onsemi

MC1458DR2 - Dual Internally Compensated Operational Amplifier | onsemi

MPN: MC1458DR2 ✗ اختتامِ زندگی
7.5 mV Vdss 8-pin SOIC, 0.154 inch width, 3.90 mm width Package
MOQ: 1 |

MC1458DR2 جائزہ

The onsemi MC1458DR2 is a dual, internally compensated operational amplifier designed for general-purpose analog signal processing. It provides two amplifier circuits in an 8-pin SOIC package and is specified for operation from a single positive supply, making it suitable for audio, instrumentation, control, and active-filter applications. The device uses bipolar construction and is optimized for applications using external feedback components, including summing amplifiers, integrators, and conventional closed-loop amplifier stages.

The MC1458 family combines a high-performance dual amplifier with internal frequency compensation. Internal compensation removes the need for an external dominant-pole capacitor in many standard feedback configurations, while external feedback resistors still determine gain, bandwidth, input impedance, and signal behavior. This makes the MC1458DR2 practical for designs that require a straightforward dual-amplifier solution rather than a highly integrated modern rail-to-rail amplifier.

Key operating characteristics include low input offset voltage, low input bias current, broad common-mode input range, and a dual-amplifier configuration in a compact surface-mount package. The internal compensation is designed for stable operation with resistive feedback networks, allowing the device to be used in non-inverting, inverting, voltage-follower, summing, and active-filter circuits. The two amplifiers share a common power supply and ground connection while maintaining separate differential inputs and outputs.

Typical uses include small-signal audio channels, sensor-conditioning stages, analog summing networks, waveform shaping, integrators, and low-frequency control loops. The 8-pin SOIC footprint is also convenient for designs that previously used 8-pin dual operational amplifiers. Because this is an older bipolar amplifier family, engineers should verify the exact supply voltage, common-mode range, output swing, slew rate, and input/output current limits against the manufacturer datasheet before finalizing a new design.

For PCB design, place the device close to the feedback network and bypass pins, route high-impedance input and compensation-related nodes with short traces, and maintain a quiet ground reference. Decoupling capacitors should be positioned close to the supply pins, while analog input traces should be separated from switching and digital return paths. The dual architecture allows two related signal paths to be implemented with one package, reducing component count and simplifying board layout.

This product page combines the manufacturer and distributor references, package information, technical use cases, comparison fields, and practical design guidance for engineers evaluating the MC1458DR2 as a dual operational-amplifier choice.

کے لیے ڈراپ اِن متبادل MC1458DR2 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں MC1458DR2 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.

Texas Instruments
Package: 8-SOIC (D)
موازنہ کریں MC1458DR2 →

MC1458DR

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Texas Instruments
📦 8-pin SOIC
Texas Instruments · MC1458 · General Purpose, Dual Channel · 2 · 0.5 V/us (typical) · 1 MHz · 1 mV (typical at 25 C) · 30 nA (typical)

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

MC1458CD

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-pin SOIC
Same MC1458 family's 30 V maximum supply and 1 MHz gain-bandwidth positioning; device-grade and ordering suffix differs

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MC1458DR

✅ ڈراپ-اِن
Texas Instruments
📦 8-pin SOIC
Texas Instruments · MC1458 · General Purpose, Dual Channel · 2 · 0.5 V/us (typical) · 1 MHz · 1 mV (typical at 25 C) · 30 nA (typical)

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM1458M

✅ ڈراپ-اِن
📦 8-pin SOIC
Published comparison identifies a similar dual amplifier; some electrical characteristics differ while the SOP-8 format remains comparable

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

LM1458MX/NOPB

✅ ڈراپ-اِن
📦 8-pin SOIC
Published comparison identifies a similar dual amplifier; qualification and detailed electrical characteristics differ from MC1458DR2

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MC1458DR2 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Dual operational amplifier
Number of Amplifier Circuits 2 circuits
Compensation Type Internally compensated
Architecture Bipolar operational amplifier
Maximum Offset Voltage 7.5 mV
پیکیج 8-pin SOIC, 0.154 inch width, 3.90 mm width
ماؤنٹنگ ٹائپ Surface mount
MSL لیول 3, 168 hours
REACH Status REACH affected

MC1458DR2 8-pin soic, 0.154 inch width, 3.90 mm width پن کنفیگریشن گائیڈ

MC1458DR2 (8-pin soic, 0.154 inch width, 3.90 mm width پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

MC1458DR2 کے لیے 8-pin soic, 0.154 inch width, 3.90 mm width پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MC1458DR2.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MC1458DR2 کے لیے موزوں ہے 6 ایپلیکیشنs: Audio Signal Conditioning, Sensor Signal Conditioning, Active Filtering, Summing and Mixing Amplifier, Waveform Shaping and Integration, Industrial Control and Instrumentation.

