MCP3302-BI/SL - 13-Bit 2-Channel SAR ADC | Microchip
MPN: MCP3302-BI/SL ✓ نشطMCP3302-BI/SL نظرة عامة
An ADC converts an analog voltage into a numeric value for processing, measurement, logging, or control. The MCP3302 belongs to the successive-approximation-register, or SAR, ADC family. Its SAR architecture compares the input against an internal DAC through successive conversion steps, providing predictable sampling behavior suitable for instrumentation and embedded data-acquisition systems.
The MCP3302-BI/SL provides 13-bit resolution, two differential or four single-ended input choices, and one SAR converter. Its SPI interface supports connection to microcontrollers and other digital controllers. Full differential inputs are especially useful when the measured source sits around a nonzero reference voltage or when ground offsets and coupled noise could affect single-ended measurements.
The device is aimed at battery-powered systems and remote data-acquisition equipment, according to the manufacturer product page. Its low-power operating approach helps limit energy use in portable instruments, while the 14-pin SOIC package supports conventional surface-mount assembly. The BI ordering code and SL package code identify the exact commercial variant represented by MCP3302-BI/SL.
Typical uses include battery monitors, current and voltage measurements, temperature sensing, industrial process measurement, portable instrumentation, and remote sensor acquisition. Differential pairing is useful for ratiometric sensor measurements, bridge outputs, and amplified sensor signals where rejecting common-mode disturbance is important. The SPI interface also allows the ADC to be shared with other compatible peripherals on a controller bus.
Design the reference, analog input, and digital interfaces carefully. Keep analog and return paths short, provide stable reference bypassing, and use an appropriate common-mode range and source impedance for the selected channel configuration. Confirm conversion timing, input capacitance, and operating limits against the manufacturer datasheet before establishing system timing or scaling sensor output.
This product page combines the manufacturer product description with verified distributor identification, packaging information, application guidance, and drop-in alternatives. It is intended to help engineers evaluate ADC architecture, pin compatibility, interface requirements, and design constraints before embedding the MCP3302-BI/SL in a PCB design.
بدائل مباشرة لـ MCP3302-BI/SL — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
MCP3302-I/SL
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MCP3302-SI/LL
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MCP3302-TI/LL
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MCP3302-BI/SL الحدود القصوى والخصائص الكهربائية
| ADC Resolution | 13 bit |
| Differential Input Channels | 2 channels |
| Single-Ended Input Channels | 4 channels |
| Conversion Architecture | 1 SAR converter |
| Input Type | Fully differential |
| Digital Interface | SPI serial interface |
| العلبة | 14-pin SOIC |
| نوع التركيب | Surface mount |
| Power Consumption | Low power |
دليل تكوين أطراف MCP3302-BI/SL 14-pin soic
تكوين الأطراف لـ MCP3302-BI/SL (حزمة 14-pin soic). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MCP3302-BI/SL.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MCP3302-BI/SL مناسب لـ 6 التطبيقs: Battery-Powered Voltage Measurement, Industrial Sensor Acquisition, Temperature Sensing Front End, Remote Environmental Monitoring, Portable Current Measurement, Portable Data-Acquisition Instrument.
Battery-Powered Voltage Measurement
The MCP3302-BI/SL fits portable voltage-measurement systems because it combines a 13-bit SAR ADC, two differential inputs or four single-ended inputs, and low-power operation in a 14-pin SOIC package. The converter can digitize a divided battery or supply voltage for display, threshold evaluation, or energy-management control through its SPI interface. Differential measurement is useful when the signal is referenced to another battery rail or sensor output, helping reject shared disturbances that would affect a single-ended reading. The designer should establish the input range, source impedance, sample rate, and reference arrangement from the manufacturer datasheet. A low-noise local reference, short analog traces, and a return path adjacent to the measurement signal help preserve accuracy. The SPI controller must also honor the converter's command and result timing, particularly when multiple measurements are coordinated with other acquisition channels.
Industrial Sensor Acquisition
The MCP3302-BI/SL is suitable for industrial sensor acquisition when the design needs 13-bit resolution, differential input handling, and a compact 14-pin SOIC footprint. Two differential channels can monitor outputs from bridge sensors, instrumentation amplifiers, or current-sense circuits, while four single-ended inputs expand measurement capacity when fully differential operation is unnecessary. Differential pairing is valuable when sensor outputs sit around a nonzero common-mode voltage or when the wiring introduces ground-offset errors. The SPI interface allows a microcontroller to configure conversions and retrieve results without requiring a parallel bus. Before finalizing the design, verify signal range, common-mode limits, acquisition time, and input capacitance against the manufacturer datasheet. Place protection networks close to the connector, maintain a continuous return path, and keep digital clock activity away from sensitive analog nodes to prevent conversion errors.
Temperature Sensing Front End
The MCP3302-BI/SL can digitize resistive temperature-sensor outputs in compact instrumentation because its SAR architecture provides 13-bit resolution and accepts either two differential or four single-ended input configurations. A differential connection can monitor a bridge or ratiometric sensor referenced to a stable excitation, while a single-ended channel can serve a buffered thermistor or temperature-to-voltage amplifier output. The same SPI interface used for initiating conversions also supports deterministic sensor sampling in a microcontroller-based controller. For accurate results, use the sensor's specified excitation and resistance limits, account for the ADC input network, and select a reference strategy that remains stable over the required measurement temperature range. Check the conversion timing and input settling requirements in the manufacturer datasheet. Place the sensing network away from heat sources and switching components when the enclosure allows, and verify calibration results across the full operating range.
Remote Environmental Monitoring
The MCP3302-BI/SL suits remote environmental monitoring nodes that need low-power operation, two differential measurement channels, and a compact serial-interface ADC. It can digitize inputs from external temperature, humidity, pressure, or gas sensors when their analog outputs are scaled to the converter's allowable range. Two differential channels permit measurement of paired sensor signals or a sensor plus reference channel, while four single-ended inputs can support a mixed acquisition plan. The 13-bit conversion result is suitable for many slow environmental measurements where long-term stability and low system power are more important than high-speed sampling. Designers should confirm the input range and conversion rate for the selected sensor bandwidth, then apply calibration and digital filtering as appropriate. A stable reference, local bypass capacitance, controlled return routing, and a protected enclosure connection help preserve measurement repeatability across remote installations.
Portable Current Measurement
The MCP3302-BI/SL can acquire current-sense information in portable power tools, battery instruments, and compact energy monitors. Its two differential channels are suited to monitoring the voltage output of a current-sense amplifier without tying the measurement directly to ground, while its 13-bit resolution provides a useful balance between measurement resolution and conversion complexity for many power and system-monitoring tasks. The SPI interface allows a controller to sample current information during energy accounting, protection decisions, or operating-state display. The input network should be designed around the sense-amplifier output range, and the designer must verify input common-mode limits and source impedance from the manufacturer datasheet. Place the sense amplifier close to the ADC when practical, maintain a low-impedance reference, and route the differential pair together to reduce conversion errors caused by unequal trace noise pickup.
Portable Data-Acquisition Instrument
The MCP3302-BI/SL is appropriate for portable data-acquisition instruments that combine a microcontroller, analog sensor conditioning, and a compact 14-pin SOIC ADC. Its two differential or four single-ended input choices allow one package to handle analog measurements such as pressure, position, bridge voltage, or buffered sensor outputs. The 13-bit SAR ADC supports deterministic digital sampling through SPI, and the device's low-power emphasis is valuable in field instruments operated from batteries. Reference quality directly affects measurement stability, so use suitable local bypassing and follow the manufacturer recommendations for reference routing. Keep the SPI clock and digital return currents away from high-impedance analog inputs, and provide an analog ground strategy appropriate to the instrument. Confirm the maximum source impedance, acquisition time, and sample rate for the selected mode before setting the system clock and conversion schedule.
بيانات مرجعية هندسية لـ MCP3302-BI/SL — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MCP3302-I/SL | MCP3302-SI/LL | MCP3302-TI/LL |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| ADC Resolution | 13 bit | 13 bit | 13 bit | 13 bit |
| Differential Input Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Single-Ended Input Channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Conversion Architecture | 1 SAR converter | 1 SAR converter | 1 SAR converter | 1 SAR converter |
| Digital Interface | SPI serial interface | SPI serial interface | SPI serial interface | SPI serial interface |
| Input Configuration | Fully differential | Fully differential | Fully differential | Fully differential |
أبرز الفروقات
- Matches the complete MCP3302 family architecture (مقابلMCP3302-I/SL)
- Preserves the same physical PCB footprint (مقابلMCP3302-SI/LL)
- Maintains the same acquisition architecture (مقابلMCP3302-TI/LL)
ملاحظات التصميم
Route each differential input as a closely matched pair with a continuous return path beneath or alongside the signal traces. This is especially important because the MCP3302-BI/SL supports two fully differential channels. Keep the SPI clock and chip-select routing away from high-impedance analog nodes, and establish a single-point analog-to-digital ground transition according to the complete board power and return architecture.
Provide local bypassing at the device supply and reference pins using the capacitance and placement recommendations in the manufacturer datasheet. Reference stability directly affects conversion results, so avoid long reference traces and noisy digital return current. Verify the power-supply range and startup behavior before attaching the SPI controller, particularly in low-power systems that repeatedly enable and disable the measurement chain.
Do not select an input mode solely from the channel count. The device supports two differential channels or four single-ended channels, and the correct pin usage, common-mode limits, and allowed voltage range must be followed for the chosen configuration. Also account for source impedance and acquisition time so that the input settles before the SAR conversion result is sampled.
معلومات الامتثال
Compliance status is not stated on the cited product and distributor pages.