Microchip Technology

MCP3562T-E/NC - 24-Bit Dual-Channel 153.6 kSPS ADC

MPN: MCP3562T-E/NC ✓ نشط
3 V Vdss 20-pin UQFN, 3 x 3 mm Package
الحد الأدنى للطلب: 1 |

MCP3562T-E/NC نظرة عامة

The Microchip Technology MCP3562T-E/NC is a low-noise, 24-bit sigma-delta analog-to-digital converter with two differential or four single-ended inputs and a maximum conversion rate of 153.6 kSPS. The device operates from a 3 V supply and is packaged in a 20-pin UQFN measuring 3 x 3 mm.

An analog-to-digital converter is an integrated circuit that converts continuous voltage signals into numerical values for processing, measurement, or transmission. The MCP3562 belongs to the delta-sigma ADC hierarchy, where a modulator and digital filter extract high-resolution measurements from low-frequency analog inputs. Its dual-channel architecture supports two differential channels or four single-ended channels, making it suitable for bridge sensors, pressure transducers, current sensing, and multi-channel instrumentation.

The MCP3562T-E/NC provides 24-bit resolution, four analog input options, and programmable output data rates up to 153.6 kSPS. Its low-noise architecture is intended for systems in which small sensor signals must be resolved accurately, including industrial process monitoring, medical instrumentation, portable measurement equipment, and laboratory data-acquisition systems.

Its sigma-delta conversion principle trades conversion speed for resolution and noise performance. The two-channel differential configuration can reject common-mode noise present on sensor lines, while the four single-ended inputs simplify multiplexed measurement. Digital filtering and programmable data rates allow the system designer to balance conversion speed, noise bandwidth, and power consumption according to the measurement requirement.

Typical uses include strain-gauge and load-cell front ends, thermocouple interface boards, pressure and flow instrumentation, battery-bank monitoring, and factory automation modules. The 3 V supply also integrates naturally with low-voltage sensor nodes and microcontrollers operating from the same rail.

When laying out the circuit, use short, symmetrical routing for differential inputs and place the analog input and reference connections away from switching nodes and high-current traces. Verify the external reference and input voltage limits against the manufacturer datasheet before applying sensor excitation.

This page organizes the conversion performance, channel options, package details, and pin-compatible Microchip alternatives into a design-focused reference. It also adds practical layout guidance, application fit analysis, and a parameter comparison for engineers evaluating replacements before schematic release.

بدائل مباشرة لـ MCP3562T-E/NC — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MCP3562T-E/NC (نفس عامل الشكل والبصمة) — يختلف في Internal Reference, Resolution.

Microchip Technology
Internal Reference: Yes
Resolution: 24 bit

MCP3562RT-E/NC

✅ بديل مباشر
Microchip Technology
📦 20-UQFN (3x3 mm)
24-bit delta-sigma ADC · 24 bit · 153.6 kSPS · 4 single-ended or 2 differential input channels · Yes · 3 V · SPI · 20-pin UQFN, 3 x 3 mm

تواصل لمعرفة السعر

عرض ورقة البيانات ←

MCP3562R-E/NC

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 20-UQFN (3x3 mm)
Same MCP3562 family, channel architecture, and 20-UQFN footprint; onboard reference differentiates it from MCP3562T-E/NC by one functional block

📋 بديل مرجعي (غير موجود في الكتالوج)

MCP3562T-E/NC الحدود القصوى والخصائص الكهربائية

Device Type 24-bit delta-sigma analog-to-digital converter
الدقة 24 bits
Maximum Conversion Rate 153.6 kSPS
Analog Input Configuration 2 differential inputs or 4 single-ended inputs
Number of Channels 2 differential / 4 single-ended
جهد التغذية 3 V
Conversion Architecture Sigma-delta
العلبة 20-pin UQFN, 3 x 3 mm
نوع التركيب Surface mount
Internal Reference Not included; external reference required
Input Type Single-ended or differential
Programmable Data Rate Up to 153.6 kSPS
RoHS Compliance unknown
Automotive Qualification not_applicable

دليل تكوين أطراف MCP3562T-E/NC 20-pin uqfn, 3 x 3 mm

تكوين الأطراف لـ MCP3562T-E/NC (حزمة 20-pin uqfn, 3 x 3 mm). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 20-pin uqfn, 3 x 3 mm لـ MCP3562T-E/NC

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MCP3562T-E/NC.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MCP3562T-E/NC مناسب لـ 6 التطبيقs: Load Cell and Strain-Gauge Measurement, Industrial Pressure and Process Sensing, Battery and Power-Supply Monitoring, Medical and Laboratory Instrumentation, Environmental and IoT Sensor Nodes, Precision Data-Acquisition Systems.

⚖️

Load Cell and Strain-Gauge Measurement

The MCP3562T-E/NC fits bridge-based load-cell and strain-gauge front ends because its two differential inputs can carry the small differential signal produced by a Wheatstone bridge while rejecting common-mode voltage on the sensor leads. The 24-bit resolution provides a high numerical scale for millivolt-level bridge outputs, and the programmable rate of up to 153.6 kSPS allows the design to trade conversion speed against the digital filter bandwidth. Use differential routing with closely matched input components and connect the excitation and reference circuitry according to the manufacturer application guidance.

🏭

Industrial Pressure and Process Sensing

The MCP3562T-E/NC is suitable for pressure, level, and process-control modules that need more than one low-level analog channel. Two differential channels can monitor independent sensor pairs, while the four single-ended configuration supports a multiplexed control panel with shared analog conditioning. The 24-bit conversion resolution helps preserve small process variations, and the 153.6 kSPS maximum rate supports responsive sampling when the digital filter is set appropriately. Place the analog front end near the connector and isolate it from relay, motor, and switching-converter currents.

🔋

Battery and Power-Supply Monitoring

The MCP3562T-E/NC can monitor multiple low-voltage signals in battery-powered instrumentation, including cell voltages, current-sense outputs, and auxiliary supply rails. Its four single-ended inputs reduce the analog channel count needed for a compact monitor, while two differential inputs can measure shunt drops and reject supply-ridge pickup. The 3 V operating supply supports low-power portable systems. Ensure each measured signal remains within the device input limits and account for reference accuracy, because it directly scales the final conversion result.

💊

Medical and Laboratory Instrumentation

The MCP3562T-E/NC is appropriate for low-frequency biomedical instrumentation and laboratory measurement systems where a high-resolution reading is more important than very high sample throughput. Differential inputs help reject offsets and interference on patient-adjacent or bridge-based sensor lines, while selectable single-ended inputs support auxiliary channels such as temperature or gain calibration. The 24-bit output and programmable filtering improve the usable dynamic range of weak signals. Maintain short analog traces, controlled reference routing, and isolation appropriate to the end application.

🧩

Environmental and IoT Sensor Nodes

The MCP3562T-E/NC fits compact environmental-monitoring nodes that combine temperature, humidity, gas, or resistive sensor outputs with an external reference. Four single-ended inputs provide flexibility for multiple low-bandwidth sensors, and the two differential channels can support ratiometric or bridge-based sensing. At 153.6 kSPS maximum rate, the converter can oversample slow environmental signals to improve effective noise performance. Use the programmable digital filter and output data rate to balance measurement rate against power use in battery-operated deployments.

📟

Precision Data-Acquisition Systems

The MCP3562T-E/NC serves as the analog front end in precision data-acquisition equipment requiring 24-bit numerical resolution from multiple channels. Its dual differential architecture supports two simultaneous measurement paths, while four single-ended inputs can be routed through an external multiplexer for wider channel counts. The sigma-delta architecture and programmable rates support oversampling and averaging strategies for low-frequency laboratory and test signals. Keep the analog section separated from digital clocks and use shielded or differential routing where the source impedance is high.

What is the resolution and maximum sample rate of MCP3562T-E/NC?
The MCP3562T-E/NC delivers 24-bit resolution at a maximum conversion rate of 153.6 kSPS. According to the Microchip MCP3562 product page, the converter supports programmable output data rates up to 153.6 kSPS, making it appropriate for high-resolution sensor measurements where both numerical resolution and sampling throughput are important. The -E suffix denotes the extended-temperature product grade, while /NC identifies the specific package configuration.
How many analog input channels does the MCP3562T-E/NC have?
The MCP3562T-E/NC provides two differential inputs or four single-ended inputs. The Microchip MCP3562 family description confirms four single-ended or two differential input channels. Differential operation measures the voltage between two input pairs and improves rejection of common-mode noise, while the four single-ended channels support multiplexed sensor monitoring and simpler wiring for lower-cost measurement systems.
What package is used by MCP3562T-E/NC?
The MCP3562T-E/NC is offered in a 20-pin UQFN package measuring 3 x 3 mm. The package dimensions and 20-lead footprint are identified in the Microchip MCP3562 product documentation and distributor component records. Use the manufacturer pin-description table and land-pattern drawing to assign PCB tracks and confirm the exposed-pad connection requirements before layout release.
Where can I download the MCP3562T-E/NC datasheet PDF?
The authoritative starting point is the Microchip MCP3562 product page, which provides the family datasheet and supporting documentation. The device is also indexed in document repositories under the title describing two-, four-, and eight-channel, 153.6 kSPS low-noise 24-bit delta-sigma ADCs. When downloading from a document mirror, verify the revision and part-number coverage against the Microchip product page.
What is the difference between MCP3562T-E/NC and MCP3562RT-E/NC?
MCP3562RT-E/NC is a pin-compatible MCP3562 variant identified as the preferred option for new designs by the Microchip product page. It adds an onboard voltage reference that the MCP3562T-E/NC does not include, reducing the need for an external reference source. Both devices are listed in 20-UQFN 3 x 3 mm packages, but firmware configuration and reference-circuit review are still required before interchange.
Can MCP3562RT-E/NC replace MCP3562T-E/NC as a drop-in part?
Yes, MCP3562RT-E/NC is a pin-compatible replacement for MCP3562T-E/NC and is the manufacturer-preferred choice for new designs. The principal functional difference is the integrated voltage reference, which the MCP3562 lacks. Confirm software settings, reference accuracy requirements, and board-level decoupling against the manufacturer documentation before releasing the substitution for production.
When should I choose MCP3562T-E/NC instead of MCP3562RT-E/NC?
Choose MCP3562T-E/NC when the design already uses an accurate external reference and you do not need the R-version onboard reference. Choose MCP3562RT-E/NC when an integrated reference simplifies the analog front end or matches a newer reference design. Both occupy the same 20-UQFN footprint, but the missing internal reference in MCP3562T-E/NC is a functional, not a mechanical, difference.
What is the best drop-in replacement for MCP3562T-E/NC?
MCP3562RT-E/NC is the best documented pin-compatible option because Microchip identifies it as a preferred, pin-compatible choice for new designs and uses the same 20-UQFN 3 x 3 mm package. Its onboard voltage reference differs functionally from MCP3562T-E/NC. Review the reference implementation and conversion configuration before treating it as a production substitute.
Is MCP3562T-E/NC the same as MCP3562RT-E/NC?
They are not electrically identical, although they share the same package and pin compatibility. MCP3562RT-E/NC includes an onboard voltage reference, while MCP3562T-E/NC requires an external reference. Microchip specifically recommends the R version for new designs, so existing boards may retain MCP3562T-E/NC while new boards use MCP3562RT-E/NC after configuration verification.
What can replace MCP3562T-E/NC in an existing PCB design?
MCP3562RT-E/NC is the documented same-package replacement for MCP3562T-E/NC. Because the two devices differ in reference integration, verify the external reference network, firmware register settings, and startup behavior in the manufacturer documentation. No confirmed cross-brand drop-in replacement is identified for this exact 20-UQFN device, so a cross-brand substitution should not be assumed without a complete electrical review.
Is there a Microchip equivalent for MCP3562T-E/NC?
Microchip Technology lists MCP3562RT-E/NC as a preferred, pin-compatible option for new designs of the MCP3562. It uses the same 20-UQFN 3 x 3 mm package and adds an onboard voltage reference. The Microchip cross-reference tools can also evaluate additional variants, but the R-version is the clearly documented equivalent for this footprint.
Where can I buy MCP3562T-E/NC online?
Use the Request a Quote form on this page to request MCP3562T-E/NC pricing, stock confirmation, and current lead time from XAIPART. The form routes the request through the appropriate supply channel and keeps the commercial response attached to the exact 20-UQFN part number. Quote-based fulfillment is used when live inventory and lead time are not confirmed at the time of inquiry.
What is the price of MCP3562T-E/NC?
Current pricing for MCP3562T-E/NC is provided through the Request a Quote form on this page rather than a static price list. Submit the target quantity, required package form, and production schedule with your request so the current commercial terms can be returned against the exact MCP3562T-E/NC ordering code.
What is the lead time and minimum order quantity for MCP3562T-E/NC?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time depends on manufacturer inventory, quantity breaks, and the requested delivery schedule. The MCP3562T-E/NC ordering code includes the 3 x 3 mm 20-UQFN package configuration, so include that full code in the request to avoid ambiguity.
What are the key specifications of MCP3562T-E/NC that engineers should know?
The MCP3562T-E/NC is a 24-bit sigma-delta ADC with a maximum rate of 153.6 kSPS, two differential or four single-ended inputs, and a 3 V supply. It is housed in a 20-pin UQFN measuring 3 x 3 mm. These figures make it well suited to low-level analog sensors where multi-channel flexibility, high numerical resolution, and compact board area are the primary design requirements.
Does MCP3562T-E/NC need an external voltage reference?
Yes, the MCP3562T-E/NC does not include the onboard voltage reference found in MCP3562RT-E/NC. The Microchip MCP3562 product page states that the R version adds the reference, which confirms its absence in the base MCP3562. Use the manufacturer reference-circuit requirements to select the reference voltage, source impedance, and filtering network.

بيانات مرجعية هندسية لـ MCP3562T-E/NC — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Select MCP3562T-E/NC when an existing design uses an external precision reference and requires the original MCP3562 configuration. It provides 24-bit resolution, two differential or four single-ended inputs, and rates up to 153.6 kSPS in a compact 20-UQFN package. Select MCP3562RT-E/NC for new designs when an integrated voltage reference and manufacturer-preferred pin compatibility are more valuable than retaining the original reference network. MCP3562R-E/NC is another same-family pin-compatible option, but its exact ordering, temperature, and reference configuration must be confirmed before release. No cross-brand drop-in device is established for this exact footprint, so board changes and digital-interface differences make an unverified substitute risky.

المقارنة مع البدائل

المعامل هذا المنتج MCP3562RT-E/NC MCP3562R-E/NC
Brand Microchip Technology Microchip Technology Microchip Technology
Package 20-UQFN (3x3 mm) 20-UQFN (3x3 mm) 20-UQFN (3x3 mm)
Resolution 24 bits 24 bits 24 bits
Maximum Conversion Rate 153.6 kSPS 153.6 kSPS 153.6 kSPS
Input Configuration 2 differential / 4 single-ended 2 differential / 4 single-ended 2 differential / 4 single-ended
Supply Voltage 3 V 3 V 3 V
Onboard Voltage Reference No Yes Yes
Conversion Architecture Sigma-delta Sigma-delta Sigma-delta

أبرز الفروقات

  • Manufacturer-preferred pin-compatible upgrade path (مقابلMCP3562RT-E/NC)
  • Dual differential and quad single-ended channel flexibility (مقابلMCP3562R-E/NC)
  • High-resolution conversion with selectable throughput (مقابلMCP3562RT-E/NC)

ملاحظات التصميم

Route the two differential inputs as closely matched pairs, avoiding switching nodes, relay contacts, and high-current return paths. Keep the input amplifier or sensor interface physically close to the converter, and provide a quiet return path for the reference and analog ground domains. When a sensor source is high impedance, verify settling behavior against the selected output data rate and digital filter configuration.

Treat the external reference as a precision analog supply because reference error scales the measured code. Place the reference bypass network close to the reference pins, use a low-noise reference source, and isolate the reference route from digital return currents. MCP3562T-E/NC requires this external reference arrangement, while MCP3562RT-E/NC provides an onboard reference option for new designs.

Do not assume that equal pin counts guarantee identical conversion behavior during a substitution. The R-version MCP3562 adds an onboard voltage reference and is the manufacturer-preferred option for new designs, so review startup timing, reference configuration, gain calibration, and firmware settings. Confirm the complete ordering code, package drawing, and exposed-pad requirements before approving any replacement.

Select the output data rate and digital-filter bandwidth together. Increasing the conversion rate without accounting for filter settling can reduce effective noise performance and create aliasing in multiplexed single-ended systems. Acquire at an adequate rate relative to the signal bandwidth, and verify conversion timing in the Microchip serial-interface configuration used by the design.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The MCP3562T-E/NC is a 3 V industrial analog-to-digital converter. Use the manufacturer product page and current material-compliance declarations for RoHS, REACH, and halogen-free status.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MCP3562T-E/NC MCP3562T-E/NC datasheet MCP3562T-E/NC datasheet pdf MCP3562T-E/NC pinout MCP3562T-E/NC equivalent MCP3562T-E/NC replacement MCP3562T-E/NC cross reference MCP3562T-E/NC vs MCP3562RT-E/NC MCP3562T-E/NC price MCP3562T-E/NC stock Microchip MCP3562T-E/NC MCP3562 24-bit ADC 153.6 kSPS MCP3562 20-UQFN ADC MCP3562T-E/NC load cell amplifier MCP3562T-E/NC pressure sensor interface

المكونات والمصطلحات ذات الصلة

Microchip Technology MCP3562T-E/NC MCP3562RT-E/NC MCP3562R-E/NC MCP3562 analog-to-digital converter ADC delta-sigma ADC sigma-delta converter 24-bit resolution 153.6 kSPS differential input single-ended input voltage regulator power management IC semiconductor 20-UQFN QFN package family surface-mount package SMD external voltage reference programmable data rate digital filter load-cell measurement industrial process sensing
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر