Analog Devices

MAX456EPL+ - 8x8 35MHz Video Crosspoint Switch | Analog Devices

MPN: MAX456EPL+ ✓ نشط
40-pin PDIP Package
الحد الأدنى للطلب: 1 |

MAX456EPL+ نظرة عامة

The Analog Devices MAX456EPL+ is an 8 x 8 monolithic CMOS video crosspoint switch with a bandwidth of 35 MHz, supplied in a 40-pin PDIP package. The device routes multiple video signals through a programmable crosspoint matrix, allowing eight inputs to be connected to eight outputs through independently controlled switching paths. Its 8 x 8 configuration, 35 MHz video bandwidth, and through-hole PDIP construction make it suitable for professional video routing, broadcast equipment, surveillance systems, and legacy analog video test installations.

A video crosspoint switch is an interface IC that provides configurable signal paths between multiple source and destination channels. Within the broader signal-chain hierarchy, the MAX456 belongs to video switches, analog multiplexers, interface ICs, and semiconductors. Unlike a simple mechanical video switch, a crosspoint matrix can route many source signals to selected destinations electronically while reducing the component count, board area, and external interconnection complexity of a conventional relay-based matrix.

The MAX456 integrates eight video inputs and eight outputs in one monolithic CMOS device. Its stated 35 MHz bandwidth supports baseband analog video signals, including composite video and other bandwidth-compatible analog sources. Independent matrix control allows operators or system logic to change routing configurations without physically reconnecting cables. The MAX456EPL+ is identified as an industrial-grade 40-pin PDIP version, supporting through-hole PCB assembly and conventional socket-compatible prototyping workflows.

Because the MAX456 is an analog video crosspoint rather than a modern digital video processor, its useful design limits are defined by analog bandwidth, channel isolation, gain behavior, crosstalk, power requirements, and output drive. Those detailed electrical characteristics should be checked in the manufacturer datasheet before cascading multiple devices or driving long cable runs. The monolithic architecture can simplify a matrix implementation, but it does not eliminate the need for source termination, grounding, decoupling, and controlled impedance routing.

Typical uses include television studio routing, CCTV control-room matrices, lecture-capture video distribution, analog video test equipment, and educational video laboratories. The 40-pin PDIP package is particularly useful where field replacement, socket use, or through-hole assembly has greater value than the smaller footprint of a surface-mount option. A one-channel signal can be routed among outputs by configuring the matrix, while full operation permits many simultaneous connections according to the switching commands supplied by the controlling electronics.

The main layout consideration is analog signal integrity. Keep video traces short, maintain a continuous ground reference, decouple supply pins near the device, and avoid routing high-speed digital control or switching-node currents beneath sensitive video paths. Because the MAX456EPL+ is a through-hole device, also plan the connector orientation and analog ground strategy before fabrication. This page consolidates the device identity, package information, design guidance, application fit, and documented same-family alternative for engineers evaluating the legacy 8 x 8 video matrix.

For new designs, verify lifecycle availability, electrical limits, and required switching logic before committing the 40-pin PDIP footprint. Request a Quote through the form on this page for current commercial conditions, and consult the manufacturer datasheet for the definitive pin description, timing, power, and analog performance tables.

بدائل مباشرة لـ MAX456EPL+ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MAX456EPL+ (نفس عامل الشكل والبصمة) — يختلف في Temperature Grade.

Analog Devices
Temperature Grade: Commercial
قارن مع MAX456EPL+ →

MAX456CPL+

✅ بديل مباشر
Analog Devices
📦 40-pin PDIP
8 x 8 video crosspoint switch · Monolithic CMOS · 8 channels · 8 channels · 64 T-switches · Any input to any output or all outputs · 8 internal buffers · 250 V/µs

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MAX456EPL+ الحدود القصوى والخصائص الكهربائية

Product Type 8 x 8 video crosspoint switch
Architecture Monolithic CMOS
Number of Inputs 8 video inputs
عدد المخارج 8 video outputs
Video Bandwidth 35 MHz
Signal Type Analog video
العلبة 40-pin PDIP
Terminal Count 40 terminals
Package Shape Rectangular PDIP
Mounting Method Through-hole
Temperature Grade Industrial
Technology CMOS

دليل تكوين أطراف MAX456EPL+ rectangular pdip

تكوين الأطراف لـ MAX456EPL+ (حزمة rectangular pdip). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة rectangular pdip لـ MAX456EPL+

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MAX456EPL+.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MAX456EPL+ مناسب لـ 6 التطبيقs: Broadcast Video Routing Matrix, CCTV Surveillance Control Room, Video Test and Training Lab, Lecture Capture Video Distribution, Industrial Video Inspection Cell, Analog Video Distribution Wall.

📺

Broadcast Video Routing Matrix

The MAX456EPL+ fits professional analog video routing because its 8 x 8 matrix connects eight video sources to eight destinations under logic control, while its 35 MHz bandwidth covers baseband composite-video requirements. It can replace a much larger collection of mechanical switches and their associated wiring. In a studio or edit-system installation, place the IC near the signal backplane, terminate each source correctly, and preserve a low-impedance ground reference between equipment racks. The principal trade-off is that this is an older analog crosspoint rather than a digital matrix, so modern HD or 4K workflows may require conversion ahead of the switching stage.

🎥

CCTV Surveillance Control Room

An eight-input, eight-output analog surveillance installation can use the MAX456EPL+ to let an operator select which camera feeds appear at multiple monitoring positions. The 8 x 8 topology provides flexible routing without changing every cable whenever a display assignment changes, and the 35 MHz bandwidth is suitable for compatible baseband video signals. Keep camera coax connections and ground paths separated from digital control wiring, terminate unused outputs as required by the system architecture, and verify cable attenuation before expecting the switch bandwidth to translate into acceptable image quality at long cable lengths.

🖥️

Video Test and Training Lab

The MAX456EPL+ is useful in an analog video laboratory where several camera, pattern-generator, and playback sources must be routed to instruments or training displays. Its programmable matrix simplifies repeatable signal-path demonstrations without manually moving cables, and the through-hole PDIP package supports socketed laboratory boards. Because the device is a legacy analog crosspoint, create clearly labeled test channels and document the supported signal format, source impedance, and bandwidth. Adding buffering or line drivers may be necessary when long cables or multiple destination loads exceed the practical drive capability of the switching network.

📱

Lecture Capture Video Distribution

A lecture-capture system can route a podium camera, document camera, room overview camera, and computer video source among recorders, projectors, and confidence monitors by using the MAX456EPL+ as an 8 x 8 analog matrix. Its multiple simultaneous routing paths make it more flexible than a simple single-input selector. Keep the video path isolated from power-converter and display-backlight switching circuits, maintain short ground returns, and ensure every connected source uses compatible amplitude and impedance. If the installation includes digital classroom capture, the switching point remains most useful for legacy composite analog sources rather than modern packetized video links.

🏭

Industrial Video Inspection Cell

Machine-vision monitoring can benefit from the MAX456EPL+ when several analog inspection cameras must be routed to displays, recorders, or vision interfaces. The matrix provides eight source channels and eight destination channels, while the 35 MHz specification supports bandwidth-compatible baseband video. Industrial cabinets can introduce electrical noise, ground potential differences, and long cable runs, so use shielded coax, maintain controlled grounding, and place decoupling close to the IC. Verify camera synchronization and signal-level requirements separately because the crosspoint configuration does not imply frame synchronization or isolation from every camera system.

🖥️

Analog Video Distribution Wall

The MAX456EPL+ can form the central routing element of a small analog distribution wall serving several monitors, recorders, and confidence displays. Eight programmable outputs make it possible to direct the same source to multiple destinations while maintaining flexible control over the visible layout. Route outputs according to the manufacturer loading recommendations and use suitable distribution buffering where output loading or cable loss is significant. The 40-pin PDIP construction is advantageous for repairable equipment, but the board should provide ample component spacing and mechanical clearance for reliable through-hole soldering and socket use.

What is the MAX456EPL+?
The MAX456EPL+ is an 8 x 8 monolithic CMOS video crosspoint switch in a 40-pin PDIP package. According to the Maxim Integrated datasheet, it routes eight analog video inputs to eight outputs through a programmable matrix and has a bandwidth of 35 MHz. It is intended for professional analog video routing, broadcast, surveillance, test equipment, and other multi-source video systems.
What are the key specifications of MAX456EPL+ that engineers should know?
The MAX456EPL+ provides 8 video inputs, 8 video outputs, 35 MHz bandwidth, and monolithic CMOS construction in a 40-pin through-hole PDIP package. The manufacturer datasheet identifies it as an 8 x 8 video crosspoint switch with an industrial temperature grade. Supply voltage, current, isolation, crosstalk, switching time, and detailed temperature limits should be confirmed from the electrical tables before finalizing a design.
Where can I download the MAX456EPL+ datasheet PDF?
The MAX456EPL+ datasheet is available through the Maxim Integrated datasheet link listed on this page and through the component data pages linked in the technical sources. The datasheet contains the definitive 40-pin pin description, video bandwidth details, power requirements, timing information, and recommended application circuit. Download the PDF and use its pin-description table when assigning PCB nets.
Where can I find the MAX456EPL+ pinout?
The MAX456EPL+ uses a 40-pin PDIP, but a verified numbered pin assignment is not shown in the product listing snippets. Use the 40-pin diagram in the Maxim Integrated datasheet to assign every input, output, control, supply, and ground connection. Keep the PCB pin numbering consistent with the counter-clockwise numbering used by the selected 40-pin PDIP package drawing.
How many video inputs and outputs does the MAX456EPL+ have?
The MAX456EPL+ contains an 8 x 8 video switching matrix, meaning eight analog video inputs and eight analog video outputs. Control logic determines which source reaches each destination. The manufacturer describes the device as a monolithic CMOS crosspoint intended to reduce component count, board area, and cost compared with conventional multi-relay video matrices.
What video bandwidth does the MAX456EPL+ support?
The MAX456EPL+ is specified for 35 MHz video bandwidth. This makes it appropriate for baseband analog video systems whose source and cable characteristics remain within that bandwidth. When designing a complete system, include source termination and cable loss in the calculation because the IC's bandwidth rating alone does not guarantee usable picture quality over every cable length or source impedance.
What can replace the MAX456EPL+?
The documented same-family alternative is the Maxim Integrated MAX456CPL+, which shares the MAX456 series identity and is presented as a direct comparison candidate. Its exact electrical grade and full pin compatibility must be checked against the manufacturer datasheets before substitution. The cross-reference search did not identify enough additional same-package parts to provide five qualified drop-in replacements.
Is MAX456CPL+ the same as MAX456EPL+?
MAX456CPL+ and MAX456EPL+ are related Maxim Integrated MAX456-series devices, but their suffix codes should not be assumed to be interchangeable without checking the ordering information. The E and C codes may denote different commercial or temperature treatments. Compare supply limits, temperature grade, package construction, and the complete pin description in the datasheets before approving a direct substitution.
When should I choose MAX456EPL+ over MAX456CPL+?
Choose the MAX456EPL+ when the design requires the specific industrial-grade E-package ordering option and the manufacturer datasheet confirms that its electrical limits fit the installation. Consider MAX456CPL+ when its documented temperature grade, lifecycle status, and electrical characteristics better match the production environment. The deciding factors should be operating temperature, availability, and exact datasheet equivalence rather than the shared MAX456 family name.
Is MAX456EPL+ suitable for analog video routing?
Yes, the MAX456EPL+ is specifically designed as an 8 x 8 analog video crosspoint switch with 35 MHz bandwidth. It fits systems requiring several composite or otherwise bandwidth-compatible video sources to be routed to multiple destinations. Source impedance, cable attenuation, grounding, output loading, and system-level isolation must still be engineered around the device rather than assumed from the bandwidth rating alone.
Where to buy MAX456EPL+ online?
Use the Request a Quote form on this page to request the MAX456EPL+ and confirm current commercial availability, order quantity, packaging, and lead time. The form allows purchasing teams to obtain a direct quotation for the exact MAX456EPL+ ordering code rather than substituting a different temperature grade or package variant. Do not rely on a generic catalog search that may omit suffix-code details.
What is the price of MAX456EPL+?
Current commercial terms for the MAX456EPL+ should be requested through the Request a Quote form on this page. The price can vary with order quantity, production status, and traceability requirements, so a static quotation may not represent a production order. Submit the exact MPN and required quantity so the quotation can be tied to the correct industrial-grade 40-pin PDIP device.
What is the lead time for MAX456EPL+?
The current lead time for MAX456EPL+ should be confirmed through the Request a Quote form on this page. Lead time may depend on the requested quantity, assembly packaging, component condition, and manufacturer lifecycle status. Provide your forecast and target date with the request rather than assuming that the presence of a catalog listing guarantees a production allocation.
Is MAX456EPL+ in stock?
Stock for the exact MAX456EPL+ ordering code should be confirmed through the Request a Quote form on this page. A distributor catalog entry does not by itself establish current inventory, and the E suffix, 40-pin PDIP package, and order quantity can materially affect availability. Submit the required quantity and date so the response reflects the actual procurement position.
What is the best drop-in replacement for MAX456EPL+?
MAX456CPL+ is the closest documented replacement candidate within the Maxim Integrated MAX456 family, but it should be called a qualified alternative only after its complete ordering information and datasheet have been compared with the MAX456EPL+. The cross-reference search found no additional candidates with enough package and parametric evidence for the required five-part drop-in list. Board redesign or package conversion is not a drop-in replacement.

بيانات مرجعية هندسية لـ MAX456EPL+ — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the MAX456EPL+ for an 8 x 8 baseband analog video matrix that requires 35 MHz-class switching in a repairable 40-pin PDIP design. It is especially useful in broadcast, surveillance, training, and industrial systems that can operate with the MAX456EPL+ ordering code and industrial temperature grade. MAX456CPL+ is the closest documented same-family candidate, but compare its exact temperature grade, supply limits, lifecycle status, and pin description before using it as a substitute. Do not select a smaller or surface-mount crosspoint as a direct replacement: changing package dimensions, pin functions, signal levels, or control timing can require a board redesign. For new digital HD or 4K installations, assess whether an analog crosspoint remains appropriate; the MAX456EPL+ is best reserved for compatible legacy analog video infrastructure or systems with an intentional analog switching stage.

المقارنة مع البدائل

المعامل هذا المنتج MAX456CPL+
Manufacturer Maxim Integrated Maxim Integrated
Product Type 8 x 8 video crosspoint switch MAX456-series video crosspoint switch
Package 40-pin PDIP 40-pin PDIP - same
Input Channels 8 video inputs 8 video inputs
Output Channels 8 video outputs 8 video outputs
Video Bandwidth 35 MHz 35 MHz
Architecture Monolithic CMOS Monolithic CMOS
Mounting Method Through-hole Through-hole

أبرز الفروقات

  • Single-chip 8 x 8 routing matrix (مقابلMAX456CPL+)
  • 35 MHz analog video bandwidth (مقابلMAX456CPL+)
  • Repairable through-hole implementation (مقابلMAX456CPL+)

ملاحظات التصميم

Treat the video nets as sensitive analog paths: use a continuous ground plane, avoid long parallel runs with switching or digital return currents, and keep control traces away from input and output pins. Place the IC near the matrix connector or source interface so unnecessary loop area is minimized. For a 40-pin through-hole design, verify connector orientation against the package drawing before routing the first PCB revision.

Confirm source impedance, output loading, insertion loss, and cable attenuation before assigning all eight channels. The stated 35 MHz bandwidth is the device bandwidth, not a guarantee of acceptable signal quality for every source or cable combination. Use proper source termination and follow the recommended output-loading conditions in the manufacturer datasheet; add a line driver or distribution amplifier when long cables or multiple loads would otherwise degrade the signal.

Provide stable supply bypassing at the IC and decouple the analog and control sections according to the manufacturer application circuit. Keep switching-regulator and converter currents physically separated from the video path, and observe each supply pin's voltage limits and sequencing requirements. Because detailed current consumption is not listed in the component summaries, obtain the electrical tables before sizing the regulator or calculating thermal dissipation.

Do not treat a shared family name as proof of drop-in equivalence. MAX456CPL+ appears in a direct comparison with MAX456EPL+, but the C and E suffix codes must be checked for temperature grade, commercial status, and electrical differences. Also confirm that the package has 40 pins in the required PDIP format and that every control, supply, ground, input, and output connection is assigned from the numbered datasheet diagram.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The component summaries do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is an industrial analog interface IC rather than an automotive-qualified device.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MAX456EPL+ datasheet MAX456EPL+ pinout MAX456EPL+ datasheet pdf MAX456EPL+ 40 pin PDIP MAX456EPL+ equivalent MAX456EPL+ replacement MAX456EPL+ vs MAX456CPL+ MAX456EPL+ video crosspoint switch MAX456EPL+ 35MHz bandwidth Maxim Integrated MAX456EPL+ MAX456EPL+ price MAX456EPL+ stock MAX456EPL+ analog video matrix MAX456 8x8 video switch MAX456EPL+ footprint

المكونات والمصطلحات ذات الصلة

Analog Devices Maxim Integrated MAX456EPL+ MAX456CPL+ MAX456 series 8 x 8 video crosspoint switch video switch analog video switch analog multiplexer interface IC monolithic CMOS 35 MHz video bandwidth 40-pin PDIP PDIP package through-hole technology analog signal integrity video routing matrix broadcast video CCTV surveillance industrial video inspection source termination matrix control logic industrial temperature grade video crosspoint semiconductor
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر