MC9S08GT16CFB - 8-Bit 40MHz 16KB Flash MCU | NXP | 44-QFP
MPN: MC9S08GT16CFB ✗ انتهى عمره الإنتاجيMC9S08GT16CFB نظرة عامة
An 8-bit microcontroller is a microprocessor optimized for embedded control rather than desktop computing. Its architecture integrates a central processing unit, Flash program memory, data memory, interrupt control, timers, serial interfaces, and general-purpose I/O into one device. The S08 instruction set and integrated peripherals allow a system to measure inputs, evaluate control logic, and drive outputs without requiring a separate processor. In the broader semiconductor hierarchy, the MC9S08GT16CFB is an MCU, then a microcontroller, and finally a general-purpose embedded semiconductor.
The principal specifications include an 8-bit CPU, a maximum clock frequency of 40 MHz, and 16 KB, or 16K x 8 bits, of Flash memory. The device provides 38 general-purpose I/O references according to the family description, while another catalog listing identifies 36 I/O lines. This difference may reflect counting conventions between package pins and general-purpose ports, so the pin-description table in the manufacturer datasheet should be used when assigning board functions. The enhanced S08 core also includes the BGND instruction and supports as many as 32 interrupt or reset sources.
The architecture balances processing throughput with integrated peripherals for practical embedded designs. A 40 MHz operating rate allows faster control-loop execution than slower 8-bit devices, while Flash memory permits field-programmable application code. Programmable pull-up options on ports used as inputs, internal pull-ups on RESET and IRQ, and integrated serial and timing functions reduce the number of external components required on common controller boards.
Typical applications include industrial keypad and panel controllers, compact motor or actuator control modules, consumer appliances, sensor-conditioning systems, serial interface adapters, and embedded instrumentation. The 44-QFP format provides more external connections than a small-outline package, making the device suitable when several I/O functions, communication signals, or multiple analog and timer resources are required.
A primary design consideration is package continuity. The MC9S08GT16CFB uses a 44-QFP footprint with 10 mm by 10 mm dimensions. Any proposed substitute must be checked against the complete pin-description table, including power, ground, reset, interrupt, debug, and peripheral multiplexing. Software compatibility alone does not guarantee that a differently packaged MCU can be soldered onto an existing board.
This product page combines the exact ordering code, family-level architecture information, package identification, engineering selection guidance, and verified sourcing references. It also distinguishes genuine same-footprint alternatives from newer MCUs that may offer similar functionality but require a different footprint, firmware configuration, or board redesign.
بدائل مباشرة لـ MC9S08GT16CFB — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MC9S08GT16CFB (نفس عامل الشكل والبصمة) — يختلف في Flash Memory, Package.
MC9S08GT16CFBE
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MC9S08GT16CFBER
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MC9S08GT16CFB الحدود القصوى والخصائص الكهربائية
| Microcontroller Type | 8-bit general-purpose S08 microcontroller |
| CPU Architecture | Enhanced S08 8-bit core |
| أقصى تردد للساعة | 40 MHz |
| Flash Memory | 16 KB (16K x 8 bits) |
| Number of I/O Lines | 36 I/O lines |
| General-Purpose I/O References | 38 references |
| Interrupt and Reset Sources | Up to 32 sources |
| العلبة | 44-QFP (10 mm x 10 mm) |
| نوع التركيب | Surface mount |
| Input Pull-Ups | Software-selectable on ports used as inputs |
| RESET Pin Pull-Up | Internal pull-up |
| IRQ Pin Pull-Up | Internal pull-up |
دليل تكوين أطراف MC9S08GT16CFB 44-qfp (10 mm x 10 mm)
تكوين الأطراف لـ MC9S08GT16CFB (حزمة 44-qfp (10 mm x 10 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MC9S08GT16CFB.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MC9S08GT16CFB مناسب لـ 6 التطبيقs: Industrial keypad and panel control, Compact actuator and motor control, Consumer appliance controller, Sensor conditioning and data acquisition, Serial interface adapter, Embedded instrumentation module.
Industrial keypad and panel control
The MC9S08GT16CFB fits compact human-interface controllers because it combines an enhanced 8-bit S08 core, up to 40 MHz processing, 16 KB of Flash memory, and programmable digital I/O in a 44-QFP package. Its software-selectable input pull-ups can support keys, mode selectors, and contact inputs while reducing unnecessary external resistors. The 10 mm by 10 mm QFP also provides enough pins for display-control signals, status indicators, serial communications, and external interface transceivers. Firmware should use debouncing and validation logic, while the hardware design must follow the manufacturer’s pin-multiplexing and package recommendations.
موصى به
Compact actuator and motor control
The MC9S08GT16CFB can serve as the low-power command processor in a compact actuator or small-motor controller. Its 40 MHz maximum clock supports fast state-machine execution and timing tasks, while 16 KB of Flash accommodates control routines, calibration data, and fault handling. Programmable I/O supports limit switches, direction signals, and fault inputs, but a dedicated external driver and power stage remain necessary for actual motor current. Design the system with hardware shutdown paths, current limiting, thermal protection, and timing margins that do not depend on firmware execution alone.
