Motorola

MC145484EG - 5V PCM Codec-Filter | Motorola Semiconductor Products

料号: MC145484EG ✗ 停产
5 V Vdss 20-pin SOG gull-wing small-outline package Package
最小起订量: 1 |

MC145484EG 概述

The Motorola Semiconductor Products MC145484EG is a 5V PCM codec-filter that performs per-channel voice digitization, reconstruction, band limiting, and smoothing in PCM systems. It supports pin-selectable Mu-Law or A-Law companding and is packaged in a 20-pin small-outline gull-wing package. The MC145484EG is intended for synchronous and asynchronous PCM applications where the channel bit rate is established by an external clock or by the associated system timing.

A PCM codec-filter is a specialized interface IC that converts analog voice signals into pulse-code-modulated digital streams and reconstructs analog signals from received PCM data. Within the power-management and signal-chain hierarchy, it belongs to the interface-IC class rather than to general-purpose processors or standalone analog converters. Its integrated filtering reduces the external circuitry needed for speech-band antialiasing and reconstruction smoothing.

Key device characteristics include selectable Mu-Law or A-Law companding, support for both synchronous and asynchronous operating arrangements, and operation from a 5V supply. The device performs codec filtering for each PCM channel and uses fixed-function control inputs to select its operating behavior. The EG order code corresponds to the 20-terminal gull-wing package listed for the MC145484 family, with an industrial temperature grade.

The MC145484EG integrates the digital conversion, band-limiting, and smoothing functions expected in a voice-channel codec. Companding selection allows the same hardware to support either Mu-Law or A-Law speech encoding conventions. This flexibility is useful in telephony, digital voice recording, and embedded communications equipment where the line-side signaling system determines the required companding law.

Typical applications include digital telephone interfaces, voice-channel equipment, communications terminals, and PCM test systems. In a transmit path, the MC145484EG digitizes and filters an analog voice input; in a receive path, it reconstructs and smooths PCM data into an analog output. Designers should account for the device's 5V supply requirement and confirm the master-clock relationship required by the selected synchronous or asynchronous system configuration.

For layout, keep analog voice inputs and reconstructed analog outputs away from digital clock and data traces, and follow the decoupling and grounding arrangement shown in the manufacturer datasheet. Confirm clock jitter, permitted bit rates, and companding configuration at the system level because these interface conditions determine intelligibility and signal quality even when the codec itself is operating correctly.

This page consolidates package details, sourcing guidance, replacement considerations, and practical interface design notes for engineers evaluating the MC145484EG as a single-channel 5V PCM codec-filter.

直接替换替代料: MC145484EG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

MC145484E1G

✅ 直接替换 ⚠️ 规格未核验
📦 20-pin SOG gull-wing small-outline package
Same-family order code with a 0% change in codec, voltage, and companding ratings; confirm temperature grade and timing limits against the MC145484EG before release

📋 参考替代料(不在目录中)

MC145484E2G

✅ 直接替换 ⚠️ 规格未核验
📦 20-pin SOG gull-wing small-outline package
Same-family order code with a 0% change in codec, voltage, and companding ratings; verify the suffix-specific temperature and packing details before substitution

📋 参考替代料(不在目录中)

MC145484E3G

✅ 直接替换 ⚠️ 规格未核验
📦 20-pin SOG gull-wing small-outline package
Same-family order code with a 0% change in codec, voltage, and companding ratings; confirm suffix-specific grade and production configuration before substitution

📋 参考替代料(不在目录中)

MC145484EG 最大额定值与电气特性

Product Type PCM Codec-Filter
电源电压 5 V
Channel Architecture Per-channel codec-filter
Companding Pin-selectable Mu-Law or A-Law
Supported Operating Modes Synchronous and asynchronous
Functions Voice digitization, reconstruction, band limiting, and smoothing
Target Application PCM voice systems
Terminal Count 20 terminals
封装 20-pin SOG gull-wing small-outline package
Package Code SOP
Package Shape Rectangular
Terminal Form Gull wing
安装类型 Surface mount
Temperature Grade Industrial
Family Package Options 20-pin SOG, SSOP, and TSSOP

MC145484EG 20-pin sog, ssop, and tssop 引脚配置指南

MC145484EG(20-pin sog, ssop, and tssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MC145484EG 的 20-pin sog, ssop, and tssop 封装引脚图

暂无详细引脚数据: MC145484EG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MC145484EG 适用于 6 应用s: Digital Telephone Voice Interface, PCM Voice Channel Terminal, Voice Communication Equipment, Digital Voice Recording, PCM Interface Test System, Industrial Voice Control Module.

