MC145484EG - 5V PCM Codec-Filter | Motorola Semiconductor Products
MPN: MC145484EG ✗ انتهى عمره الإنتاجيMC145484EG نظرة عامة
A PCM codec-filter is a specialized interface IC that converts analog voice signals into pulse-code-modulated digital streams and reconstructs analog signals from received PCM data. Within the power-management and signal-chain hierarchy, it belongs to the interface-IC class rather than to general-purpose processors or standalone analog converters. Its integrated filtering reduces the external circuitry needed for speech-band antialiasing and reconstruction smoothing.
Key device characteristics include selectable Mu-Law or A-Law companding, support for both synchronous and asynchronous operating arrangements, and operation from a 5V supply. The device performs codec filtering for each PCM channel and uses fixed-function control inputs to select its operating behavior. The EG order code corresponds to the 20-terminal gull-wing package listed for the MC145484 family, with an industrial temperature grade.
The MC145484EG integrates the digital conversion, band-limiting, and smoothing functions expected in a voice-channel codec. Companding selection allows the same hardware to support either Mu-Law or A-Law speech encoding conventions. This flexibility is useful in telephony, digital voice recording, and embedded communications equipment where the line-side signaling system determines the required companding law.
Typical applications include digital telephone interfaces, voice-channel equipment, communications terminals, and PCM test systems. In a transmit path, the MC145484EG digitizes and filters an analog voice input; in a receive path, it reconstructs and smooths PCM data into an analog output. Designers should account for the device's 5V supply requirement and confirm the master-clock relationship required by the selected synchronous or asynchronous system configuration.
For layout, keep analog voice inputs and reconstructed analog outputs away from digital clock and data traces, and follow the decoupling and grounding arrangement shown in the manufacturer datasheet. Confirm clock jitter, permitted bit rates, and companding configuration at the system level because these interface conditions determine intelligibility and signal quality even when the codec itself is operating correctly.
This page consolidates package details, sourcing guidance, replacement considerations, and practical interface design notes for engineers evaluating the MC145484EG as a single-channel 5V PCM codec-filter.
بدائل مباشرة لـ MC145484EG — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
MC145484E1G
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MC145484E2G
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MC145484E3G
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MC145484EG الحدود القصوى والخصائص الكهربائية
| Product Type | PCM Codec-Filter |
| جهد التغذية | 5 V |
| Channel Architecture | Per-channel codec-filter |
| Companding | Pin-selectable Mu-Law or A-Law |
| Supported Operating Modes | Synchronous and asynchronous |
| Functions | Voice digitization, reconstruction, band limiting, and smoothing |
| Target Application | PCM voice systems |
| Terminal Count | 20 terminals |
| العلبة | 20-pin SOG gull-wing small-outline package |
| Package Code | SOP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| نوع التركيب | Surface mount |
| Temperature Grade | Industrial |
| Family Package Options | 20-pin SOG, SSOP, and TSSOP |
دليل تكوين أطراف MC145484EG 20-pin sog, ssop, and tssop
تكوين الأطراف لـ MC145484EG (حزمة 20-pin sog, ssop, and tssop). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MC145484EG.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MC145484EG مناسب لـ 6 التطبيقs: Digital Telephone Voice Interface, PCM Voice Channel Terminal, Voice Communication Equipment, Digital Voice Recording, PCM Interface Test System, Industrial Voice Control Module.
Digital Telephone Voice Interface
The MC145484EG fits a digital telephone voice path because it combines analog voice digitization, digital PCM filtering, reconstruction, band limiting, and smoothing around a 5V supply. Pin-selectable Mu-Law or A-Law operation allows the same hardware to match either PCM speech convention. Place the codec in the analog channel section, use a clean 5V rail, and route the PCM data and clock traces away from the microphone and speaker inputs. The principal design constraint is clocking: whether the system is synchronous or asynchronous determines the external timing arrangement, so confirm the permitted bit rate and master-clock relationship before layout release.
موصى به
PCM Voice Channel Terminal
The MC145484EG is appropriate for a terminal that converts one analog voice channel into a PCM bit stream and reconstructs an analog channel from received PCM data. Its integrated band-limiting and smoothing functions reduce the need for separate external speech filters. The device operates from 5V and supports synchronous or asynchronous system timing, giving the designer flexibility in how terminal clocking is derived. Use the manufacturer pin-description table to assign the companding control, and validate recovered clock timing and data framing in hardware. Keep analog return paths short and provide the datasheet-recommended bypass capacitance close to the supply pins.
موصى به
Voice Communication Equipment
In voice communication equipment, the MC145484EG provides the per-channel conversion and filtering needed between an analog talk path and a PCM transport. The pin-selectable Mu-Law and A-Law companding functions support interoperability with different telephone-system conventions, while synchronous and asynchronous operation accommodates varied timing architectures. For an industrial design, confirm the suffix-specific temperature rating and the complete electrical limits from the MC145484 datasheet. Place the analog pins away from high-current switching nodes, provide a low-impedance ground reference, and test both transmit and reconstruct paths for clipping, idle-channel noise, and clock-sensitivity.
موصى به
Digital Voice Recording
The MC145484EG can serve as the speech-channel codec in digital recording systems that store or transmit PCM voice streams. Its per-channel digitizer and reconstruction functions establish the audio conversion path, while integrated band limiting and smoothing prepare the signal for PCM transmission. The 5V operating requirement simplifies integration into legacy voice-processing boards, and the selectable companding law provides flexibility across different system standards. Establish the required sample and bit timing before layout, because the codec-filter must align with the storage or transport format. Verify analog input level, reconstruction amplitude, and idle noise in the final board rather than relying only on simulation.
موصى به
PCM Interface Test System
The MC145484EG is suitable for PCM interface test equipment because it performs voice digitization, reconstruction, band limiting, and smoothing within a defined codec channel. Synchronous and asynchronous support allows the same device to be evaluated against multiple timing arrangements. Selectable Mu-Law or A-Law companding makes it possible to compare law conversion behavior across test channels. In an instrument design, isolate the analog test inputs from digital control circuitry, use a stable reference clock, and verify channel timing with the test system. The MC145484 datasheet application information should define the analog impedance and bypass arrangements needed for repeatable measurements.
موصى به
Industrial Voice Control Module
The MC145484EG can support industrial voice modules that convert a narrowband analog audio channel into a PCM data stream for processing or transmission. The integrated codec-filter reduces the external filter count, while pin-selectable companding allows the module to match its receiving system. Its industrial temperature grade makes it appropriate for many equipment environments, subject to confirmation of the exact suffix limits. Keep the codec close to the protected analog connector, separate microphone or speaker return currents from digital ground paths, and follow the recommended supply-bypass arrangement. Validate operation across temperature and supply tolerance because legacy fixed-function codecs have limited configuration flexibility.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MC145484EG — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MC145484E1G | MC145484E2G | MC145484E3G |
|---|---|---|---|---|
| Package | 20-pin SOG gull-wing small-outline package | 20-pin SOG gull-wing small-outline package | 20-pin SOG gull-wing small-outline package | 20-pin SOG gull-wing small-outline package |
| Brand | Motorola Semiconductor Products | Motorola Semiconductor Products | Motorola Semiconductor Products | Motorola Semiconductor Products |
| Product Type | PCM Codec-Filter | PCM Codec-Filter | PCM Codec-Filter | PCM Codec-Filter |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Companding | Pin-selectable Mu-Law or A-Law | Pin-selectable Mu-Law or A-Law | Pin-selectable Mu-Law or A-Law | Pin-selectable Mu-Law or A-Law |
| Operating Modes | Synchronous and asynchronous | Synchronous and asynchronous | Synchronous and asynchronous | Synchronous and asynchronous |
| Terminal Count | 20 | 20 | 20 | 20 |
أبرز الفروقات
- Complete per-channel codec-filter integration (مقابلMC145484E1G)
- Selectable speech companding (مقابلMC145484E2G)
- Legacy PCB compatibility (مقابلMC145484E3G)
ملاحظات التصميم
Separate the analog voice path from PCM data and clock routing. Place the codec-filter close to the analog connector, route clock and data lines away from microphone and speaker inputs, and keep analog return currents from sharing digital return paths. Use the MC145484 datasheet application diagram to determine component placement around the analog pins and maintain a continuous ground reference under the device.
Provide a stable 5V rail and place the recommended bypass capacitors close to the supply pins. Keep the supply return path low impedance and separate from analog input and output returns where the application allows it. Verify startup, idle-channel output noise, and reconstructed signal stability across the operating supply range and temperature condition used by the finished equipment.
Confirm clock timing, PCM framing, and the selected Mu-Law or A-Law companding setting before hardware release. Synchronous and asynchronous operation are both supported, but the external timing architecture determines how the channel clock is generated or recovered. Check jitter margin, permitted bit rate, and data setup timing in the system design, then verify idle noise and analog clipping after layout.
Do not substitute a codec solely because it supports the same companding laws. Confirm package drawing, pin names, clock interface, supply voltage, timing limits, and temperature grade against the MC145484 datasheet. The EG code identifies a 20-terminal industrial SOP configuration, so a different suffix or package drawing must be approved through a complete pin-by-pin comparison.
معلومات الامتثال
The MC145484 is a legacy Motorola codec-filter, and no specific RoHS, REACH, halogen-free, or conflict-minerals statement was confirmed. AEC-Q100 is not applicable because the product is not an automotive-qualified device.