MC14051BD - 8:1 Analog Multiplexer, 16-SOIC | onsemi
MPN: MC14051BD ✓ פעילMC14051BD סקירה
An analog multiplexer is a semiconductor switch that connects one of several signal terminals to a common terminal according to digital address and enable inputs. The MC14051B family provides low ON impedance and very low OFF leakage, making it suitable for signal-routing applications in analog, industrial, communications, and embedded systems. Its control logic allows the selected analog channel to be changed without changing the source or destination circuitry.
The MC14051BD uses three digital select inputs to address one of eight common analog channels, while an enable input provides active control of the switch. The select inputs determine which channel is connected to the common terminal, and the enable input provides a controlled way to disconnect or isolate the selected path. This arrangement supports signal selection, test-point routing, sensor multiplexing, and general-purpose analog switching.
The MC14051B family is designed for positive supply operation from 3 V to 18 V. Its low ON impedance and very low OFF leakage help preserve signal integrity when switching between sources. Because the switch characteristics depend on supply voltage and signal amplitude, the application should be checked against the manufacturer datasheet for the complete electrical limits, temperature ranges, and dynamic behavior.
Typical uses include data-acquisition systems, analog measurement interfaces, communications equipment, instrumentation, and embedded control systems. The 16-SOIC package supports conventional surface-mount PCB assembly while providing separate common, input, select, enable, supply, and no-connect terminals. The device is appropriate when a design requires eight analog channels to be routed through one common path.
Designers should keep analog routing traces short, provide a stable supply reference, and account for injection charge and switching transients when the selected signal changes rapidly. The manufacturer datasheet is the authoritative reference for pin assignments, maximum ratings, recommended operating conditions, and application details.
חלופות תחליף ישיר עבור MC14051BD — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
MC14051BDR2
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MC14051BDG
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MC14051BFG
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MC14051BFL2
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MC14051BD מפרטים
| Product Type | Analog multiplexer / demultiplexer |
| Switch Configuration | SP8T solid-state switch |
| Number of Channels | 8:1 |
| Supply Voltage Range | 3 V to 18 V |
| ON Resistance | 280 ohm |
| מארז | 16-pin SOIC |
| מספר פינים | 16 |
| Select Inputs | 3 digital select inputs |
| Enable Input | 1 enable input |
| Analog Signal Range | Up to the complete supply voltage range |
| OFF Leakage Current | Very low; exact value not specified in the retrieved snippets |
| סוג הרכבה | Surface mount |
| Lead-Free Status | Lead-free D suffix |
| Datasheet Page Count | 12 pages |
תצורת פינים של MC14051BD
| פין 1 | Y0 — Analog input/output channel 0 |
| פין 2 | Y2 — Analog input/output channel 2 |
| פין 3 | Y4 — Analog input/output channel 4 |
| פין 4 | Y6 — Analog input/output channel 6 |
| פין 5 | Y7 — Analog input/output channel 7 |
| פין 6 | E — Enable input |
| פין 7 | VSS — Ground reference |
| פין 8 | INH — Inhibit or enable control input |
| פין 9 | A — Select input A |
| פין 10 | B — Select input B |
| פין 11 | C — Select input C |
| פין 12 | Y5 — Analog input/output channel 5 |
| פין 13 | Y3 — Analog input/output channel 3 |
| פין 14 | Y1 — Analog input/output channel 1 |
| פין 15 | VDD — Positive supply voltage |
| פין 16 | NC — Not connected (per datasheet) |
יישומים טיפוסיים
MC14051BD מתאים עבור 6 יישוםs: Data-Acquisition Analog Channel Selection, Sensor Signal Multiplexing, Communications Signal Routing, Programmable Test and Measurement Interface, Industrial Control Signal Multiplexing, Audio and Instrumentation Signal Selection.
Data-Acquisition Analog Channel Selection
The MC14051BD fits data-acquisition front ends that must bring multiple analog inputs onto a shared signal path for an ADC or measurement instrument. Its SP8T topology provides eight selectable sources, while the three select inputs and enable input allow the acquisition system to change channels under digital control. With a 3 V to 18 V supply range and low ON impedance, the device can operate across low-voltage control systems and higher-voltage analog signal environments. The common terminal should be routed close to the measurement electronics, and channel-switching timing, injection charge, and source impedance should be reviewed using the manufacturer switching-characteristic information.
מומלץ
Sensor Signal Multiplexing
Use the MC14051BD when several analog sensors share one downstream amplifier, filter, or ADC input. Eight sensor signals can be selected onto the common terminal, reducing the number of analog routing nets and simplifying board layout. The device’s low ON impedance helps preserve sensor signals, while very low OFF leakage reduces coupling from inactive channels. Because sensor outputs may have high source impedance or slow-settling behavior, the system designer should allow adequate acquisition time after changing the select inputs and account for the enable state during calibration.
מומלץ
Communications Signal Routing
The MC14051BD can route one of eight analog communication paths onto a shared processing or test chain. Its SP8T configuration is useful when a communications board must select between several conditioned inputs while keeping the downstream circuitry common. The 3 V to 18 V operating range supports both low-voltage mixed-signal logic and higher-voltage analog interfaces, provided the signal amplitude remains within the device’s specified limits. Keep routing traces compact, maintain a low-impedance supply reference, and verify crosstalk, insertion behavior, and switching transients against the datasheet characteristics.
מומלץ
Programmable Test and Measurement Interface
The MC14051BD is appropriate for programmable test equipment that selects among multiple external or internal analog sources. A microcontroller or test controller can use the select inputs to address channels and the enable input to control whether the selected path is connected. The eight-channel topology supports repeatable source selection without duplicating the front-end amplifier chain. For high-precision measurements, include settling time in the test sequence, use low-noise references and grounding techniques, and review the device’s ON-resistance and leakage behavior at the intended signal levels.
מומלץ
Industrial Control Signal Multiplexing
In industrial control systems, the MC14051BD can consolidate several analog control or monitoring signals before they reach a controller or conversion stage. The device’s eight-channel selection reduces analog fanout and provides a clear digital address interface for embedded control logic. The broad 3 V to 18 V supply range can simplify integration across industrial voltage levels when the selected signal amplitudes and interface requirements are suitable. Designers should protect external inputs from overvoltage, use appropriate grounding and filtering around the common path, and verify operation across the intended environmental conditions.
מומלץ
Audio and Instrumentation Signal Selection
The MC14051BD can select among multiple low-frequency analog sources in instrumentation and audio-related signal paths. Its single-ended 8:1 arrangement is useful when the design needs to choose among several test points or conditioned channels without changing the downstream amplifier or converter. Low ON impedance helps maintain signal transfer, while the digital select and enable controls allow the routing to be coordinated with measurement or playback functions. Verify acceptable bandwidth, distortion, crosstalk, and settling behavior for the selected source impedance in the application.
מומלץ
נתוני עזר הנדסיים עבור MC14051BD — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MC14051BDR2 | MC14051BDG | MC14051BFG | MC14051BFL2 |
|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi |
| Package | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 |
| Switch Configuration | SP8T | SP8T | SP8T | SP8T | SP8T |
| Number of Channels | 8:1 | 8:1 | 8:1 | 8:1 | 8:1 |
| Select Inputs | 3 digital select inputs | 3 digital select inputs | 3 digital select inputs | 3 digital select inputs | 3 digital select inputs |
מבדילים עיקריים
- Single-ended 8:1 analog routing (לעומתMC14052BD)
- Common onsemi family with consistent 16-SOIC construction (לעומתMC14051BDR2)
- Broad positive supply operating range (לעומתMC14051BFG)
הערות תכנון
Route the common analog terminal and the selected channel paths as short, direct traces to minimize added resistance, capacitance, and susceptibility to injected noise. Keep the digital select and enable traces away from sensitive analog inputs, and place the device close to the source and destination circuitry. The 16-SOIC footprint should be checked against the manufacturer package drawing and the PCB land pattern before layout release.
Do not treat the enable and inhibit-related controls as interchangeable without reviewing the exact MC14051B pin description and truth table. Confirm the logic state used by the system controller, and avoid leaving an analog source connected when the intended measurement path is isolated. Also verify that the selected signal amplitude remains within the device’s supply-related operating limits.
Account for channel-to-channel switching transients and charge injection when the multiplexed signal is sampled immediately after a select change. Allow the measurement chain to settle before taking the sample, and compare the switching behavior with the datasheet’s recommended application conditions. In high-impedance sensor nodes, add suitable input biasing and guarding to reduce leakage-induced errors.
Decouple the VDD supply close to the device with the capacitance and placement recommended in the manufacturer documentation. Keep the supply return path continuous and separate high-current switching or digital return currents from the analog common path. The MC14051BD supports a 3 V to 18 V operating range, but the selected supply must also satisfy the signal amplitude, logic thresholds, and system timing requirements.
מידע על תאימות
The D suffix and retrieved product listings identify a lead-free SOIC variant, but the retrieved snippets do not provide a complete exact-MPN compliance matrix. Automotive-related wording appears for MC14051BDG in a comparison listing; verify the qualification status in current onsemi documentation.