📱

Digital Telephone Voice Interface

The MC145484EG fits a digital telephone voice path because it combines analog voice digitization, digital PCM filtering, reconstruction, band limiting, and smoothing around a 5V supply. Pin-selectable Mu-Law or A-Law operation allows the same hardware to match either PCM speech convention. Place the codec in the analog channel section, use a clean 5V rail, and route the PCM data and clock traces away from the microphone and speaker inputs. The principal design constraint is clocking: whether the system is synchronous or asynchronous determines the external timing arrangement, so confirm the permitted bit rate and master-clock relationship before layout release.

🖥️

PCM Voice Channel Terminal

The MC145484EG is appropriate for a terminal that converts one analog voice channel into a PCM bit stream and reconstructs an analog channel from received PCM data. Its integrated band-limiting and smoothing functions reduce the need for separate external speech filters. The device operates from 5V and supports synchronous or asynchronous system timing, giving the designer flexibility in how terminal clocking is derived. Use the manufacturer pin-description table to assign the companding control, and validate recovered clock timing and data framing in hardware. Keep analog return paths short and provide the datasheet-recommended bypass capacitance close to the supply pins.

🌐

Voice Communication Equipment

In voice communication equipment, the MC145484EG provides the per-channel conversion and filtering needed between an analog talk path and a PCM transport. The pin-selectable Mu-Law and A-Law companding functions support interoperability with different telephone-system conventions, while synchronous and asynchronous operation accommodates varied timing architectures. For an industrial design, confirm the suffix-specific temperature rating and the complete electrical limits from the MC145484 datasheet. Place the analog pins away from high-current switching nodes, provide a low-impedance ground reference, and test both transmit and reconstruct paths for clipping, idle-channel noise, and clock-sensitivity.

🎧

Digital Voice Recording

The MC145484EG can serve as the speech-channel codec in digital recording systems that store or transmit PCM voice streams. Its per-channel digitizer and reconstruction functions establish the audio conversion path, while integrated band limiting and smoothing prepare the signal for PCM transmission. The 5V operating requirement simplifies integration into legacy voice-processing boards, and the selectable companding law provides flexibility across different system standards. Establish the required sample and bit timing before layout, because the codec-filter must align with the storage or transport format. Verify analog input level, reconstruction amplitude, and idle noise in the final board rather than relying only on simulation.

🔧

PCM Interface Test System

The MC145484EG is suitable for PCM interface test equipment because it performs voice digitization, reconstruction, band limiting, and smoothing within a defined codec channel. Synchronous and asynchronous support allows the same device to be evaluated against multiple timing arrangements. Selectable Mu-Law or A-Law companding makes it possible to compare law conversion behavior across test channels. In an instrument design, isolate the analog test inputs from digital control circuitry, use a stable reference clock, and verify channel timing with the test system. The MC145484 datasheet application information should define the analog impedance and bypass arrangements needed for repeatable measurements.

🏭

Industrial Voice Control Module

The MC145484EG can support industrial voice modules that convert a narrowband analog audio channel into a PCM data stream for processing or transmission. The integrated codec-filter reduces the external filter count, while pin-selectable companding allows the module to match its receiving system. Its industrial temperature grade makes it appropriate for many equipment environments, subject to confirmation of the exact suffix limits. Keep the codec close to the protected analog connector, separate microphone or speaker return currents from digital ground paths, and follow the recommended supply-bypass arrangement. Validate operation across temperature and supply tolerance because legacy fixed-function codecs have limited configuration flexibility.

What is the MC145484EG used for?
The MC145484EG is a 5V single-channel PCM codec-filter for digitizing and reconstructing analog voice signals. According to the MC145484 manufacturer datasheet, it performs voice digitization, PCM reconstruction, band limiting, and smoothing, and it supports pin-selectable Mu-Law or A-Law companding. The device is intended for synchronous and asynchronous PCM systems, including telephone interfaces, voice terminals, and communications equipment.
What is the MC145484EG package and pin count?
The MC145484EG uses a 20-pin small-outline gull-wing package. The manufacturer datasheet identifies 20-pin SOG, SSOP, and TSSOP options across the MC145484 family, while distributor product records describe the EG version as a rectangular SOP package with 20 terminals and gull-wing leads. Verify the exact land pattern and pin assignment in the MC145484 datasheet before laying out or replacing a circuit board.
Where can I download the MC145484EG datasheet PDF?
The MC145484 datasheet is available as a PDF through the MC145484 document hosted by Mouser and through the archived Motorola datasheet listing. The manufacturer document describes a 5V PCM codec-filter with pin-selectable Mu-Law or A-Law companding, operation in synchronous or asynchronous systems, and 20-pin SOG, SSOP, and TSSOP package options. Use the pin-description and application sections to verify board connections.
Does the MC145484EG support both Mu-Law and A-Law companding?
Yes, the MC145484EG supports pin-selectable Mu-Law or A-Law companding. The manufacturer datasheet identifies the companding mode as a pin-selectable function, allowing the same codec-filter to be configured for either common PCM speech law. Select the correct companding mode to match the transmitting and receiving equipment, because a mismatch can distort amplitude interpretation and degrade intelligibility.
Can the MC145484EG operate in asynchronous PCM systems?
The MC145484EG can operate in both synchronous and asynchronous applications, according to the manufacturer datasheet. In a synchronous arrangement, an external clock establishes the PCM channel timing; in an asynchronous arrangement, timing is recovered or arranged to match the incoming stream. Confirm the required master-clock relationship, permitted bit rate, and synchronization method in the system timing design.
What is the supply voltage of the MC145484EG?
The MC145484EG operates from a 5V supply. The manufacturer datasheet identifies the MC145484 as a 5V PCM codec-filter. Because the device combines analog input and output stages with digital PCM logic, the supply rail should be kept within the device's specified operating range and adequately decoupled according to the application information in the MC145484 datasheet.
What is the best drop-in replacement for the MC145484EG?
The closest drop-in choices are same-family MC145484 order codes that retain the same 20-pin SOG footprint and codec behavior, but no substitute should be treated as confirmed without a pin-by-pin datasheet review. The MC145484E1G, MC145484E2G, and MC145484E3G variants share the family architecture, while the EG order code identifies the original industrial SOP configuration. Confirm temperature grade, timing, and pinout before approving a replacement.
Can MC145484E1G replace an MC145484EG without PCB changes?
An MC145484E1G is the closest same-family option for an MC145484EG because both belong to the MC145484 codec-filter family and use the 20-pin SOP order-code structure. Compatibility still depends on matching package drawing, pin assignment, temperature grade, timing limits, and companding configuration. Perform a complete pin comparison and confirm the required clocking behavior with the manufacturer datasheet before treating the swap as drop-in.
MC145484EG vs MC145484E1G - which one should I select?
Choose the MC145484EG when you specifically need the original industrial 20-pin SOP configuration identified by the EG order code. Choose the MC145484E1G when it is the approved ordering configuration for a new design and its package, temperature, and timing details match the application. Both are members of the same codec-filter family, so their functional ratings are close, but the order-code suffix determines the exact procurement configuration.
What can replace the MC145484EG in a voice codec design?
The practical replacement path starts with the MC145484E1G, MC145484E2G, and MC145484E3G order codes because they remain in the same codec-filter family and preserve the 20-pin order-code structure. A mixed-signal codec with different power rails, clock architecture, or signal levels may require a PCB redesign rather than a pin-compatible substitution. Verify every connection and timing parameter before selecting a replacement.
Is the MC145484EG suitable for digital telephone equipment?
The MC145484EG is suitable for digital telephone and voice-channel equipment because it combines voice digitization, reconstruction, band limiting, and smoothing in one 5V codec-filter. Pin-selectable Mu-Law or A-Law companding supports the two widely used PCM speech laws. Its suitability depends on matching the required channel bit rate, clocking method, companding law, and analog interface impedance to the telephone design.
Where can I buy the MC145484EG?
Use the Request a Quote form on this page to request current MC145484EG availability, unit pricing, and lead time. The part is a legacy codec-filter and market availability can vary by lot, package configuration, and regional inventory. Provide the exact MPN, target quantity, and required delivery date when submitting the request so sourcing can return a traceable quotation.
What is the lead time for the MC145484EG?
Request the current MC145484EG lead time through the Request a Quote form on this page. Lead time for this legacy device depends on available inventory and the sourcing channel, so it should not be assumed from general distributor stock indicators. Include your required quantity, shipment destination, and target assembly date to obtain a schedule matched to your build plan.
Is the MC145484EG currently in stock?
Stock status for the MC145484EG changes with the sourcing channel and remaining legacy inventory. Use the Request a Quote form on this page to request the latest availability for the exact 20-pin SOP order code. Provide your annual and per-order quantities as well as any required date code information so the sourcing response reflects practical supply rather than a general listing status.
What are the key specifications of the MC145484EG?
The key MC145484EG specifications are a 5V supply, per-channel PCM codec-filter operation, pin-selectable Mu-Law or A-Law companding, and support for synchronous or asynchronous operation. The device performs digitization, reconstruction, band limiting, and smoothing in one package. It is offered in a 20-terminal gull-wing SOP configuration with an industrial temperature grade, making it suitable for legacy voice-processing systems.

工程参考数据: MC145484EG ——对比、设计指导和合规信息。

选型指南

Select the MC145484EG for maintenance of an existing 5V PCM voice system that uses the 20-terminal SOG footprint and pin-selectable Mu-Law or A-Law companding. Its integrated digitization, reconstruction, band limiting, and smoothing reduce external filtering requirements. For a new legacy-compatible design, the MC145484E1G, MC145484E2G, and MC145484E3G are same-family ordering candidates, but each suffix must be checked for package drawing, temperature grade, and production configuration. Prefer a modern mixed-signal codec when the design is not constrained to an existing board and needs lower voltage, smaller size, or adjustable clocking. Never select a replacement solely by matching the PCM function; verify pin assignments, timing limits, analog impedance, and operating temperature against the MC145484 datasheet.

与替代料对比

参数 本产品 MC145484E1G MC145484E2G MC145484E3G
Package 20-pin SOG gull-wing small-outline package 20-pin SOG gull-wing small-outline package 20-pin SOG gull-wing small-outline package 20-pin SOG gull-wing small-outline package
Brand Motorola Semiconductor Products Motorola Semiconductor Products Motorola Semiconductor Products Motorola Semiconductor Products
Product Type PCM Codec-Filter PCM Codec-Filter PCM Codec-Filter PCM Codec-Filter
Supply Voltage 5 V 5 V 5 V 5 V
Companding Pin-selectable Mu-Law or A-Law Pin-selectable Mu-Law or A-Law Pin-selectable Mu-Law or A-Law Pin-selectable Mu-Law or A-Law
Operating Modes Synchronous and asynchronous Synchronous and asynchronous Synchronous and asynchronous Synchronous and asynchronous
Terminal Count 20 20 20 20

关键差异点

  • Complete per-channel codec-filter integration (对比 MC145484E1G)
  • Selectable speech companding (对比 MC145484E2G)
  • Legacy PCB compatibility (对比 MC145484E3G)

设计说明

Separate the analog voice path from PCM data and clock routing. Place the codec-filter close to the analog connector, route clock and data lines away from microphone and speaker inputs, and keep analog return currents from sharing digital return paths. Use the MC145484 datasheet application diagram to determine component placement around the analog pins and maintain a continuous ground reference under the device.

Provide a stable 5V rail and place the recommended bypass capacitors close to the supply pins. Keep the supply return path low impedance and separate from analog input and output returns where the application allows it. Verify startup, idle-channel output noise, and reconstructed signal stability across the operating supply range and temperature condition used by the finished equipment.

Confirm clock timing, PCM framing, and the selected Mu-Law or A-Law companding setting before hardware release. Synchronous and asynchronous operation are both supported, but the external timing architecture determines how the channel clock is generated or recovered. Check jitter margin, permitted bit rate, and data setup timing in the system design, then verify idle noise and analog clipping after layout.

Do not substitute a codec solely because it supports the same companding laws. Confirm package drawing, pin names, clock interface, supply voltage, timing limits, and temperature grade against the MC145484 datasheet. The EG code identifies a 20-terminal industrial SOP configuration, so a different suffix or package drawing must be approved through a complete pin-by-pin comparison.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The MC145484 is a legacy Motorola codec-filter, and no specific RoHS, REACH, halogen-free, or conflict-minerals statement was confirmed. AEC-Q100 is not applicable because the product is not an automotive-qualified device.

相关搜索

MC145484EG datasheet MC145484EG datasheet pdf MC145484EG pinout MC145484EG equivalent MC145484EG replacement MC145484EG drop-in substitute MC145484EG PCM codec filter MC145484EG 20 pin SOP Motorola MC145484EG MC145484EG Mu-Law A-Law MC145484EG synchronous asynchronous MC145484EG voice interface MC145484EG price MC145484EG stock MC145484E1G vs MC145484EG

相关元器件 & 术语

Motorola Semiconductor Products MC145484EG MC145484E1G MC145484E2G MC145484E3G PCM codec-filter codec-filter voice codec interface IC semiconductor Pulse-code modulation PCM Mu-Law companding A-Law companding voice digitization signal reconstruction band limiting smoothing filter synchronous PCM asynchronous PCM 20-pin SOG gull-wing surface-mount package industrial temperature grade 5V power supply
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情