موصى به
Consumer appliance controller
The MC9S08GT16CFB is appropriate for cost-sensitive appliance controllers that coordinate buttons, indicators, relays, sensors, and a low-speed serial interface. Its 8-bit architecture and 16 KB Flash capacity are suitable for embedded state machines rather than high-end user interfaces, while the 44-QFP package provides a practical number of external connections. Internal pull-ups on RESET and IRQ and selectable input pull-ups can simplify the board. The design must account for motor noise, relay transients, grounding, and safe behavior during firmware faults or power loss.
موصى به
Sensor conditioning and data acquisition
The MC9S08GT16CFB can supervise a small sensor node when the design requires digital I/O, timers, serial data handling, and local logic rather than high-resolution analog conversion. The enhanced S08 core can execute up to 40 MHz, allowing sampling tasks, filtering, threshold decisions, and status reporting to share one controller. Its 16 KB Flash limits total firmware footprint, so code should be modular and diagnostics should be compact. Use the manufacturer’s alternate-function mapping to avoid reserving pins for analog or timer functions that the selected package variant does not support.
موصى به
Serial interface adapter
The MC9S08GT16CFB can act as the protocol engine in a small serial adapter or embedded communications bridge. Its 40 MHz maximum clock provides headroom for byte- or bit-level protocol handling, while programmable I/O supports handshake lines, status indicators, and configuration switches. The 44-QFP package gives the design access to more pins than a minimal controller package and can accommodate separate serial channels or control signals. Firmware must define framing, timeouts, and error recovery, while the PCB should isolate communications lines from noisy switching stages.
موصى به
Embedded instrumentation module
The MC9S08GT16CFB is suitable for a compact instrumentation module that measures discrete inputs, controls calibration lines, and reports status through a serial interface. The enhanced 8-bit S08 core operating up to 40 MHz can combine acquisition sequencing with local calculations and diagnostics, and 16 KB Flash provides space for a calibrated control program. Software-selectable pull-ups can support open-contact sensing where appropriate. For laboratory or industrial deployment, verify supply-voltage limits, temperature range, calibration storage strategy, isolation requirements, and regulatory needs for the finished instrument.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MC9S08GT16CFB — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MC9S08GT16CFBE | MC9S08GT16CFBER |
|---|---|---|---|
| Package | 44-QFP (10x10) | 44-QFP (10x10) | 44-QFP (10x10) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Architecture | Enhanced 8-bit S08 core | Enhanced 8-bit S08 core | Enhanced 8-bit S08 core |
| Maximum Clock Frequency | 40 MHz | 40 MHz | 40 MHz |
| Flash Memory | 16 KB (16K x 8 bits) | 16 KB (16K x 8 bits) | 16 KB (16K x 8 bits) |
| Interrupt and Reset Sources | Up to 32 sources | Up to 32 sources | Up to 32 sources |
| Ordering-Code Suffix | CFB | CFBE | CFBER |
أبرز الفروقات
- Exact 44-QFP family continuity (مقابلMC9S08GT16CFBE)
- Existing S08 firmware compatibility path (مقابلMC9S08GT16CFBER)
- Broad peripheral integration without an external processor (مقابلMC9S08GT16CFBE)
ملاحظات التصميم
Do not treat MC9S08GT16A-series devices as direct substitutes merely because they belong to the GT family. Package options and alternate-function assignments differ, and a newer MCU can require a different footprint, startup routine, clock configuration, or toolchain. For board-level replacement, compare the 44-QFP pin table line by line, including supply pins, ground pins, RESET, IRQ, debug signals, and every multiplexed peripheral connection.
Use the manufacturer’s 44-QFP land pattern and verify it against the current package drawing before releasing Gerber files. Keep decoupling capacitors adjacent to the device power pins, provide a clean ground reference, and route high-current or switching-node connections away from sensitive control and serial signals. Because many S08 pins support alternate functions, reserve pins for reset, programming, debug, and boot control before assigning general-purpose I/O.
The operating-voltage range and external-clock requirements must be taken from the manufacturer electrical characteristics before selecting supply tolerances or oscillator components. Decoupling should follow the datasheet’s recommended network, including local high-frequency bypass in addition to bulk capacitance. Account for startup current, peripheral load, and any external interface circuitry when sizing the supply so the MCU does not experience an unintended reset or brownout during power sequencing.
Firmware configuration can invalidate an otherwise pin-compatible replacement. Review reset-vector behavior, watchdog use, clock-divider settings, flash wait-state requirements, interrupt priorities, and peripheral multiplexing after substituting a different ordering suffix. Run boundary tests for brownout, watchdog reset, serial framing, timer inputs, and simultaneous interrupts. A hardware-compatible part is production-ready only after its software behavior has also been validated.
معلومات الامتثال
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was found for the exact ordering code. Confirm compliance with the manufacturer or the organization retaining the original product record.