Microchip Technology

MCP6023-I/SN - 10MHz R-R I/O Op Amp | Microchip

MPN: MCP6023-I/SN ✓ نشط
Less than 0.5 mV Vdss 1.0 mA Id 8-pin SOIC Package
الحد الأدنى للطلب: 1 |

MCP6023-I/SN نظرة عامة

The Microchip Technology MCP6023-I/SN is a single, general-purpose CMOS operational amplifier with a 10 MHz gain-bandwidth product, 1.0 mA typical operating current, and less than 0.5 mV offset voltage, housed in an 8-pin SOIC package. It supports rail-to-rail input and output operation and operates from a 2.5 V to 5.5 V single supply.

A rail-to-rail input/output operational amplifier is a general-purpose amplifier whose input common-mode range and output voltage swing extend close to the positive and negative supply rails. The MCP6023 belongs to the operational-amplifier hierarchy, where it serves as a low-power analog signal-conditioning building block for amplification, filtering, buffering, comparison, and transducer-interface circuits.

The device combines a 10 MHz gain-bandwidth product with 1.0 mA typical operating current, making it suitable for low-power signal chains that require more bandwidth than low-frequency precision amplifiers. Its rail-to-rail input reduces supply-headroom constraints when sensing small signals, while the rail-to-rail output improves output utilization in single-supply systems. Input offset voltage below 0.5 mV supports accurate amplification of low-level signals.

The MCP6023 uses Microchip's advanced CMOS process and provides low bias current, high open-loop gain, high-speed operation, and rail-to-rail output swing. Because the MCP6023-I/SN is a single amplifier, it offers a straightforward package option for designs requiring one independently biased amplifier rather than a multi-channel device. The -I grade and -SN package suffix identify the temperature and package configuration associated with this ordering code.

Typical uses include sensor-signal conditioning, low-level analog measurement, active filtering, audio and communications interface stages, portable instrumentation, and buffered voltage rails. In a transimpedance or voltage-amplifier stage, the 10 MHz bandwidth provides useful bandwidth for signals above the audio range. In battery-powered equipment, the 1.0 mA typical operating current helps limit static power demand while retaining substantially more speed than many micropower amplifiers.

Designers should verify the input and output signal ranges against the actual supply voltage and common-mode limits in the manufacturer datasheet. The input network must also account for amplifier bias current and source resistance, particularly in high-impedance sensor circuits. Decoupling capacitors should be placed close to the supply and ground pins, and the unused amplifier in a dual or quad family would require proper input treatment.

This product page combines the manufacturer specifications with practical application guidance, sourcing details, and same-package replacement analysis. It helps engineers evaluate the MCP6023-I/SN against the MCP6023T-I/SN where temperature-grade or packaging requirements differ while preserving the fundamental electrical characteristics and 8-pin SOIC footprint.

بدائل مباشرة لـ MCP6023-I/SN — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

MCP6023T-I/SN

✅ بديل مباشر
📦 8-pin SOIC
Same 10 MHz gain-bandwidth product, 1.0 mA typical operating current, and less-than-0.5 mV offset voltage; ordering suffix indicates a different temperature or device configuration.

📋 بديل مرجعي (غير موجود في الكتالوج)

MCP6023-I/SN الحدود القصوى والخصائص الكهربائية

Amplifier Type Single general-purpose operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 10 MHz
Typical Operating Current 1.0 mA
Input Offset Voltage Less than 0.5 mV
Minimum Supply Voltage 2.5 V
Maximum Supply Voltage 5.5 V
Supply Type Single
Input Swing Rail-to-rail
Output Swing Rail-to-rail
Process Technology Advanced CMOS
العلبة 8-pin SOIC
نوع التركيب Surface mount
Automotive Qualification AEC-Q100 indicated by distributor product listing

دليل تكوين أطراف MCP6023-I/SN 8-pin soic

تكوين الأطراف لـ MCP6023-I/SN (حزمة 8-pin soic). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 8-pin soic لـ MCP6023-I/SN

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MCP6023-I/SN.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MCP6023-I/SN مناسب لـ 6 التطبيقs: Low-Power Sensor Signal Conditioning, Portable Instrumentation Front End, Active Filtering and Signal Conditioning, Industrial Control Signal Interface, Communication Interface Buffering, Audio and Low-Level Analog Preamplification.

🧩

Low-Power Sensor Signal Conditioning

The MCP6023-I/SN suits sensor-amplifier stages that operate from a single 2.5 V to 5.5 V rail and need an input close to the signal source. Its less-than-0.5 mV input offset voltage limits DC error when conditioning small sensor outputs, while the 10 MHz gain-bandwidth product provides useful bandwidth for filtering and gain stages. The 1.0 mA typical operating current also helps control power in portable or distributed sensing systems. Confirm common-mode range, input bias current, and noise against the sensor impedance before fixing the feedback network.

📱

Portable Instrumentation Front End

The MCP6023-I/SN can provide the first gain stage in a handheld measurement instrument where both analog bandwidth and battery life matter. Its 10 MHz gain-bandwidth product supports signal paths beyond the audio range, while the 1.0 mA typical current reduces amplifier contribution to static supply demand. Rail-to-rail input and output operation improves usable range in low-voltage designs. For accurate acquisition, pair the amplifier with suitable input protection, reference circuitry, and an anti-alias filter whose corner frequency is selected from the required measurement bandwidth.

⚡

Active Filtering and Signal Conditioning

The MCP6023-I/SN is appropriate for first-order and higher-order active-filter stages requiring a compact, low-power operational amplifier. Its 10 MHz gain-bandwidth product leaves useful bandwidth above common audio and control-signal frequencies, and the rail-to-rail output helps preserve amplitude with low-voltage supplies. The less-than-0.5 mV offset specification can be important in low-frequency filters because offset may shift the effective DC operating point. Component tolerances, amplifier gain error, and the complete filter response should be evaluated together rather than inferred from bandwidth alone.

🏭

Industrial Control Signal Interface

The MCP6023-I/SN can amplify and buffer low-level control signals in compact industrial equipment operating from a single rail up to 5.5 V. Its 1.0 mA typical current fits low-power analog sections, while 10 MHz bandwidth accommodates control loops and diagnostic signals that do not require a high-speed precision amplifier. Rail-to-rail input capability reduces the need to bias signals near mid-supply. The final design must include transient protection, grounding that separates high-current return paths, and verified operating-temperature limits for the installed enclosure.

🌐

Communication Interface Buffering

The MCP6023-I/SN is useful as an analog buffer or gain stage in communication equipment requiring a 10 MHz-class amplifier without the power demand of a high-speed part. The rail-to-rail output swing can preserve signal amplitude on low-voltage rails, and the low typical operating current benefits compact interface circuitry. Place the amplifier close to the protected analog section and use the shortest practical feedback path to reduce parasitic effects. Confirm slew rate, output drive, capacitive-load stability, and noise using the manufacturer datasheet for the exact operating conditions.

🎧

Audio and Low-Level Analog Preamplification

The MCP6023-I/SN can serve as a low-level preamplifier in audio, communication, or instrumentation circuits that remain below its 10 MHz gain-bandwidth limit. Rail-to-rail input and output operation improves signal utilization from a single supply, and the 1.0 mA typical current is attractive for low-power audio products. The less-than-0.5 mV input offset can reduce low-level DC error, although input-referred noise and total harmonic distortion must be checked against the required audio performance. Use stable feedback resistors and a topology that preserves the amplifier's stability with the selected source and load impedances.

ملخص المنتجات الموصى بها

MCP6023-I/SN Microchip Technology يُستخدم في: Low-Power Sensor Signal Conditioning, Portable Instrumentation Front End, Active Filtering and Signal Conditioning, Industrial Control Signal Interface, Communication Interface Buffering, Audio and Low-Level Analog Preamplification MCP6023T-I/SN Same-family alternative configuration يُستخدم في: Low-Power Sensor Signal Conditioning, Portable Instrumentation Front End, Active Filtering and Signal Conditioning, Industrial Control Signal Interface, Communication Interface Buffering, Audio and Low-Level Analog Preamplification MCP6023 Manufacturer family reference يُستخدم في: Low-Power Sensor Signal Conditioning, Portable Instrumentation Front End, Active Filtering and Signal Conditioning, Industrial Control Signal Interface, Communication Interface Buffering, Audio and Low-Level Analog Preamplification
What are the key specifications of MCP6023-I/SN that engineers should know?
The MCP6023-I/SN is a single 10 MHz rail-to-rail input/output operational amplifier operating from 2.5 V to 5.5 V with 1.0 mA typical operating current. According to the Microchip Technology MCP6023 product page, its input offset voltage is less than 0.5 mV. The device uses advanced CMOS technology and is packaged in an 8-pin SOIC, making it suitable for low-power amplification, filtering, buffering, and sensor-interface circuits.
Where can I download the MCP6023-I/SN datasheet PDF?
The official MCP6023-I/SN datasheet is available through the Microchip Technology MCP6023 product page at https://www.microchip.com/en-us/product/MCP6023. The page provides manufacturer documentation and supporting technical information for the MCP6023 family. For PCB implementation, use the pin-description table and package drawing in the manufacturer datasheet rather than relying on distributor listings, which may omit individual pin functions.
Where can I find the MCP6023-I/SN pinout?
The MCP6023-I/SN pinout is found in the pin-description table and package drawing in the Microchip Technology MCP6023 documentation. The device is an 8-pin SOIC, but the complete pin names are not reproduced on this page. Use the manufacturer datasheet to confirm the numbering of the non-inverting input, inverting input, output, supply, and ground connections before laying out or modifying a PCB.
Is MCP6023-I/SN suitable for rail-to-rail single-supply operation?
Yes, the MCP6023-I/SN supports rail-to-rail input and output operation from a single 2.5 V to 5.5 V supply. According to the Microchip Technology MCP6023 product page, the CMOS implementation provides rail-to-rail output swing and low bias current. This is useful for signal conditioning near either supply rail, although input and output limits must still be checked for operating temperature and output load.
What can replace MCP6023-I/SN on the same 8-pin SOIC footprint?
The MCP6023T-I/SN is the documented same-package option in the available cross-reference information, using the same 8-pin SOIC format and the same 10 MHz, 1.0 mA, and less-than-0.5 mV headline characteristics. Microchip Technology MCP6023T-I/SN is sourced from web data. Review its temperature grade and ordering suffix in the manufacturer documentation before using it as a production substitute.
MCP6023-I/SN vs MCP6023T-I/SN — which is better for an industrial design?
The MCP6023T-I/SN is the better fit when the alternative ordering configuration provides the required temperature grade, while the MCP6023-I/SN should be selected when its specified grade satisfies the product requirements. Both are Microchip Technology devices in the 8-pin SOIC family with a 10 MHz gain-bandwidth product and 1.0 mA typical operating current. The decisive qualification is operating-temperature coverage, not bandwidth.
When should I choose MCP6023-I/SN over a higher-speed amplifier?
Choose the MCP6023-I/SN when a 10 MHz gain-bandwidth product is sufficient and low operating current is more valuable than maximum bandwidth. Its 1.0 mA typical current supports compact, low-power analog circuitry while the rail-to-rail input and output improve signal range in single-supply designs. Select a faster amplifier instead when slew rate, settling behavior, or signal bandwidth requirements exceed the MCP6023 capabilities.
Is MCP6023-I/SN suitable for sensor signal conditioning?
Yes, the MCP6023-I/SN fits low-level sensor signal conditioning because it provides less than 0.5 mV input offset voltage, 10 MHz gain-bandwidth product, and rail-to-rail input capability. According to the Microchip Technology product page, low bias current supports use with higher-impedance sources. Choose the input resistor and compensation network around the sensor bandwidth and source impedance rather than treating the amplifier bandwidth as the complete system response.
How much power does MCP6023-I/SN consume at a 3.3 V supply?
Estimated: at a 3.3 V supply and 1.0 mA typical operating current, the amplifier consumes approximately 3.3 mW of supply power. This is a calculation using the 3.3 V operating voltage and the 1.0 mA typical current specified by Microchip Technology, not a maximum-power datasheet figure. Actual current and dissipation vary with supply voltage, output loading, frequency, and operating temperature.
Where to buy MCP6023-I/SN online?
Use the Request a Quote form on this page to request MCP6023-I/SN availability, order quantity, and current commercial terms. The form is the direct route for sourcing this exact 8-pin SOIC ordering code. Engineers should specify the required quantity and packaging configuration so that the manufacturer part number MCP6023-I/SN remains unchanged through quotation and fulfillment.
What is the price of MCP6023-I/SN?
Current commercial pricing for MCP6023-I/SN is handled through the Request a Quote form on this page because quotations and component availability can change with quantity and packaging. Submit the exact MPN, target quantity, and delivery requirements to obtain current terms. This avoids substituting a different temperature grade, tape-and-reel code, or tube-packaged configuration without your approval.
What is the lead time and stock status for MCP6023-I/SN?
Request the current lead time and stock status for MCP6023-I/SN through the Request a Quote form on this page. The manufacturer lists the MCP6023 family, but a real-time stock commitment should be confirmed for the exact ordering code and required quantity. Include your manufacturing schedule and acceptable incoming date so the quotation can reflect a practical delivery plan.
Is MCP6023-I/SN compliant with automotive AEC-Q100 requirements?
A distributor product listing identifies MCP6023-I/SN with Automotive AEC-Q100, but engineers should treat that as a sourcing indication and verify the exact qualification record in Microchip Technology documentation before release. Automotive qualification may depend on the complete orderable MPN and grade. The manufacturer product page and the applicable device qualification documents are the controlling sources for production compliance.
Can MCP6023-I/SN be used in active filters and audio preamplifiers?
Yes, the MCP6023-I/SN can be used in active filters and audio preamplifiers when the desired signal bandwidth remains below its 10 MHz gain-bandwidth product. Its 1.0 mA typical operating current supports low-power analog stages, and rail-to-rail output swing provides useful voltage range on a single supply. Set gain-bandwidth, slew-rate, noise, and output-load requirements against the detailed datasheet limits before finalizing the stage.
What are the differences between MCP6023-I/SN and MCP6023T-I/SN?
The available information identifies both MCP6023-I/SN and MCP6023T-I/SN as Microchip Technology 8-pin SOIC devices with 10 MHz gain-bandwidth product, 1.0 mA typical operating current, and input offset voltage below 0.5 mV. Their ordering suffixes identify different device configurations. Confirm the temperature grade, qualification status, and packing requirements in the manufacturer documentation before treating one as the drop-in replacement for the other.

بيانات مرجعية هندسية لـ MCP6023-I/SN — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MCP6023-I/SN for a low-power single-supply analog design that needs rail-to-rail input/output operation, a 10 MHz gain-bandwidth product, and 1.0 mA typical operating current. It is well suited to sensor conditioning, active filtering, buffering, and portable instrumentation where 2.5 V to 5.5 V operation provides useful range. MCP6023T-I/SN is the close same-package family choice when its ordering suffix provides the required temperature or device configuration; verify those details in Microchip documentation before substitution. No additional pin-compatible alternatives were established by the available cross-reference results, so alternatives requiring a different footprint, pin arrangement, or electrical function should not be treated as drop-in replacements. For designs requiring greater bandwidth, lower offset, lower noise, rail-to-rail input and output simultaneously under different conditions, or an automotive qualification specific to another grade, review the full family specifications before final selection.

المقارنة مع البدائل

المعامل هذا المنتج MCP6023T-I/SN
Brand Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC
Amplifier Type General-purpose operational amplifier General-purpose operational amplifier
Number of Circuits 1 circuit 1 circuit
Gain-Bandwidth Product 10 MHz 10 MHz
Typical Operating Current 1.0 mA 1.0 mA
Input Offset Voltage Less than 0.5 mV Less than 0.5 mV
Supply Voltage Range 2.5 V to 5.5 V single supply 2.5 V to 5.5 V single supply
Input and Output Swing Rail-to-rail input/output Rail-to-rail input/output
Process Technology Advanced CMOS Advanced CMOS
Mounting Type Surface mount Surface mount
Price Tier Request a Quote Request a Quote

أبرز الفروقات

  • Combines 10 MHz bandwidth with low typical operating current (مقابلMCP6023T-I/SN)
  • Rail-to-rail input and output operation supports single-supply signal ranges (مقابلMCP6023T-I/SN)
  • Low input offset voltage for small-signal conditioning (مقابلMCP6023T-I/SN)

ملاحظات التصميم

Route the input, feedback, and output paths compactly and keep the amplifier away from switching nodes and high-current return paths. Place supply bypass capacitors close to the device power and ground pins, and use a quiet ground reference for analog signals. The manufacturer datasheet should be used to confirm the exact 8-pin SOIC numbering before making PCB changes. For gain-of-one or non-inverting stages, preserve the recommended feedback topology and avoid long unprotected input traces.

Do not treat 10 MHz as the usable closed-loop bandwidth for every gain setting; closed-loop bandwidth decreases as gain increases. Check output swing, slew rate, load capability, and common-mode limits under the intended supply and temperature conditions. A single-supply design also needs a defined bias point for bipolar input signals, and an unused input should be tied to a defined common-mode potential rather than left floating.

For sensor and high-impedance sources, account for input bias current flowing through source resistance and for capacitance formed by long PCB traces. Keep the feedback resistor values high enough for the required bandwidth but low enough to limit parasitic sensitivity, and verify the resulting noise and bias-current error. For higher-speed or capacitively loaded outputs, compare the load and edge-rate requirements with the stability guidance in the manufacturer documentation.

Estimated: with a 3.3 V supply and the specified 1.0 mA typical operating current, the amplifier's supply power is approximately 3.3 mW. Use the typical current only for an initial estimate because output load, frequency, and process variation affect actual consumption. In a battery design, include the complete analog rail's load and regulator quiescent current, and provide a local bypass path so amplifier switching activity does not create supply ripple at the source.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

A distributor listing identifies the MCP6023-I/SN with Automotive AEC-Q100. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation for the exact ordering code.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

mcp6023 datasheet MCP6023-I/SN datasheet MCP6023-I/SN pinout MCP6023-I/SN equivalent MCP6023-I/SN replacement MCP6023-I/SN drop-in replacement MCP6023-I/SN application circuit MCP6023-I/SN 10MHz amplifier MCP6023-I/SN 8-SOIC MCP6023-I/SN price MCP6023-I/SN stock Microchip MCP6023-I/SN

المكونات والمصطلحات ذات الصلة

Microchip Technology MCP6023-I/SN MCP6023T-I/SN MCP6023 operational amplifier op amp general-purpose amplifier rail-to-rail input rail-to-rail output CMOS gain-bandwidth product input offset voltage operating current single-supply operation 8-pin SOIC SOIC family surface-mount package sensor signal conditioning active filter portable instrumentation AEC-Q100 semiconductor analog signal conditioning voltage amplifier
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر