Microchip Technology

MCP3551T-E/MS - 22-Bit Delta-Sigma ADC | Microchip Technology

N.º da peça: MCP3551T-E/MS ✓ Ativo
2.7 V Vdss 8-pin MSOP Package
MOQ: 1 |

MCP3551T-E/MS Visão geral

The Microchip Technology MCP3551T-E/MS is a single-channel, 22-bit delta-sigma analog-to-digital converter with a 14 samples-per-second output rate, a fully differential input architecture, and a read-only SPI-compatible interface. The converter is packaged in an 8-pin MSOP package for compact industrial and process-measurement designs. Its 2.7 V minimum operating voltage and -40 °C to +125 °C temperature range make it suitable for precision instrumentation operating from low-voltage industrial supplies.

A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time delta-sigma modulation and digital filtering to convert an analog voltage into a high-resolution digital code. Within the data-converter hierarchy, the MCP3551T-E/MS is an ADC, a data-converter IC, and a semiconductor intended for precision signal acquisition. The architecture is especially useful when high resolution, low noise, and narrow-band measurement performance are more important than rapid conversion of rapidly changing signals.

The MCP3551 family provides 22-bit resolution, a single analog input channel, and a fully differential input configuration. Differential input allows a sensor or measurement circuit to drive two related signals and helps reject common-mode disturbances. The 14 samples-per-second rate is suitable for slow industrial variables such as temperature, pressure, load, level, and chemical concentration. The read-only SPI-compatible interface supports deterministic digital communication while requiring the host controller to request and receive conversion data.

Operation from 2.7 V supports integration with 3.3 V systems, while the extended -40 °C to +125 °C range covers industrial environments beyond typical commercial-temperature operation. The low-power, single-channel architecture avoids unnecessary conversion complexity when the required measurement bandwidth is low. Because the input is fully differential, application circuits should provide a suitable reference, sensor excitation, input filtering, and a defined common-mode range before the converter input.

Typical applications include bridge-based pressure and load measurement, current-loop and voltage-loop instrumentation, battery-cell monitoring, laboratory sensor interfaces, and industrial process-control nodes. In these systems, the ADC commonly sits behind a low-noise analog front end, and the digital controller configures the converter through its serial interface before processing the resulting 22-bit code.

For PCB implementation, place the analog input and reference components close to the device, keep digital clock and control traces away from sensitive analog inputs, and provide a clean ground return. Confirm the input common-mode voltage, reference voltage, filter requirements, and conversion timing against the manufacturer datasheet before finalizing the schematic.

This product record combines the manufacturer’s device description with practical engineering guidance, including interface considerations, application fit, package constraints, and a parameter-by-parameter comparison framework. It is intended to help engineers qualify the converter for precision acquisition rather than merely identify the orderable part number.

Alternativas drop-in para MCP3551T-E/MS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MCP3551T-E/MS (mesmo formato e footprint) — diferindo em Converter Type, Digital Interface.

Microchip Technology
Converter Type: 22-bit delta-sigma ADC
Digital Interface: SPI

MCP3551-E/MS

✅ Drop-In
Microchip Technology
📦 8-pin MSOP
22-bit delta-sigma ADC · 1 channel · 1 sigma-delta · Fully differential · 13.75 samples/s · 2.5 uVRMS · 10 ppm · 2.7 V

Consulte o preço

Ver ficha técnica →

MCP3421A3T-E/CH

✅ Drop-In
📦 8-pin MSOP
Resolution is 18 bit versus 22 bit (-18%) and conversion rate is 3.75 SPS versus 13.75 SPS (-73%)

📋 Alternativa de referência (fora do catálogo)

MCP3551T-E/MS Classificações máximas e características elétricas

Converter Type Single-channel delta-sigma ADC
Resolução 22 bit
Output Data Rate 14 samples/s
Analog Input Channels 1 channel
Input Architecture Fully differential
Digital Interface SPI-compatible, read-only
Minimum Supply Voltage 2.7 V
Faixa de temperatura de operação -40 °C to +125 °C
Encapsulamento 8-pin MSOP
Tipo de montagem Surface mount

Guia de Configuração de Pinos do MCP3551T-E/MS 8-pin msop

Configuração de pinos para MCP3551T-E/MS (pacote 8-pin msop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 8-pin msop para MCP3551T-E/MS

Nenhum dado detalhado de pinagem disponível para MCP3551T-E/MS.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MCP3551T-E/MS é adequado para 6 aplicaçãos: Industrial Pressure and Load Measurement, Temperature and Environmental Sensor Interface, Battery Cell Voltage Monitoring, Process Control Sensor Node, Precision Current Measurement, Laboratory and Instrumentation Signal Acquisition.

🏭

Industrial Pressure and Load Measurement

The MCP3551T-E/MS fits bridge-based pressure, force, and load measurement systems that prioritize resolution over acquisition speed. Its 22-bit conversion resolution and 14 samples-per-second output rate can represent slow sensor signals with fine digital resolution, while the fully differential input suits a Wheatstone bridge when driven by a suitable excitation source. Place low-noise amplification and filtering between the bridge and converter, and maintain the signal within the specified input common-mode range. Differential routing also helps reject common-mode voltage present at both inputs, but practical rejection still depends on component matching and the complete analog front end.

🧩

Temperature and Environmental Sensor Interface

The MCP3551T-E/MS is appropriate for slow temperature, humidity, and environmental sensor interfaces where the measured quantity changes gradually. The 22-bit resolution provides ample code space for calibration and linearization, and the 14 samples-per-second rate is adequate for many thermal monitoring loops. A low-noise reference and careful sensor excitation are important because both can dominate the total measurement error. Use the converter’s differential input to reject disturbances shared by the two sensor nodes, then apply digital filtering and sensor-specific calibration in the host controller.

⚡

Battery Cell Voltage Monitoring

The MCP3551T-E/MS can support precise cell or battery-group monitoring when the conversion rate only needs to track slow voltage changes. Its 22-bit resolution and fully differential input allow a scaled cell voltage to be measured against a controlled reference network, while the 14 samples-per-second rate suits periodic balancing and state-of-charge systems. The design must keep the scaled input inside the converter’s common-mode limits, isolate the measurement path from charger noise, and use a reference whose drift is appropriate for the required battery accuracy.

🏭

Process Control Sensor Node

The MCP3551T-E/MS supports distributed process-control nodes that monitor slow variables such as level, concentration, pressure, or flow. Its 14 samples-per-second output rate provides regular updates without the complexity of a high-speed converter, and the 22-bit result can retain useful resolution after substantial analog scaling. The read-only SPI-compatible interface simplifies periodic communication with a local controller. A practical implementation should employ input protection, anti-alias filtering, a stable reference, and galvanic isolation when the sensor is exposed to industrial ground-potential differences.

📱

Precision Current Measurement

The MCP3551T-E/MS is suitable for current-shunt measurements where the converter’s differential input can receive the small voltage developed across a sense resistor. The 22-bit resolution is useful when the shunt signal is heavily scaled, while the 14 samples-per-second rate is appropriate for power, battery, or motor-control feedback that does not require waveform reconstruction. A differential amplifier can improve common-mode rejection and drive the converter’s input range. Account for amplifier offset, drift, resistor tolerance, shunt self-heating, and converter noise when calculating the achievable measurement accuracy.

🖥️

Laboratory and Instrumentation Signal Acquisition

The MCP3551T-E/MS can serve as the precision conversion stage in laboratory equipment that measures low-frequency sensor signals. Its 22-bit resolution offers a wide digital code range, and the fully differential architecture can simplify front-end design when both measurement nodes are available. The 14 samples-per-second rate is suitable for voltmeters, process meters, and analytical instruments that acquire quasi-static results rather than transient waveforms. For best performance, use a low-noise reference, shield sensitive analog traces, maintain a quiet ground structure, and calibrate offset and gain at the instrument level.

Resumo dos produtos recomendados

MCP3551 Converter family used for precision differential measurements Usado em: Industrial Pressure and Load Measurement, Temperature and Environmental Sensor Interface, Battery Cell Voltage Monitoring, Process Control Sensor Node, Precision Current Measurement, Laboratory and Instrumentation Signal Acquisition MCP3553 Related Microchip delta-sigma ADC family Usado em: Industrial Pressure and Load Measurement, Temperature and Environmental Sensor Interface, Battery Cell Voltage Monitoring, Process Control Sensor Node, Precision Current Measurement, Laboratory and Instrumentation Signal Acquisition
What is the MCP3551T-E/MS?
The MCP3551T-E/MS is a single-channel, 22-bit delta-sigma analog-to-digital converter from Microchip Technology. It provides a 14 samples-per-second output rate, fully differential analog input, and a read-only SPI-compatible interface in an 8-pin MSOP package. According to the Microchip MCP3551 product page, this converter is intended for precision industrial, sensor, and process-control measurements where high resolution and narrow-band accuracy matter more than high-speed sampling.
What are the key specifications of MCP3551T-E/MS?
The MCP3551T-E/MS combines 22-bit resolution, a 14 samples-per-second output rate, and one fully differential input channel. It uses a read-only SPI-compatible interface, operates from a 2.7 V minimum supply, and covers -40 °C to +125 °C. The Microchip product page identifies the device as an 8-pin MSOP option, making these ratings suitable for compact, low-power precision acquisition systems operating across an extended industrial temperature range.
Where can I download the MCP3551T-E/MS datasheet PDF?
The MCP3551T-E/MS datasheet can be obtained from the official Microchip MCP3551 product page or the linked manufacturer documentation. The product page identifies the MCP3551 as a 22-bit precision delta-sigma ADC with a fully differential input and read-only SPI-compatible interface. Before schematic release, use the manufacturer datasheet for the complete pin-description table, electrical limits, timing diagram, initialization sequence, and recommended application circuit.
Where is the MCP3551T-E/MS pinout?
The MCP3551T-E/MS pinout is published in the pin-description section of the Microchip MCP3551 manufacturer datasheet. The component uses an 8-pin MSOP package, and its analog, reference, ground, supply, and serial-interface assignments must be taken directly from the pin table. Use that table when assigning PCB nets because signal names and exposed functions should not be inferred from adjacent pins or from the package drawing alone.
What can replace the MCP3551T-E/MS?
A true drop-in replacement for the MCP3551T-E/MS must use the same 8-pin MSOP footprint, preserve pin-to-pin connections, and remain within 30% of the key electrical ratings. The available cross-reference pages do not identify a confirmed same-package substitute, so no drop-in replacement is asserted here. A package-only match such as the SOIC option cannot replace an MSOP design without a PCB change, and the manufacturer cross-reference tools should be checked before approving any substitution.
Is the MCP3551T-E/MS suitable for process-control measurement?
The MCP3551T-E/MS is suitable for many slow process-control measurements because it provides 22-bit resolution, a 14 samples-per-second output rate, and a fully differential input. The differential architecture is useful for bridge sensors and other measurement front ends where common-mode rejection matters. Actual suitability depends on the selected sensor, excitation scheme, reference accuracy, input common-mode limits, required update time, and the noise performance specified for the operating configuration.
What is the difference between a delta-sigma ADC and a SAR ADC?
A delta-sigma ADC uses continuous-time modulation and digital filtering to produce a high-resolution result at a relatively low output rate, while a SAR ADC converts successive bits during discrete conversion cycles. The MCP3551T-E/MS is a 22-bit delta-sigma ADC operating at 14 samples/s, making it suitable for slow precision measurements. A SAR ADC may be preferred for waveforms or events that require substantially faster sampling than this converter provides.
Does the MCP3551T-E/MS support differential and single-ended measurements?
The MCP3551T-E/MS is identified by Microchip as having a fully differential analog input. A differential measurement uses two input nodes whose voltage difference is converted, which can improve rejection of shared disturbances. A single-ended measurement may still be implemented when the signal and return network are designed to establish the converter’s required common-mode voltage, but the permitted input range must be verified in the manufacturer datasheet before using that arrangement.
How should the MCP3551T-E/MS be used in a precision sensor interface?
Use the MCP3551T-E/MS behind a low-noise analog front end that presents the required differential signal and common-mode voltage. The 22-bit resolution and 14 samples-per-second rate fit slow sensors such as temperature, pressure, load, and chemical probes. The host microcontroller should initialize the converter over its read-only SPI-compatible interface, request conversions, and process the resulting digital values with calibration and filtering appropriate to the sensor and measurement system.
What power and thermal considerations apply to the MCP3551T-E/MS?
The MCP3551T-E/MS operates from a minimum supply voltage of 2.7 V and is specified from -40 °C to +125 °C. The MSOP package keeps the device compact, but total converter dissipation depends on the actual supply voltage, analog configuration, and operating rate. Use the manufacturer’s operating-current and absolute-maximum ratings to estimate junction heating, provide local ground-plane area, and minimize thermal gradients between the analog input and digital interface sections of the PCB.
What is the lifecycle status of the MCP3551T-E/MS?
The MCP3551 family is currently presented on Microchip Technology’s official product page as a precision 22-bit delta-sigma ADC, and the part is actively offered through major component channels. Lifecycle status can change without notice, so request the current lifecycle, stock, and lead-time position for the exact MCP3551T-E/MS ordering code. Use the Request a Quote form on this page for the current commercial response rather than relying on an undated availability statement.
Is MCP3551T-E/MS RoHS compliant and automotive qualified?
The RoHS, REACH, halogen-free, lead-free, conflict-minerals, and automotive-qualification status for the exact MCP3551T-E/MS ordering code should be confirmed through Microchip’s current material-compliance and product-qualification information. The converter family is specified for -40 °C to +125 °C operation, but an extended industrial temperature range alone does not establish AEC-Q100 qualification. Do not infer automotive approval solely from the temperature rating or orderable suffix.
MCP3551T-E/MS vs MCP3551-E/MS: which version should I select?
Both orderable strings refer to the Microchip MCP3551 converter family, but the complete suffix must be checked before comparing electrical behavior, temperature grade, and shipping format. The MCP3551T-E/MS is listed as an 8-MSOP, 22-bit, single-input sigma-delta converter. For a new design, use the manufacturer’s ordering table to confirm that every required electrical characteristic and package attribute matches the selected variant rather than treating the suffix difference as cosmetic.
Where to buy MCP3551T-E/MS online?
Use the Request a Quote form on this page to request the MCP3551T-E/MS with the required package, quantity, and delivery destination. The form is the appropriate route for current supply, lead time, and commercial confirmation. The converter is identified in the manufacturer’s material as a 22-bit, single-channel delta-sigma ADC in an 8-pin MSOP package, but current stock and delivery schedules should be confirmed when the quote is returned.
What is the price of MCP3551T-E/MS?
The current MCP3551T-E/MS commercial price is obtained through the Request a Quote form on this page. No static price is stated because the offering is refreshed against the requested quantity and current supply conditions. Include the required 8-pin MSOP package, order quantity, and destination in the request so the returned quotation corresponds to the exact MCP3551T-E/MS ordering code rather than a family-level quotation.
What is the lead time and stock status for MCP3551T-E/MS?
The current stock and lead time for MCP3551T-E/MS should be confirmed through the Request a Quote form on this page. Manufacturer and distributor listings indicate that the part is offered for acquisition, but a listing alone does not guarantee a fixed quantity or delivery date. State your required order quantity and target date in the request, and request lot-traceability or date-code information if it is important to your manufacturing process.

Dados de referência de engenharia para MCP3551T-E/MS — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MCP3551T-E/MS for a new compact design that needs 22-bit resolution, a fully differential input, a 14 samples-per-second output rate, and an 8-pin MSOP footprint. It is particularly suitable for slow industrial, sensor, battery, and process-control measurements where low-noise differential acquisition is more valuable than high-speed sampling. The MCP3551-E/MS can be considered when its exact ordering attributes match the design, but MCP3551-E/SN is an SOIC package and requires a different footprint rather than a direct MSOP replacement. No confirmed drop-in substitute was identified, so changing manufacturers or packages should trigger a full schematic, layout, timing, and calibration review. Before approving the device, verify its reference requirements, input common-mode limits, initialization sequence, digital timing, and electrical performance in the current manufacturer datasheet.

Comparação com alternativas

Parâmetro Este produto
Package 8-pin MSOP
Brand Microchip Technology
Converter Type Delta-sigma ADC
Resolution 22 bit
Output Data Rate 14 samples/s
Input Channels 1 channel
Input Architecture Fully differential
Digital Interface Read-only SPI-compatible
Minimum Supply Voltage 2.7 V
Operating Temperature Range -40 °C to +125 °C

Principais diferenciais

  • High-resolution conversion for slow precision measurements (vs MCP3551-E/MS)
  • Differential input supports direct bridge and shunt measurement (vs MCP3551-E/SN)
  • Extended-temperature family operation (vs MCP3551-E/SN)

Notas de projeto

Place the reference bypass and analog-input conditioning components close to their associated MCP3551T-E/MS pins. Route the two differential inputs as a matched pair and keep them away from the SPI clock and switching-node traces. Use a continuous ground plane under the MSOP where practical, with analog and digital return currents directed toward their respective quiet sections. The pin-description and layout guidance in the manufacturer datasheet should be followed before layout release.

Design the analog front end around the converter’s 14 samples-per-second rate and stated noise behavior. An input anti-alias filter must suppress out-of-band energy without introducing excessive phase variation at the relevant measurement bandwidth. If an amplifier drives the fully differential input, verify its output common-mode range against the converter limits. Avoid relying on resolution alone; offset, gain error, reference drift, resistor tolerance, and noise usually determine the useful accuracy of the complete measurement chain.

Do not treat the 22-bit resolution as an unconditional 22-bit accuracy specification. Confirm the selected operating mode, reference voltage, input range, gain configuration, and calibration method in the manufacturer datasheet. Also check the ordering-code suffix carefully: the same MCP3551 family may be offered in different package or temperature variants, and a package change is not a drop-in PCB replacement.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The current manufacturer material-compliance declarations and exact AEC-Q100 qualification record should be checked for the MCP3551T-E/MS ordering code.

Buscas relacionadas

MCP3551T-E/MS datasheet MCP3551T-E/MS pinout MCP3551T-E/MS datasheet pdf MCP3551T-E/MS specifications MCP3551T-E/MS equivalent MCP3551T-E/MS replacement MCP3551T-E/MS cross reference MCP3551 22 bit ADC MCP3551 8-MSOP footprint MCP3551 pressure sensor interface MCP3551T-E/MS price MCP3551T-E/MS stock Microchip MCP3551T-E/MS MCP3551T-E/MS vs MCP3551-E/MS

Componentes & termos relacionados

Microchip Technology MCP3551T-E/MS MCP3551 MCP3553 MCP3551-E/MS MCP3551-E/SN MCP3551T-E/SN analog-to-digital converter ADC delta-sigma ADC data-converter IC semiconductor fully differential input SPI-compatible interface read-only SPI 22-bit resolution 14 samples-per-second MSOP 8-pin MSOP surface-mount package industrial process control sensor measurement pressure measurement battery monitoring 2.7 V
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