MC1458DR2 - Dual Internally Compensated Operational Amplifier | onsemi
MPN: MC1458DR2 ✗ انتهى عمره الإنتاجيMC1458DR2 نظرة عامة
The MC1458 family combines a high-performance dual amplifier with internal frequency compensation. Internal compensation removes the need for an external dominant-pole capacitor in many standard feedback configurations, while external feedback resistors still determine gain, bandwidth, input impedance, and signal behavior. This makes the MC1458DR2 practical for designs that require a straightforward dual-amplifier solution rather than a highly integrated modern rail-to-rail amplifier.
Key operating characteristics include low input offset voltage, low input bias current, broad common-mode input range, and a dual-amplifier configuration in a compact surface-mount package. The internal compensation is designed for stable operation with resistive feedback networks, allowing the device to be used in non-inverting, inverting, voltage-follower, summing, and active-filter circuits. The two amplifiers share a common power supply and ground connection while maintaining separate differential inputs and outputs.
Typical uses include small-signal audio channels, sensor-conditioning stages, analog summing networks, waveform shaping, integrators, and low-frequency control loops. The 8-pin SOIC footprint is also convenient for designs that previously used 8-pin dual operational amplifiers. Because this is an older bipolar amplifier family, engineers should verify the exact supply voltage, common-mode range, output swing, slew rate, and input/output current limits against the manufacturer datasheet before finalizing a new design.
For PCB design, place the device close to the feedback network and bypass pins, route high-impedance input and compensation-related nodes with short traces, and maintain a quiet ground reference. Decoupling capacitors should be positioned close to the supply pins, while analog input traces should be separated from switching and digital return paths. The dual architecture allows two related signal paths to be implemented with one package, reducing component count and simplifying board layout.
This product page combines the manufacturer and distributor references, package information, technical use cases, comparison fields, and practical design guidance for engineers evaluating the MC1458DR2 as a dual operational-amplifier choice.
بدائل مباشرة لـ MC1458DR2 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MC1458DR2 (نفس عامل الشكل والبصمة) — يختلف في Package.
MC1458DR
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←MC1458CD
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MC1458DR
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←LM1458M
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
LM1458MX/NOPB
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MC1458DR2 الحدود القصوى والخصائص الكهربائية
| Product Type | Dual operational amplifier |
| Number of Amplifier Circuits | 2 circuits |
| Compensation Type | Internally compensated |
| Architecture | Bipolar operational amplifier |
| Maximum Offset Voltage | 7.5 mV |
| العلبة | 8-pin SOIC, 0.154 inch width, 3.90 mm width |
| نوع التركيب | Surface mount |
| مستوى MSL | 3, 168 hours |
| REACH Status | REACH affected |
دليل تكوين أطراف MC1458DR2 8-pin soic, 0.154 inch width, 3.90 mm width
تكوين الأطراف لـ MC1458DR2 (حزمة 8-pin soic, 0.154 inch width, 3.90 mm width). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MC1458DR2.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MC1458DR2 مناسب لـ 6 التطبيقs: Audio Signal Conditioning, Sensor Signal Conditioning, Active Filtering, Summing and Mixing Amplifier, Waveform Shaping and Integration, Industrial Control and Instrumentation.
Audio Signal Conditioning
The MC1458DR2 is suitable for small-signal audio conditioning because it provides two internally compensated amplifier sections for gain, filtering, or buffering functions. Each section can use external feedback components to establish the required closed-loop behavior. The bipolar design is appropriate for conventional audio signal paths where the supply and signal levels remain within the amplifier's specified common-mode and output-swing limits. Confirm bandwidth, slew rate, distortion, and output-drive requirements in the datasheet before using the device near rail limits.
موصى به
Sensor Signal Conditioning
A dual amplifier can support two related sensor-front-end channels, such as amplification and filtering or differential signal conversion. The MC1458DR2's two independent amplifier sections reduce package count while keeping feedback networks close to their corresponding inputs. Input bias current and offset characteristics are important when the source impedance is high, while common-mode range and output swing determine whether the sensor signal can be conditioned without clipping. Validate those parameters for the sensor's excitation and output range.
موصى به
Active Filtering
The MC1458DR2 can implement first- and higher-order active filter sections using external resistors and capacitors around its internally compensated amplifier stages. Its dual format allows two filter poles or two related signal paths to be implemented in one SOIC package. Select resistor and capacitor values using the datasheet's recommended feedback arrangement, and check the gain-bandwidth product and slew rate so that the filter remains stable across the intended frequency range and output amplitude.
موصى به
Summing and Mixing Amplifier
The MC1458DR2 is explicitly suited to summing-amplifier and mixing circuits because its internally compensated dual amplifiers accept external feedback components. One section can combine several input signals through summing resistors, while the second section can provide inversion, gain adjustment, or a second channel. The summing node must remain within the input common-mode range, and the summed waveform must remain inside the output swing. Use precise resistor tolerances when amplitude accuracy matters.
موصى به
Waveform Shaping and Integration
The dual amplifier sections can be assigned to integrator, differentiator, or waveform-shaping functions when the feedback network is designed around the device's datasheet limits. Internal compensation makes the basic feedback topology straightforward, although capacitor tolerances and amplifier input bias current can affect accuracy. Keep the integration output away from the supply rails and account for finite gain-bandwidth product, slew rate, and output-current capability during startup and transient conditions.
موصى به
Industrial Control and Instrumentation
In industrial instrumentation, the MC1458DR2 can provide low-frequency amplification, error amplification, and signal conditioning around sensors or control comparators. The dual architecture is useful for closed-loop control blocks that require more than one amplifier but do not need a rail-to-rail precision device. Verify the operating temperature range, supply tolerance, output swing, and noise performance against the industrial environment, and use a stable reference ground to reduce measurement error.
موصى به
بيانات مرجعية هندسية لـ MC1458DR2 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Brand | onsemi |
| Package | 8-pin SOIC |
| Amplifier Circuits | 2 |
| Compensation | Internally compensated |
| Architecture | Bipolar |
| Maximum Offset Voltage | 7.5 mV |
| MSL Level | 3, 168 hours |
| Mounting Type | Surface mount |
| REACH Status | REACH affected |
أبرز الفروقات
- Dual amplifier in one 8-pin package (مقابلMC3403DR)
- Established internally compensated bipolar architecture (مقابلLM1458M)
- Documented maximum offset-voltage classification (مقابلLM1458M)
ملاحظات التصميم
Place the MC1458DR2 close to its feedback resistors and input components. Keep the two differential input routes short, avoid running them beneath switching nodes, and route them away from high-current return paths. The SOIC footprint requires careful thermal-pad-free layout around the eight leads; follow the manufacturer's land pattern and maintain adequate copper around the device for temperature consistency between the two amplifier sections.
Use the manufacturer's recommended supply-bypass arrangement at the device power and ground pins. The capacitor should be placed directly at the pins so that the high-frequency current loop is minimized. Select the bypass capacitance from the datasheet's recommended application circuit rather than relying on a generic value, and confirm that the chosen supply remains within the operating limits across temperature and load transients.
Keep the summing node, integrator capacitor, and feedback-resistor junctions compact because parasitic capacitance and leakage can change the intended transfer function. For high-impedance sources, use guarding and a clean analog ground to reduce leakage and noise pickup. Do not assume rail-to-rail operation; verify the input common-mode range and output swing so that sensor and audio waveforms do not clip or distort near the supply limits.
Estimate total dissipation for both amplifier sections simultaneously, including quiescent current and load-current effects. The exact operating temperature rating and thermal resistance must be taken from the manufacturer datasheet. Provide continuous copper around the SOIC where board area permits, avoid placing the device next to a heat source, and verify that the calculated junction temperature remains below the device limit at the highest expected ambient temperature.
معلومات الامتثال
The GlobalSpec product reference states MSL Level 3 (168 Hours) and REACH Affected. The other compliance fields are not established by the referenced product information.