MAX3243EWI+ - 3-5.5V 250kbps RS-232 Transceiver | Analog Devices
MPN: MAX3243EWI+ ✓ نشطMAX3243EWI+ نظرة عامة
An RS-232 transceiver is a line-interface IC that converts logic-level signals into RS-232-compatible levels and converts received RS-232 signals back into digital logic levels. In the broader power-management and signal-chain hierarchy, the MAX3243 belongs to the communication-interface IC family, alongside UART transceivers, RS-422 interfaces, and RS-485 transceivers. Its multichannel arrangement reduces the number of separate level-shifting components required in systems with multiple serial ports.
Key features include a 3.0V to 5.5V supply range, 250kbps operation, automatic shutdown, and automatic wake-up. The MAX3243 family also provides low supply current in shutdown, with a value of 1uA identified for the MAX3243EWI variant. The enhanced ESD protection helps protect the interface when cables are connected, disconnected, or exposed to electrostatic discharge during industrial and laboratory use.
The MAX3243E family is designed for 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. The MAX3243EWI+ combines these communication functions with a relatively small 28-pin surface-mount footprint, allowing designers to conserve board area in equipment where multiple serial channels are needed. Its operating approach is especially useful in portable and industrial systems that must reduce power consumption when the serial link is idle.
Typical applications include industrial control panels, barcode scanners, test and measurement instruments, security equipment, instrumentation interfaces, and embedded systems that expose an RS-232 port to an external host. In these systems, the transceiver provides the physical-layer level conversion between low-voltage CMOS logic and the RS-232 voltage domain.
For PCB implementation, place the transceiver close to the connector and preserve short, appropriately terminated signal routes. Confirm the MAX3243E pin assignments and exposed-pad or package-specific recommendations in the manufacturer datasheet before laying out the board. Input and output protection, cable length, grounding, and the availability of a valid receive signal should be checked together because automatic shutdown depends on valid signal detection.
بدائل مباشرة لـ MAX3243EWI+ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MAX3243EWI+ (نفس عامل الشكل والبصمة) — يختلف في Package, Product Type, Communication Standard, ESD Protection, Supply Voltage Range.
MAX3243EEWI+
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MAX3243EWI+T
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MAX3243EWI
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MAX3243EWI+ المواصفات
| Product Type | RS-232 transceiver |
| Supply Voltage Range | +3.0V to +5.5V |
| معدل البيانات | 250kbps |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Interface Standard | EIA/TIA-232 and V.28/V.24 |
| تيار التغذية | 1uA shutdown current |
| ESD Protection | ±15kV |
| Automatic Shutdown | Yes |
| Automatic Wake-Up | Yes |
| العلبة | 28-pin WSOIC |
| نوع التركيب | Surface mount |
| Operating Voltage | +3V to +5.5V |
| Communication Standard | RS-232 |
| Shutdown Feature | Automatic shutdown with 1uA supply current |
دليل تكوين أطراف MAX3243EWI+ 28-pin wsoic
تكوين الأطراف لـ MAX3243EWI+ (حزمة 28-pin wsoic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX3243EWI+.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MAX3243EWI+ مناسب لـ 6 التطبيقs: Industrial Control Panel Interface, Test and Measurement Instrument, Barcode Scanner and Data Collection, Security and Surveillance Equipment, Instrumentation and Data Acquisition, Embedded Serial Port Expansion.
Industrial Control Panel Interface
The MAX3243EWI+ fits industrial control panels that expose multiple RS-232 signals to a host controller. Three drivers support outbound commands while five receivers allow the controller to monitor several feedback or status inputs. The +3.0V to +5.5V operating range supports both 3.3V embedded systems and 5V legacy logic, while operation up to 250kbps provides margin over common serial-control rates. Automatic shutdown and wake-up help the interface consume less power when the attached equipment is idle, although the complete design should account for grounding, cable length, connector exposure, and the 1uA shutdown current identified for the MAX3243EWI.
موصى به
Test and Measurement Instrument
The MAX3243EWI+ is appropriate for test and measurement instruments that require a compact RS-232 command interface. The device integrates three drivers and five receivers into one 28-pin WSOIC, reducing the number of separate interface components and conserving board area. Its 250kbps maximum data rate supports fast command and measurement-data transfer when the host UART and cable permit. The automatic shutdown function can reduce current demand when no valid receiver activity is present, while enhanced ±15kV ESD protection adds useful robustness at an externally accessible instrument port. Final qualification should include isolation strategy, cable grounding, operator-accessible surge requirements, and the complete enclosure’s EMC behavior.
موصى به
Barcode Scanner and Data Collection
The MAX3243EWI+ can serve as the RS-232 interface in barcode scanners, handheld readers, and point-of-sale data-collection equipment. A three-driver and five-receiver arrangement supports command transmission, handshake signals, and multiple status inputs while keeping the interface compact. Its true +3V operation is valuable for portable equipment built around 3.3V processors, and the part can run from +3.0V to +5.5V for compatibility with mixed-voltage equipment. Automatic shutdown and wake-up are particularly helpful for battery-operated terminals because they reduce consumption during idle periods. The designer should still validate connector wiring, cable length, ground continuity, and ESD exposure because these depend on the external scanner and cable rather than the transceiver alone.
موصى به
Security and Surveillance Equipment
The MAX3243EWI+ is suitable for RS-232 command links in security consoles, access-control equipment, and surveillance-system accessories. The multichannel arrangement allows one interface IC to handle several control and status signals, while its 250kbps capability supports responsive command traffic. The ±15kV ESD protection identified for the MAX3243 family is valuable where a serial port is connected to an external lead, although installed cables may require additional surge protection. Low-power shutdown behavior helps equipment that spends substantial time idle, and the 3.0V-to-5.5V range simplifies integration with mixed embedded and legacy circuitry. Verify the product’s temperature and compliance requirements for the intended deployment rather than inferring them from the interface function.
موصى به
Instrumentation and Data Acquisition
The MAX3243EWI+ can connect a data-acquisition controller to legacy instrumentation over RS-232. Five receivers provide capacity for trigger, status, alarm, and interlock signals, while three drivers can carry commands and data channels. Its 28-pin WSOIC package supports compact multi-channel interface implementation, and the 250kbps rate is suitable for many laboratory and industrial control links. Because automatic shutdown depends on valid receive activity, the firmware and signal flow must ensure that required inputs do not unintentionally keep the interface awake or cause it to enter shutdown unexpectedly. Ground-reference and isolation practices remain important when the connected instrument can develop ground-potential differences.
موصى به
Embedded Serial Port Expansion
The MAX3243EWI+ is useful when an embedded controller needs more RS-232 channels than its integrated UART can provide. A host processor can use logic-level UART signals on one side of the transceiver and RS-232 levels on the external connector side. Integrating three drivers and five receivers into one package reduces routing and component count compared with separate single-channel transceivers. The 3.0V-to-5.5V supply range supports common embedded rails, while automatic shutdown and wake-up improve energy efficiency during idle periods. The design must account for all unused inputs and outputs according to the MAX3243E datasheet, maintain the required charge-pump capacitor connections, and provide clean return paths between the logic ground and the external connector ground.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MAX3243EWI+ — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MAX3243EEWI+ | MAX3243EWI+T | MAX3243EWI |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-pin WSOIC | 28-pin SSOP | 28-pin WSOIC | 28-pin WSOIC |
| Supply Voltage | +3.0V to +5.5V | +3.0V to +5.5V | +3.0V to +5.5V | +3.0V to +5.5V |
| Data Rate | 250kbps | 250kbps | 250kbps | 250kbps |
| Drivers | 3 | 3 | 3 | 3 |
| Receivers | 5 | 5 | 5 | 5 |
| ESD Protection | ±15kV | ±15kV | ±15kV | ±15kV |
| Shutdown Supply Current | 1uA | 1uA | 1uA | 1uA |
| Automatic Shutdown and Wake-Up | Yes | Yes | Yes | Yes |
أبرز الفروقات
- Multichannel RS-232 integration (مقابلMAX3243EEWI+)
- 250kbps interface performance (مقابلMAX3232ECDR)
- Low-power serial interface behavior (مقابلMAX3237CAI+T)
ملاحظات التصميم
Place the MAX3243 close to the RS-232 connector and keep the driver and receiver routes short. Route the supply bypass capacitor directly between the device supply and ground pins, and follow the manufacturer reference layout for the charge-pump capacitor network. Keep the external cable-side ground return close to the corresponding transceiver ground, while maintaining a controlled ground relationship between the logic and connector domains.
Do not assume that every MAX3243E order code has the same mechanical footprint. MAX3243EWI+ is identified as a 28-pin WSOIC option, while MAX3243EEWI+ is identified as a 28-pin SSOP option. Before substituting a part, compare the official package drawing, lead pitch, pin numbering, exposed-pad requirements, and every signal assignment. A matching family name and similar channel count are not sufficient evidence of a PCB drop-in replacement.
Use a supply within the +3.0V to +5.5V range and include local high-frequency bypass plus the manufacturer-recommended charge-pump capacitors. Because automatic shutdown depends on receive-signal validity, verify the system’s normal idle levels and handshake arrangement. A receiver input that is not correctly biased can prevent shutdown, while a transient on an external line can affect wake-up behavior and should be checked against the device’s input limits.
Treat the RS-232 connector as an external electromagnetic and ESD entry point. Keep long unprotected cable routes away from the transceiver, maintain a short ground path to the connector, and evaluate whether the system requires external surge or TVS protection beyond the device’s stated ±15kV ESD capability. Validate the complete assembly for emissions and immunity because cable shielding, chassis grounding, and enclosure leakage can dominate interface performance.
معلومات الامتثال
Compliance information for MAX3243EWI+ is not explicitly stated in the manufacturer product-page snippets or distributor listings. The MAX3243E family is an industrial/communications interface rather than an automotive-qualified device, so AEC-Q100 is treated as not applicable.