NXP Semiconductors

MC9S08GT16CFB - 8-Bit 40MHz 16KB Flash MCU | NXP | 44-QFP

MPN: MC9S08GT16CFB ✗ जीवन की समाप्ति
44-QFP (10 mm x 10 mm) Package 40 MHz Speed 16 KB (16K x 8 bits) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

MC9S08GT16CFB अवलोकन

The NXP Semiconductors MC9S08GT16CFB is an 8-bit S08 microcontroller operating at up to 40 MHz, with 16 KB of embedded Flash memory in a 44-QFP surface-mount package measuring 10 mm by 10 mm. It belongs to the MC9S08GT family of general-purpose microcontrollers and is designed for cost-sensitive embedded control applications that require an economical processor, integrated programmable I/O, and a compact pin-compatible package option.

An 8-bit microcontroller is a microprocessor optimized for embedded control rather than desktop computing. Its architecture integrates a central processing unit, Flash program memory, data memory, interrupt control, timers, serial interfaces, and general-purpose I/O into one device. The S08 instruction set and integrated peripherals allow a system to measure inputs, evaluate control logic, and drive outputs without requiring a separate processor. In the broader semiconductor hierarchy, the MC9S08GT16CFB is an MCU, then a microcontroller, and finally a general-purpose embedded semiconductor.

The principal specifications include an 8-bit CPU, a maximum clock frequency of 40 MHz, and 16 KB, or 16K x 8 bits, of Flash memory. The device provides 38 general-purpose I/O references according to the family description, while another catalog listing identifies 36 I/O lines. This difference may reflect counting conventions between package pins and general-purpose ports, so the pin-description table in the manufacturer datasheet should be used when assigning board functions. The enhanced S08 core also includes the BGND instruction and supports as many as 32 interrupt or reset sources.

The architecture balances processing throughput with integrated peripherals for practical embedded designs. A 40 MHz operating rate allows faster control-loop execution than slower 8-bit devices, while Flash memory permits field-programmable application code. Programmable pull-up options on ports used as inputs, internal pull-ups on RESET and IRQ, and integrated serial and timing functions reduce the number of external components required on common controller boards.

Typical applications include industrial keypad and panel controllers, compact motor or actuator control modules, consumer appliances, sensor-conditioning systems, serial interface adapters, and embedded instrumentation. The 44-QFP format provides more external connections than a small-outline package, making the device suitable when several I/O functions, communication signals, or multiple analog and timer resources are required.

A primary design consideration is package continuity. The MC9S08GT16CFB uses a 44-QFP footprint with 10 mm by 10 mm dimensions. Any proposed substitute must be checked against the complete pin-description table, including power, ground, reset, interrupt, debug, and peripheral multiplexing. Software compatibility alone does not guarantee that a differently packaged MCU can be soldered onto an existing board.

This product page combines the exact ordering code, family-level architecture information, package identification, engineering selection guidance, and verified sourcing references. It also distinguishes genuine same-footprint alternatives from newer MCUs that may offer similar functionality but require a different footprint, firmware configuration, or board redesign.

के लिए ड्रॉप-इन विकल्प MC9S08GT16CFB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC9S08GT16CFB (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Flash Memory, Package.

NXP Semiconductors
Flash Memory: 16 KB (16K x 8)
Package: 44-QFP (10x10 mm)
इसके साथ तुलना करें MC9S08GT16CFB →

MC9S08GT16CFBE

✅ ड्रॉप-इन
NXP Semiconductors
📦 44-QFP (10x10)
S08 (HCS08) 8-bit CISC · 8-Bit · 40 MHz · 16 KB (16K x 8) · 2 KB · None (Flash-based) · 2.5 V / 3.3 V · 10-bit (8 channels)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MC9S08GT16CFBER

✅ ड्रॉप-इन
📦 44-QFP (10x10)
Flash remains 16 KB and maximum clock remains 40 MHz, a 0% difference in both headline parameters; the ER suffix adds an ordering-code grade or temperature distinction.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MC9S08GT16CFB Maximum Ratings और Electrical Characteristics

Microcontroller Type 8-bit general-purpose S08 microcontroller
CPU Architecture Enhanced S08 8-bit core
अधिकतम क्लॉक फ़्रीक्वेंसी 40 MHz
Flash Memory 16 KB (16K x 8 bits)
Number of I/O Lines 36 I/O lines
General-Purpose I/O References 38 references
Interrupt and Reset Sources Up to 32 sources
पैकेज 44-QFP (10 mm x 10 mm)
माउंटिंग प्रकार Surface mount
Input Pull-Ups Software-selectable on ports used as inputs
RESET Pin Pull-Up Internal pull-up
IRQ Pin Pull-Up Internal pull-up

MC9S08GT16CFB 44-qfp (10 mm x 10 mm) पिन कॉन्फ़िगरेशन गाइड

MC9S08GT16CFB (44-qfp (10 mm x 10 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

MC9S08GT16CFB के लिए 44-qfp (10 mm x 10 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC9S08GT16CFB.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MC9S08GT16CFB के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial keypad and panel control, Compact actuator and motor control, Consumer appliance controller, Sensor conditioning and data acquisition, Serial interface adapter, Embedded instrumentation module.

🏭

Industrial keypad and panel control

The MC9S08GT16CFB fits compact human-interface controllers because it combines an enhanced 8-bit S08 core, up to 40 MHz processing, 16 KB of Flash memory, and programmable digital I/O in a 44-QFP package. Its software-selectable input pull-ups can support keys, mode selectors, and contact inputs while reducing unnecessary external resistors. The 10 mm by 10 mm QFP also provides enough pins for display-control signals, status indicators, serial communications, and external interface transceivers. Firmware should use debouncing and validation logic, while the hardware design must follow the manufacturer’s pin-multiplexing and package recommendations.

⚡

Compact actuator and motor control

The MC9S08GT16CFB can serve as the low-power command processor in a compact actuator or small-motor controller. Its 40 MHz maximum clock supports fast state-machine execution and timing tasks, while 16 KB of Flash accommodates control routines, calibration data, and fault handling. Programmable I/O supports limit switches, direction signals, and fault inputs, but a dedicated external driver and power stage remain necessary for actual motor current. Design the system with hardware shutdown paths, current limiting, thermal protection, and timing margins that do not depend on firmware execution alone.

🏠

Consumer appliance controller

The MC9S08GT16CFB is appropriate for cost-sensitive appliance controllers that coordinate buttons, indicators, relays, sensors, and a low-speed serial interface. Its 8-bit architecture and 16 KB Flash capacity are suitable for embedded state machines rather than high-end user interfaces, while the 44-QFP package provides a practical number of external connections. Internal pull-ups on RESET and IRQ and selectable input pull-ups can simplify the board. The design must account for motor noise, relay transients, grounding, and safe behavior during firmware faults or power loss.

🧩

Sensor conditioning and data acquisition

The MC9S08GT16CFB can supervise a small sensor node when the design requires digital I/O, timers, serial data handling, and local logic rather than high-resolution analog conversion. The enhanced S08 core can execute up to 40 MHz, allowing sampling tasks, filtering, threshold decisions, and status reporting to share one controller. Its 16 KB Flash limits total firmware footprint, so code should be modular and diagnostics should be compact. Use the manufacturer’s alternate-function mapping to avoid reserving pins for analog or timer functions that the selected package variant does not support.

🌐

Serial interface adapter

The MC9S08GT16CFB can act as the protocol engine in a small serial adapter or embedded communications bridge. Its 40 MHz maximum clock provides headroom for byte- or bit-level protocol handling, while programmable I/O supports handshake lines, status indicators, and configuration switches. The 44-QFP package gives the design access to more pins than a minimal controller package and can accommodate separate serial channels or control signals. Firmware must define framing, timeouts, and error recovery, while the PCB should isolate communications lines from noisy switching stages.

🔧

Embedded instrumentation module

The MC9S08GT16CFB is suitable for a compact instrumentation module that measures discrete inputs, controls calibration lines, and reports status through a serial interface. The enhanced 8-bit S08 core operating up to 40 MHz can combine acquisition sequencing with local calculations and diagnostics, and 16 KB Flash provides space for a calibrated control program. Software-selectable pull-ups can support open-contact sensing where appropriate. For laboratory or industrial deployment, verify supply-voltage limits, temperature range, calibration storage strategy, isolation requirements, and regulatory needs for the finished instrument.

What is the MC9S08GT16CFB?
The MC9S08GT16CFB is an 8-bit S08 general-purpose microcontroller with a maximum clock frequency of 40 MHz and 16 KB of Flash memory. According to the manufacturer family documentation, it uses the enhanced S08 core, supports up to 32 interrupt or reset sources, and is offered in a 44-QFP package measuring 10 mm by 10 mm. It is intended for embedded control systems where an integrated CPU, programmable I/O, serial functions, and timers are needed in one compact device.
What are the key specifications of MC9S08GT16CFB?
The MC9S08GT16CFB combines an 8-bit enhanced S08 CPU, operation up to 40 MHz, and 16 KB of Flash program memory in a 44-QFP surface-mount package. The family documentation also identifies software-selectable input pull-ups, internal pull-ups on RESET and IRQ, and support for as many as 32 interrupt or reset sources. Catalog information lists 36 I/O lines, while another family description refers to 38 general-purpose I/O references, so the manufacturer pin table remains the authoritative guide for physical assignments.
Where can I download the MC9S08GT16CFB datasheet PDF?
The MC9S08GT16CFB datasheet PDF is available from the linked manufacturer-document mirror and from the dedicated MC9S08GT16 datasheet listing. The document describes the enhanced S08 core, 40 MHz maximum operating frequency, 16 KB Flash memory, interrupt behavior, peripherals, and the 44-QFP case outline. Download the current manufacturer document before final PCB or firmware work, and verify its revision against the device markings and sourcing record.
Where can I find the MC9S08GT16CFB pinout?
The MC9S08GT16CFB pinout is documented in the manufacturer data book for the MC9S08GT16 family and the 44-QFP case-outline information. Because this controller combines general-purpose I/O with multiplexed peripheral functions, a single physical pin can have several possible roles. Use the signal-name, direction, reset-state, and alternate-function tables in the datasheet rather than relying only on a generic 44-pin drawing. The package dimensions are 10 mm by 10 mm.
How much Flash memory does the MC9S08GT16CFB have?
The MC9S08GT16CFB contains 16 KB of Flash memory, identified in product listings as 16K x 8 bits. Flash is used for nonvolatile program storage, allowing firmware to remain in the device when power is removed. The enhanced S08 CPU can execute up to 40 MHz. When planning application capacity, reserve space for the bootloader, configuration data, interrupt vectors, calibration values, and application code rather than assigning the entire 16 KB to the main program.
What is the MC9S08GT16CFB clock speed?
The MC9S08GT16CFB supports a maximum operating frequency of 40 MHz. Its architecture is an enhanced S08 8-bit core, and family documentation identifies support for as many as 32 interrupt or reset sources. Actual control-loop performance also depends on bus wait states, flash access timing, peripheral clocking, and interrupt latency. Validate the external oscillator, bus timing, and voltage configuration against the manufacturer electrical characteristics before using the maximum frequency in production.
Can MC9S08GT16CFB be used in an industrial control application?
The MC9S08GT16CFB can be used in industrial control applications when the electrical, temperature, qualification, and lifecycle requirements of the specific orderable part are acceptable. Its 8-bit S08 core, 40 MHz maximum clock, 16 KB Flash memory, integrated timers, serial interfaces, and programmable I/O are well suited to compact keypad, actuator, appliance, and instrumentation controllers. For safety-critical or long-life industrial deployments, confirm operating-temperature limits, AEC-Q100 status, and current product lifecycle before design release.
What is the best drop-in replacement for MC9S08GT16CFB?
The closest documented same-footprint choices are MC9S08GT16CFBE and MC9S08GT16CFBER, both of which are identified with the same 8-bit, 40 MHz, 16 KB Flash device class in the 44-QFP package. Exact interchangeability still depends on the temperature suffix, device revision, pin functions, and qualification requirements. Confirm the ordering-code meaning in the manufacturer documentation and compare every power, reset, debug, and multiplexed peripheral pin before replacing an assembled design.
Can MC9S08GT16CFBE replace MC9S08GT16CFB?
MC9S08GT16CFBE can be a candidate replacement for MC9S08GT16CFB because it is listed in the same 44-QFP device family with the same 8-bit architecture, 40 MHz maximum frequency, and 16 KB Flash configuration. The ordering-code difference may indicate a temperature or grade change, so it must not be treated as automatic without checking the suffix definitions. Confirm pin behavior, clock, power, reset, and environmental requirements, then validate the existing firmware on the replacement device.
What can replace MC9S08GT16CFB?
MC9S08GT16CFBE and MC9S08GT16CFBER are the most defensible replacement candidates because their listings identify the same 44-QFP package and the same principal MCU ratings: 8-bit processing, 40 MHz maximum clock, and 16 KB Flash memory. Newer 8-bit MCU families may provide useful functions, but they are not automatically drop-in replacements. Their architecture, package, peripheral mapping, startup behavior, and firmware toolchain can require PCB and software changes.
MC9S08GT16CFB vs MC9S08GT16CFBE - which is better?
MC9S08GT16CFB and MC9S08GT16CFBE share the same documented 8-bit S08 architecture, 40 MHz maximum operating frequency, 16 KB Flash memory, and 44-QFP package. The principal selection point is the meaning of the ordering suffix, which can distinguish temperature grade or device revision. Choose the variant whose environmental rating and pin behavior match the existing design. If both suffixes have identical requirements, preserving the original ordering code generally minimizes procurement and validation risk.
When should I choose MC9S08GT16CFB over a newer MCU?
Choose MC9S08GT16CFB when maintaining an existing 44-QFP S08 design, reusing qualified firmware, or avoiding a PCB redesign is more important than adopting a newer MCU architecture. Its 40 MHz enhanced S08 core and 16 KB Flash memory remain sufficient for many compact control tasks. Select a newer MCU instead when the system requires substantially more memory, faster 32-bit processing, modern connectivity, a current automotive or industrial qualification, or a supported long-term software roadmap.
Is MC9S08GT16CFB suitable for a motor-control application?
The MC9S08GT16CFB is suitable for some compact actuator or motor-control tasks that fit its timers, I/O, Flash capacity, and 8-bit processing requirements. Its 40 MHz maximum clock can support deterministic control logic, while programmable port pull-ups can reduce external hardware. The controller does not include a dedicated high-power motor driver, so the design must add suitable gate-drive, power-stage, current-sensing, protection, and thermal-management circuitry. Validate timing and worst-case electrical conditions before enabling a motor.
Where to buy MC9S08GT16CFB online?
Use the Request a Quote form on this page to request MC9S08GT16CFB availability, current lead time, and an order quotation. The exact ordering code should include the 16 KB Flash option, 44-QFP package, operating-temperature suffix, and required delivery form. Because this is an older S08-family component, request written confirmation of lifecycle status, lot traceability, date codes, and authorized-channel authenticity before committing a production build.
What is the price of MC9S08GT16CFB?
Use the Request a Quote form on this page for the current MC9S08GT16CFB quotation. Pricing for an older MCU can vary with the exact ordering suffix, quantity, delivery form, and remaining factory inventory, so a stale catalog figure should not be treated as a current offer. Include the target quantity, package suffix, temperature requirement, date-code preference, and destination country in the request to obtain a commercially meaningful response.
Is MC9S08GT16CFB in stock and what is its lead time?
Submit the MC9S08GT16CFB request through the Request a Quote form on this page to confirm current stock and lead time. The component is from the mature S08 generation, and availability can depend on residual factory stock rather than regular high-volume production. A complete request should state the exact MPN, annual and prototype quantities, acceptable delivery window, date-code requirement, and whether substitutions are permitted if the original part is unavailable.

के लिए इंजीनियरिंग संदर्भ डेटा MC9S08GT16CFB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MC9S08GT16CFB when maintaining an existing S08-based 44-QFP design or building a compact controller around a 40 MHz 8-bit core and 16 KB Flash memory. MC9S08GT16CFBE is the closest same-family candidate when the manufacturer suffix definition matches the required temperature grade and device configuration. MC9S08GT16CFBER offers another same-footprint ordering option whose grade and temperature characteristics must be checked. All three candidates require confirmation of pin multiplexing, electrical limits, qualification, and firmware behavior. Do not select a newer MCU solely by processor speed or memory size: a different package, peripheral map, startup model, or development toolchain may turn a replacement into a redesign. For new designs with substantially greater memory, connectivity, security, or long-term lifecycle requirements, compare current MCU families rather than assuming this mature S08 platform is the best platform.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MC9S08GT16CFBE MC9S08GT16CFBER
Package 44-QFP (10x10) 44-QFP (10x10) 44-QFP (10x10)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Architecture Enhanced 8-bit S08 core Enhanced 8-bit S08 core Enhanced 8-bit S08 core
Maximum Clock Frequency 40 MHz 40 MHz 40 MHz
Flash Memory 16 KB (16K x 8 bits) 16 KB (16K x 8 bits) 16 KB (16K x 8 bits)
Interrupt and Reset Sources Up to 32 sources Up to 32 sources Up to 32 sources
Ordering-Code Suffix CFB CFBE CFBER

मुख्य विशेषताएँ

  • Exact 44-QFP family continuity (बनामMC9S08GT16CFBE)
  • Existing S08 firmware compatibility path (बनामMC9S08GT16CFBER)
  • Broad peripheral integration without an external processor (बनामMC9S08GT16CFBE)

डिज़ाइन नोट्स

Do not treat MC9S08GT16A-series devices as direct substitutes merely because they belong to the GT family. Package options and alternate-function assignments differ, and a newer MCU can require a different footprint, startup routine, clock configuration, or toolchain. For board-level replacement, compare the 44-QFP pin table line by line, including supply pins, ground pins, RESET, IRQ, debug signals, and every multiplexed peripheral connection.

Use the manufacturer’s 44-QFP land pattern and verify it against the current package drawing before releasing Gerber files. Keep decoupling capacitors adjacent to the device power pins, provide a clean ground reference, and route high-current or switching-node connections away from sensitive control and serial signals. Because many S08 pins support alternate functions, reserve pins for reset, programming, debug, and boot control before assigning general-purpose I/O.

The operating-voltage range and external-clock requirements must be taken from the manufacturer electrical characteristics before selecting supply tolerances or oscillator components. Decoupling should follow the datasheet’s recommended network, including local high-frequency bypass in addition to bulk capacitance. Account for startup current, peripheral load, and any external interface circuitry when sizing the supply so the MCU does not experience an unintended reset or brownout during power sequencing.

Firmware configuration can invalidate an otherwise pin-compatible replacement. Review reset-vector behavior, watchdog use, clock-divider settings, flash wait-state requirements, interrupt priorities, and peripheral multiplexing after substituting a different ordering suffix. Run boundary tests for brownout, watchdog reset, serial framing, timer inputs, and simultaneous interrupts. A hardware-compatible part is production-ready only after its software behavior has also been validated.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was found for the exact ordering code. Confirm compliance with the manufacturer or the organization retaining the original product record.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MC9S08GT16CFB MC9S08GT16CFB datasheet MC9S08GT16CFB datasheet pdf MC9S08GT16CFB pinout MC9S08GT16CFB specifications MC9S08GT16CFB equivalent MC9S08GT16CFB replacement MC9S08GT16CFB cross reference MC9S08GT16CFB footprint NXP MC9S08GT16CFB MC9S08GT16CFB price MC9S08GT16CFB stock MC9S08GT16CFB vs MC9S08GT16CFBE 44-QFP 8-bit 40MHz microcontroller

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors Freescale Semiconductor MC9S08GT16CFB MC9S08GT16CFBE MC9S08GT16CFBER MC9S08GT16 MC9S08GT16A S08 architecture enhanced S08 core 8-bit microcontroller embedded microcontroller semiconductor general-purpose MCU 44-QFP package QFN family surface-mount package Flash memory programmable I/O 40 MHz clock interrupt controller RESET pin IRQ pin industrial control serial interface embedded instrumentation
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें