Microchip Technology

MCP6034-E/ST - 10kHz Quad Low-Power Op Amp | Microchip

MPN: MCP6034-E/ST ✓ نشط
1.8 V Vdss 900 nA Id 14-TSSOP, 0.173 in / 4.40 mm width Package
الحد الأدنى للطلب: 1 |

MCP6034-E/ST نظرة عامة

Microchip Technology MCP6034-E/ST is a quad general-purpose operational amplifier with 10 kHz gain-bandwidth product, 900 nA typical operating current per amplifier, and less than 150 uV input offset voltage. The device operates from a single supply as low as 1.8 V and provides rail-to-rail input and output swing in a 14-lead TSSOP package.

An operational amplifier, commonly called an op amp, is a high-gain analog building block used to amplify, buffer, filter, compare, and control voltage signals. The MCP6034 belongs to the precision-amplifier and linear-amplifier hierarchy, with emphasis on low power consumption and low offset. Its CMOS implementation supports portable, battery-powered, and space-constrained systems where four amplifier channels are useful without requiring four separate packages.

Key features include four amplifier circuits in one package, a 10 kHz typical gain-bandwidth product, 900 nA typical operating current, and less than 150 uV typical input offset voltage. The 1.8 V minimum single-supply operation supports low-voltage systems, while rail-to-rail input and output characteristics provide useful signal range in compact sensor and signal-conditioning circuits.

The MCP6034 family uses advanced CMOS technology to provide low bias current, high open-loop gain, and rail-to-rail operation. A gain-bandwidth product of 10 kHz makes the amplifier appropriate for slow analog signals rather than high-frequency waveform or video amplification. Unity-gain stability and the low-noise operating characteristics support buffering and precision feedback networks when component and layout conditions are controlled.

Typical applications include battery-powered sensor conditioning, portable medical instrumentation, industrial process measurement, low-current data acquisition, and four-channel transducer amplification. The integrated quad configuration also reduces board area by replacing four single amplifier packages while keeping channel routing and supply connections organized within one 14-TSSOP footprint.

For reliable operation, place input and output bypass capacitors close to their associated supply pins, route sensitive input signals away from switching nodes, and verify that the selected gain and phase margin remain stable at the intended signal frequency. The TSSOP body width of approximately 4.40 mm also requires assembly tooling and land patterns appropriate for that package dimension.

بدائل مباشرة لـ MCP6034-E/ST — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع MCP6034-E/ST (نفس عامل الشكل والبصمة) — يختلف في Amplifier Type, Package.

Microchip Technology
Amplifier Type: General Purpose
Package: 14-TSSOP, 4.40 mm width

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

MCP6034-E/ST الحدود القصوى والخصائص الكهربائية

Number of Amplifier Circuits 4 circuits
Amplifier Type General-purpose operational amplifier
Minimum Single-Supply Voltage 1.8 V
Typical Operating Current per Amplifier 900 nA
Typical Gain-Bandwidth Product 10 kHz
Typical Input Offset Voltage Less than 150 uV
Input Common-Mode Range Rail-to-rail input
Output Swing Rail-to-rail output
Technology Advanced CMOS
Typical Slew Rate 0.004 V/us
العلبة 14-TSSOP, 0.173 in / 4.40 mm width
Packaging Tube
نوع التركيب Surface mount
Operating Temperature Grade Extended temperature grade

دليل تكوين أطراف MCP6034-E/ST 14-tssop, 0.173 in / 4.40 mm width

تكوين الأطراف لـ MCP6034-E/ST (حزمة 14-tssop, 0.173 in / 4.40 mm width). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 14-tssop, 0.173 in / 4.40 mm width لـ MCP6034-E/ST

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MCP6034-E/ST.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

MCP6034-E/ST مناسب لـ 6 التطبيقs: Battery-Powered Sensor Conditioning, Portable Medical Instrumentation, Industrial Process Measurement, Low-Power Data Acquisition, Transducer Amplification, Precision Threshold Detection.

🔋

Battery-Powered Sensor Conditioning

The MCP6034-E/ST fits low-voltage sensor front ends where four analog channels must conserve board area and operating current. Its single-supply operation down to 1.8 V and 900 nA typical current per amplifier help limit power demand in portable monitors and environmental sensors. Rail-to-rail input and output swing can preserve signal range when supply headroom is limited. Each channel may buffer a resistive sensor or support a feedback-based gain stage, although the 10 kHz gain-bandwidth product is best suited to slow sensor signals. Confirm input bias current, common-mode limits, output loading, and settling requirements in the manufacturer datasheet before selecting external resistor values.

💊

Portable Medical Instrumentation

The MCP6034-E/ST is suitable for portable medical instrumentation requiring several low-power analog channels in a compact surface-mount package. Four integrated general-purpose amplifiers can handle electrode buffering, sensor interfaces, or threshold and drive stages when operating from a single low-voltage supply. The less-than-150 uV typical input offset specification is valuable when the system must preserve small signals, while 900 nA typical current per amplifier supports a low overall power budget. Because this MPN is not marked as an AEC-Q100-qualified automotive grade, medical suitability must be evaluated against the complete application requirements, including electrical isolation, leakage, calibration, and regulatory validation.

🏭

Industrial Process Measurement

The MCP6034-E/ST can support low-frequency industrial process-measurement circuits requiring multiple buffered inputs within a limited power envelope. Possible uses include amplifying outputs from pressure, temperature, and resistive sensors before conversion by an ADC. Rail-to-rail input and output operation is valuable when a 24 V industrial system is reduced to a low-voltage analog rail, while four channels reduce the number of separate amplifier packages. The 10 kHz gain-bandwidth product should be checked against the required signal bandwidth, and the chosen configuration must maintain stable feedback operation. Proper grounding, input filtering, and isolation from motor or relay switching equipment are essential for reliable process measurements.

📊

Low-Power Data Acquisition

The MCP6034-E/ST is appropriate for compact, low-speed data-acquisition front ends that must capture several analog channels without consuming substantial power. The four amplifier channels can buffer high-impedance sources before an external ADC, while unity-gain stability and rail-to-rail operation help simplify input-stage design around low-voltage supplies. A 10 kHz gain-bandwidth product supports slow-changing process, environmental, or laboratory signals rather than high-bandwidth waveform acquisition. Choose feedback resistors that preserve the required accuracy at the operating frequency, provide input protection appropriate to the source, and place bypass capacitors near the supply terminals. ADC acquisition time and source settling should be evaluated together.

🔧

Transducer Amplification

The MCP6034-E/ST can amplify the outputs of resistive and active transducers when each channel operates within the amplifier's input and output ranges. Four channels allow a compact instrument to condition bridge, strain-gauge, or resistive feedback signals without using four separate amplifier packages. The low typical offset of less than 150 uV is useful for preserving accuracy around the transducer's quiescent level, and the 900 nA typical current per amplifier is favorable for low-power instruments. Input bias current can create errors with high source impedance, so check that parameter in the manufacturer datasheet and select sensor impedances or biasing methods accordingly.

📺

Precision Threshold Detection

The MCP6034-E/ST can implement four independent comparator-style threshold stages when configured with suitable positive feedback in its linear operating region. Rail-to-rail input operation helps monitor signals near a low-voltage supply rail, and the four-channel package reduces the footprint compared with separate single amplifiers. The less-than-150 uV typical input offset can contribute to repeatable switching thresholds, although actual threshold accuracy also depends on resistor tolerances, output logic levels, temperature drift, and noise. Keep the gain-bandwidth requirement compatible with the 10 kHz product specification and verify output rise and fall behavior before using the amplifier as a fast logic substitute.

ملخص المنتجات الموصى بها

MCP6031-E/ST Single-amplifier member of the same low-power MCP6031/2/3/4 family يُستخدم في: Battery-Powered Sensor Conditioning, Portable Medical Instrumentation, Low-Power Data Acquisition, Transducer Amplification, Precision Threshold Detection MCP6032-E/ST Dual-amplifier member of the same low-power MCP6031/2/3/4 family يُستخدم في: Battery-Powered Sensor Conditioning, Portable Medical Instrumentation, Industrial Process Measurement, Low-Power Data Acquisition, Transducer Amplification, Precision Threshold Detection MCP6033-E/ST Low-power MCP6031/2/3/4 family amplifier option يُستخدم في: Battery-Powered Sensor Conditioning, Transducer Amplification MCP6034-E/ST Microchip Technology يُستخدم في: Industrial Process Measurement
What is the MCP6034-E/ST?
The MCP6034-E/ST is a Microchip Technology quad general-purpose operational amplifier with a 10 kHz gain-bandwidth product, 900 nA typical operating current per amplifier, and rail-to-rail input and output swing. According to the manufacturer product page, it uses advanced CMOS technology and can operate from a single supply as low as 1.8 V. The four amplifiers are integrated in a 14-lead TSSOP package, making the device suitable for compact low-power analog signal-conditioning systems.
What is the operating voltage of MCP6034-E/ST?
The MCP6034-E/ST operates from a single supply as low as 1.8 V. The manufacturer describes the MCP6034 as a low-power operational amplifier intended for portable and low-voltage systems. Rail-to-rail input and output operation allows useful signal swing near the supply rails, although the exact maximum supply voltage and detailed absolute maximum ratings should be confirmed in the manufacturer datasheet before final circuit design.
How much current does MCP6034-E/ST use?
The MCP6034-E/ST draws 900 nA of typical operating current per amplifier, equivalent to 3.6 uA when all four channels are operating under the typical family condition. The manufacturer product page identifies this ultra-low operating current as a defining feature of the MCP6034. Because total system current also includes load, bias-network, and external-circuit contributions, use the channel-level specification for amplifier comparisons rather than assuming the complete circuit consumes only 3.6 uA.
Where can I download the MCP6034-E/ST datasheet PDF?
The official MCP6034 product page at Microchip Technology provides the manufacturer documentation for the MCP6034-E/ST, and the family datasheet is the preferred document for pin assignments, electrical characteristics, and application guidance. Open the manufacturer page and select the datasheet download for the MCP6031/2/3/4 family. Use the package-specific pinout in that document when assigning all 14 TSSOP pins and checking the extended-temperature ordering information.
Where can I find the MCP6034-E/ST pinout?
The MCP6034-E/ST pinout is published in the Microchip MCP6031/2/3/4 family datasheet on the official MCP6034 product page. The device is packaged in 14-lead TSSOP, so verify all 14 terminal assignments against the package drawing before routing the PCB. Use the pin-description table to distinguish power, input, output, feedback, and no-connect terminals rather than relying only on a generic TSSOP outline.
What are the key specifications of MCP6034-E/ST that engineers should know?
The MCP6034-E/ST combines four amplifier channels, 10 kHz typical gain-bandwidth product, 900 nA typical operating current per amplifier, and less than 150 uV typical input offset voltage in one 14-TSSOP package. According to the Microchip product page, it also provides rail-to-rail input and output swing, advanced CMOS operation, low bias current, and high open-loop gain. These characteristics make it most relevant to low-voltage, low-power buffering and sensor-conditioning designs.
Can MCP6034-E/ST be used for sensor signal conditioning?
Yes, the MCP6034-E/ST is well suited to low-frequency sensor signal conditioning because it combines rail-to-rail input and output operation with low offset voltage and 900 nA typical current per amplifier. Place it after sensors whose output can operate within the amplifier's common-mode range, and verify the maximum input and output voltages in the manufacturer datasheet. Its 10 kHz gain-bandwidth product favors slow sensor signals rather than high-bandwidth measurement channels.
What is the difference between MCP6034-E/ST and MCP6032-E/SN?
The MCP6034-E/ST is a four-amplifier device in a 14-lead TSSOP package, while the comparison result identifies MCP6032-E/SN as a different MCP6031/2/3/4-family member with a different channel count and ordering/package code. The MCP6034 therefore offers four amplifiers in the specified TSSOP configuration. Use the family datasheet pin descriptions before considering the MCP6032 as a substitute because matching the family name alone does not establish identical channel count or package-side compatibility.
MCP6034-E/ST vs MCP6034-E/SL: which package should I choose?
The MCP6034-E/ST uses a 14-lead TSSOP package, whereas MCP6034-E/SL uses the SOIC package identified by the SL ordering code. Both belong to the low-power MCP6034 family, but their PCB land patterns are different. Choose MCP6034-E/ST for a TSSOP footprint and MCP6034-E/SL for an SOIC footprint; they are not direct drop-in replacements for one another without a board-layout change.
When should I choose MCP6034-E/ST over a single-amplifier package?
Choose MCP6034-E/ST when a design needs up to four low-frequency amplifier channels while minimizing package count and power consumption. Its four integrated amplifiers share one 14-TSSOP package, while the 900 nA typical current per amplifier helps preserve low total system demand. Choose a single amplifier instead when the design uses only one channel and needs a smaller package or a different power, bandwidth, precision, or rail-to-rail configuration.
Is MCP6034-E/ST suitable for battery-powered equipment?
Yes, the MCP6034-E/ST is suitable for battery-powered equipment because it supports a single supply as low as 1.8 V and has 900 nA typical operating current per amplifier. Its rail-to-rail input and output behavior can also improve usable signal range in low-voltage systems. Verify sensor output levels, shutdown requirements, leakage currents, and the complete power budget because the amplifier specification alone does not determine total battery life.
What can replace MCP6034-E/ST?
No confirmed drop-in replacement for MCP6034-E/ST is identified from the available cross-reference results. The MCP6034T-E/ST listing is a tape-and-reel ordering form of the same MCP6034 device, while MCP6034-E/SL uses a different package. Other MCP6031/2/3/4-family members can differ in channel count, and MCP6V34T-E/ST is a different amplifier family. Validate channel count, pin functions, voltage range, offset, bandwidth, current, package, and temperature grade before treating any candidate as a replacement.
Is there a Microchip cross-brand equivalent for MCP6034-E/ST?
No verified cross-brand drop-in equivalent for MCP6034-E/ST is established here. The available cross-reference pages provide tools for additional searching but do not identify a competitor part with the same 14-lead TSSOP land pattern and matching electrical behavior. A functional substitute is not automatically a drop-in replacement because amplifier channel count, pin functions, common-mode range, output swing, offset voltage, bandwidth, and operating current must all be checked against the manufacturer datasheet.
Where to buy MCP6034-E/ST online?
Use the Request a Quote form on this page to request MCP6034-E/ST availability, current commercial terms, and lead time. The manufacturer and distributor listings confirm the exact ordering code, but commercial conditions can change independently of technical specifications. Specify the required quantity and tube or tape-and-reel handling preference in the request, and confirm the authorized manufacturer part number and package before placing an order.
What is the lead time for MCP6034-E/ST?
The current MCP6034-E/ST lead time should be requested through the Request a Quote form on this page. Use the exact MPN MCP6034-E/ST and state the required quantity, packaging preference, and target delivery date. The technical family details do not determine factory lead time, and a distributor's inventory indication should not be interpreted as a guaranteed schedule for larger production quantities.
Is MCP6034-E/ST in stock?
Stock availability for MCP6034-E/ST should be confirmed through the Request a Quote form on this page. The MCP6034-E/ST listing reports an in-stock component, but that observation is not a reservation and may not cover the quantity or packaging required for a production order. Provide your required quantity, assembly method, and target schedule so the current supply position can be matched to the project.

بيانات مرجعية هندسية لـ MCP6034-E/ST — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose MCP6034-E/ST when the design needs four low-speed amplifier channels, a 1.8 V minimum single supply, and low typical current of 900 nA per amplifier in a 14-TSSOP footprint. It is particularly suitable for portable sensing, slow data acquisition, and compact process-measurement circuits. MCP6034-E/SL is preferable when the PCB is designed for SOIC rather than TSSOP; it should not be treated as a footprint-compatible substitute. MCP6032-E/SN may suit dual-channel requirements, but its channel count differs from the quad MCP6034. MCP6074-E/SL offers a much higher 1.2 MHz gain-bandwidth product and can suit faster signals, whereas MCP6034 prioritizes low power and lower bandwidth. Before ordering, verify the complete pin map, input common-mode range, output swing, offset limits, bias current, load capability, and temperature grade for the exact selected MPN.

المقارنة مع البدائل

المعامل هذا المنتج
Package 14-TSSOP (0.173 in / 4.40 mm width)
Brand Microchip Technology
Number of Amplifier Circuits 4 circuits
Minimum Single-Supply Voltage 1.8 V
Typical Operating Current per Amplifier 900 nA
Typical Gain-Bandwidth Product 10 kHz
Typical Input Offset Voltage Less than 150 uV
Typical Slew Rate 0.004 V/us
Input and Output Operation Rail-to-rail input and output
Technology Advanced CMOS

أبرز الفروقات

  • Four amplifier channels in one low-power package (مقابلMCP6032-E/ST)
  • Lower-voltage operation and low channel current (مقابلMCP6034-E/SL)
  • Low typical offset for compact precision analog stages (مقابلMCP6074-E/SL)

ملاحظات التصميم

Use the MCP6031/2/3/4 family pin-description table to assign every terminal of the 14-lead TSSOP before laying out the board. Place bypass capacitors close to the device's supply and ground pins, keep the return path short, and route sensitive input nets away from digital switching traces. The TSSOP package is approximately 4.40 mm wide, so confirm that the land pattern, paste stencil, solder mask, and placement equipment match that specific body size.

The 10 kHz gain-bandwidth product makes closed-loop bandwidth depend on the selected noise gain. Use the datasheet stability and bandwidth information to determine the usable gain at the signal frequency, and add compensation only when required by the chosen topology. High-impedance sources should be checked against input bias current, while capacitive loading near the output should be evaluated separately to avoid unexpected frequency response or stability problems.

Budget each active channel separately. With 900 nA typical operating current per amplifier, four active channels consume 3.6 uA at the typical family condition before external bias, resistor, and load currents are included. Check the output stage's quiescent contribution under the selected operating mode and confirm whether shutdown control is available for the exact package ordering code. This prevents a low amplifier-current estimate from being mistaken for the complete circuit consumption.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for the exact ordering code. Confirm current compliance declarations with Microchip Technology before using the device in a regulated production design.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MCP6034-E/ST datasheet MCP6034-E/ST pinout MCP6034-E/ST datasheet pdf MCP6034-E/ST equivalent MCP6034-E/ST replacement MCP6034-E/ST cross reference MCP6034-E/ST price MCP6034-E/ST stock Microchip MCP6034-E/ST MCP6034-E/ST vs MCP6034-E/SL MCP6034-E/ST TSSOP footprint MCP6034 1.8V 10kHz amplifier MCP6034 low power sensor conditioning How do I replace MCP6034-E/ST?

المكونات والمصطلحات ذات الصلة

Microchip Technology MCP6034-E/ST MCP6034 MCP6031-E/ST MCP6032-E/ST MCP6033-E/ST MCP6034-E/SL MCP6074-E/SL operational amplifier op amp precision amplifier quad amplifier CMOS rail-to-rail input rail-to-rail output gain-bandwidth product input offset voltage quiescent current single-supply operation TSSOP-14 QFN family surface-mount package sensor signal conditioning low-power data acquisition transducer amplification
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر