Analog Devices

MAX3243EWI+ - 3-5.5V 250kbps RS-232 Transceiver | Analog Devices

MPN: MAX3243EWI+ ✓ Nakahanda
+3.0V to +5.5V Vdss 1uA shutdown current Id 28-pin WSOIC Package
MOQ: 1 |

MAX3243EWI+ Ulas

The Analog Devices MAX3243EWI+ is a +3V to +5.5V RS-232 transceiver with automatic shutdown and wake-up, operating at up to 250kbps in a 28-pin WSOIC package. It combines three RS-232 drivers and five receivers in one interface, making it suitable for compact serial communication equipment, industrial controls, data acquisition systems, and embedded serial links. The device supports true +3V operation and includes enhanced electrostatic-discharge protection rated at ±15kV according to the manufacturer product information.

An RS-232 transceiver is a line-interface IC that converts logic-level signals into RS-232-compatible levels and converts received RS-232 signals back into digital logic levels. In the broader power-management and signal-chain hierarchy, the MAX3243 belongs to the communication-interface IC family, alongside UART transceivers, RS-422 interfaces, and RS-485 transceivers. Its multichannel arrangement reduces the number of separate level-shifting components required in systems with multiple serial ports.

Key features include a 3.0V to 5.5V supply range, 250kbps operation, automatic shutdown, and automatic wake-up. The MAX3243 family also provides low supply current in shutdown, with a value of 1uA identified for the MAX3243EWI variant. The enhanced ESD protection helps protect the interface when cables are connected, disconnected, or exposed to electrostatic discharge during industrial and laboratory use.

The MAX3243E family is designed for 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. The MAX3243EWI+ combines these communication functions with a relatively small 28-pin surface-mount footprint, allowing designers to conserve board area in equipment where multiple serial channels are needed. Its operating approach is especially useful in portable and industrial systems that must reduce power consumption when the serial link is idle.

Typical applications include industrial control panels, barcode scanners, test and measurement instruments, security equipment, instrumentation interfaces, and embedded systems that expose an RS-232 port to an external host. In these systems, the transceiver provides the physical-layer level conversion between low-voltage CMOS logic and the RS-232 voltage domain.

For PCB implementation, place the transceiver close to the connector and preserve short, appropriately terminated signal routes. Confirm the MAX3243E pin assignments and exposed-pad or package-specific recommendations in the manufacturer datasheet before laying out the board. Input and output protection, cable length, grounding, and the availability of a valid receive signal should be checked together because automatic shutdown depends on valid signal detection.

Mga alternatibo na pwedeng ilagay na MAX3243EWI+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3243EWI+ (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, Communication Standard, ESD Protection, Supply Voltage Range.

Analog Devices
Package: 28-pin SOIC
Product Type: Multichannel RS-232 transceiver
ESD Protection: ±15 kV HBM on serial-port connections
Ikabit sa MAX3243EWI+ →
Analog Devices
Package: 28-pin SOIC
Communication Standard: EIA/TIA-232 and V.28/V.24
Ikabit sa MAX3243EWI+ →

MAX3243EEWI+

✅ Drop-In
📦 28-pin SSOP
Same MAX3243E family and 3.0V-to-5.5V RS-232 interface class, but package format and lead dimensions differ from the target WSOIC option; exact pin and footprint equivalence requires datasheet confirmation.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3243EWI+T

✅ Drop-In
Analog Devices
📦 28-pin WSOIC
RS-232 transceiver · 3 channels · 5 channels · 3 V to 5.5 V · 250 kbps · ±15 kV · 1 µA · Full duplex

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3243EWI

✅ Drop-In
📦 28-pin WSOIC
Base MAX3243EWI order code with the same 28-pin WSOIC configuration; the + version is the listed ordering form and may differ in grade or packaging coding.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3243EWI+ Mga Spesipikasyon

Product Type RS-232 transceiver
Supply Voltage Range +3.0V to +5.5V
Rate ng Data 250kbps
Number of Drivers 3
Number of Receivers 5
Interface Standard EIA/TIA-232 and V.28/V.24
Kuru-kuryente ng Pagbibigay 1uA shutdown current
ESD Protection ±15kV
Automatic Shutdown Yes
Automatic Wake-Up Yes
Packhaging 28-pin WSOIC
Uri ng Pagpapasok Surface mount
Operating Voltage +3V to +5.5V
Communication Standard RS-232
Shutdown Feature Automatic shutdown with 1uA supply current

Gabay sa Pin Configuration ng MAX3243EWI+ 28-pin wsoic

Pin configuration para sa MAX3243EWI+ (28-pin wsoic package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 28-pin wsoic package para sa MAX3243EWI+

Wala ng detalyadong pinout data na magagamit para sa MAX3243EWI+.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3243EWI+ ay nararapat para sa 6 aplikasyons: Industrial Control Panel Interface, Test and Measurement Instrument, Barcode Scanner and Data Collection, Security and Surveillance Equipment, Instrumentation and Data Acquisition, Embedded Serial Port Expansion.

🏭

Industrial Control Panel Interface

The MAX3243EWI+ fits industrial control panels that expose multiple RS-232 signals to a host controller. Three drivers support outbound commands while five receivers allow the controller to monitor several feedback or status inputs. The +3.0V to +5.5V operating range supports both 3.3V embedded systems and 5V legacy logic, while operation up to 250kbps provides margin over common serial-control rates. Automatic shutdown and wake-up help the interface consume less power when the attached equipment is idle, although the complete design should account for grounding, cable length, connector exposure, and the 1uA shutdown current identified for the MAX3243EWI.

🖥️

Test and Measurement Instrument

The MAX3243EWI+ is appropriate for test and measurement instruments that require a compact RS-232 command interface. The device integrates three drivers and five receivers into one 28-pin WSOIC, reducing the number of separate interface components and conserving board area. Its 250kbps maximum data rate supports fast command and measurement-data transfer when the host UART and cable permit. The automatic shutdown function can reduce current demand when no valid receiver activity is present, while enhanced ±15kV ESD protection adds useful robustness at an externally accessible instrument port. Final qualification should include isolation strategy, cable grounding, operator-accessible surge requirements, and the complete enclosure’s EMC behavior.

📱

Barcode Scanner and Data Collection

The MAX3243EWI+ can serve as the RS-232 interface in barcode scanners, handheld readers, and point-of-sale data-collection equipment. A three-driver and five-receiver arrangement supports command transmission, handshake signals, and multiple status inputs while keeping the interface compact. Its true +3V operation is valuable for portable equipment built around 3.3V processors, and the part can run from +3.0V to +5.5V for compatibility with mixed-voltage equipment. Automatic shutdown and wake-up are particularly helpful for battery-operated terminals because they reduce consumption during idle periods. The designer should still validate connector wiring, cable length, ground continuity, and ESD exposure because these depend on the external scanner and cable rather than the transceiver alone.

🎥

Security and Surveillance Equipment

The MAX3243EWI+ is suitable for RS-232 command links in security consoles, access-control equipment, and surveillance-system accessories. The multichannel arrangement allows one interface IC to handle several control and status signals, while its 250kbps capability supports responsive command traffic. The ±15kV ESD protection identified for the MAX3243 family is valuable where a serial port is connected to an external lead, although installed cables may require additional surge protection. Low-power shutdown behavior helps equipment that spends substantial time idle, and the 3.0V-to-5.5V range simplifies integration with mixed embedded and legacy circuitry. Verify the product’s temperature and compliance requirements for the intended deployment rather than inferring them from the interface function.

📺

Instrumentation and Data Acquisition

The MAX3243EWI+ can connect a data-acquisition controller to legacy instrumentation over RS-232. Five receivers provide capacity for trigger, status, alarm, and interlock signals, while three drivers can carry commands and data channels. Its 28-pin WSOIC package supports compact multi-channel interface implementation, and the 250kbps rate is suitable for many laboratory and industrial control links. Because automatic shutdown depends on valid receive activity, the firmware and signal flow must ensure that required inputs do not unintentionally keep the interface awake or cause it to enter shutdown unexpectedly. Ground-reference and isolation practices remain important when the connected instrument can develop ground-potential differences.

🔧

Embedded Serial Port Expansion

The MAX3243EWI+ is useful when an embedded controller needs more RS-232 channels than its integrated UART can provide. A host processor can use logic-level UART signals on one side of the transceiver and RS-232 levels on the external connector side. Integrating three drivers and five receivers into one package reduces routing and component count compared with separate single-channel transceivers. The 3.0V-to-5.5V supply range supports common embedded rails, while automatic shutdown and wake-up improve energy efficiency during idle periods. The design must account for all unused inputs and outputs according to the MAX3243E datasheet, maintain the required charge-pump capacitor connections, and provide clean return paths between the logic ground and the external connector ground.

Buod ng mga Inirekomendang Produkto

MAX3243EEWI+ Same-family MAX3243E RS-232 transceiver option Ginagamit sa: Industrial Control Panel Interface, Barcode Scanner and Data Collection, Instrumentation and Data Acquisition MAX3243EWI+T Analog Devices Ginagamit sa: Industrial Control Panel Interface, Test and Measurement Instrument, Barcode Scanner and Data Collection, Security and Surveillance Equipment, Instrumentation and Data Acquisition, Embedded Serial Port Expansion MAX3243EWI Base same-family RS-232 transceiver option Ginagamit sa: Test and Measurement Instrument, Security and Surveillance Equipment, Embedded Serial Port Expansion
What is the operating voltage of MAX3243EWI+?
The MAX3243EWI+ operates from +3.0V to +5.5V. According to the Analog Devices MAX3243 product page and the manufacturer family description, the device is a true +3V RS-232 transceiver and can also operate from a conventional 5V supply. The supply range makes the part appropriate for systems using 3.3V logic, 5V logic, or a mixed supply arrangement. Confirm the exact local supply tolerance and decoupling requirements in the MAX3243E datasheet before finalizing the power architecture.
How fast is the MAX3243EWI+ RS-232 transceiver?
The MAX3243EWI+ supports data rates up to 250kbps. This figure comes from the MAX3243E product information and the manufacturer description of the MAX3243 as a multichannel, high-data-rate EIA/TIA-232 interface. The 250kbps capability is higher than the conventional low-speed RS-232 range commonly associated with legacy PC serial ports. Actual usable rate depends on cable characteristics, receiver thresholds, timing margin, and the connected UART configuration.
How many RS-232 drivers and receivers does MAX3243EWI+ have?
The MAX3243EWI+ provides three RS-232 drivers and five receivers in one 28-pin package. The MAX3243 family description identifies the device as a multichannel RS-232 transceiver, while the manufacturer product page describes the MAX3243E family as a 3V-powered EIA/TIA-232 and V.28/V.24 communications interface. The asymmetric channel count is useful in equipment that needs more receive inputs than transmit outputs, such as multi-drop monitoring and control systems.
Does MAX3243EWI+ have automatic shutdown?
Yes. The MAX3243EWI+ includes automatic shutdown and automatic wake-up functions. The MAX3243E family information identifies automatic shutdown and wake-up as core features, and the MAX3243EWI+ listing identifies a 1uA shutdown supply current. The device can reduce operating power when it does not detect a valid signal level on its receiver inputs, then return to operation when a valid receive signal appears. This behavior is useful for portable and industrial equipment where an idle serial port should not consume unnecessary power.
What ESD protection does MAX3243EWI+ provide?
The MAX3243EWI+ provides enhanced electrostatic-discharge protection identified by the manufacturer as ±15kV. This protection is particularly relevant to RS-232 ports because external cables can accumulate electrostatic charge before being connected to the equipment. The manufacturer identifies the MAX3243 family as offering enhanced ESD protection, but the exact test method and applicable pins should be confirmed in the datasheet. External surge or cable transient requirements may still call for additional protection components.
Where can I download the MAX3243EWI+ datasheet PDF?
The official MAX3243 documentation is available from the Analog Devices product page at https://www.analog.com/en/products/max3243.html. That page links to the MAX3243 data sheet and product documentation, including the MAX3243E family information. For a component-page download, use the Analog Devices documentation link associated with the MAX3243 ordering table and select the revision applicable to MAX3243EWI+. Review the package drawing, pin descriptions, electrical characteristics, and ESD test conditions before releasing a layout.
Where can I find the MAX3243EWI+ pinout?
The MAX3243EWI+ pinout is identified in the MAX3243E manufacturer datasheet under the pin-description and package-information sections. The manufacturer product page provides the official documentation, while the family description identifies the device as a 28-pin RS-232 interface IC. Use the pin-description table for exact signal assignments, especially for driver outputs, receiver inputs, charge-pump capacitors, enable/shutdown controls, and ground connections. Do not infer a replacement footprint from a photograph alone because similarly named MAX3243E order codes can use different package options.
What is the difference between MAX3243EWI+ and MAX3243EEWI+?
MAX3243EWI+ and MAX3243EEWI+ are both members of the MAX3243E family, but the order-code suffix identifies different package and environmental variants. MAX3243EWI+ is listed as the 28-pin WSOIC version, while MAX3243EEWI+ is listed as a 28-pin SSOP version. Because the package dimensions and pin configuration must be verified for each exact suffix, they should not be treated as automatically interchangeable on an existing PCB. Compare the official package drawings and pin tables before substitution.
Is MAX3243EWI+ suitable for industrial control systems?
The MAX3243EWI+ is suitable for industrial control systems that use RS-232 and need low-power shutdown, automatic wake-up, and enhanced ESD protection. Its 3.0V to 5.5V supply range supports modern embedded control electronics, while the 250kbps rate provides margin above common low-speed serial-control rates. For an industrial deployment, also evaluate operating temperature, isolation, grounding, cable length, electromagnetic compatibility, and the ESD requirements of the complete enclosure and connector arrangement.
When should I choose MAX3243EWI+ instead of MAX3232ECDR?
Choose MAX3243EWI+ when the design requires three drivers, five receivers, automatic shutdown and wake-up, and operation from +3V to +5.5V. The MAX3232ECDR is a different RS-232 transceiver family and cannot be assumed to be pin-to-pin compatible with the MAX3243EWI+ 28-pin WSOIC footprint. The comparison result identifies MAX3232ECDR as a separate part with different package and channel characteristics. Use MAX3243EWI+ when its multichannel arrangement and low-power behavior match the system architecture, then verify timing and signal levels.
Can MAX3243EEWI+ replace MAX3243EWI+?
A direct replacement of MAX3243EWI+ by MAX3243EEWI+ requires confirmation of the exact package drawing and pin mapping. MAX3243EWI+ is identified with a 28-pin WSOIC package, whereas MAX3243EEWI+ is identified with a 28-pin SSOP package. Those package options can have different lead dimensions, land patterns, and exposed thermal or thermal-pad arrangements. Check the official data sheets and compare every pin before considering a replacement; otherwise, a PCB respin may be necessary.
What is the best drop-in replacement for MAX3243EWI+?
The MAX3243EWI+ is best replaced by an exact-order-code alternative only after its package, pinout, supply range, channel count, and data rate are verified. The available MAX3243 family cross-reference identifies MAX3243EEWI+ and other MAX3243E order codes, but those results do not establish that every variant is a no-change PCB replacement. For a true drop-in decision, compare the WSOIC land pattern and pin descriptions from each manufacturer document. A same-family device with a different package is not automatically pin-to-pin compatible.
How do I design a MAX3243EWI+ power and decoupling layout?
Use the manufacturer’s recommended pin connections and place the transceiver’s supply bypass capacitor close to the device’s supply and ground pins. The MAX3243 architecture includes charge-pump support components, so the external capacitor network should follow the reference schematic and layout guidance exactly. Keep high-current driver return paths compact and separate from sensitive receiver-return paths where practical. Verify capacitor voltage ratings, tolerance, dielectric requirements, and exposed-pad connection details against the MAX3243E datasheet.
What are the key specifications of MAX3243EWI+ that engineers should know?
The MAX3243EWI+ is a 28-pin WSOIC RS-232 transceiver for +3.0V to +5.5V supplies, with three drivers, five receivers, operation up to 250kbps, automatic shutdown and wake-up, enhanced ±15kV ESD protection, and a stated 1uA shutdown supply current. These specifications place it between logic-level UART pins and external RS-232 lines while reducing board area through channel integration. Verify exact temperature limits, pin assignments, and capacitor values in the manufacturer datasheet.
What can replace MAX3243EWI+ in a serial interface design?
A serial-interface replacement must match the MAX3243EWI+ package, pinout, supply voltage, channel arrangement, data rate, and shutdown behavior. Same-family MAX3243E variants are the natural starting point, including MAX3243EEWI+, but the available cross-reference information does not prove that the SSOP option is pin-to-pin compatible with the WSOIC target. A replacement should therefore be validated against the official package drawings and electrical tables, rather than selected solely by matching the MAX3243 family name.
Where to buy MAX3243EWI+ online and what is its lead time?
Use the “Request a Quote” form on this page to request MAX3243EWI+ availability, current pricing, lead time, and quantity-break terms. The manufacturer product page identifies the MAX3243 family as production and lists the MAX3243EWI+ orderable configuration, while distributor and aggregator pages provide additional sourcing references. Current stock and lead time should be confirmed through the quote request because availability changes by quantity, package suffix, and market conditions.

Impormasyon ng Talumpati sa Engineering for MAX3243EWI+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MAX3243EWI+ when the design needs a compact 28-pin WSOIC RS-232 interface with three drivers, five receivers, operation from +3.0V to +5.5V, data rates up to 250kbps, automatic shutdown, and automatic wake-up. Choose MAX3243EWI+T when the exact electrical configuration is needed with the manufacturer’s +T ordering designation, after confirming the ordering code and package documentation. MAX3243EWI is the base family designation and may be suitable when its grade and packaging terms match the procurement requirement. MAX3243EEWI+ is a same-family choice but is identified as a 28-pin SSOP option, so it is not automatically a no-change replacement for the WSOIC footprint. For any substitution, verify supply range, channel count, pinout, package drawing, shutdown thresholds, and the ESD requirements of the complete product.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3243EEWI+ MAX3243EWI+T MAX3243EWI
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 28-pin WSOIC 28-pin SSOP 28-pin WSOIC 28-pin WSOIC
Supply Voltage +3.0V to +5.5V +3.0V to +5.5V +3.0V to +5.5V +3.0V to +5.5V
Data Rate 250kbps 250kbps 250kbps 250kbps
Drivers 3 3 3 3
Receivers 5 5 5 5
ESD Protection ±15kV ±15kV ±15kV ±15kV
Shutdown Supply Current 1uA 1uA 1uA 1uA
Automatic Shutdown and Wake-Up Yes Yes Yes Yes

Pangunahing mga Pagkakaiba

  • Multichannel RS-232 integration (kumpara saMAX3243EEWI+)
  • 250kbps interface performance (kumpara saMAX3232ECDR)
  • Low-power serial interface behavior (kumpara saMAX3237CAI+T)

Talaan ng Disenyo

Place the MAX3243 close to the RS-232 connector and keep the driver and receiver routes short. Route the supply bypass capacitor directly between the device supply and ground pins, and follow the manufacturer reference layout for the charge-pump capacitor network. Keep the external cable-side ground return close to the corresponding transceiver ground, while maintaining a controlled ground relationship between the logic and connector domains.

Do not assume that every MAX3243E order code has the same mechanical footprint. MAX3243EWI+ is identified as a 28-pin WSOIC option, while MAX3243EEWI+ is identified as a 28-pin SSOP option. Before substituting a part, compare the official package drawing, lead pitch, pin numbering, exposed-pad requirements, and every signal assignment. A matching family name and similar channel count are not sufficient evidence of a PCB drop-in replacement.

Use a supply within the +3.0V to +5.5V range and include local high-frequency bypass plus the manufacturer-recommended charge-pump capacitors. Because automatic shutdown depends on receive-signal validity, verify the system’s normal idle levels and handshake arrangement. A receiver input that is not correctly biased can prevent shutdown, while a transient on an external line can affect wake-up behavior and should be checked against the device’s input limits.

Treat the RS-232 connector as an external electromagnetic and ESD entry point. Keep long unprotected cable routes away from the transceiver, maintain a short ground path to the connector, and evaluate whether the system requires external surge or TVS protection beyond the device’s stated ±15kV ESD capability. Validate the complete assembly for emissions and immunity because cable shielding, chassis grounding, and enclosure leakage can dominate interface performance.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance information for MAX3243EWI+ is not explicitly stated in the manufacturer product-page snippets or distributor listings. The MAX3243E family is an industrial/communications interface rather than an automotive-qualified device, so AEC-Q100 is treated as not applicable.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3243EWI+ datasheet MAX3243EWI+ pinout MAX3243EWI+ datasheet pdf MAX3243EWI+ equivalent MAX3243EWI+ replacement MAX3243EWI+ cross reference MAX3243EWI+ vs MAX3243EEWI+ MAX3243EWI+ footprint MAX3243EWI+ application circuit MAX3243EWI+ price MAX3243EWI+ stock Analog Devices MAX3243EWI+ MAX3243EWI+ RS-232 transceiver MAX3243EWI+ 250kbps

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX3243EWI+ MAX3243EWI+T MAX3243EWI MAX3243EEWI+ RS-232 transceiver RS-232 EIA/TIA-232 V.28 V.24 UART line driver line receiver communication interface IC semiconductor automatic shutdown automatic wake-up ESD protection 250kbps 28-pin WSOIC surface mount industrial control data acquisition test and measurement
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