NXP Semiconductors

MC9S08SL16CTL - 8-Bit 40MHz 16KB MCU | NXP

MPN: MC9S08SL16CTL ✗ انتهى عمره الإنتاجي
3.3 V or 5 V Vdss 28-pin TSSOP Package 40 MHz Speed 16 KB Memory
الحد الأدنى للطلب: 1 |

MC9S08SL16CTL نظرة عامة

The NXP MC9S08SL16CTL is an 8-bit S08 CISC microcontroller with a 40 MHz clock, 16 KB of flash memory, 512 bytes of RAM, and a 28-pin TSSOP package. It operates from 3.3 V or 5 V and is designed for cost-sensitive embedded systems requiring LIN connectivity, serial peripherals, and low-power operating modes.

An 8-bit microcontroller is a compact computing device that integrates a processor core, program memory, data memory, peripherals, and I/O into one package. The S08 microcontroller belongs to the embedded-controller hierarchy that includes embedded MCU, microprocessor, and semiconductor. This combination of processing, connectivity, and power management allows a single device to supervise motors, sensors, communications, and human-machine interfaces.

The MC9S08SL16CTL provides 16 KB of flash for program storage and 512 bytes of RAM for working data. Its S08 CISC architecture executes instructions at up to 40 MHz. Integrated communication capabilities include LIN, SPI, and I2C, reducing the number of external interface components required in a typical control board. The device also supports low-power modes for battery-powered embedded applications.

The 28-pin TSSOP package supports surface-mount assembly while exposing general-purpose I/O, communication interfaces, timer resources, reset, and clock functions. Operation at 3.3 V or 5 V allows design reuse across common industrial and consumer embedded platforms. The industrial temperature-grade designation and NRND lifecycle status require designers to confirm availability and product-change requirements before starting a long-term production design.

Typical applications include LIN-connected automotive accessories, industrial sensor nodes, small motor controllers, keypad interfaces, battery-powered instruments, and compact consumer appliances. The LIN interface is especially useful when communicating with automotive or industrial nodes over a single wired bus, while SPI and I2C permit connection to sensors, displays, and nonvolatile storage.

PCB design should place decoupling capacitors close to the supply pins and preserve the pin assignments specified by the manufacturer datasheet. Firmware developers should use the supported S08 development toolchain, validate clock and peripheral initialization against the device reference material, and account for NRND availability before committing to volume production.

This page combines product specifications, lifecycle information, package details, sourcing guidance, and a focused drop-in comparison. It is intended to help engineers evaluate the MC9S08SL16CTL against same-package S08-family devices while separating confirmed compatibility from options that would require schematic and firmware review.

بدائل مباشرة لـ MC9S08SL16CTL — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MC9S08SL16CTL (نفس عامل الشكل والبصمة).

MC9S08EL16CTL

✅ بديل مباشر
NXP Semiconductors
📦 28-pin TSSOP
8-bit HCS08 microcontroller · 40 MHz · 16 KB · 16K x 8 bits · 1 KB · 12 bits · Embedded Slave LIN Interface Controller (SLIC) · LCD driver

تواصل لمعرفة السعر

عرض ورقة البيانات ←

S9S08SG16E1CTLR

✅ بديل مباشر
📦 28-pin TSSOP
Same 28-pin TSSOP package and 16 KB memory class; clock and peripheral differences require datasheet review

📋 بديل مرجعي (غير موجود في الكتالوج)

MC9S08SL16CTL الحدود القصوى والخصائص الكهربائية

Microcontroller Type 8-bit S08 CISC microcontroller
أقصى تردد للساعة 40 MHz
Flash Memory 16 KB
Program Memory Organization 16K x 8 bits
RAM 512 bytes
EEPROM 512 bytes
جهد التغذية 3.3 V or 5 V
العلبة 28-pin TSSOP
Total Pins 28 pins
نوع التركيب Surface mount
Serial Interfaces LIN, SPI, and I2C
Processor Architecture S08 CISC core
Temperature Grade Industrial grade
Low-Power Modes Supported
Terminal Form Gull wing
Package Shape Rectangular
حالة دورة الحياة NRND
حالة RoHS unknown
REACH Status unknown

دليل تكوين أطراف MC9S08SL16CTL rectangular

تكوين الأطراف لـ MC9S08SL16CTL (حزمة rectangular). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة rectangular لـ MC9S08SL16CTL

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MC9S08SL16CTL.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MC9S08SL16CTL مناسب لـ 6 التطبيقs: LIN-Connected Automotive Control Node, Industrial Sensor Node, Small Motor and Actuator Controller, Battery-Powered Embedded Instrument, Human-Machine Interface Controller, Consumer Appliance Controller.

🚗

LIN-Connected Automotive Control Node

The MC9S08SL16CTL fits compact LIN nodes because its 16 KB flash and 512 bytes of RAM support event-driven control code, while the integrated LIN interface reduces the component count needed for bus communication. Operating at 3.3 V or 5 V supports common vehicle-electronics environments, and the 28-pin TSSOP package simplifies compact board layouts. The 40 MHz S08 core provides useful timing headroom for debouncing, diagnostics, and actuator supervision. Before finalizing a LIN design, validate the transceiver interface pins, timer dependencies, and wake-up behavior against the manufacturer datasheet. A LIN physical-layer transceiver remains external to the microcontroller, and PCB placement should keep the bus and transceiver circuitry away from sensitive sensor paths.

🏭

Industrial Sensor Node

The MC9S08SL16CTL is suitable for industrial sensor nodes that require local signal conditioning, periodic sampling, and network reporting. Its SPI and I2C interfaces can connect sensors, registers, and external nonvolatile memory, while the 16 KB program memory is sufficient for compact drivers and application logic. The 512 bytes of RAM supports small working buffers, and low-power modes can reduce consumption between measurements. The 28-pin TSSOP package is compatible with automated surface-mount assembly, although pin density requires careful fanout and inspection. For a robust node, use local decoupling, protected communication lines, and a watchdog strategy, then verify the device’s exact peripheral pin multiplexing and low-power timing in the manufacturer documentation.

⚡

Small Motor and Actuator Controller

The MC9S08SL16CTL can coordinate small motors, relays, solenoids, and position sensors when the design does not require a high-performance digital signal processor. Its 40 MHz S08 CISC core handles timer-based control, debouncing, fault counting, and communication tasks, while 16 KB of flash holds compact control firmware. General-purpose I/O and the 3.3 V or 5 V supply flexibility support a range of industrial and embedded control boards. The 28-pin TSSOP outline reduces board area compared with a larger leaded package. For inductive loads, keep switching current paths separate from sensitive logic and include suitable driver protection. Motor current, voltage transients, and pin-level drive limits must be checked against the load and the manufacturer electrical characteristics.

🔧

Battery-Powered Embedded Instrument

The MC9S08SL16CTL supports compact battery-powered instruments where low-power modes, a 3.3 V operating option, and integrated serial interfaces are valuable. The S08 core can alternate between sleep or low-power operation and active measurement routines, reducing unnecessary energy use in field instruments. Its 16 KB flash provides room for calibration, data logging, and user-interface logic, while the 512-byte RAM accommodates compact working sets. The 28-pin TSSOP package supports small, high-density circuit boards. Design the power tree around the manufacturer’s voltage and current limits, disable unused peripherals early in firmware, and account for wake-up latency and leakage when calculating battery life. Include a low-voltage detection strategy for safe behavior during supply decline.

🖥️

Human-Machine Interface Controller

The MC9S08SL16CTL can serve as the central controller for keypads, status LEDs, small displays, and menu-driven equipment. Its 16 KB flash is practical for compact interface state machines, while the 40 MHz clock supports responsive debouncing and event handling. SPI and I2C provide paths to external display or input devices, and the 28-pin TSSOP package leaves a compact footprint for crowded control panels. The industrial temperature grade supports industrial equipment requirements identified in the product listing. Firmware should use debounced inputs and bounded event processing to avoid blocking communications. PCB layout should separate display and switch connections from sensitive analog circuitry, and the pin multiplexing of every used peripheral should be confirmed from the manufacturer pin-description table.

📱

Consumer Appliance Controller

The MC9S08SL16CTL fits simple consumer appliances that combine local controls with serial sensors or a communications module. Its 16 KB flash and 512 bytes of RAM support compact appliance firmware, and the integrated LIN, SPI, and I2C interfaces provide flexibility for different peripheral ecosystems. The controller can operate at 3.3 V or 5 V, making it useful in systems with multiple regulated rails. The 28-pin TSSOP package supports compact surface-mount production. A practical implementation should provide local bulk and high-frequency bypass capacitance, protect externally accessible communication inputs, and define safe behavior when sensors fail. Validate reset behavior, watchdog use, and maximum pin transition rates before releasing the design for production.

What are the key specifications of MC9S08SL16CTL that engineers should know?
The MC9S08SL16CTL is an 8-bit S08 microcontroller operating at up to 40 MHz with 16 KB of flash, 512 bytes of RAM, and 512 bytes of EEPROM. It uses a 28-pin TSSOP package and supports 3.3 V or 5 V operation. According to the NXP product page, the device also provides LIN, SPI, and I2C interfaces, low-power modes, and an industrial temperature grade.
What is the operating voltage of MC9S08SL16CTL?
The MC9S08SL16CTL supports a 3.3 V or 5 V supply. According to the NXP product information and distributor technical listings, this dual-voltage capability allows the same controller family to serve conventional 5 V industrial electronics and 3.3 V low-power embedded systems. Designers should still observe the exact pin-level voltage limits and decoupling requirements in the manufacturer datasheet.
How much flash and RAM does MC9S08SL16CTL contain?
The MC9S08SL16CTL contains 16 KB of flash organized as 16K x 8 bits and 512 bytes of RAM. It also includes 512 bytes of EEPROM according to the NXP product page. The flash provides fixed-program storage, while the RAM supports stack, variables, and working buffers during firmware execution.
What peripherals and communication interfaces are available on MC9S08SL16CTL?
The MC9S08SL16CTL includes LIN, SPI, and I2C serial interfaces. According to the NXP product information, these interfaces support embedded control, sensing, and communications designs without requiring separate protocol controllers. The device also includes general-purpose I/O and timer resources, making it suitable for compact sensor, keypad, actuator, and bus-node designs.
Where can I download the MC9S08SL16CTL datasheet PDF?
The official MC9S08SL16CTL datasheet is accessible through the NXP product page linked on this page. The manufacturer page provides the Data Sheet and product-change information for the 8-bit S08 device. Use the manufacturer document for authoritative pin assignments, electrical limits, memory maps, clock requirements, and programming guidance.
Where can I find the MC9S08SL16CTL pinout?
The MC9S08SL16CTL pinout is defined in the pin-description section of the manufacturer datasheet for the 28-pin TSSOP package. Use that table when assigning PCB nets, programming the pin mux, and checking peripheral functions. The package drawing on this page identifies the physical 28-pin TSSOP outline, while the manufacturer document remains the controlling source for every pin name and alternate function.
Where to buy MC9S08SL16CTL online?
Use the Request a Quote form on this page to request MC9S08SL16CTL availability, sourcing, and current commercial terms. Because NXP identifies the device as NRND, include the required production quantity, target date, and approved-source status in the request. The manufacturer product page and listed distribution channels can also be used to confirm the product-change position.
What is the price of MC9S08SL16CTL?
Current pricing for MC9S08SL16CTL depends on order quantity, condition, and market availability. Submit a request through the Request a Quote form on this page for a unit-price quotation and volume breaks. Because the device is marked NRND, a written quotation should also address available inventory, lifecycle risk, and any manufacturer product-change notice affecting future orders.
What is the lead time for MC9S08SL16CTL?
Lead time for MC9S08SL16CTL must be confirmed for the requested quantity and shipment date. Use the Request a Quote form on this page and specify the annual and initial demand, production schedule, and acceptable delivery date. NRND status makes quantity confirmation particularly important for designs that must remain in production for an extended period.
Is MC9S08SL16CTL in stock?
Stock for MC9S08SL16CTL is not represented by a fixed quantity on this page. Use the Request a Quote form to request current availability and a delivery commitment for the exact MPN and package. Because NXP lists the microcontroller as NRND, confirm stock against the quotation response rather than assuming future supply will remain unchanged.
What is the best drop-in replacement for MC9S08SL16CTL?
MC9S08EL16CTL is the closest documented same-package candidate because it also uses the 28-pin TSSOP format and retains the 16 KB MCU class. However, a true drop-in decision must also confirm pin assignments, clocking, memory, peripheral coverage, voltage limits, and firmware compatibility. The manufacturer datasheets for both devices should be compared before replacing an existing MC9S08SL16CTL without PCB changes.
Can MC9S08EL16CTL replace MC9S08SL16CTL without changing the PCB?
MC9S08EL16CTL can be evaluated as a same-package replacement because both devices use a 28-pin TSSOP package, but package equality alone does not prove drop-in compatibility. According to NXP product information, the target provides 16 KB of flash, 512 bytes of RAM, LIN, SPI, I2C, and low-power modes. Verify whether the EL16 device matches every used pin, peripheral, interrupt, timing, and programming feature.
MC9S08SL16CTL vs MC9S08EL16CTL - which is better for a LIN controller?
Choose MC9S08EL16CTL only after confirming that its LIN implementation, transceiver interface pins, timing, and memory behavior satisfy the design. The target MC9S08SL16CTL is explicitly listed with 16 KB of flash, 512 bytes of RAM, 512 bytes of EEPROM, LIN, SPI, I2C, and a 28-pin TSSOP package. For a new LIN design, the NXP device comparison should determine which option preserves the required peripheral set.
When should I choose MC9S08SL16CTL over MC9S08EL16CTL?
Choose MC9S08SL16CTL when an existing design has already validated its 16 KB flash, 512-byte RAM, 512-byte EEPROM, LIN, SPI, I2C, and 28-pin TSSOP implementation. Its operating frequency is 40 MHz according to the manufacturer listing. Choose the EL16 candidate only when its datasheet confirms equal or better requirements and the complete pin and firmware compatibility review succeeds.
Is there a cross-brand drop-in equivalent for MC9S08SL16CTL?
No cross-brand drop-in equivalent is established for MC9S08SL16CTL. An S08-compatible controller can differ in pin multiplexing, interrupt mapping, memory organization, clock architecture, bootloader behavior, and development-tool support even when it uses a 28-pin package. Treat another manufacturer’s device as a redesign candidate unless its documentation explicitly confirms every mechanical, electrical, and software requirement.

بيانات مرجعية هندسية لـ MC9S08SL16CTL — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MC9S08SL16CTL when the design specifically requires a 40 MHz 8-bit S08 controller with 16 KB flash, 512 bytes of RAM, 512 bytes of EEPROM, LIN, SPI, and I2C interfaces in a 28-pin TSSOP package. It is appropriate for compact LIN nodes, industrial sensing, appliance control, and small embedded instruments, although its NRND status requires lifecycle planning. Consider MC9S08EL16CTL when its manufacturer documentation confirms equal pin, electrical, peripheral, and software compatibility; its similar package and 16 KB memory class make it the closer same-package alternative. Consider S9S08SG16E1CTLR only after reviewing clock, memory, peripheral, and development-tool differences. No cross-brand replacement is established because S08-specific pin mapping and firmware behavior prevent a safe universal drop-in claim. For every substitution, compare the complete manufacturer pinout, electrical characteristics, memory map, and toolchain requirements.

المقارنة مع البدائل

المعامل هذا المنتج MC9S08EL16CTL S9S08SG16E1CTLR
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Flash Memory 16 KB 16 KB class 16 KB class

أبرز الفروقات

  • 40 MHz S08 core with dedicated LIN support (مقابلMC9S08EL16CTL)
  • Complete mixed interface integration (مقابلS9S08SG16E1CTLR)
  • Documented memory configuration (مقابلMC9S08EL16CTL)

ملاحظات التصميم

Place the required bulk and high-frequency decoupling capacitors directly beside the MC9S08SL16CTL supply and ground pins. Keep the return path short and use an uninterrupted ground plane where practical. Because the device uses a 28-pin TSSOP with relatively fine lead pitch, inspect assembly joints for bridging and verify pin-one orientation against both the package marking and PCB land pattern before the first production build.

Use the manufacturer pin-description table to assign every MCU signal before laying out the PCB. The 28-pin TSSOP offers limited row spacing, so route SPI, I2C, LIN-adjacent control signals, timers, and programming signals in a deliberate order that avoids long parallel runs. Check pull resistors, oscillator components, reset circuitry, and debug-access requirements against the reference design in the manufacturer documentation.

Design the supply path for both 3.3 V and 5 V implementations without assuming that every peripheral has the same allowable voltage. The manufacturer lists 3.3 V or 5 V operation for the MCU, but connected sensors, transceivers, and pull-up networks must also tolerate the selected rail. Include controlled power sequencing where peripheral back-powering could occur, and use the electrical-characteristics table to set current and voltage limits.

Do not treat the same package and similar flash capacity as proof that an alternate S08 device is a drop-in replacement. Confirm package dimensions, pin names, alternate-function multiplexing, interrupt vectors, timer resources, serial interfaces, reset behavior, clock architecture, and development-tool compatibility. After replacing MC9S08SL16CTL, rebuild the project with the alternate device’s headers and recalculate timing, watchdog, and communication assumptions.

The MC9S08SL16CTL is a digital microcontroller and does not require a safe-operating-area chart. Thermal design should focus on the actual package dissipation, copper area, ambient temperature, and nearby heat sources rather than a power-semiconductor SOA curve. Keep voltage regulators and high-current switching stages physically separated from the MCU and provide adequate copper around the TSSOP lands when the board experiences elevated ambient temperatures.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The product is listed as industrial temperature grade and NRND. Specific environmental and material-compliance declarations are not stated in the product information.

تم التحقق من البيانات في: 2026-11-20 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MC9S08SL16CTL MC9S08SL16CTL datasheet MC9S08SL16CTL datasheet pdf MC9S08SL16CTL pinout MC9S08SL16CTL pinout 28 TSSOP MC9S08SL16CTL specifications MC9S08SL16CTL 40MHz 16KB NXP MC9S08SL16CTL MC9S08SL16CTL equivalent MC9S08SL16CTL replacement MC9S08SL16CTL vs MC9S08EL16CTL MC9S08SL16CTL LIN controller

المكونات والمصطلحات ذات الصلة

NXP Semiconductors MC9S08SL16CTL MC9S08EL16CTL S9S08SG16E1CTLR S08 microcontroller 8-bit microcontroller embedded MCU microprocessor semiconductor S08 CISC core LIN SPI I2C flash memory EEPROM RAM low-power mode industrial temperature grade 28-pin TSSOP TSSOP package family surface mount SMD battery-powered embedded applications industrial sensor nodes NRND lifecycle status
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر