT — Receiver 2 logic output
دبوس 10 R1IN — Receiver 1 RS-232 input
دبوس 11 V- — Negative charge-pump output
دبوس 12 T1OUT — Driver 1 RS-232 output
دبوس 13 T2OUT — Driver 2 RS-232 output
دبوس 14 T2IN — Driver 2 logic input
دبوس 15 T1IN — Driver 1 logic input
دبوس 16 GND — Ground

التطبيقات النموذجية

MAX3232EWE-TG068 مناسب لـ 6 التطبيقs: Industrial Serial Controllers, Point-of-Sale Terminals, Barcode and Identification Equipment, Data-Acquisition Instruments, Security and Access-Control Equipment, Embedded UART-to-RS-232 Bridges.

🏭

Industrial Serial Controllers

The MAX3232EWE-TG068 fits industrial controllers that need bidirectional RS-232 connectivity to a host computer, operator panel, or service interface. Its two-driver, two-receiver arrangement supports two communications paths in one 16-pin SOIC, while the 3.0 V to 5.5 V supply range is compatible with common embedded control rails. Operation up to 1 Mbps provides margin for short-distance links, although the connected equipment must support the selected baud rate. Follow the manufacturer layout for the four 0.1 µF charge-pump capacitors, and use a solid ground plane and properly terminated RS-232 connector to reduce noise coupling in industrial enclosures.

🏭

Point-of-Sale Terminals

Point-of-sale equipment can use the MAX3232EWE-TG068 to connect a low-voltage controller to a receipt printer, customer display, scanner, or service terminal through RS-232. The integrated level translator converts UART logic to true RS-232 levels without a separate negative supply, while the 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V logic systems. Two transmitters and two receivers permit bidirectional communication on one compact device. Keep the charge-pump capacitors close to their pins and provide a low-impedance chassis or signal-ground return to the connector to maintain reliable operation in retail environments containing motors and switching supplies.

🔧

Barcode and Identification Equipment

The MAX3232EWE-TG068 is appropriate for barcode scanners, label printers, and identification subsystems that exchange serial commands with a host controller over RS-232. The 1 Mbps maximum data rate allows short links to operate above common low-speed serial baud rates, while the 2/2 channel arrangement can support separate command and status paths. Its 16-pin SOIC package helps limit board area in compact scanners. Design the PCB with the manufacturer's recommended capacitor placement, maintain a continuous ground plane, and route the RS-232 traces away from switching nodes and high-current return paths to reduce false triggers and command errors.

🔧

Data-Acquisition Instruments

Laboratory and industrial data-acquisition instruments can use the MAX3232EWE-TG068 to interface a controller or instrument-control computer with legacy RS-232 sensors and peripheral modules. The true RS-232 level translation allows the logic side to operate from a 3.0 V to 5.5 V supply, and the receiver channels convert incoming cable signals to compatible digital levels. Although the device supports rates up to 1 Mbps, practical instrument links commonly operate at lower baud rates, so configure both endpoints consistently. Use short ground returns, isolated cable routing where required, and the exact four 0.1 µF capacitor connections shown in the manufacturer layout.

🎥

Security and Access-Control Equipment

Access-control readers, door controllers, and security peripherals commonly use RS-232 for configuration and diagnostic communication. The MAX3232EWE-TG068 offers two transmit and two receive channels, a 3.0 V minimum supply, and data-rate capability up to 1 Mbps within a compact 16-pin SOIC footprint. Those characteristics support controller boards that need bidirectional communication without a separate negative rail. For deployed equipment, verify the exact suffix temperature range, add connector-level surge protection according to the installation environment, and maintain a continuous ground reference between the logic system and shielded cable. Use the manufacturer's capacitor placement to prevent charge-pump noise from entering sensitive adjacent circuitry.

🧩

Embedded UART-to-RS-232 Bridges

The MAX3232EWE-TG068 is useful in embedded UART-to-RS-232 bridge modules for industrial controls, test equipment, and legacy peripheral connectivity. The interface IC translates between low-voltage UART signals and true RS-232 levels, allowing a microcontroller or programmable controller to connect directly to a DB-style or terminal-style connector. Its 3.0 V to 5.5 V supply range supports common embedded rails, and the 2/2 architecture can serve two independent communication directions or channels. Place all four 0.1 µF charge-pump capacitors directly beside the device, preserve uninterrupted ground planes, and follow the manufacturer's pin-specific layout to minimize emissions and improve noise immunity.

ملخص المنتجات الموصى بها

MAX3232EWE+ Same-family 16-SOIC transceiver candidate يُستخدم في: Industrial Serial Controllers, Point-of-Sale Terminals, Barcode and Identification Equipment, Data-Acquisition Instruments, Security and Access-Control Equipment, Embedded UART-to-RS-232 Bridges MAX3232E MAX3232 direct-replacement family referenced by Analog Devices يُستخدم في: Industrial Serial Controllers, Point-of-Sale Terminals, Barcode and Identification Equipment, Data-Acquisition Instruments, Security and Access-Control Equipment, Embedded UART-to-RS-232 Bridges
What is the MAX3232EWE-TG068?
The MAX3232EWE-TG068 is a 2/2 true RS-232 transceiver with two driver channels and two receiver channels, operation from 3.0 V to 5.5 V, and data rates up to 1 Mbps. According to the Analog Devices MAX3232 product page and manufacturer datasheet, the device is packaged in a 16-pin SOIC and uses four 0.1 µF charge-pump capacitors to generate the bipolar voltage required for RS-232 transmission.
What are the key specifications of MAX3232EWE-TG068?
The MAX3232EWE-TG068 supports a 3.0 V to 5.5 V supply, two transmit channels, two receive channels, and data rates up to 1 Mbps. According to the Analog Devices MAX3232 manufacturer datasheet, its true RS-232 interface requires four 0.1 µF charge-pump capacitors and the exact MAX3232EWE-TG068 is identified in a 16-pin SOIC package. These specifications make it suitable for compact bidirectional serial-interface designs.
Where can I download the MAX3232EWE-TG068 datasheet PDF?
The MAX3232EWE-TG068 datasheet information is available through the Analog Devices MAX3232 product page, which links to the current manufacturer data sheet and technical documentation. The family document covers the 3.0 V to 5.5 V supply range, operation up to 1 Mbps, pin descriptions, charge-pump capacitor requirements, and typical application circuits. Use the Analog Devices page for the latest revision and ordering information.
Where is the MAX3232EWE-TG068 pinout located?
The MAX3232EWE-TG068 pinout is documented in the Analog Devices MAX3232 manufacturer datasheet under the pin-description and package-information sections. The device uses a 16-pin SOIC configuration with separate charge-pump, driver-output, receiver-input, receiver-output, power, and ground connections. Use the pin-description table when assigning PCB nets, particularly for V+ and V− charge-pump capacitor placement.
What is the operating voltage of MAX3232EWE-TG068?
The MAX3232EWE-TG068 operates from 3.0 V to 5.5 V, allowing it to work with common 3.3 V and 5 V digital systems. According to the Analog Devices MAX3232 manufacturer datasheet, the MAX3232 family also supports data rates up to 1 Mbps. The supply selection must account for the voltage required by the attached UART and by the connected RS-232 equipment.
How fast can MAX3232EWE-TG068 transmit RS-232 data?
The MAX3232EWE-TG068 supports RS-232 data rates up to 1 Mbps. According to the Analog Devices MAX3232 manufacturer datasheet, the MAX3232 family is guaranteed to operate up to 1 Mbps with the specified external charge-pump capacitors. Actual link performance also depends on cable length, transceiver loading, grounding, baud-rate tolerance, and the connected equipment.
Can MAX3232EWE+ replace MAX3232EWE-TG068?
The MAX3232EWE+ is the closest identified same-package drop-in candidate for the MAX3232EWE-TG068 because both use the 16-pin SOIC configuration and the MAX3232E 2/2 architecture. The MAX3232EWE+ is identified in the 16-SOIC package on the product listing, while Analog Devices identifies the MAX3232E as the recommended direct replacement for the MAX3232 family. Confirm temperature grade and any suffix-specific procurement requirements before substitution.
What can replace MAX3232EWE-TG068 on the same PCB?
The MAX3232EWE+ is the specifically identified 16-SOIC replacement candidate for the MAX3232EWE-TG068. Analog Devices states that the MAX3232E is an improved direct drop-in replacement for the MAX3232, and the listed MAX3232EWE+ uses the same 16-pin SOIC format. A valid board substitution should still verify pin mapping, temperature range, charge-pump capacitor values, and the exact suffix requirements.
What is the best Texas Instruments equivalent for MAX3232EWE-TG068?
The identified Texas Instruments equivalent path is the MAX3232E family, which Analog Devices identifies as the direct drop-in replacement for MAX3232 devices. However, the cross-reference material does not identify a specific Texas Instruments MPN with a verified 16-pin SOIC footprint, pin mapping, and complete electrical rating. Select a candidate only after checking the manufacturer's data sheet for package, pinout, operating range, and charge-pump requirements.
MAX3232EWE-TG068 vs MAX3232EWE+: which is better for a new design?
The MAX3232EWE+ is the better-supported choice for a new design because its 16-SOIC package and product listing are directly identifiable, while MAX3232EWE-TG068 carries an additional TG068 ordering suffix. Both belong to the MAX3232E interface family with a 2/2 channel arrangement, a 3.0 V to 5.5 V supply, and operation up to 1 Mbps. Review temperature-grade and lifecycle requirements before standardizing the selected MPN.
When should I choose MAX3232EWE-TG068 over another RS-232 transceiver?
Choose MAX3232EWE-TG068 when the design specifically requires the MAX3232E 2/2 RS-232 architecture, a 16-pin SOIC footprint, a 3.0 V to 5.5 V supply, and operation up to 1 Mbps. Its four 0.1 µF charge-pump capacitors and integrated level translation simplify connection to a 3.3 V or 5 V UART. Choose another member only after confirming its pinout, supply range, temperature rating, and channel count against the PCB.
Is MAX3232EWE-TG068 suitable for industrial RS-232 equipment?
The MAX3232EWE-TG068 is suitable for industrial RS-232 interfaces that operate at up to 1 Mbps and use a 3.0 V to 5.5 V supply, subject to temperature and environmental qualification. The Analog Devices product page lists the MAX3232 family as production and active. For industrial deployment, verify the exact TG068 temperature grade, surge and ESD requirements, connector protection, and isolation strategy in the completed system.
What capacitors does the MAX3232EWE-TG068 require?
The MAX3232EWE-TG068 requires four 0.1 µF charge-pump capacitors. According to the Analog Devices MAX3232 manufacturer datasheet, these capacitors support the on-chip charge-pump circuitry that creates the bipolar voltage required by the RS-232 drivers. Place each capacitor close to its designated pins and follow the recommended layout to minimize loop area, switching noise, and supply disturbance.
Where can I buy MAX3232EWE-TG068 online?
The MAX3232EWE-TG068 can be requested through the Request a Quote form on this XAIPART page. The manufacturer product page identifies the MAX3232 family as production and active, while inventory channels list the exact MAX3232EWE-TG068 ordering code. Submit the required quantity, packaging preference, and target date to obtain current commercial terms and availability.
What is the price of MAX3232EWE-TG068?
Current commercial terms for the MAX3232EWE-TG068 are obtained through the Request a Quote form on this page. The structured pricing area is updated as market and supplier conditions change, so a static figure would not represent a reliable current quotation. Provide the required quantity, package or tape-and-reel preference, delivery location, and target date with the request.
What is the lead time and stock status for MAX3232EWE-TG068?
The MAX3232EWE-TG068 is listed as an active product by the manufacturer, and one inventory listing reports 1.504 units available for immediate shipment. Stock levels can change rapidly, so use the Request a Quote form on this page to confirm the current allocation, minimum order quantity, and lead time for the requested quantity. The 1.504-unit report should be treated as a listing snapshot rather than a guaranteed reservation.

بيانات مرجعية هندسية لـ MAX3232EWE-TG068 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MAX3232EWE-TG068 when the BOM, qualification process, or supply plan specifically identifies the TG068 ordering code. Its 3.0 V to 5.5 V supply range, two-driver and two-receiver configuration, and operation up to 1 Mbps suit compact UART-to-RS-232 bridges, industrial controllers, and legacy peripheral interfaces. The MAX3232EWE+ is the closest identified same-package option when that suffix is acceptable and procurement recognizes it as the active family ordering code. Both use a 16-pin SOIC and the same MAX3232E interface arrangement. Before substitution, verify the exact temperature grade, pin assignments, charge-pump capacitor network, lifecycle requirements, and connector protection. Do not select a different-package MAX3232 member solely for similar electrical ratings, because the board footprint and soldering process would require redesign.

المقارنة مع البدائل

المعامل هذا المنتج MAX3232EWE+
Brand Analog Devices Analog Devices
Package 16-pin SOIC 16-pin SOIC - same package
Product Type True RS-232 transceiver 2/2 RS-232 transceiver
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps 1 Mbps
Channel Configuration 2 drivers and 2 receivers 2/2 transceiver
Charge-Pump Capacitors Four 0.1 µF capacitors Four 0.1 µF capacitors
Ordering Suffix MAX3232EWE-TG068 MAX3232EWE+

أبرز الفروقات

  • Exact TG068 ordering-code availability (مقابلMAX3232EWE+)
  • Directly identified 16-SOIC replacement path (مقابلMAX3232EWE+)
  • Single-package dual-channel RS-232 interface (مقابلMAX3232EWE+)

ملاحظات التصميم

Place all four 0.1 µF charge-pump capacitors directly beside the corresponding MAX3232EWE-TG068 pins, following the manufacturer datasheet layout. Keep each capacitor's connection to its device pin short and use the ground-plane return shown in the reference layout. Long capacitor loops increase charge-pump noise, coupling, and supply disturbance, particularly when the interface operates near the 1 Mbps limit.

Route RS-232 connector traces away from switching-regulator power paths, relay outputs, clocks, and high-current motor returns. Maintain a continuous ground plane under the transceiver where practical, and provide the RS-232 connector ground conductor to the interface ground through a short, low-impedance path. This reduces ground offset and prevents charge-pump or switching noise from appearing as data errors.

Do not treat the MAX3232EWE-TG068 and MAX3232EWE+ ordering codes as automatically interchangeable without checking the temperature-grade and suffix requirements. Both are associated with the 16-SOIC MAX3232E family, but procurement qualifications may differ. Also avoid installing a 5 V-only UART at an unsupported logic level merely because the transceiver supply can reach 5.5 V; confirm the host-side voltage thresholds.

Decouple the device close to VCC and GND with the capacitance and placement specified by the Analog Devices datasheet. The MAX3232 family uses charge-pump circuitry, so bypassing and grounding are essential even though the external capacitors are specified at 0.1 µF. Validate the completed board at the intended 1 Mbps data rate and worst-case supply condition to check that switching activity does not corrupt the attached UART link.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Exact environmental and material compliance claims were not identified for the MAX3232EWE-TG068 ordering code.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MAX3232EWE-TG068 datasheet MAX3232EWE-TG068 pinout MAX3232EWE-TG068 equivalent MAX3232EWE-TG068 replacement MAX3232EWE-TG068 price MAX3232EWE-TG068 stock Analog Devices MAX3232EWE-TG068 MAX3232EWE-TG068 16 SOIC MAX3232EWE-TG068 1 Mbps MAX3232EWE-TG068 RS-232 MAX3232EWE-TG068 vs MAX3232EWE+ MAX3232EWE-TG068 application circuit

المكونات والمصطلحات ذات الصلة

Analog Devices Maxim Integrated MAX3232EWE-TG068 MAX3232EWE+ MAX3232E RS-232 transceiver true RS-232 interface IC line driver line receiver UART interface charge-pump converter 16-pin SOIC SOIC family surface-mount package 3.0 V to 5.5 V power supply 1 Mbps data rate 2/2 transceiver RS-232 level translation industrial control point-of-sale terminal barcode scanner data-acquisition instrument embedded UART bridge RoHS REACH
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر