MCP6034-E/ST - 10kHz Quad Low-Power Op Amp | Microchip
MPN: MCP6034-E/ST ✓ AktifMCP6034-E/ST Ringkasan
An operational amplifier, commonly called an op amp, is a high-gain analog building block used to amplify, buffer, filter, compare, and control voltage signals. The MCP6034 belongs to the precision-amplifier and linear-amplifier hierarchy, with emphasis on low power consumption and low offset. Its CMOS implementation supports portable, battery-powered, and space-constrained systems where four amplifier channels are useful without requiring four separate packages.
Key features include four amplifier circuits in one package, a 10 kHz typical gain-bandwidth product, 900 nA typical operating current, and less than 150 uV typical input offset voltage. The 1.8 V minimum single-supply operation supports low-voltage systems, while rail-to-rail input and output characteristics provide useful signal range in compact sensor and signal-conditioning circuits.
The MCP6034 family uses advanced CMOS technology to provide low bias current, high open-loop gain, and rail-to-rail operation. A gain-bandwidth product of 10 kHz makes the amplifier appropriate for slow analog signals rather than high-frequency waveform or video amplification. Unity-gain stability and the low-noise operating characteristics support buffering and precision feedback networks when component and layout conditions are controlled.
Typical applications include battery-powered sensor conditioning, portable medical instrumentation, industrial process measurement, low-current data acquisition, and four-channel transducer amplification. The integrated quad configuration also reduces board area by replacing four single amplifier packages while keeping channel routing and supply connections organized within one 14-TSSOP footprint.
For reliable operation, place input and output bypass capacitors close to their associated supply pins, route sensitive input signals away from switching nodes, and verify that the selected gain and phase margin remain stable at the intended signal frequency. The TSSOP body width of approximately 4.40 mm also requires assembly tooling and land patterns appropriate for that package dimension.
Alternatif penggantian untuk MCP6034-E/ST — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian MCP6034-E/ST (sama faktor bentuk dan footprint) — berbeda di dalam Amplifier Type, Package.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifMCP6034-E/ST Rating Maksimal & Karakteristik Listrik
| Number of Amplifier Circuits | 4 circuits |
| Amplifier Type | General-purpose operational amplifier |
| Minimum Single-Supply Voltage | 1.8 V |
| Typical Operating Current per Amplifier | 900 nA |
| Typical Gain-Bandwidth Product | 10 kHz |
| Typical Input Offset Voltage | Less than 150 uV |
| Input Common-Mode Range | Rail-to-rail input |
| Output Swing | Rail-to-rail output |
| Technology | Advanced CMOS |
| Typical Slew Rate | 0.004 V/us |
| Paket | 14-TSSOP, 0.173 in / 4.40 mm width |
| Packaging | Tube |
| Tipe Mounting | Surface mount |
| Operating Temperature Grade | Extended temperature grade |
MCP6034-E/ST 14-tssop, 0.173 in / 4.40 mm width Diamant Konfigurasi Panduan
Konfigurasi pin untuk MCP6034-E/ST (14-tssop, 0.173 in / 4.40 mm width pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk MCP6034-E/ST.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
MCP6034-E/ST cocok untuk 6 aplikasis: Battery-Powered Sensor Conditioning, Portable Medical Instrumentation, Industrial Process Measurement, Low-Power Data Acquisition, Transducer Amplification, Precision Threshold Detection.
Battery-Powered Sensor Conditioning
The MCP6034-E/ST fits low-voltage sensor front ends where four analog channels must conserve board area and operating current. Its single-supply operation down to 1.8 V and 900 nA typical current per amplifier help limit power demand in portable monitors and environmental sensors. Rail-to-rail input and output swing can preserve signal range when supply headroom is limited. Each channel may buffer a resistive sensor or support a feedback-based gain stage, although the 10 kHz gain-bandwidth product is best suited to slow sensor signals. Confirm input bias current, common-mode limits, output loading, and settling requirements in the manufacturer datasheet before selecting external resistor values.
Direkomendasikan
Portable Medical Instrumentation
The MCP6034-E/ST is suitable for portable medical instrumentation requiring several low-power analog channels in a compact surface-mount package. Four integrated general-purpose amplifiers can handle electrode buffering, sensor interfaces, or threshold and drive stages when operating from a single low-voltage supply. The less-than-150 uV typical input offset specification is valuable when the system must preserve small signals, while 900 nA typical current per amplifier supports a low overall power budget. Because this MPN is not marked as an AEC-Q100-qualified automotive grade, medical suitability must be evaluated against the complete application requirements, including electrical isolation, leakage, calibration, and regulatory validation.
Direkomendasikan
Industrial Process Measurement
The MCP6034-E/ST can support low-frequency industrial process-measurement circuits requiring multiple buffered inputs within a limited power envelope. Possible uses include amplifying outputs from pressure, temperature, and resistive sensors before conversion by an ADC. Rail-to-rail input and output operation is valuable when a 24 V industrial system is reduced to a low-voltage analog rail, while four channels reduce the number of separate amplifier packages. The 10 kHz gain-bandwidth product should be checked against the required signal bandwidth, and the chosen configuration must maintain stable feedback operation. Proper grounding, input filtering, and isolation from motor or relay switching equipment are essential for reliable process measurements.
Direkomendasikan
Low-Power Data Acquisition
The MCP6034-E/ST is appropriate for compact, low-speed data-acquisition front ends that must capture several analog channels without consuming substantial power. The four amplifier channels can buffer high-impedance sources before an external ADC, while unity-gain stability and rail-to-rail operation help simplify input-stage design around low-voltage supplies. A 10 kHz gain-bandwidth product supports slow-changing process, environmental, or laboratory signals rather than high-bandwidth waveform acquisition. Choose feedback resistors that preserve the required accuracy at the operating frequency, provide input protection appropriate to the source, and place bypass capacitors near the supply terminals. ADC acquisition time and source settling should be evaluated together.
Direkomendasikan
Transducer Amplification
The MCP6034-E/ST can amplify the outputs of resistive and active transducers when each channel operates within the amplifier's input and output ranges. Four channels allow a compact instrument to condition bridge, strain-gauge, or resistive feedback signals without using four separate amplifier packages. The low typical offset of less than 150 uV is useful for preserving accuracy around the transducer's quiescent level, and the 900 nA typical current per amplifier is favorable for low-power instruments. Input bias current can create errors with high source impedance, so check that parameter in the manufacturer datasheet and select sensor impedances or biasing methods accordingly.
Direkomendasikan
Precision Threshold Detection
The MCP6034-E/ST can implement four independent comparator-style threshold stages when configured with suitable positive feedback in its linear operating region. Rail-to-rail input operation helps monitor signals near a low-voltage supply rail, and the four-channel package reduces the footprint compared with separate single amplifiers. The less-than-150 uV typical input offset can contribute to repeatable switching thresholds, although actual threshold accuracy also depends on resistor tolerances, output logic levels, temperature drift, and noise. Keep the gain-bandwidth requirement compatible with the 10 kHz product specification and verify output rise and fall behavior before using the amplifier as a fast logic substitute.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk MCP6034-E/ST — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Package | 14-TSSOP (0.173 in / 4.40 mm width) |
| Brand | Microchip Technology |
| Number of Amplifier Circuits | 4 circuits |
| Minimum Single-Supply Voltage | 1.8 V |
| Typical Operating Current per Amplifier | 900 nA |
| Typical Gain-Bandwidth Product | 10 kHz |
| Typical Input Offset Voltage | Less than 150 uV |
| Typical Slew Rate | 0.004 V/us |
| Input and Output Operation | Rail-to-rail input and output |
| Technology | Advanced CMOS |
Diferensiator Kunci
- Four amplifier channels in one low-power package (vsMCP6032-E/ST)
- Lower-voltage operation and low channel current (vsMCP6034-E/SL)
- Low typical offset for compact precision analog stages (vsMCP6074-E/SL)
Catatan Desain
Use the MCP6031/2/3/4 family pin-description table to assign every terminal of the 14-lead TSSOP before laying out the board. Place bypass capacitors close to the device's supply and ground pins, keep the return path short, and route sensitive input nets away from digital switching traces. The TSSOP package is approximately 4.40 mm wide, so confirm that the land pattern, paste stencil, solder mask, and placement equipment match that specific body size.
The 10 kHz gain-bandwidth product makes closed-loop bandwidth depend on the selected noise gain. Use the datasheet stability and bandwidth information to determine the usable gain at the signal frequency, and add compensation only when required by the chosen topology. High-impedance sources should be checked against input bias current, while capacitive loading near the output should be evaluated separately to avoid unexpected frequency response or stability problems.
Budget each active channel separately. With 900 nA typical operating current per amplifier, four active channels consume 3.6 uA at the typical family condition before external bias, resistor, and load currents are included. Check the output stage's quiescent contribution under the selected operating mode and confirm whether shutdown control is available for the exact package ordering code. This prevents a low amplifier-current estimate from being mistaken for the complete circuit consumption.
Informasi Konformitas
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for the exact ordering code. Confirm current compliance declarations with Microchip Technology before using the device in a regulated production design.