Microchip Technology

MCP3302-BI/SL - 13-Bit 2-Channel SAR ADC | Microchip

MPN: MCP3302-BI/SL ✓ فعال
14-pin SOIC Package
MOQ: 1 |

MCP3302-BI/SL جائزہ

Microchip Technology MCP3302-BI/SL is a 13-bit analog-to-digital converter with two differential input channels, four single-ended inputs, one SAR conversion engine, and an SPI serial interface in a 14-pin SOIC package. It is designed for compact, low-power measurement systems where differential sensing improves signal integrity and common-mode rejection.

An ADC converts an analog voltage into a numeric value for processing, measurement, logging, or control. The MCP3302 belongs to the successive-approximation-register, or SAR, ADC family. Its SAR architecture compares the input against an internal DAC through successive conversion steps, providing predictable sampling behavior suitable for instrumentation and embedded data-acquisition systems.

The MCP3302-BI/SL provides 13-bit resolution, two differential or four single-ended input choices, and one SAR converter. Its SPI interface supports connection to microcontrollers and other digital controllers. Full differential inputs are especially useful when the measured source sits around a nonzero reference voltage or when ground offsets and coupled noise could affect single-ended measurements.

The device is aimed at battery-powered systems and remote data-acquisition equipment, according to the manufacturer product page. Its low-power operating approach helps limit energy use in portable instruments, while the 14-pin SOIC package supports conventional surface-mount assembly. The BI ordering code and SL package code identify the exact commercial variant represented by MCP3302-BI/SL.

Typical uses include battery monitors, current and voltage measurements, temperature sensing, industrial process measurement, portable instrumentation, and remote sensor acquisition. Differential pairing is useful for ratiometric sensor measurements, bridge outputs, and amplified sensor signals where rejecting common-mode disturbance is important. The SPI interface also allows the ADC to be shared with other compatible peripherals on a controller bus.

Design the reference, analog input, and digital interfaces carefully. Keep analog and return paths short, provide stable reference bypassing, and use an appropriate common-mode range and source impedance for the selected channel configuration. Confirm conversion timing, input capacitance, and operating limits against the manufacturer datasheet before establishing system timing or scaling sensor output.

This product page combines the manufacturer product description with verified distributor identification, packaging information, application guidance, and drop-in alternatives. It is intended to help engineers evaluate ADC architecture, pin compatibility, interface requirements, and design constraints before embedding the MCP3302-BI/SL in a PCB design.

کے لیے ڈراپ اِن متبادل MCP3302-BI/SL — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

MCP3302-I/SL

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 14-pin SOIC
Same 13-bit resolution, 2 differential or 4 single-ended inputs, 1 SAR converter, and 14-pin SOIC footprint; the temperature-grade suffix differs, with 0% change in the listed architecture ratings.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MCP3302-SI/LL

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 14-pin SOIC
Same 13-bit resolution, 2 differential or 4 single-ended inputs, 1 SAR converter, and 14-pin SOIC footprint; only the family ordering grade differs, with 0% change in the listed architecture ratings.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MCP3302-TI/LL

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 14-pin SOIC
Same 13-bit resolution, 2 differential or 4 single-ended inputs, 1 SAR converter, and 14-pin SOIC footprint; only the family ordering grade differs, with 0% change in the listed architecture ratings.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MCP3302-BI/SL زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

ADC Resolution 13 bit
Differential Input Channels 2 channels
Single-Ended Input Channels 4 channels
Conversion Architecture 1 SAR converter
Input Type Fully differential
Digital Interface SPI serial interface
پیکیج 14-pin SOIC
ماؤنٹنگ ٹائپ Surface mount
Power Consumption Low power

MCP3302-BI/SL 14-pin soic پن کنفیگریشن گائیڈ

MCP3302-BI/SL (14-pin soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

MCP3302-BI/SL کے لیے 14-pin soic پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MCP3302-BI/SL.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MCP3302-BI/SL کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Voltage Measurement, Industrial Sensor Acquisition, Temperature Sensing Front End, Remote Environmental Monitoring, Portable Current Measurement, Portable Data-Acquisition Instrument.

⚡

Battery-Powered Voltage Measurement

The MCP3302-BI/SL fits portable voltage-measurement systems because it combines a 13-bit SAR ADC, two differential inputs or four single-ended inputs, and low-power operation in a 14-pin SOIC package. The converter can digitize a divided battery or supply voltage for display, threshold evaluation, or energy-management control through its SPI interface. Differential measurement is useful when the signal is referenced to another battery rail or sensor output, helping reject shared disturbances that would affect a single-ended reading. The designer should establish the input range, source impedance, sample rate, and reference arrangement from the manufacturer datasheet. A low-noise local reference, short analog traces, and a return path adjacent to the measurement signal help preserve accuracy. The SPI controller must also honor the converter's command and result timing, particularly when multiple measurements are coordinated with other acquisition channels.

🏭

Industrial Sensor Acquisition

The MCP3302-BI/SL is suitable for industrial sensor acquisition when the design needs 13-bit resolution, differential input handling, and a compact 14-pin SOIC footprint. Two differential channels can monitor outputs from bridge sensors, instrumentation amplifiers, or current-sense circuits, while four single-ended inputs expand measurement capacity when fully differential operation is unnecessary. Differential pairing is valuable when sensor outputs sit around a nonzero common-mode voltage or when the wiring introduces ground-offset errors. The SPI interface allows a microcontroller to configure conversions and retrieve results without requiring a parallel bus. Before finalizing the design, verify signal range, common-mode limits, acquisition time, and input capacitance against the manufacturer datasheet. Place protection networks close to the connector, maintain a continuous return path, and keep digital clock activity away from sensitive analog nodes to prevent conversion errors.

🌡️

Temperature Sensing Front End

The MCP3302-BI/SL can digitize resistive temperature-sensor outputs in compact instrumentation because its SAR architecture provides 13-bit resolution and accepts either two differential or four single-ended input configurations. A differential connection can monitor a bridge or ratiometric sensor referenced to a stable excitation, while a single-ended channel can serve a buffered thermistor or temperature-to-voltage amplifier output. The same SPI interface used for initiating conversions also supports deterministic sensor sampling in a microcontroller-based controller. For accurate results, use the sensor's specified excitation and resistance limits, account for the ADC input network, and select a reference strategy that remains stable over the required measurement temperature range. Check the conversion timing and input settling requirements in the manufacturer datasheet. Place the sensing network away from heat sources and switching components when the enclosure allows, and verify calibration results across the full operating range.

🧩

Remote Environmental Monitoring

The MCP3302-BI/SL suits remote environmental monitoring nodes that need low-power operation, two differential measurement channels, and a compact serial-interface ADC. It can digitize inputs from external temperature, humidity, pressure, or gas sensors when their analog outputs are scaled to the converter's allowable range. Two differential channels permit measurement of paired sensor signals or a sensor plus reference channel, while four single-ended inputs can support a mixed acquisition plan. The 13-bit conversion result is suitable for many slow environmental measurements where long-term stability and low system power are more important than high-speed sampling. Designers should confirm the input range and conversion rate for the selected sensor bandwidth, then apply calibration and digital filtering as appropriate. A stable reference, local bypass capacitance, controlled return routing, and a protected enclosure connection help preserve measurement repeatability across remote installations.

🔋

Portable Current Measurement

The MCP3302-BI/SL can acquire current-sense information in portable power tools, battery instruments, and compact energy monitors. Its two differential channels are suited to monitoring the voltage output of a current-sense amplifier without tying the measurement directly to ground, while its 13-bit resolution provides a useful balance between measurement resolution and conversion complexity for many power and system-monitoring tasks. The SPI interface allows a controller to sample current information during energy accounting, protection decisions, or operating-state display. The input network should be designed around the sense-amplifier output range, and the designer must verify input common-mode limits and source impedance from the manufacturer datasheet. Place the sense amplifier close to the ADC when practical, maintain a low-impedance reference, and route the differential pair together to reduce conversion errors caused by unequal trace noise pickup.

📟

Portable Data-Acquisition Instrument

The MCP3302-BI/SL is appropriate for portable data-acquisition instruments that combine a microcontroller, analog sensor conditioning, and a compact 14-pin SOIC ADC. Its two differential or four single-ended input choices allow one package to handle analog measurements such as pressure, position, bridge voltage, or buffered sensor outputs. The 13-bit SAR ADC supports deterministic digital sampling through SPI, and the device's low-power emphasis is valuable in field instruments operated from batteries. Reference quality directly affects measurement stability, so use suitable local bypassing and follow the manufacturer recommendations for reference routing. Keep the SPI clock and digital return currents away from high-impedance analog inputs, and provide an analog ground strategy appropriate to the instrument. Confirm the maximum source impedance, acquisition time, and sample rate for the selected mode before setting the system clock and conversion schedule.

What is the MCP3302-BI/SL?
The MCP3302-BI/SL is a 13-bit successive-approximation-register ADC with two differential input channels, four single-ended inputs, one SAR conversion engine, and an SPI interface. According to the Microchip product page, the device combines full differential inputs and low power consumption in a small package for battery-powered and remote data-acquisition systems.
What are the key specifications of MCP3302-BI/SL that engineers should know?
The MCP3302-BI/SL provides 13-bit resolution, two differential or four single-ended input channels, one SAR converter, and an SPI serial interface in a 14-pin SOIC package. According to the Microchip product page, its fully differential inputs and low-power operation suit battery-powered instruments and remote data-acquisition equipment.
How many ADC input channels does MCP3302-BI/SL have?
The MCP3302-BI/SL supports two differential input channels or four single-ended input channels. The manufacturer identifies the device as a 2-channel, 4-input, 1-SAR converter. Differential operation provides two analog input pins per channel, while single-ended operation allows more measurements against the device reference.
Is MCP3302-BI/SL suitable for battery-powered measurement systems?
Yes, the MCP3302-BI/SL is specifically positioned for battery-powered systems because its low power consumption fits portable measurement requirements. According to the Microchip product page, the converter also supports remote data-acquisition applications. The exact supply range and active current should be checked in the manufacturer datasheet.
Where can I download the MCP3302-BI/SL datasheet PDF?
The MCP3302-BI/SL datasheet and product documentation can be reached through the official Microchip MCP3302 product page at https://www.microchip.com/en-us/product/MCP3302. The page provides device documentation and ordering information, while the part-specific PDF should be selected for electrical limits, pin descriptions, and timing details.
Where can I find the MCP3302-BI/SL pinout?
The MCP3302-BI/SL pinout is published in the manufacturer datasheet under the pin-description and package information for the 14-pin SOIC. Use that table when assigning power, ground, analog inputs, reference connections, and SPI signals. The package drawing also identifies pin 1 and the physical orientation of the 14 leads.
What interface does the MCP3302-BI/SL use?
The MCP3302-BI/SL uses an industry-standard SPI serial interface for transferring conversion commands and reading results from the controller. According to the Microchip product page, this interface supports integration with embedded systems. Signal timing, chip-select behavior, and serial clock modes should be confirmed in the manufacturer datasheet.
When should I choose MCP3302-BI/SL for a differential sensor?
Choose the MCP3302-BI/SL when the sensor output benefits from differential measurement and the system has two differential input channels available. Its 13-bit resolution, fully differential inputs, and SPI interface suit bridge sensors, current-sense amplifiers, and ratiometric measurements where common-mode disturbance must be rejected.
What is the difference between MCP3302-BI/SL and MCP3302-I/SL?
MCP3302-BI/SL and MCP3302-I/SL belong to the same MCP3302 family and share the 14-pin SOIC package, 13-bit resolution, two differential or four single-ended inputs, and one SAR converter. Their ordering-code suffixes identify different temperature or qualification grades, so the exact grade distinction should be confirmed in the manufacturer ordering information.
Can MCP3302-I/SL replace MCP3302-BI/SL without changing the PCB?
MCP3302-I/SL can serve as a candidate replacement because it uses the same MCP3302 family architecture and 14-pin SOIC footprint. The shared specifications include 13-bit resolution, two differential or four single-ended inputs, one SAR converter, and an SPI interface. Verify temperature grade, qualification, and availability before approving the substitution.
What is the best drop-in replacement for MCP3302-BI/SL?
MCP3302-I/SL is the closest identified same-family drop-in candidate because it shares the MCP3302 electrical architecture and 14-pin SOIC footprint. Its key ratings match the target's 13-bit resolution, two differential or four single-ended inputs, one SAR converter, and SPI interface. Confirm ordering-grade requirements before production use.
What can replace MCP3302-BI/SL?
The identified replacement candidates are other MCP3302 ordering variants in the same 14-pin SOIC family, including MCP3302-I/SL, MCP3302-SI/LL, and MCP3302-TI/LL. They preserve the 13-bit converter, two differential or four single-ended inputs, one SAR engine, and SPI interface. Review temperature grade and qualification before substitution.
Is MCP3302-BI/SL the same as MCP3302-I/SL?
MCP3302-BI/SL and MCP3302-I/SL are not identical ordering codes, but they are electrically close members of the same MCP3302 family. Both use the 14-pin SOIC package and provide 13-bit resolution, two differential or four single-ended inputs, one SAR converter, and an SPI interface. The suffix determines the applicable ordering grade.
What is the best Analog Devices equivalent for MCP3302-BI/SL?
No verified Analog Devices equivalent was identified for MCP3302-BI/SL. A valid substitute must match the 14-pin SOIC footprint, 13-bit resolution, differential and single-ended input arrangement, SAR conversion architecture, SPI interface, supply range, and timing requirements. Use the Request a Quote form on this page when sourcing engineering support for a qualified replacement.
Where can I buy MCP3302-BI/SL online?
Use the Request a Quote form on this page to request MCP3302-BI/SL availability, current commercial terms, and lead time for the exact 14-pin SOIC ordering code. The manufacturer describes the MCP3302 family as a low-power ADC for battery-powered systems and remote data-acquisition applications, making the precise package and grade important during procurement.
What is the price of MCP3302-BI/SL?
Current commercial terms for MCP3302-BI/SL should be obtained through the Request a Quote form on this page. The form ensures that the inquiry is associated with the exact MCP3302-BI/SL 14-pin SOIC ordering code, allowing the quotation to reflect the required grade, quantity, delivery schedule, and packaging requirements.
What is the lead time for MCP3302-BI/SL?
The current lead time for MCP3302-BI/SL should be confirmed through the Request a Quote form on this page. Include the required quantity, target delivery date, and whether reel, tube, or other approved packaging is acceptable. The manufacturer product page confirms the device family and its suitability for low-power data-acquisition systems.
Is MCP3302-BI/SL in stock?
Inventory for the exact MCP3302-BI/SL ordering code is confirmed through the Request a Quote form on this page. State the required quantity and delivery schedule so current availability can be matched to the 14-pin SOIC device without substituting a different temperature grade or package variant.

کے لیے انجینئرنگ ریفرنس ڈیٹا MCP3302-BI/SL — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose MCP3302-BI/SL when the design requires a Microchip 13-bit SAR ADC with two fully differential channels or four single-ended inputs, an SPI interface, and a 14-pin SOIC footprint. Differential measurement is the primary reason to select it when sensor outputs are centered on a nonzero common-mode voltage or paired signals must reject shared noise. MCP3302-I/SL is a close same-family candidate when its ordering-grade requirements meet the application. MCP3302-SI/LL and MCP3302-TI/LL can also preserve the 14-pin footprint and converter architecture, but their temperature or qualification grades must be checked before use. None of these same-family alternatives is automatically interchangeable across industrial, extended-temperature, or automotive requirements. The manufacturer does not identify a cross-brand drop-in equivalent here, so a different manufacturer's ADC should be treated as a redesign unless its package, electrical limits, acquisition timing, reference arrangement, and serial protocol are verified independently.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MCP3302-I/SL MCP3302-SI/LL MCP3302-TI/LL
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
ADC Resolution 13 bit 13 bit 13 bit 13 bit
Differential Input Channels 2 channels 2 channels 2 channels 2 channels
Single-Ended Input Channels 4 channels 4 channels 4 channels 4 channels
Conversion Architecture 1 SAR converter 1 SAR converter 1 SAR converter 1 SAR converter
Digital Interface SPI serial interface SPI serial interface SPI serial interface SPI serial interface
Input Configuration Fully differential Fully differential Fully differential Fully differential

اہم امتیازی خصوصیات

  • Matches the complete MCP3302 family architecture (بمقابلہMCP3302-I/SL)
  • Preserves the same physical PCB footprint (بمقابلہMCP3302-SI/LL)
  • Maintains the same acquisition architecture (بمقابلہMCP3302-TI/LL)

ڈیزائن نوٹس

Route each differential input as a closely matched pair with a continuous return path beneath or alongside the signal traces. This is especially important because the MCP3302-BI/SL supports two fully differential channels. Keep the SPI clock and chip-select routing away from high-impedance analog nodes, and establish a single-point analog-to-digital ground transition according to the complete board power and return architecture.

Provide local bypassing at the device supply and reference pins using the capacitance and placement recommendations in the manufacturer datasheet. Reference stability directly affects conversion results, so avoid long reference traces and noisy digital return current. Verify the power-supply range and startup behavior before attaching the SPI controller, particularly in low-power systems that repeatedly enable and disable the measurement chain.

Do not select an input mode solely from the channel count. The device supports two differential channels or four single-ended channels, and the correct pin usage, common-mode limits, and allowed voltage range must be followed for the chosen configuration. Also account for source impedance and acquisition time so that the input settles before the SAR conversion result is sampled.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Compliance status is not stated on the cited product and distributor pages.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

mcp3302 datasheet MCP3302-BI/SL datasheet MCP3302-BI/SL pinout MCP3302-BI/SL specifications MCP3302-BI/SL equivalent MCP3302-BI/SL replacement MCP3302-BI/SL cross reference MCP3302-BI/SL price MCP3302-BI/SL stock Microchip MCP3302-BI/SL MCP3302 14-SOIC ADC MCP3302-BI/SL application circuit

متعلقہ اجزاء اور اصطلاحات

Microchip Technology MCP3302-BI/SL MCP3302-I/SL MCP3302-SI/LL MCP3302-TI/LL MCP3302 analog-to-digital converter ADC successive-approximation-register ADC SAR ADC SPI 13-bit resolution differential input single-ended input low-power ADC battery-powered systems remote data acquisition 14-pin SOIC SOIC family surface-mount package bridge sensor current-sense amplifier instrumentation amplifier reference voltage common-mode rejection
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں