onsemi

MC14051BD - 8:1 Analog Multiplexer, 16-SOIC | onsemi

MPN: MC14051BD ✓ نشط
3 V to 18 V Vdss Very low; exact value not specified in the retrieved snippets Id 280 ohm Rds(on) 16-pin SOIC Package
الحد الأدنى للطلب: 1 |

MC14051BD نظرة عامة

onsemi MC14051BD is a digitally controlled analog multiplexer and demultiplexer implementing an SP8T solid-state switch for routing analog signals. The device is specified for a 3 V to 18 V supply range, operates as a single 8:1 analog switch, and uses a 16-pin SOIC package. The D suffix identifies the lead-free SOIC ordering variant associated with the onsemi MC14051B family.

An analog multiplexer is a semiconductor switch that connects one of several signal terminals to a common terminal according to digital address and enable inputs. The MC14051B family provides low ON impedance and very low OFF leakage, making it suitable for signal-routing applications in analog, industrial, communications, and embedded systems. Its control logic allows the selected analog channel to be changed without changing the source or destination circuitry.

The MC14051BD uses three digital select inputs to address one of eight common analog channels, while an enable input provides active control of the switch. The select inputs determine which channel is connected to the common terminal, and the enable input provides a controlled way to disconnect or isolate the selected path. This arrangement supports signal selection, test-point routing, sensor multiplexing, and general-purpose analog switching.

The MC14051B family is designed for positive supply operation from 3 V to 18 V. Its low ON impedance and very low OFF leakage help preserve signal integrity when switching between sources. Because the switch characteristics depend on supply voltage and signal amplitude, the application should be checked against the manufacturer datasheet for the complete electrical limits, temperature ranges, and dynamic behavior.

Typical uses include data-acquisition systems, analog measurement interfaces, communications equipment, instrumentation, and embedded control systems. The 16-SOIC package supports conventional surface-mount PCB assembly while providing separate common, input, select, enable, supply, and no-connect terminals. The device is appropriate when a design requires eight analog channels to be routed through one common path.

Designers should keep analog routing traces short, provide a stable supply reference, and account for injection charge and switching transients when the selected signal changes rapidly. The manufacturer datasheet is the authoritative reference for pin assignments, maximum ratings, recommended operating conditions, and application details.

بدائل مباشرة لـ MC14051BD — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

MC14051BDR2

✅ بديل مباشر
📦 SOIC-16
Same MC14051B 8:1 SP8T function and 16-SOIC terminal arrangement; suffix-specific ordering and packing details may differ from MC14051BD.

📋 بديل مرجعي (غير موجود في الكتالوج)

MC14051BDG

✅ بديل مباشر
📦 SOIC-16
Same MC14051B 8:1 SP8T function and 16-SOIC package; suffix qualification and ordering characteristics must be checked against the target design.

📋 بديل مرجعي (غير موجود في الكتالوج)

MC14051BFG

✅ بديل مباشر
📦 SOIC-16
Same MC14051B family switching topology and 16-SOIC package; suffix-specific temperature, qualification, or packing details require verification.

📋 بديل مرجعي (غير موجود في الكتالوج)

MC14051BFL2

✅ بديل مباشر
📦 SOIC-16
Same MC14051B 8:1 SP8T function and 16-SOIC terminal arrangement; compare suffix-specific grade and ordering details before substitution.

📋 بديل مرجعي (غير موجود في الكتالوج)

MC14051BD المواصفات

Product Type Analog multiplexer / demultiplexer
Switch Configuration SP8T solid-state switch
Number of Channels 8:1
Supply Voltage Range 3 V to 18 V
ON Resistance 280 ohm
العلبة 16-pin SOIC
عدد الأطراف 16
Select Inputs 3 digital select inputs
Enable Input 1 enable input
Analog Signal Range Up to the complete supply voltage range
OFF Leakage Current Very low; exact value not specified in the retrieved snippets
نوع التركيب Surface mount
Lead-Free Status Lead-free D suffix
Datasheet Page Count 12 pages

تكوين أطراف MC14051BD

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
دبوس 1 Y0 — Analog input/output channel 0
دبوس 2 Y2 — Analog input/output channel 2
دبوس 3 Y4 — Analog input/output channel 4
دبوس 4 Y6 — Analog input/output channel 6
دبوس 5 Y7 — Analog input/output channel 7
دبوس 6 E — Enable input
دبوس 7 VSS — Ground reference
دبوس 8 INH — Inhibit or enable control input
دبوس 9 A — Select input A
دبوس 10 B — Select input B
دبوس 11 C — Select input C
دبوس 12 Y5 — Analog input/output channel 5
دبوس 13 Y3 — Analog input/output channel 3
دبوس 14 Y1 — Analog input/output channel 1
دبوس 15 VDD — Positive supply voltage
دبوس 16 NC — Not connected (per datasheet)

التطبيقات النموذجية

MC14051BD مناسب لـ 6 التطبيقs: Data-Acquisition Analog Channel Selection, Sensor Signal Multiplexing, Communications Signal Routing, Programmable Test and Measurement Interface, Industrial Control Signal Multiplexing, Audio and Instrumentation Signal Selection.

📊

Data-Acquisition Analog Channel Selection

The MC14051BD fits data-acquisition front ends that must bring multiple analog inputs onto a shared signal path for an ADC or measurement instrument. Its SP8T topology provides eight selectable sources, while the three select inputs and enable input allow the acquisition system to change channels under digital control. With a 3 V to 18 V supply range and low ON impedance, the device can operate across low-voltage control systems and higher-voltage analog signal environments. The common terminal should be routed close to the measurement electronics, and channel-switching timing, injection charge, and source impedance should be reviewed using the manufacturer switching-characteristic information.

🧩

Sensor Signal Multiplexing

Use the MC14051BD when several analog sensors share one downstream amplifier, filter, or ADC input. Eight sensor signals can be selected onto the common terminal, reducing the number of analog routing nets and simplifying board layout. The device’s low ON impedance helps preserve sensor signals, while very low OFF leakage reduces coupling from inactive channels. Because sensor outputs may have high source impedance or slow-settling behavior, the system designer should allow adequate acquisition time after changing the select inputs and account for the enable state during calibration.

🌐

Communications Signal Routing

The MC14051BD can route one of eight analog communication paths onto a shared processing or test chain. Its SP8T configuration is useful when a communications board must select between several conditioned inputs while keeping the downstream circuitry common. The 3 V to 18 V operating range supports both low-voltage mixed-signal logic and higher-voltage analog interfaces, provided the signal amplitude remains within the device’s specified limits. Keep routing traces compact, maintain a low-impedance supply reference, and verify crosstalk, insertion behavior, and switching transients against the datasheet characteristics.

🖥️

Programmable Test and Measurement Interface

The MC14051BD is appropriate for programmable test equipment that selects among multiple external or internal analog sources. A microcontroller or test controller can use the select inputs to address channels and the enable input to control whether the selected path is connected. The eight-channel topology supports repeatable source selection without duplicating the front-end amplifier chain. For high-precision measurements, include settling time in the test sequence, use low-noise references and grounding techniques, and review the device’s ON-resistance and leakage behavior at the intended signal levels.

🏭

Industrial Control Signal Multiplexing

In industrial control systems, the MC14051BD can consolidate several analog control or monitoring signals before they reach a controller or conversion stage. The device’s eight-channel selection reduces analog fanout and provides a clear digital address interface for embedded control logic. The broad 3 V to 18 V supply range can simplify integration across industrial voltage levels when the selected signal amplitudes and interface requirements are suitable. Designers should protect external inputs from overvoltage, use appropriate grounding and filtering around the common path, and verify operation across the intended environmental conditions.

🎧

Audio and Instrumentation Signal Selection

The MC14051BD can select among multiple low-frequency analog sources in instrumentation and audio-related signal paths. Its single-ended 8:1 arrangement is useful when the design needs to choose among several test points or conditioned channels without changing the downstream amplifier or converter. Low ON impedance helps maintain signal transfer, while the digital select and enable controls allow the routing to be coordinated with measurement or playback functions. Verify acceptable bandwidth, distortion, crosstalk, and settling behavior for the selected source impedance in the application.

What is the onsemi MC14051BD?
The onsemi MC14051BD is a digitally controlled analog multiplexer and demultiplexer that implements an SP8T solid-state switch. It uses three select inputs and an enable input to route one of eight analog channels to a common terminal. According to the onsemi MC14051B datasheet, the device provides low ON impedance, very low OFF leakage current, and analog signal control over the complete supply voltage range. The MC14051BD is supplied in a 16-pin SOIC package for surface-mount designs.
What is the supply voltage range of the MC14051BD?
The MC14051BD operates from 3 V to 18 V. This range allows the device to interface with both low-voltage digital control systems and higher-voltage analog signal environments. The onsemi MC14051B datasheet identifies the device as an analog multiplexer family with control of analog signals up to the complete supply voltage range. Designers should still check the absolute maximum ratings and operating conditions in the datasheet before applying the device to a new design.
How many channels can the MC14051BD select?
The MC14051BD provides an 8:1 analog switching arrangement, meaning eight analog terminals can be selected onto one common terminal. The onsemi MC14051B datasheet describes the device as an effective SP8T solid-state switch. Three digital select inputs define the active channel, while the enable input provides additional control of the switch state. This arrangement is useful for reducing the number of signal lines required in measurement and routing systems.
Where can I download the MC14051BD datasheet PDF?
The MC14051BD datasheet PDF is available from the onsemi product documentation at https://www.onsemi.com/pdf/datasheet/mc14051b-d.pdf. The retrieved datasheet listing identifies a 12-page document and describes the MC14051B, MC14052B, and MC14053B analog multiplexer family. Use the manufacturer PDF for the authoritative MC14051BD pin description, recommended operating conditions, switching characteristics, and application guidance.
Where can I find the MC14051BD pinout?
The MC14051BD pinout is shown in the manufacturer MC14051B datasheet, which can be downloaded from https://www.onsemi.com/pdf/datasheet/mc14051b-d.pdf. The device uses a 16-pin SOIC package and includes the eight analog terminals, three select inputs, enable input, common terminal, supply terminals, and a no-connect terminal. Use the pin-description table and package drawing in the datasheet when assigning PCB nets and verifying orientation.
What is the MC14051BD ON resistance?
The MC14051BD has an ON resistance listed as 280 ohm in the retrieved product listing. According to the onsemi MC14051B documentation, the multiplexer uses low ON impedance to help preserve analog signal integrity when a channel is selected. ON resistance can vary with supply voltage and signal conditions, so the final design should use the manufacturer’s test conditions and switching-characteristic tables for the exact operating point.
Is the MC14051BD suitable for analog signal routing?
Yes, the MC14051BD is designed for analog signal routing and demultiplexing. The onsemi MC14051B datasheet states that the device features low ON impedance and very low OFF leakage current, and that analog signals can be controlled over the complete supply voltage range. It is suitable for data acquisition, instrumentation, communications, and embedded analog interfaces where multiple sources must be routed through a common channel.
What is the difference between MC14051BD and MC14052BD?
The MC14051BD implements an SP8T analog multiplexer, while the MC14052BD implements a DP4T arrangement. The onsemi MC14051B datasheet groups these devices as related analog multiplexers, but they do not provide identical signal routing. MC14051BD selects one of eight channels onto one common path; MC14052BD provides a different switch topology. Because the pin functions and routing behavior differ, MC14052BD should not be treated as an automatic drop-in replacement without a complete schematic and pin-function review.
What is the best drop-in replacement for MC14051BD?
The MC14051BDR2, MC14051BDG, MC14051BFG, and MC14051BFL2 are the closest onsemi-family alternatives identified in the cross-reference results, and the listed comparison information indicates consistent terminals and packages for the MC14051BD variants. The cross-reference results do not establish a complete cross-brand equivalent set. Before replacing MC14051BD, verify the exact suffix, temperature grade, supply ratings, ON resistance, leakage, and the manufacturer’s pin description against the latest datasheet.
Can MC14051BD be replaced by MC14051BDR2?
MC14051BDR2 can be considered for a drop-in review because the cross-reference material identifies it as an MC14051B family part with the same 16-SOIC format. The suffix may represent a different ordering or packaging configuration, so the comparison must confirm that the pin functions and electrical ratings remain unchanged. The retrieved comparison result explicitly describes MC14051BDR2 as having consistent terminals and package characteristics with MC14051BD, but qualification for a specific design still requires checking the latest manufacturer datasheet.
When should I choose MC14051BD over another analog multiplexer?
Choose MC14051BD when the design needs one common analog path selected from eight source terminals and can operate from a 3 V to 18 V supply. Its SP8T topology, low ON impedance, very low OFF leakage, and 16-SOIC package make it appropriate for general analog routing. Consider another topology only when the system requires differential switching, multiple common paths, a different channel count, or electrical ratings outside those specified for the MC14051B family.
What can replace MC14051BD?
The directly related replacements identified for MC14051BD are MC14051BDR2, MC14051BDG, MC14051BFG, and MC14051BFL2, all associated with the onsemi MC14051B family and 16-SOIC format. These are the most practical drop-in-review candidates because the cross-reference comparison reports consistent terminal and package characteristics. The retrieved material does not name a verified cross-brand part with enough pin-level detail to recommend unconditionally.
Is MC14051BD the same as MC14051BDG?
MC14051BD and MC14051BDG are closely related onsemi MC14051B variants listed in the cross-reference results, and the comparison material reports consistent performance characteristics, terminals, and packages. The primary difference may be ordering, qualification, or packing information rather than the basic 8:1 analog-switch function. Verify the exact suffix-specific temperature grade, lifecycle status, and packing details in the current onsemi documentation before treating the parts as interchangeable.
What are the key specifications of MC14051BD that engineers should know?
The key MC14051BD specifications are its SP8T 8:1 analog multiplexing function, 3 V to 18 V supply range, 280 ohm listed ON resistance, very low OFF leakage, three select inputs, one enable input, and 16-SOIC surface-mount package. The onsemi MC14051B datasheet also states that analog signals can be controlled over the complete supply voltage range. These parameters define the routing, interface, and assembly requirements for a new design.
Where to buy MC14051BD online?
Use the Request a Quote form on this page to request current MC14051BD availability, packaging, and lead time. The retrieved product listings identify MC14051BD as an onsemi 16-SOIC analog multiplexer, but they do not provide a reliable quantity-break price table for this exact part. A quotation request allows the requested quantity, delivery requirements, and package preference to be confirmed without relying on stale pricing or third-party stock information.
What is the price of MC14051BD?
The current price of MC14051BD depends on quantity, packaging, and market conditions, and the retrieved listings do not provide a verified price-break table for the exact MPN. Use the Request a Quote form on this page to obtain a current quotation for the quantity and package you need. The product’s key engineering constraints are its 8:1 SP8T function, 3 V to 18 V supply range, and 16-SOIC package.
What is the lead time for MC14051BD?
The current lead time for MC14051BD is not established by the retrieved product pages, so it should be confirmed through the Request a Quote form on this page. When requesting a quotation, specify the required quantity, reel or bulk packaging, and destination or delivery schedule. The MC14051BD is identified as an onsemi 8:1 analog multiplexer in a 16-SOIC package, so commercial availability should be checked for the exact suffix and packing configuration.
Is MC14051BD in stock?
Stock for MC14051BD should be confirmed for the exact suffix and requested quantity using the Request a Quote form on this page. The retrieved listings show that MC14051BD is actively offered by distributors, but a distributor search result does not establish current inventory for a particular order quantity. Include your required delivery date and packaging preference in the request so availability can be matched to the actual production requirement.
Does MC14051BD meet automotive or RoHS requirements?
The retrieved snippets identify the MC14051BD as an onsemi 16-SOIC analog multiplexer, and one listing describes the MC14051BDG as automotive-related, but they do not provide a complete compliance table for the exact MC14051BD suffix. Treat RoHS, REACH, AEC-Q100, lead-free, and halogen-free status as requiring confirmation in the current manufacturer documentation. The D suffix should not be used by itself as a substitute for a formal compliance statement.

بيانات مرجعية هندسية لـ MC14051BD — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MC14051BD when the board needs a straightforward single-ended 8:1 analog multiplexer with three select inputs, an enable control, and a 3 V to 18 V supply range. It is a strong fit for data acquisition, sensor consolidation, test equipment, and industrial analog routing. Review MC14051BDR2, MC14051BDG, MC14051BFG, or MC14051BFL2 when you need another onsemi ordering or qualification option, but verify the suffix-specific temperature grade, packaging, lifecycle, and electrical limits before substitution. Do not select MC14052BD merely because it is in the same family: its DP4T topology does not provide the same pin-level routing function. For differential, higher-channel-count, or electrically dissimilar designs, choose a device whose topology and ratings explicitly match the application.

المقارنة مع البدائل

المعامل هذا المنتج MC14051BDR2 MC14051BDG MC14051BFG MC14051BFL2
Brand onsemi onsemi onsemi onsemi onsemi
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16
Switch Configuration SP8T SP8T SP8T SP8T SP8T
Number of Channels 8:1 8:1 8:1 8:1 8:1
Select Inputs 3 digital select inputs 3 digital select inputs 3 digital select inputs 3 digital select inputs 3 digital select inputs

أبرز الفروقات

  • Single-ended 8:1 analog routing (مقابلMC14052BD)
  • Common onsemi family with consistent 16-SOIC construction (مقابلMC14051BDR2)
  • Broad positive supply operating range (مقابلMC14051BFG)

ملاحظات التصميم

Route the common analog terminal and the selected channel paths as short, direct traces to minimize added resistance, capacitance, and susceptibility to injected noise. Keep the digital select and enable traces away from sensitive analog inputs, and place the device close to the source and destination circuitry. The 16-SOIC footprint should be checked against the manufacturer package drawing and the PCB land pattern before layout release.

Do not treat the enable and inhibit-related controls as interchangeable without reviewing the exact MC14051B pin description and truth table. Confirm the logic state used by the system controller, and avoid leaving an analog source connected when the intended measurement path is isolated. Also verify that the selected signal amplitude remains within the device’s supply-related operating limits.

Account for channel-to-channel switching transients and charge injection when the multiplexed signal is sampled immediately after a select change. Allow the measurement chain to settle before taking the sample, and compare the switching behavior with the datasheet’s recommended application conditions. In high-impedance sensor nodes, add suitable input biasing and guarding to reduce leakage-induced errors.

Decouple the VDD supply close to the device with the capacitance and placement recommended in the manufacturer documentation. Keep the supply return path continuous and separate high-current switching or digital return currents from the analog common path. The MC14051BD supports a 3 V to 18 V operating range, but the selected supply must also satisfy the signal amplitude, logic thresholds, and system timing requirements.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Yes
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The D suffix and retrieved product listings identify a lead-free SOIC variant, but the retrieved snippets do not provide a complete exact-MPN compliance matrix. Automotive-related wording appears for MC14051BDG in a comparison listing; verify the qualification status in current onsemi documentation.

تم التحقق من البيانات في: 2026-11-11 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MC14051BD datasheet MC14051BD datasheet pdf MC14051BD pinout MC14051BD equivalent MC14051BD replacement MC14051BD cross reference MC14051BD vs MC14052BD MC14051BD SOIC-16 footprint onsemi MC14051BD MC14051BD price MC14051BD stock MC14051BD application circuit

المكونات والمصطلحات ذات الصلة

onsemi MC14051BD MC14051B MC14051BDR2 MC14051BDG MC14051BFG MC14051BFL2 MC14052BD analog multiplexer analog demultiplexer SP8T solid-state switch 8:1 analog switch digital select input enable input ON resistance OFF leakage current 3 V to 18 V supply SOIC-16 surface-mount package analog signal routing data acquisition sensor multiplexing RoHS REACH AEC-Q100
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر