MC9S08PA8VWJ - 8-Bit 20MHz 8KB Flash MCU | NXP
MPN: MC9S08PA8VWJ ✓ نشطMC9S08PA8VWJ نظرة عامة
An 8-bit microcontroller is a compact embedded controller built around an 8-bit central processing unit, flash program memory, data memory, and dedicated peripheral modules. MC9S08PA8VWJ belongs to the S08 family of 8-bit microcontrollers and sits within the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. Its combination of an HCS08L core and integrated analog and timing resources is useful when a product requires local control without the cost or complexity of a higher-performance processor.
Key features include up to 20 MHz operation, 8 KB of read, program, and erase flash, 8 KB of SRAM listed in distributor listings, and support for as many as 40 interrupt or reset sources. The integrated ADC supports cost-effective analog measurement, while the analog comparator and motor-control FlexTimer reduce the need for separate peripheral components. Four levels of nested interrupt support provide deterministic control for embedded tasks and real-time event handling.
The device is specified for operation from 2.7 V to 5.5 V across a temperature range of -40 °C to 105 °C. This voltage and temperature coverage allows the same architecture to serve industrial controls, appliance controllers, sensor modules, compact motor-control boards, and consumer products. Its 20-pin SOIC package is also compatible with conventional surface-mount assembly and board-layout practices used for small embedded controllers.
Typical applications include low-cost appliance control, industrial sensing, compact motor control, analog monitoring, and small consumer products. The integrated ADC is particularly useful when a design must measure an analog sensor input, while the FlexTimer and comparators support timing-sensitive and threshold-based functions. Software can also use the interrupt structure to coordinate multiple control events without requiring a separate programmable logic device.
For a new design, confirm the exact peripheral assignment, pin multiplexing, programming method, and memory map against the manufacturer datasheet before assigning PCB functions. Decoupling and signal-integrity requirements should be planned around the power pins and any communication signals used by the product. The 20-pin footprint limits pin count, so applications requiring many external signals should begin with a complete pin-level feasibility review.
This product page brings together the core device specifications, package information, sourcing guidance, practical application context, and drop-in alternatives for engineers evaluating an MC9S08PA8VWJ-based design. It supports faster initial screening while the manufacturer datasheet remains the controlling reference for detailed electrical limits, registers, timing, and board implementation.
بدائل مباشرة لـ MC9S08PA8VWJ — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MC9S08PA8VWJ (نفس عامل الشكل والبصمة) — يختلف في Analog Comparator, CPU Core, Operating Temperature Range, Package.
MC9S08PA8AMTG
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MC9S08PA8VWJ الحدود القصوى والخصائص الكهربائية
| Microcontroller Type | 8-bit S08 microcontroller |
| CPU Core | HCS08L core |
| Maximum Bus Frequency | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| Program Memory Type | Flash |
| SRAM | 8 KB |
| EEPROM | Integrated |
| ADC | Integrated |
| Analog Comparator | Integrated |
| Motor Control Timer | Motor control FlexTimer |
| Maximum Interrupt and Reset Sources | 40 sources |
| Nested Interrupt Levels | 4 levels |
| Operating Voltage Range | 2.7 V to 5.5 V |
| Supported Supply Levels | 3.3 V and 5 V |
| نطاق درجة حرارة التشغيل | -40 °C to 105 °C |
| العلبة | 20-pin SOIC |
| نوع التركيب | Surface mount |
دليل تكوين أطراف MC9S08PA8VWJ 20-pin soic
تكوين الأطراف لـ MC9S08PA8VWJ (حزمة 20-pin soic). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MC9S08PA8VWJ.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MC9S08PA8VWJ مناسب لـ 6 التطبيقs: Cost-Sensitive Industrial Control, Appliance and Consumer Equipment, Compact Motor-Control Module, Analog Sensor Interface, Low-Power Embedded Control, Timing and Threshold Control.
Cost-Sensitive Industrial Control
The MC9S08PA8VWJ fits compact industrial controllers that require an 8-bit processor, 20 MHz maximum bus speed, and integrated timing resources without the overhead of a 32-bit MCU. Its 8 KB flash and 8 KB SRAM provide space for a focused control program, while the ADC and analog comparator support direct sensing and threshold decisions. The 2.7 V to 5.5 V range accommodates common industrial supply levels. Place bypass capacitors according to the NXP datasheet and isolate analog inputs from noisy switching paths.
موصى به
Appliance and Consumer Equipment
The MC9S08PA8VWJ is suitable for appliances and consumer products where local logic must be economical, compact, and reliable. Its 20-pin SOIC package supports straightforward surface-mount assembly, while the integrated ADC can read analog controls or sensors without a separate converter. The S08 CPU operates at up to 20 MHz, and 8 KB of flash accommodates a dedicated application program. Designers should use the exact package drawing and pin multiplexing table when assigning display, sensing, and actuator-control functions.
موصى به
Compact Motor-Control Module
The MC9S08PA8VWJ fits small motor-control modules because it combines an HCS08L core with a dedicated motor-control FlexTimer, analog comparators, and an ADC. These resources can support timing, current or position sensing, and control-loop updates within one compact 20-pin package. The controller operates from 2.7 V to 5.5 V and includes flash, SRAM, and EEPROM for application code and retained parameters. Validate timing, noise immunity, thermal performance, and actuator drive circuitry for the specific motor.
موصى به
Analog Sensor Interface
The MC9S08PA8VWJ can serve as the controller for a compact analog sensor interface because its integrated ADC and analog comparator reduce the need for external signal-conditioning components. The 8-bit CPU can perform thresholding, calibration, filtering, and digital reporting at up to 20 MHz, while 8 KB of SRAM supports temporary measurement data. Its 2.7 V minimum operating voltage offers flexibility for low-power sensor systems. Keep high-impedance analog traces short and use grounded guarding techniques where the sensor source impedance is high.
موصى به
Low-Power Embedded Control
The MC9S08PA8VWJ works for low-power embedded controls that need deterministic interrupt handling, local EEPROM, and a compact set of analog and timing peripherals. The architecture supports up to 40 interrupt or reset sources and four levels of nested interrupts, allowing important events to be prioritized. Its 2.7 V to 5.5 V operating range supports energy-conscious 3.3 V systems, while the 20-pin SOIC package limits board area. Actual standby and active-current behavior should be evaluated against the product power budget.
موصى به
Timing and Threshold Control
The MC9S08PA8VWJ is appropriate for products that combine timed events with analog threshold decisions. Its integrated timers, analog comparator, ADC, and interrupt structure can monitor inputs and coordinate control actions without external programmable logic. The 20 MHz maximum bus speed and four-level nested interrupt capability provide useful responsiveness for compact embedded tasks. Confirm timer clocking, input-tolerance limits, and interrupt priorities in the manufacturer datasheet, and include tests for startup, overload, and out-of-range sensor conditions.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MC9S08PA8VWJ — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MC9S08PA8AMTG |
|---|---|---|
| Package | 20-pin SOIC | 20-pin SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors |
| CPU Core | 8-bit HCS08L | 8-bit HCS08L |
| Maximum Bus Frequency | 20 MHz | 20 MHz |
| Flash Memory | 8 KB | 8 KB |
| SRAM | 8 KB | 8 KB |
| Operating Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Operating Temperature Range | -40 °C to 105 °C | -40 °C to 105 °C |
| ADC | Integrated | Integrated |
| Analog Comparator | Integrated | Integrated |
| Motor Control Timer | Motor control FlexTimer | Motor control FlexTimer |
أبرز الفروقات
- Integration reduces external analog and timing components (مقابلMC9S08PA8AMTG)
- 20 MHz performance with modest memory requirements (مقابلMC9S08PA8AMTG)
- Broad supply-voltage range (مقابلMC9S08PA8AMTG)
ملاحظات التصميم
Follow the NXP recommended layout for bypass capacitors and route the ground return directly to the device ground pins. Place input capacitors close to the supply entry and output-capacitor requirements close to the relevant pins. Confirm the pin-one orientation and exposed package geometry against the exact ordering-code drawing before fabrication; the 20-pin footprint leaves little room for last-minute rerouting.
Keep analog comparator and ADC inputs away from switching edges, motor-drive nodes, and high-current return paths. Use a continuous ground reference beneath sensitive routes where board construction permits, and terminate unused inputs according to the datasheet guidance. Verify acquisition timing and source impedance with the intended sensor or divider because the 8-bit conversion result also depends on conditioning, reference stability, and firmware averaging.
Do not assume that parts sharing the MC9S08PA8 base designation have identical suffix attributes. Before substituting MC9S08PA8AMTG, compare the ordering-information entries for clock range, temperature grade, qualification, flash organization, SRAM, package dimensions, and pin multiplexing. Recheck reset, clock, debug, and programming requirements as well; a shared family name alone does not establish production interchangeability.
Budget the MCU supply across the full 2.7 V to 5.5 V operating range and include margin for connected sensors and I/O loads. Check absolute maximum ratings, operating voltage, and power-consumption tables in the manufacturer datasheet for the selected configuration. Use local decoupling to limit supply disturbance from timer switching and peripheral activity, and validate the rail during motor startup or other high-current events.
The -40 °C to 105 °C specification defines the operating range but does not mean the device dissipates its maximum power at every temperature. Use the package power data and application thermal information to evaluate the chosen PCB footprint. For compact enclosed products, confirm that copper area, airflow, and nearby heat sources keep the operating conditions within the manufacturer limits.
معلومات الامتثال
The available manufacturer and distributor information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Request the current compliance and qualification documents for the exact ordering code.