MCP6023-I/SN - 10MHz R-R I/O Op Amp | Microchip
MPN: MCP6023-I/SN ✓ NakahandaMCP6023-I/SN Ulas
A rail-to-rail input/output operational amplifier is a general-purpose amplifier whose input common-mode range and output voltage swing extend close to the positive and negative supply rails. The MCP6023 belongs to the operational-amplifier hierarchy, where it serves as a low-power analog signal-conditioning building block for amplification, filtering, buffering, comparison, and transducer-interface circuits.
The device combines a 10 MHz gain-bandwidth product with 1.0 mA typical operating current, making it suitable for low-power signal chains that require more bandwidth than low-frequency precision amplifiers. Its rail-to-rail input reduces supply-headroom constraints when sensing small signals, while the rail-to-rail output improves output utilization in single-supply systems. Input offset voltage below 0.5 mV supports accurate amplification of low-level signals.
The MCP6023 uses Microchip's advanced CMOS process and provides low bias current, high open-loop gain, high-speed operation, and rail-to-rail output swing. Because the MCP6023-I/SN is a single amplifier, it offers a straightforward package option for designs requiring one independently biased amplifier rather than a multi-channel device. The -I grade and -SN package suffix identify the temperature and package configuration associated with this ordering code.
Typical uses include sensor-signal conditioning, low-level analog measurement, active filtering, audio and communications interface stages, portable instrumentation, and buffered voltage rails. In a transimpedance or voltage-amplifier stage, the 10 MHz bandwidth provides useful bandwidth for signals above the audio range. In battery-powered equipment, the 1.0 mA typical operating current helps limit static power demand while retaining substantially more speed than many micropower amplifiers.
Designers should verify the input and output signal ranges against the actual supply voltage and common-mode limits in the manufacturer datasheet. The input network must also account for amplifier bias current and source resistance, particularly in high-impedance sensor circuits. Decoupling capacitors should be placed close to the supply and ground pins, and the unused amplifier in a dual or quad family would require proper input treatment.
This product page combines the manufacturer specifications with practical application guidance, sourcing details, and same-package replacement analysis. It helps engineers evaluate the MCP6023-I/SN against the MCP6023T-I/SN where temperature-grade or packaging requirements differ while preserving the fundamental electrical characteristics and 8-pin SOIC footprint.
Mga alternatibo na pwedeng ilagay na MCP6023-I/SN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
MCP6023T-I/SN
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MCP6023-I/SN Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | Single general-purpose operational amplifier |
| Number of Circuits | 1 circuit |
| Gain-Bandwidth Product | 10 MHz |
| Typical Operating Current | 1.0 mA |
| Input Offset Voltage | Less than 0.5 mV |
| Minimum Supply Voltage | 2.5 V |
| Maximum Supply Voltage | 5.5 V |
| Supply Type | Single |
| Input Swing | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Process Technology | Advanced CMOS |
| Packhaging | 8-pin SOIC |
| Uri ng Pagpapasok | Surface mount |
| Automotive Qualification | AEC-Q100 indicated by distributor product listing |
Gabay sa Pin Configuration ng MCP6023-I/SN 8-pin soic
Pin configuration para sa MCP6023-I/SN (8-pin soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa MCP6023-I/SN.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MCP6023-I/SN ay nararapat para sa 6 aplikasyons: Low-Power Sensor Signal Conditioning, Portable Instrumentation Front End, Active Filtering and Signal Conditioning, Industrial Control Signal Interface, Communication Interface Buffering, Audio and Low-Level Analog Preamplification.
Low-Power Sensor Signal Conditioning
The MCP6023-I/SN suits sensor-amplifier stages that operate from a single 2.5 V to 5.5 V rail and need an input close to the signal source. Its less-than-0.5 mV input offset voltage limits DC error when conditioning small sensor outputs, while the 10 MHz gain-bandwidth product provides useful bandwidth for filtering and gain stages. The 1.0 mA typical operating current also helps control power in portable or distributed sensing systems. Confirm common-mode range, input bias current, and noise against the sensor impedance before fixing the feedback network.
Inirekomenda
Portable Instrumentation Front End
The MCP6023-I/SN can provide the first gain stage in a handheld measurement instrument where both analog bandwidth and battery life matter. Its 10 MHz gain-bandwidth product supports signal paths beyond the audio range, while the 1.0 mA typical current reduces amplifier contribution to static supply demand. Rail-to-rail input and output operation improves usable range in low-voltage designs. For accurate acquisition, pair the amplifier with suitable input protection, reference circuitry, and an anti-alias filter whose corner frequency is selected from the required measurement bandwidth.
Inirekomenda
Active Filtering and Signal Conditioning
The MCP6023-I/SN is appropriate for first-order and higher-order active-filter stages requiring a compact, low-power operational amplifier. Its 10 MHz gain-bandwidth product leaves useful bandwidth above common audio and control-signal frequencies, and the rail-to-rail output helps preserve amplitude with low-voltage supplies. The less-than-0.5 mV offset specification can be important in low-frequency filters because offset may shift the effective DC operating point. Component tolerances, amplifier gain error, and the complete filter response should be evaluated together rather than inferred from bandwidth alone.
Inirekomenda
Industrial Control Signal Interface
The MCP6023-I/SN can amplify and buffer low-level control signals in compact industrial equipment operating from a single rail up to 5.5 V. Its 1.0 mA typical current fits low-power analog sections, while 10 MHz bandwidth accommodates control loops and diagnostic signals that do not require a high-speed precision amplifier. Rail-to-rail input capability reduces the need to bias signals near mid-supply. The final design must include transient protection, grounding that separates high-current return paths, and verified operating-temperature limits for the installed enclosure.
Inirekomenda
Communication Interface Buffering
The MCP6023-I/SN is useful as an analog buffer or gain stage in communication equipment requiring a 10 MHz-class amplifier without the power demand of a high-speed part. The rail-to-rail output swing can preserve signal amplitude on low-voltage rails, and the low typical operating current benefits compact interface circuitry. Place the amplifier close to the protected analog section and use the shortest practical feedback path to reduce parasitic effects. Confirm slew rate, output drive, capacitive-load stability, and noise using the manufacturer datasheet for the exact operating conditions.
Inirekomenda
Audio and Low-Level Analog Preamplification
The MCP6023-I/SN can serve as a low-level preamplifier in audio, communication, or instrumentation circuits that remain below its 10 MHz gain-bandwidth limit. Rail-to-rail input and output operation improves signal utilization from a single supply, and the 1.0 mA typical current is attractive for low-power audio products. The less-than-0.5 mV input offset can reduce low-level DC error, although input-referred noise and total harmonic distortion must be checked against the required audio performance. Use stable feedback resistors and a topology that preserves the amplifier's stability with the selected source and load impedances.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MCP6023-I/SN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MCP6023T-I/SN |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 8-pin SOIC | 8-pin SOIC |
| Amplifier Type | General-purpose operational amplifier | General-purpose operational amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 10 MHz | 10 MHz |
| Typical Operating Current | 1.0 mA | 1.0 mA |
| Input Offset Voltage | Less than 0.5 mV | Less than 0.5 mV |
| Supply Voltage Range | 2.5 V to 5.5 V single supply | 2.5 V to 5.5 V single supply |
| Input and Output Swing | Rail-to-rail input/output | Rail-to-rail input/output |
| Process Technology | Advanced CMOS | Advanced CMOS |
| Mounting Type | Surface mount | Surface mount |
| Price Tier | Request a Quote | Request a Quote |
Pangunahing mga Pagkakaiba
- Combines 10 MHz bandwidth with low typical operating current (kumpara saMCP6023T-I/SN)
- Rail-to-rail input and output operation supports single-supply signal ranges (kumpara saMCP6023T-I/SN)
- Low input offset voltage for small-signal conditioning (kumpara saMCP6023T-I/SN)
Talaan ng Disenyo
Route the input, feedback, and output paths compactly and keep the amplifier away from switching nodes and high-current return paths. Place supply bypass capacitors close to the device power and ground pins, and use a quiet ground reference for analog signals. The manufacturer datasheet should be used to confirm the exact 8-pin SOIC numbering before making PCB changes. For gain-of-one or non-inverting stages, preserve the recommended feedback topology and avoid long unprotected input traces.
Do not treat 10 MHz as the usable closed-loop bandwidth for every gain setting; closed-loop bandwidth decreases as gain increases. Check output swing, slew rate, load capability, and common-mode limits under the intended supply and temperature conditions. A single-supply design also needs a defined bias point for bipolar input signals, and an unused input should be tied to a defined common-mode potential rather than left floating.
For sensor and high-impedance sources, account for input bias current flowing through source resistance and for capacitance formed by long PCB traces. Keep the feedback resistor values high enough for the required bandwidth but low enough to limit parasitic sensitivity, and verify the resulting noise and bias-current error. For higher-speed or capacitively loaded outputs, compare the load and edge-rate requirements with the stability guidance in the manufacturer documentation.
Estimated: with a 3.3 V supply and the specified 1.0 mA typical operating current, the amplifier's supply power is approximately 3.3 mW. Use the typical current only for an initial estimate because output load, frequency, and process variation affect actual consumption. In a battery design, include the complete analog rail's load and regulator quiescent current, and provide a local bypass path so amplifier switching activity does not create supply ripple at the source.
Impormasyon ng Pagsunod sa Kautusan
A distributor listing identifies the MCP6023-I/SN with Automotive AEC-Q100. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation for the exact ordering code.