MCIMX353DVM5B - i.MX35 ARM1136JF-S MPU 532MHz | MAPBGA-400
MPN: MCIMX353DVM5B ⚠ آخر فرصة للشراءMCIMX353DVM5B نظرة عامة
An ARM11-based microprocessor (MPU) is a 32-bit RISC applications processor that executes an ARM instruction set, runs an operating system such as Linux or Windows Embedded, and provides hardware peripherals including memory controllers, display interfaces, and connectivity blocks. The i.MX35 sits in the system hierarchy as MPU -> applications processor -> microcontroller -> semiconductor; ARM11 represents an early generation of superscalar ARM cores bridging ARM9 and Cortex-A series. The MCIMX353DVM5B is the specific speed grade and feature subset within the broader i.MX35 family.
Key features include a 532 MHz ARM1136JF-S core with Jazelle Java acceleration, 96 general-purpose I/O lines, a 128 KB SRAM internal memory footprint, and integrated multimedia blocks for camera, LCD, and video processing. The external oscillator interface supports a wide range of system clocking topologies. The 400-ball MAPBGA package at 0.8 mm pitch supports fine-line PCB manufacturing and provides sufficient I/O density for LPDDR, NAND flash, and parallel display buses. Operating temperature is rated for industrial-grade deployments.
The MCIMX353DVM5B uses an ARM1136JF-S superscalar pipeline with separate I/D caches, MMU support for full operating systems (Linux, WinCE), and integrated peripherals including an LCD controller, CMOS sensor interface, USB 2.0 with PHY, and three MMC/SD ports. The device targets industrial-grade reliability with extended temperature support and long-life-cycle supply typical of NXP's i.MX application processor line.
Typical applications include industrial HMI panels, automotive infotainment prototypes, medical patient monitors, point-of-sale terminals, factory automation controllers, and connected IP cameras. The combination of ARM11 performance with integrated multimedia peripherals enables compact single-board designs without external co-processors.
When designing with the MCIMX353DVM5B, ensure the PCB supports all 400 balls of the MAPBGA and that DDR memory routing follows length-matched guidelines. A multi-layer PCB with dedicated ground planes is recommended because the device has mixed-signal analog blocks sensitive to power-rail noise.
This page synthesizes distributor pricing, parametric alternatives, BGA package details, and design notes not collocated on the manufacturer datasheet to support embedded engineers selecting a 532 MHz ARM11 applications processor.
بدائل مباشرة لـ MCIMX353DVM5B — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MCIMX353DVM5B (نفس عامل الشكل والبصمة) — يختلف في Core Architecture, Program Memory Type, Manufacturer.
MCIMX353CVM5B
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MCIMX357CJQ5C
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MCIMX353DVM5B الحدود القصوى والخصائص الكهربائية
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | i.MX35 |
| Core Processor | ARM1136JF-S |
| Core Architecture | ARM11 (32-bit RISC) |
| أقصى تردد للساعة | 532 MHz |
| Number of Cores | 1 |
| Internal SRAM | 128 KB |
| Program Memory Type | ROMless (external memory required) |
| Number of I/O | 96 |
| العلبة | 400-LFBGA (MAPBGA), 17x17 mm, 0.8 mm pitch |
| نوع التركيب | Surface Mount |
| Oscillator Type | External |
| Packaging | Tray |
| حالة RoHS | Compliant (per distributor listing) |
دليل تكوين أطراف MCIMX353DVM5B 400-lfbga (mapbga), 17x17 mm, 0.8 mm pitch
تكوين الأطراف لـ MCIMX353DVM5B (حزمة 400-lfbga (mapbga), 17x17 mm, 0.8 mm pitch). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MCIMX353DVM5B.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MCIMX353DVM5B مناسب لـ 6 التطبيقs: Industrial Human-Machine Interface (HMI) Panels, Automotive Infotainment Prototypes, Medical Patient Monitoring Displays, Point-of-Sale (POS) Terminals, Factory Automation Controllers, Connected IP Cameras and Surveillance.
Industrial Human-Machine Interface (HMI) Panels
The NXP MCIMX353DVM5B fits industrial HMI panels because its ARM1136JF-S core at 532 MHz provides enough throughput to render graphical user interfaces on integrated LCD controllers while managing serial fieldbus or Ethernet connectivity to PLCs. The i.MX35 family integrates an LCD controller, CMOS sensor interface, and USB 2.0 with PHY, eliminating the need for separate graphics or connectivity co-processors. Compared to lower-MHz ARM9 parts, the 532 MHz ARM11 core delivers 1.5-2x the rendering performance, supporting smoother touch response on operator panels. Power consumption stays within industrial thermal budgets when clock-gating unused peripherals.
موصى به
Automotive Infotainment Prototypes
The MCIMX353DVM5B suits automotive infotainment prototypes because the i.MX35 platform integrates display, audio, and connectivity peripherals required for head-unit demo systems. Operating temperatures extend to industrial-grade ranges typically sufficient for cabin-mounted prototypes. Compared with external processor + companion chip designs, a single i.MX35 MPU reduces PCB area and BOM cost, accelerating prototype iteration. However, for production automotive deployment consult NXP's automotive-qualified i.MX variants rather than the standard MCIMX353DVM5B commercial/industrial grade.
موصى به
Medical Patient Monitoring Displays
The MCIMX353DVM5B is suitable for medical patient monitoring display systems requiring a deterministic 32-bit processor with industrial temperature tolerance and reliability. The integrated LCD controller drives bedside monitor panels directly; USB 2.0 supports connectivity to bedside sensors and nurse-call systems. The ARM1136JF-S core executes real-time waveform rendering at sufficient frames-per-second for vitals display, while ROMless boot enables secure firmware loading for medical-device certification pathways. Long-life-cycle supply typical of NXP i.MX parts eases regulatory re-submission cycles.
موصى به
Point-of-Sale (POS) Terminals
The NXP MCIMX353DVM5B fits point-of-sale terminals because the integrated ARM11 core at 532 MHz handles payment-application stacks, customer-facing display rendering, and receipt-printer coordination from a single chip. The 96 GPIO count accommodates barcode scanner, magnetic-stripe reader, and cash-drawer interfaces without external I/O expanders. Compared to discrete microcontroller + external graphics approaches, the i.MX35 reduces total part count and supports Linux-based payment frameworks out of the box.
موصى به
Factory Automation Controllers
The MCIMX353DVM5B fits factory automation controllers because the i.MX35 platform combines an ARM1136JF-S core running Linux with industrial peripheral mix including Ethernet, USB, and serial interfaces. Determinism is achieved by running control loops on the dedicated hardware timers while Linux handles HMI and networking. Compared with MCU-only designs, the MPU class compute supports OPC-UA, MQTT, and on-device analytics workloads typical of Industry-4.0 retrofit controllers. The 400-MAPBGA package supports dense multi-layer PCB layouts common in DIN-rail-mounted controllers.
موصى به
Connected IP Cameras and Surveillance
The MCIMX353DVM5B suits connected IP cameras because the integrated CMOS sensor interface accepts direct camera input, while the 532 MHz ARM11 core runs on-device video encoding (H.264 baseline) without external DSP. The integrated Ethernet MAC and USB 2.0 provide network and storage connectivity; the industrial temperature range supports outdoor deployments. Compared with separate sensor-processor designs, the i.MX35 reduces BOM and accelerates time-to-market for surveillance OEMs. Caveat: end-of-life status requires lifetime-buy planning for new surveillance product launches.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MCIMX353DVM5B — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MCIMX353CVM5B | MCIMX357CJQ5C |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 400-LFBGA (MAPBGA) 17x17 mm | 400-LFBGA (MAPBGA) - same family, verify pin-by-pin | 400-MAPBGA - same family, verify pin-by-pin |
| Core | ARM1136JF-S | ARM1136JF-S | ARM1136JF-S (i.MX357 variant) |
| Program Memory Type | ROMless | ROMless | ROMless |
| Lifecycle Status | End of Life (NXP PCN issued) | End of Life (same family) | Likely EOL (same product family) |
أبرز الفروقات
- Highest published speed grade in the MCIMX353 family (مقابلMCIMX353CVM5B)
- Greater multimedia integration vs base i.MX353 (مقابلMCIMX357CJQ5C)
- Mature NXP/Freescale documentation and Linux BSP support (مقابلGeneric ARM11 MPUs)
ملاحظات التصميم
The 400-MAPBGA package dissipates significant heat in continuous-load industrial workloads. Estimated: at Vcore=1.4V and 532 MHz CPU utilization near 70%, power dissipation is approximately 1.0-1.5W depending on peripheral activity. Apply a multi-layer PCB with at least 4 dedicated ground/power planes and a thermal via array under the exposed pad region to keep junction temperature below 100C in industrial environments. Avoid placing the MPU directly above heat-generating power components.
The 0.8 mm ball pitch MAPBGA requires PCB fabrication with microvia (laser-drilled) technology, stacked vias, or via-in-pad constructions to fan out the 400 balls to escape routes. Use a 6-layer stack-up with a dedicated ground plane and a 1.2-1.6 mm BGA escape region. Decoupling requires 100nF X7R capacitors placed within 2 mm of each power-supply ball group, plus bulk 10uF tantalum or ceramic caps adjacent to the MPU.
Because the MCIMX353DVM5B is NXP EOL, do not begin a new product design without a written longevity commitment from NXP or an authorized distributor. Maintain a lifetime-buy inventory strategy: secure 2-3x annual deployment volume plus a 12-month safety margin at end-of-life announcement. Always validate boot-mode pin strapping against the i.MX35 reference manual before PCB tape-out because MPU boot configuration is non-recoverable after assembly.
معلومات الامتثال
RoHS compliance confirmed by distributor listings (DigiKey, Mouser, LCSC). REACH status inferred from NXP corporate compliance program. AEC-Q100 not applicable - this is a commercial/industrial grade MPU; for automotive deployment use NXP's automotive-qualified i.MX variants. End-of-life status per NXP product page PCN/Discontinuance notice.
