MC9S08SL16CTL - 8-Bit 40MHz 16KB MCU | NXP
N.º de pieza: MC9S08SL16CTL ✗ Fin de vidaMC9S08SL16CTL Descripción general
An 8-bit microcontroller is a compact computing device that integrates a processor core, program memory, data memory, peripherals, and I/O into one package. The S08 microcontroller belongs to the embedded-controller hierarchy that includes embedded MCU, microprocessor, and semiconductor. This combination of processing, connectivity, and power management allows a single device to supervise motors, sensors, communications, and human-machine interfaces.
The MC9S08SL16CTL provides 16 KB of flash for program storage and 512 bytes of RAM for working data. Its S08 CISC architecture executes instructions at up to 40 MHz. Integrated communication capabilities include LIN, SPI, and I2C, reducing the number of external interface components required in a typical control board. The device also supports low-power modes for battery-powered embedded applications.
The 28-pin TSSOP package supports surface-mount assembly while exposing general-purpose I/O, communication interfaces, timer resources, reset, and clock functions. Operation at 3.3 V or 5 V allows design reuse across common industrial and consumer embedded platforms. The industrial temperature-grade designation and NRND lifecycle status require designers to confirm availability and product-change requirements before starting a long-term production design.
Typical applications include LIN-connected automotive accessories, industrial sensor nodes, small motor controllers, keypad interfaces, battery-powered instruments, and compact consumer appliances. The LIN interface is especially useful when communicating with automotive or industrial nodes over a single wired bus, while SPI and I2C permit connection to sensors, displays, and nonvolatile storage.
PCB design should place decoupling capacitors close to the supply pins and preserve the pin assignments specified by the manufacturer datasheet. Firmware developers should use the supported S08 development toolchain, validate clock and peripheral initialization against the device reference material, and account for NRND availability before committing to volume production.
This page combines product specifications, lifecycle information, package details, sourcing guidance, and a focused drop-in comparison. It is intended to help engineers evaluate the MC9S08SL16CTL against same-package S08-family devices while separating confirmed compatibility from options that would require schematic and firmware review.
Alternativas directas para MC9S08SL16CTL — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MC9S08SL16CTL (mismo factor de forma y huella).
MC9S08EL16CTL
✅ Sustitución directaConsulte el precio
Ver hoja de datos →S9S08SG16E1CTLR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MC9S08SL16CTL Valores máximos y características eléctricas
| Microcontroller Type | 8-bit S08 CISC microcontroller |
| Frecuencia de reloj máxima | 40 MHz |
| Flash Memory | 16 KB |
| Program Memory Organization | 16K x 8 bits |
| RAM | 512 bytes |
| EEPROM | 512 bytes |
| Tensión de alimentación | 3.3 V or 5 V |
| Encapsulado | 28-pin TSSOP |
| Total Pins | 28 pins |
| Tipo de montaje | Surface mount |
| Serial Interfaces | LIN, SPI, and I2C |
| Processor Architecture | S08 CISC core |
| Temperature Grade | Industrial grade |
| Low-Power Modes | Supported |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Estado del ciclo de vida | NRND |
| Estado RoHS | unknown |
| REACH Status | unknown |
Guía de configuración de pines de MC9S08SL16CTL rectangular
Configuración de pines para MC9S08SL16CTL (encapsulado rectangular). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MC9S08SL16CTL.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MC9S08SL16CTL es adecuado para 6 aplicacións: LIN-Connected Automotive Control Node, Industrial Sensor Node, Small Motor and Actuator Controller, Battery-Powered Embedded Instrument, Human-Machine Interface Controller, Consumer Appliance Controller.
LIN-Connected Automotive Control Node
The MC9S08SL16CTL fits compact LIN nodes because its 16 KB flash and 512 bytes of RAM support event-driven control code, while the integrated LIN interface reduces the component count needed for bus communication. Operating at 3.3 V or 5 V supports common vehicle-electronics environments, and the 28-pin TSSOP package simplifies compact board layouts. The 40 MHz S08 core provides useful timing headroom for debouncing, diagnostics, and actuator supervision. Before finalizing a LIN design, validate the transceiver interface pins, timer dependencies, and wake-up behavior against the manufacturer datasheet. A LIN physical-layer transceiver remains external to the microcontroller, and PCB placement should keep the bus and transceiver circuitry away from sensitive sensor paths.
Recomendado
Industrial Sensor Node
The MC9S08SL16CTL is suitable for industrial sensor nodes that require local signal conditioning, periodic sampling, and network reporting. Its SPI and I2C interfaces can connect sensors, registers, and external nonvolatile memory, while the 16 KB program memory is sufficient for compact drivers and application logic. The 512 bytes of RAM supports small working buffers, and low-power modes can reduce consumption between measurements. The 28-pin TSSOP package is compatible with automated surface-mount assembly, although pin density requires careful fanout and inspection. For a robust node, use local decoupling, protected communication lines, and a watchdog strategy, then verify the device’s exact peripheral pin multiplexing and low-power timing in the manufacturer documentation.
Recomendado
Small Motor and Actuator Controller
The MC9S08SL16CTL can coordinate small motors, relays, solenoids, and position sensors when the design does not require a high-performance digital signal processor. Its 40 MHz S08 CISC core handles timer-based control, debouncing, fault counting, and communication tasks, while 16 KB of flash holds compact control firmware. General-purpose I/O and the 3.3 V or 5 V supply flexibility support a range of industrial and embedded control boards. The 28-pin TSSOP outline reduces board area compared with a larger leaded package. For inductive loads, keep switching current paths separate from sensitive logic and include suitable driver protection. Motor current, voltage transients, and pin-level drive limits must be checked against the load and the manufacturer electrical characteristics.
Recomendado
Battery-Powered Embedded Instrument
The MC9S08SL16CTL supports compact battery-powered instruments where low-power modes, a 3.3 V operating option, and integrated serial interfaces are valuable. The S08 core can alternate between sleep or low-power operation and active measurement routines, reducing unnecessary energy use in field instruments. Its 16 KB flash provides room for calibration, data logging, and user-interface logic, while the 512-byte RAM accommodates compact working sets. The 28-pin TSSOP package supports small, high-density circuit boards. Design the power tree around the manufacturer’s voltage and current limits, disable unused peripherals early in firmware, and account for wake-up latency and leakage when calculating battery life. Include a low-voltage detection strategy for safe behavior during supply decline.
Recomendado
Human-Machine Interface Controller
The MC9S08SL16CTL can serve as the central controller for keypads, status LEDs, small displays, and menu-driven equipment. Its 16 KB flash is practical for compact interface state machines, while the 40 MHz clock supports responsive debouncing and event handling. SPI and I2C provide paths to external display or input devices, and the 28-pin TSSOP package leaves a compact footprint for crowded control panels. The industrial temperature grade supports industrial equipment requirements identified in the product listing. Firmware should use debounced inputs and bounded event processing to avoid blocking communications. PCB layout should separate display and switch connections from sensitive analog circuitry, and the pin multiplexing of every used peripheral should be confirmed from the manufacturer pin-description table.
Recomendado
Consumer Appliance Controller
The MC9S08SL16CTL fits simple consumer appliances that combine local controls with serial sensors or a communications module. Its 16 KB flash and 512 bytes of RAM support compact appliance firmware, and the integrated LIN, SPI, and I2C interfaces provide flexibility for different peripheral ecosystems. The controller can operate at 3.3 V or 5 V, making it useful in systems with multiple regulated rails. The 28-pin TSSOP package supports compact surface-mount production. A practical implementation should provide local bulk and high-frequency bypass capacitance, protect externally accessible communication inputs, and define safe behavior when sensors fail. Validate reset behavior, watchdog use, and maximum pin transition rates before releasing the design for production.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MC9S08SL16CTL — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MC9S08EL16CTL | S9S08SG16E1CTLR |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 28-pin TSSOP | 28-pin TSSOP | 28-pin TSSOP |
| Flash Memory | 16 KB | 16 KB class | 16 KB class |
Diferenciadores clave
- 40 MHz S08 core with dedicated LIN support (frente a MC9S08EL16CTL)
- Complete mixed interface integration (frente a S9S08SG16E1CTLR)
- Documented memory configuration (frente a MC9S08EL16CTL)
Notas de diseño
Place the required bulk and high-frequency decoupling capacitors directly beside the MC9S08SL16CTL supply and ground pins. Keep the return path short and use an uninterrupted ground plane where practical. Because the device uses a 28-pin TSSOP with relatively fine lead pitch, inspect assembly joints for bridging and verify pin-one orientation against both the package marking and PCB land pattern before the first production build.
Use the manufacturer pin-description table to assign every MCU signal before laying out the PCB. The 28-pin TSSOP offers limited row spacing, so route SPI, I2C, LIN-adjacent control signals, timers, and programming signals in a deliberate order that avoids long parallel runs. Check pull resistors, oscillator components, reset circuitry, and debug-access requirements against the reference design in the manufacturer documentation.
Design the supply path for both 3.3 V and 5 V implementations without assuming that every peripheral has the same allowable voltage. The manufacturer lists 3.3 V or 5 V operation for the MCU, but connected sensors, transceivers, and pull-up networks must also tolerate the selected rail. Include controlled power sequencing where peripheral back-powering could occur, and use the electrical-characteristics table to set current and voltage limits.
Do not treat the same package and similar flash capacity as proof that an alternate S08 device is a drop-in replacement. Confirm package dimensions, pin names, alternate-function multiplexing, interrupt vectors, timer resources, serial interfaces, reset behavior, clock architecture, and development-tool compatibility. After replacing MC9S08SL16CTL, rebuild the project with the alternate device’s headers and recalculate timing, watchdog, and communication assumptions.
The MC9S08SL16CTL is a digital microcontroller and does not require a safe-operating-area chart. Thermal design should focus on the actual package dissipation, copper area, ambient temperature, and nearby heat sources rather than a power-semiconductor SOA curve. Keep voltage regulators and high-current switching stages physically separated from the MCU and provide adequate copper around the TSSOP lands when the board experiences elevated ambient temperatures.
Información de cumplimiento
The product is listed as industrial temperature grade and NRND. Specific environmental and material-compliance declarations are not stated in the product information.