🎧

Audio Signal Conditioning

The MC1458DR2 is suitable for small-signal audio conditioning because it provides two internally compensated amplifier sections for gain, filtering, or buffering functions. Each section can use external feedback components to establish the required closed-loop behavior. The bipolar design is appropriate for conventional audio signal paths where the supply and signal levels remain within the amplifier's specified common-mode and output-swing limits. Confirm bandwidth, slew rate, distortion, and output-drive requirements in the datasheet before using the device near rail limits.

🧩

Sensor Signal Conditioning

A dual amplifier can support two related sensor-front-end channels, such as amplification and filtering or differential signal conversion. The MC1458DR2's two independent amplifier sections reduce package count while keeping feedback networks close to their corresponding inputs. Input bias current and offset characteristics are important when the source impedance is high, while common-mode range and output swing determine whether the sensor signal can be conditioned without clipping. Validate those parameters for the sensor's excitation and output range.

🔧

Active Filtering

The MC1458DR2 can implement first- and higher-order active filter sections using external resistors and capacitors around its internally compensated amplifier stages. Its dual format allows two filter poles or two related signal paths to be implemented in one SOIC package. Select resistor and capacitor values using the datasheet's recommended feedback arrangement, and check the gain-bandwidth product and slew rate so that the filter remains stable across the intended frequency range and output amplitude.

⚡

Summing and Mixing Amplifier

The MC1458DR2 is explicitly suited to summing-amplifier and mixing circuits because its internally compensated dual amplifiers accept external feedback components. One section can combine several input signals through summing resistors, while the second section can provide inversion, gain adjustment, or a second channel. The summing node must remain within the input common-mode range, and the summed waveform must remain inside the output swing. Use precise resistor tolerances when amplitude accuracy matters.

📺

Waveform Shaping and Integration

The dual amplifier sections can be assigned to integrator, differentiator, or waveform-shaping functions when the feedback network is designed around the device's datasheet limits. Internal compensation makes the basic feedback topology straightforward, although capacitor tolerances and amplifier input bias current can affect accuracy. Keep the integration output away from the supply rails and account for finite gain-bandwidth product, slew rate, and output-current capability during startup and transient conditions.

🏭

Industrial Control and Instrumentation

In industrial instrumentation, the MC1458DR2 can provide low-frequency amplification, error amplification, and signal conditioning around sensors or control comparators. The dual architecture is useful for closed-loop control blocks that require more than one amplifier but do not need a rail-to-rail precision device. Verify the operating temperature range, supply tolerance, output swing, and noise performance against the industrial environment, and use a stable reference ground to reduce measurement error.

What is the MC1458DR2?
The MC1458DR2 is a dual, internally compensated operational amplifier IC from onsemi. It contains two amplifier circuits in an 8-pin SOIC package and is intended for general-purpose analog applications such as summing amplifiers, integrators, feedback-based signal processing, and low-frequency control systems. Its bipolar construction and internal compensation make it a traditional amplifier choice rather than a rail-to-rail precision amplifier.
What is the operating voltage of MC1458DR2?
The exact supply-voltage range for the MC1458DR2 must be taken from the manufacturer datasheet for the exact ordering variant. The product references identify the device as a bipolar, dual operational amplifier, but they do not state the complete input supply limits in the text shown on this page. Check the electrical-characteristics table before connecting external signals or selecting a supply rail.
Where can I download the MC1458DR2 datasheet PDF?
The MC1458DR2 datasheet is accessible through the ChipDig datasheet result and the Rochester Electronics product reference listed in the source links. The product is also indexed by datasheet archives and an electronic-component datasheet service. Use the manufacturer datasheet for authoritative pin names, supply limits, common-mode range, output swing, thermal data, and ordering information before laying out a new PCB.
Where can I find the MC1458DR2 pinout?
The MC1458DR2 uses an 8-pin SOIC package, and its complete pin assignment should be taken from the pin-description table in the manufacturer datasheet. The package information identifies an 8-SOIC, 0.154 inch body with a 3.90 mm width. Because the individual pin names are not present in the product references used for this page, no individual pin functions should be inferred from the package outline alone.
Is the MC1458DR2 a dual operational amplifier?
Yes. The MC1458DR2 is a dual operational amplifier with two amplifier circuits in one 8-pin SOIC package. The two sections have separate input and output pins and share the package power and ground connections. This arrangement is useful when a design needs two similar analog channels, such as a pair of summing stages, two sensor-conditioning channels, or a differential signal-processing front end.
What does internally compensated mean for MC1458DR2?
Internally compensated means that the dominant compensation element is built into the amplifier, so many conventional feedback configurations do not require an external compensation capacitor. The MC1458DR2 is specifically described as an internally compensated dual operational amplifier intended for summing, integrating, and feedback-amplifier applications. The external feedback network still determines gain and impedance, so resistor values should be selected using the datasheet recommended operating conditions.
What is the MC1458DR2 used for in summing-amplifier circuits?
The MC1458DR2 is suitable for summing-amplifier circuits because it provides two internally compensated operational-amplifier sections and works with external feedback components. Each amplifier can use feedback resistors to establish closed-loop gain, while multiple input paths can be combined at the summing node. Check the exact input common-mode range and output swing in the datasheet so that the summed signal remains within the amplifier's linear operating region.
Can MC1458DR2 be used as an integrator?
The MC1458DR2 can be used in an integrator configuration when the feedback network includes a capacitor and the signal levels remain within the amplifier's linear input and output ranges. Integration accuracy depends on resistor tolerance, capacitor quality, input bias current, and the common-mode behavior of the selected amplifier section. Use the datasheet's recommended feedback values and output-swing limits for the operating supply.
Is MC1458DR2 pin-compatible with an LM1458M?
The product references identify MC1458DR2 as an 8-pin SOIC and list LM1458M as a comparable 8-pin amplifier in cross-reference material. However, the cross-reference results shown do not provide a complete manufacturer-level pin-function comparison or an operating-parameter table. Treat the relationship as a candidate for engineering review, not as a guaranteed drop-in replacement, until the pinouts, supply limits, and electrical characteristics have been compared directly.
What is the best drop-in replacement for MC1458DR2?
A guaranteed drop-in replacement cannot be selected from the available cross-reference result alone because it lists candidate types without giving complete MPNs, package details, and electrical comparisons. The MC1458DR2 is an 8-pin SOIC dual amplifier with internally compensated bipolar construction, so any substitute must match the package, pin functions, supply voltage, input/output voltage limits, and stability requirements. Use a manufacturer cross-reference tool or the manufacturer datasheet for the final selection.
When should I choose MC1458DR2 over a newer dual op amp?
Choose MC1458DR2 when an established internally compensated bipolar dual amplifier in an 8-pin SOIC is preferred for a conventional analog design. It is appropriate for feedback-based summing, integrating, filtering, and small-signal applications where the design already accounts for the limitations of a non-rail-to-rail bipolar amplifier. A newer amplifier may be preferable when low-voltage operation, rail-to-rail input or output, lower offset, faster settling, or automotive qualification is required.
Is MC1458DR2 suitable for audio applications?
The MC1458DR2 can be used in small-signal audio and general analog signal-processing circuits because it is a dual, internally compensated operational amplifier. Its suitability for a specific audio path depends on the required bandwidth, slew rate, output swing, noise, distortion, and supply voltage. Verify those electrical characteristics in the manufacturer datasheet and maintain adequate output headroom for the audio waveform.
How should decoupling be handled around MC1458DR2?
Place the supply-bypass capacitor as close as possible to the MC1458DR2 power and ground pins, and keep the connection traces short to reduce inductance and impedance. Use a ground plane that provides a low-impedance return for the amplifier, while separating noisy switching currents from the analog signal path. The product references identify the device as an 8-pin SOIC but do not specify a required capacitor value, so select that value according to the datasheet's recommended application circuit.
How should PCB layout handle the MC1458DR2 inputs?
Keep the two differential input nets short, guarded from adjacent switching and high-current traces, and terminate them consistently with the feedback network. Avoid routing input and feedback nodes beneath noisy circuits or across ground splits, because added leakage and coupling can affect the apparent offset and noise performance. The two amplifier sections may be placed near their associated passive networks, but both should share a stable analog ground reference.
What is the MC1458DR2 power dissipation concern?
Power dissipation depends on the supply voltage, output swing, load current, ambient temperature, and the SOIC thermal resistance. For a dual amplifier, both sections may operate simultaneously, so estimate the total dissipation rather than examining one channel alone. Use the manufacturer maximum supply, current, and temperature limits, and provide adequate copper area and ventilation if the operating dissipation is high.
Where to buy MC1458DR2 online and what is its price?
Use the Request a Quote form on this page to request current MC1458DR2 pricing, stock, lead time, and order details. The product is indexed across several component listings, including Rochester Electronics, onsemi, and other catalog pages, but those listings do not provide a consistent extractable quantity-break table for this exact MPN in the referenced data. The platform therefore displays quote-based purchasing information rather than a static price.
Is MC1458DR2 in stock and what is the lead time?
Stock status and lead time should be confirmed through the Request a Quote form on this page because they can change by package, quantity, and sourcing channel. One product listing describes MC1458DR2 as in stock, while the remaining references are catalog, datasheet, or cross-reference pages without a reliable quantity-specific commitment. Request the exact suffix and required production quantity to obtain a current confirmation.
How does MC1458DR2 compare with an LM1458?
MC1458DR2 and LM1458-family devices are associated with similar dual-amplifier functionality, but a definitive comparison requires the exact alternative MPN. The references show that LM1458M is an 8-pin amplifier candidate, yet they do not establish identical pin functions or electrical limits. Compare offset voltage, bias current, gain-bandwidth product, slew rate, common-mode range, output swing, supply limits, and noise before treating one part as interchangeable with the other.

کے لیے انجینئرنگ ریفرنس ڈیٹا MC1458DR2 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the MC1458DR2 when a legacy or existing design needs a conventional, internally compensated, bipolar dual operational amplifier in an 8-pin SOIC. It is well suited to summing amplifiers, integrators, active filters, small-signal audio paths, and general instrumentation where the supply and signal limits are compatible with the datasheet. MC3403DR is preferable when four amplifier channels are needed or when a quad package reduces the number of ICs. A modern amplifier may be preferable when the design requires rail-to-rail input or output, operation from a very low supply, lower offset, improved noise, faster settling, or automotive qualification. Confirm the exact pinout, supply voltage, common-mode range, output swing, and stability requirements before replacing any existing part.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand onsemi
Package 8-pin SOIC
Amplifier Circuits 2
Compensation Internally compensated
Architecture Bipolar
Maximum Offset Voltage 7.5 mV
MSL Level 3, 168 hours
Mounting Type Surface mount
REACH Status REACH affected

اہم امتیازی خصوصیات

  • Dual amplifier in one 8-pin package (بمقابلہMC3403DR)
  • Established internally compensated bipolar architecture (بمقابلہLM1458M)
  • Documented maximum offset-voltage classification (بمقابلہLM1458M)

ڈیزائن نوٹس

Place the MC1458DR2 close to its feedback resistors and input components. Keep the two differential input routes short, avoid running them beneath switching nodes, and route them away from high-current return paths. The SOIC footprint requires careful thermal-pad-free layout around the eight leads; follow the manufacturer's land pattern and maintain adequate copper around the device for temperature consistency between the two amplifier sections.

Use the manufacturer's recommended supply-bypass arrangement at the device power and ground pins. The capacitor should be placed directly at the pins so that the high-frequency current loop is minimized. Select the bypass capacitance from the datasheet's recommended application circuit rather than relying on a generic value, and confirm that the chosen supply remains within the operating limits across temperature and load transients.

Keep the summing node, integrator capacitor, and feedback-resistor junctions compact because parasitic capacitance and leakage can change the intended transfer function. For high-impedance sources, use guarding and a clean analog ground to reduce leakage and noise pickup. Do not assume rail-to-rail operation; verify the input common-mode range and output swing so that sensor and audio waveforms do not clip or distort near the supply limits.

Estimate total dissipation for both amplifier sections simultaneously, including quiescent current and load-current effects. The exact operating temperature rating and thermal resistance must be taken from the manufacturer datasheet. Provide continuous copper around the SOIC where board area permits, avoid placing the device next to a heat source, and verify that the calculated junction temperature remains below the device limit at the highest expected ambient temperature.

تعمیل کی معلومات

RoHS
Unknown
REACH
Non Compliant
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The GlobalSpec product reference states MSL Level 3 (168 Hours) and REACH Affected. The other compliance fields are not established by the referenced product information.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-11 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

MC1458DR2 datasheet MC1458DR2 pinout MC1458DR2 datasheet pdf MC1458DR2 equivalent MC1458DR2 replacement MC1458DR2 cross reference MC1458DR2 SOIC-8 amplifier MC1458DR2 summing amplifier MC1458DR2 integrator circuit onsemi MC1458DR2 MC1458DR2 price MC1458DR2 stock MC1458DR2 vs LM1458M MC1458DR2 application circuit

متعلقہ اجزاء اور اصطلاحات

onsemi MC1458DR2 MC1458 MC3403DR LM1458M dual operational amplifier operational amplifier analog IC integrated circuit bipolar operational amplifier internally compensated amplifier summing amplifier integrator active filter 8-pin SOIC SOIC package surface-mount package feedback network common-mode input range input bias current input offset voltage gain bandwidth product slew rate REACH MSL
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں