MC9S08PA8VWJ - 8-Bit 20MHz 8KB Flash MCU | NXP
MPN: MC9S08PA8VWJ ✓ פעילMC9S08PA8VWJ סקירה
An 8-bit microcontroller is a compact embedded controller built around an 8-bit central processing unit, flash program memory, data memory, and dedicated peripheral modules. MC9S08PA8VWJ belongs to the S08 family of 8-bit microcontrollers and sits within the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. Its combination of an HCS08L core and integrated analog and timing resources is useful when a product requires local control without the cost or complexity of a higher-performance processor.
Key features include up to 20 MHz operation, 8 KB of read, program, and erase flash, 8 KB of SRAM listed in distributor listings, and support for as many as 40 interrupt or reset sources. The integrated ADC supports cost-effective analog measurement, while the analog comparator and motor-control FlexTimer reduce the need for separate peripheral components. Four levels of nested interrupt support provide deterministic control for embedded tasks and real-time event handling.
The device is specified for operation from 2.7 V to 5.5 V across a temperature range of -40 °C to 105 °C. This voltage and temperature coverage allows the same architecture to serve industrial controls, appliance controllers, sensor modules, compact motor-control boards, and consumer products. Its 20-pin SOIC package is also compatible with conventional surface-mount assembly and board-layout practices used for small embedded controllers.
Typical applications include low-cost appliance control, industrial sensing, compact motor control, analog monitoring, and small consumer products. The integrated ADC is particularly useful when a design must measure an analog sensor input, while the FlexTimer and comparators support timing-sensitive and threshold-based functions. Software can also use the interrupt structure to coordinate multiple control events without requiring a separate programmable logic device.
For a new design, confirm the exact peripheral assignment, pin multiplexing, programming method, and memory map against the manufacturer datasheet before assigning PCB functions. Decoupling and signal-integrity requirements should be planned around the power pins and any communication signals used by the product. The 20-pin footprint limits pin count, so applications requiring many external signals should begin with a complete pin-level feasibility review.
This product page brings together the core device specifications, package information, sourcing guidance, practical application context, and drop-in alternatives for engineers evaluating an MC9S08PA8VWJ-based design. It supports faster initial screening while the manufacturer datasheet remains the controlling reference for detailed electrical limits, registers, timing, and board implementation.
חלופות תחליף ישיר עבור MC9S08PA8VWJ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MC9S08PA8VWJ (אותו גורם צורה וטביעת רגל) — שונים ב Analog Comparator, CPU Core, Operating Temperature Range, Package.
MC9S08PA8AMTG
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MC9S08PA8VWJ דירוגים מרביים ומאפיינים חשמליים
| Microcontroller Type | 8-bit S08 microcontroller |
| CPU Core | HCS08L core |
| Maximum Bus Frequency | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| Program Memory Type | Flash |
| SRAM | 8 KB |
| EEPROM | Integrated |
| ADC | Integrated |
| Analog Comparator | Integrated |
| Motor Control Timer | Motor control FlexTimer |
| Maximum Interrupt and Reset Sources | 40 sources |
| Nested Interrupt Levels | 4 levels |
| Operating Voltage Range | 2.7 V to 5.5 V |
| Supported Supply Levels | 3.3 V and 5 V |
| טווח טמפרטורת פעולה | -40 °C to 105 °C |
| מארז | 20-pin SOIC |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של MC9S08PA8VWJ 20-pin soic
תצורת פינים עבור MC9S08PA8VWJ (מארזת 20-pin soic). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MC9S08PA8VWJ.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC9S08PA8VWJ מתאים עבור 6 יישוםs: Cost-Sensitive Industrial Control, Appliance and Consumer Equipment, Compact Motor-Control Module, Analog Sensor Interface, Low-Power Embedded Control, Timing and Threshold Control.
Cost-Sensitive Industrial Control
The MC9S08PA8VWJ fits compact industrial controllers that require an 8-bit processor, 20 MHz maximum bus speed, and integrated timing resources without the overhead of a 32-bit MCU. Its 8 KB flash and 8 KB SRAM provide space for a focused control program, while the ADC and analog comparator support direct sensing and threshold decisions. The 2.7 V to 5.5 V range accommodates common industrial supply levels. Place bypass capacitors according to the NXP datasheet and isolate analog inputs from noisy switching paths.
מומלץ
Appliance and Consumer Equipment
The MC9S08PA8VWJ is suitable for appliances and consumer products where local logic must be economical, compact, and reliable. Its 20-pin SOIC package supports straightforward surface-mount assembly, while the integrated ADC can read analog controls or sensors without a separate converter. The S08 CPU operates at up to 20 MHz, and 8 KB of flash accommodates a dedicated application program. Designers should use the exact package drawing and pin multiplexing table when assigning display, sensing, and actuator-control functions.
מומלץ
Compact Motor-Control Module
The MC9S08PA8VWJ fits small motor-control modules because it combines an HCS08L core with a dedicated motor-control FlexTimer, analog comparators, and an ADC. These resources can support timing, current or position sensing, and control-loop updates within one compact 20-pin package. The controller operates from 2.7 V to 5.5 V and includes flash, SRAM, and EEPROM for application code and retained parameters. Validate timing, noise immunity, thermal performance, and actuator drive circuitry for the specific motor.
מומלץ
Analog Sensor Interface
The MC9S08PA8VWJ can serve as the controller for a compact analog sensor interface because its integrated ADC and analog comparator reduce the need for external signal-conditioning components. The 8-bit CPU can perform thresholding, calibration, filtering, and digital reporting at up to 20 MHz, while 8 KB of SRAM supports temporary measurement data. Its 2.7 V minimum operating voltage offers flexibility for low-power sensor systems. Keep high-impedance analog traces short and use grounded guarding techniques where the sensor source impedance is high.
מומלץ
Low-Power Embedded Control
The MC9S08PA8VWJ works for low-power embedded controls that need deterministic interrupt handling, local EEPROM, and a compact set of analog and timing peripherals. The architecture supports up to 40 interrupt or reset sources and four levels of nested interrupts, allowing important events to be prioritized. Its 2.7 V to 5.5 V operating range supports energy-conscious 3.3 V systems, while the 20-pin SOIC package limits board area. Actual standby and active-current behavior should be evaluated against the product power budget.
מומלץ
Timing and Threshold Control
The MC9S08PA8VWJ is appropriate for products that combine timed events with analog threshold decisions. Its integrated timers, analog comparator, ADC, and interrupt structure can monitor inputs and coordinate control actions without external programmable logic. The 20 MHz maximum bus speed and four-level nested interrupt capability provide useful responsiveness for compact embedded tasks. Confirm timer clocking, input-tolerance limits, and interrupt priorities in the manufacturer datasheet, and include tests for startup, overload, and out-of-range sensor conditions.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MC9S08PA8VWJ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MC9S08PA8AMTG |
|---|---|---|
| Package | 20-pin SOIC | 20-pin SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors |
| CPU Core | 8-bit HCS08L | 8-bit HCS08L |
| Maximum Bus Frequency | 20 MHz | 20 MHz |
| Flash Memory | 8 KB | 8 KB |
| SRAM | 8 KB | 8 KB |
| Operating Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Operating Temperature Range | -40 °C to 105 °C | -40 °C to 105 °C |
| ADC | Integrated | Integrated |
| Analog Comparator | Integrated | Integrated |
| Motor Control Timer | Motor control FlexTimer | Motor control FlexTimer |
מבדילים עיקריים
- Integration reduces external analog and timing components (לעומתMC9S08PA8AMTG)
- 20 MHz performance with modest memory requirements (לעומתMC9S08PA8AMTG)
- Broad supply-voltage range (לעומתMC9S08PA8AMTG)
הערות תכנון
Follow the NXP recommended layout for bypass capacitors and route the ground return directly to the device ground pins. Place input capacitors close to the supply entry and output-capacitor requirements close to the relevant pins. Confirm the pin-one orientation and exposed package geometry against the exact ordering-code drawing before fabrication; the 20-pin footprint leaves little room for last-minute rerouting.
Keep analog comparator and ADC inputs away from switching edges, motor-drive nodes, and high-current return paths. Use a continuous ground reference beneath sensitive routes where board construction permits, and terminate unused inputs according to the datasheet guidance. Verify acquisition timing and source impedance with the intended sensor or divider because the 8-bit conversion result also depends on conditioning, reference stability, and firmware averaging.
Do not assume that parts sharing the MC9S08PA8 base designation have identical suffix attributes. Before substituting MC9S08PA8AMTG, compare the ordering-information entries for clock range, temperature grade, qualification, flash organization, SRAM, package dimensions, and pin multiplexing. Recheck reset, clock, debug, and programming requirements as well; a shared family name alone does not establish production interchangeability.
Budget the MCU supply across the full 2.7 V to 5.5 V operating range and include margin for connected sensors and I/O loads. Check absolute maximum ratings, operating voltage, and power-consumption tables in the manufacturer datasheet for the selected configuration. Use local decoupling to limit supply disturbance from timer switching and peripheral activity, and validate the rail during motor startup or other high-current events.
The -40 °C to 105 °C specification defines the operating range but does not mean the device dissipates its maximum power at every temperature. Use the package power data and application thermal information to evaluate the chosen PCB footprint. For compact enclosed products, confirm that copper area, airflow, and nearby heat sources keep the operating conditions within the manufacturer limits.
מידע על תאימות
The available manufacturer and distributor information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Request the current compliance and qualification documents for the exact ordering code.