MCP3551T-E/MS - 22-Bit Delta-Sigma ADC | Microchip Technology
MPN: MCP3551T-E/MS ✓ نشطMCP3551T-E/MS نظرة عامة
A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time delta-sigma modulation and digital filtering to convert an analog voltage into a high-resolution digital code. Within the data-converter hierarchy, the MCP3551T-E/MS is an ADC, a data-converter IC, and a semiconductor intended for precision signal acquisition. The architecture is especially useful when high resolution, low noise, and narrow-band measurement performance are more important than rapid conversion of rapidly changing signals.
The MCP3551 family provides 22-bit resolution, a single analog input channel, and a fully differential input configuration. Differential input allows a sensor or measurement circuit to drive two related signals and helps reject common-mode disturbances. The 14 samples-per-second rate is suitable for slow industrial variables such as temperature, pressure, load, level, and chemical concentration. The read-only SPI-compatible interface supports deterministic digital communication while requiring the host controller to request and receive conversion data.
Operation from 2.7 V supports integration with 3.3 V systems, while the extended -40 °C to +125 °C range covers industrial environments beyond typical commercial-temperature operation. The low-power, single-channel architecture avoids unnecessary conversion complexity when the required measurement bandwidth is low. Because the input is fully differential, application circuits should provide a suitable reference, sensor excitation, input filtering, and a defined common-mode range before the converter input.
Typical applications include bridge-based pressure and load measurement, current-loop and voltage-loop instrumentation, battery-cell monitoring, laboratory sensor interfaces, and industrial process-control nodes. In these systems, the ADC commonly sits behind a low-noise analog front end, and the digital controller configures the converter through its serial interface before processing the resulting 22-bit code.
For PCB implementation, place the analog input and reference components close to the device, keep digital clock and control traces away from sensitive analog inputs, and provide a clean ground return. Confirm the input common-mode voltage, reference voltage, filter requirements, and conversion timing against the manufacturer datasheet before finalizing the schematic.
This product record combines the manufacturer’s device description with practical engineering guidance, including interface considerations, application fit, package constraints, and a parameter-by-parameter comparison framework. It is intended to help engineers qualify the converter for precision acquisition rather than merely identify the orderable part number.
بدائل مباشرة لـ MCP3551T-E/MS — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MCP3551T-E/MS (نفس عامل الشكل والبصمة) — يختلف في Converter Type, Digital Interface.
MCP3551-E/MS
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←MCP3421A3T-E/CH
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
MCP3551T-E/MS الحدود القصوى والخصائص الكهربائية
| Converter Type | Single-channel delta-sigma ADC |
| الدقة | 22 bit |
| Output Data Rate | 14 samples/s |
| Analog Input Channels | 1 channel |
| Input Architecture | Fully differential |
| Digital Interface | SPI-compatible, read-only |
| Minimum Supply Voltage | 2.7 V |
| نطاق درجة حرارة التشغيل | -40 °C to +125 °C |
| العلبة | 8-pin MSOP |
| نوع التركيب | Surface mount |
دليل تكوين أطراف MCP3551T-E/MS 8-pin msop
تكوين الأطراف لـ MCP3551T-E/MS (حزمة 8-pin msop). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MCP3551T-E/MS.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MCP3551T-E/MS مناسب لـ 6 التطبيقs: Industrial Pressure and Load Measurement, Temperature and Environmental Sensor Interface, Battery Cell Voltage Monitoring, Process Control Sensor Node, Precision Current Measurement, Laboratory and Instrumentation Signal Acquisition.
Industrial Pressure and Load Measurement
The MCP3551T-E/MS fits bridge-based pressure, force, and load measurement systems that prioritize resolution over acquisition speed. Its 22-bit conversion resolution and 14 samples-per-second output rate can represent slow sensor signals with fine digital resolution, while the fully differential input suits a Wheatstone bridge when driven by a suitable excitation source. Place low-noise amplification and filtering between the bridge and converter, and maintain the signal within the specified input common-mode range. Differential routing also helps reject common-mode voltage present at both inputs, but practical rejection still depends on component matching and the complete analog front end.
موصى به
Temperature and Environmental Sensor Interface
The MCP3551T-E/MS is appropriate for slow temperature, humidity, and environmental sensor interfaces where the measured quantity changes gradually. The 22-bit resolution provides ample code space for calibration and linearization, and the 14 samples-per-second rate is adequate for many thermal monitoring loops. A low-noise reference and careful sensor excitation are important because both can dominate the total measurement error. Use the converter’s differential input to reject disturbances shared by the two sensor nodes, then apply digital filtering and sensor-specific calibration in the host controller.
موصى به
Battery Cell Voltage Monitoring
The MCP3551T-E/MS can support precise cell or battery-group monitoring when the conversion rate only needs to track slow voltage changes. Its 22-bit resolution and fully differential input allow a scaled cell voltage to be measured against a controlled reference network, while the 14 samples-per-second rate suits periodic balancing and state-of-charge systems. The design must keep the scaled input inside the converter’s common-mode limits, isolate the measurement path from charger noise, and use a reference whose drift is appropriate for the required battery accuracy.
موصى به
Process Control Sensor Node
The MCP3551T-E/MS supports distributed process-control nodes that monitor slow variables such as level, concentration, pressure, or flow. Its 14 samples-per-second output rate provides regular updates without the complexity of a high-speed converter, and the 22-bit result can retain useful resolution after substantial analog scaling. The read-only SPI-compatible interface simplifies periodic communication with a local controller. A practical implementation should employ input protection, anti-alias filtering, a stable reference, and galvanic isolation when the sensor is exposed to industrial ground-potential differences.
موصى به
Precision Current Measurement
The MCP3551T-E/MS is suitable for current-shunt measurements where the converter’s differential input can receive the small voltage developed across a sense resistor. The 22-bit resolution is useful when the shunt signal is heavily scaled, while the 14 samples-per-second rate is appropriate for power, battery, or motor-control feedback that does not require waveform reconstruction. A differential amplifier can improve common-mode rejection and drive the converter’s input range. Account for amplifier offset, drift, resistor tolerance, shunt self-heating, and converter noise when calculating the achievable measurement accuracy.
موصى به
Laboratory and Instrumentation Signal Acquisition
The MCP3551T-E/MS can serve as the precision conversion stage in laboratory equipment that measures low-frequency sensor signals. Its 22-bit resolution offers a wide digital code range, and the fully differential architecture can simplify front-end design when both measurement nodes are available. The 14 samples-per-second rate is suitable for voltmeters, process meters, and analytical instruments that acquire quasi-static results rather than transient waveforms. For best performance, use a low-noise reference, shield sensitive analog traces, maintain a quiet ground structure, and calibrate offset and gain at the instrument level.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MCP3551T-E/MS — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Package | 8-pin MSOP |
| Brand | Microchip Technology |
| Converter Type | Delta-sigma ADC |
| Resolution | 22 bit |
| Output Data Rate | 14 samples/s |
| Input Channels | 1 channel |
| Input Architecture | Fully differential |
| Digital Interface | Read-only SPI-compatible |
| Minimum Supply Voltage | 2.7 V |
| Operating Temperature Range | -40 °C to +125 °C |
أبرز الفروقات
- High-resolution conversion for slow precision measurements (مقابلMCP3551-E/MS)
- Differential input supports direct bridge and shunt measurement (مقابلMCP3551-E/SN)
- Extended-temperature family operation (مقابلMCP3551-E/SN)
ملاحظات التصميم
Place the reference bypass and analog-input conditioning components close to their associated MCP3551T-E/MS pins. Route the two differential inputs as a matched pair and keep them away from the SPI clock and switching-node traces. Use a continuous ground plane under the MSOP where practical, with analog and digital return currents directed toward their respective quiet sections. The pin-description and layout guidance in the manufacturer datasheet should be followed before layout release.
Design the analog front end around the converter’s 14 samples-per-second rate and stated noise behavior. An input anti-alias filter must suppress out-of-band energy without introducing excessive phase variation at the relevant measurement bandwidth. If an amplifier drives the fully differential input, verify its output common-mode range against the converter limits. Avoid relying on resolution alone; offset, gain error, reference drift, resistor tolerance, and noise usually determine the useful accuracy of the complete measurement chain.
Do not treat the 22-bit resolution as an unconditional 22-bit accuracy specification. Confirm the selected operating mode, reference voltage, input range, gain configuration, and calibration method in the manufacturer datasheet. Also check the ordering-code suffix carefully: the same MCP3551 family may be offered in different package or temperature variants, and a package change is not a drop-in PCB replacement.
معلومات الامتثال
The current manufacturer material-compliance declarations and exact AEC-Q100 qualification record should be checked for the MCP3551T-E/MS ordering code.