MCP6074-E/SL - Quad 1.8V Precision Op Amp | Microchip
MPN: MCP6074-E/SL ✓ نشطMCP6074-E/SL نظرة عامة
An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its differential inputs while using external feedback to define the closed-loop gain. Within the semiconductor hierarchy, the MCP6074 belongs to the precision amplifier family, which is part of the broader linear amplifier and integrated-circuit categories. Rail-to-rail input and output capability lets the amplifier operate close to the supply rails, making it useful in low-voltage systems where usable signal range matters.
The MCP6074 combines several precision-focused characteristics. Its input offset voltage is specified to a maximum of ±150 µV, reducing output error when closed-loop gain amplifies the input mismatch. Typical quiescent current is 110 µA per amplifier, supporting low-power signal-chain designs. The family is unity-gain stable and supports operation from a single supply as low as 1.8 V, while its input and output stages operate rail to rail.
Technically, the MCP6074 uses four amplifier channels in one package, providing consistent operation for multi-channel instrumentation, buffering, or filtering designs. A 1.2 MHz typical gain-bandwidth product is sufficient for low-frequency precision signal conditioning, sensor interfaces, and general-purpose analog filtering. Designers should account for finite bandwidth and output-current limits when calculating closed-loop stability and drive capability.
Typical uses include battery-powered sensor acquisition, industrial measurement inputs, low-voltage data acquisition, active filtering, and multi-channel instrumentation. Its four channels can reduce the number of packages needed when several signals must be conditioned consistently, while the 110 µA typical per-amplifier quiescent current helps preserve battery life in portable equipment.
The primary PCB considerations are input-offset stability, adequate supply bypassing, and control of parasitic feedback around high-impedance sources. Place input and output components close to the appropriate pins, use a low-noise supply path, and avoid long parallel copper traces around sensitive amplifier inputs. Verify stability with the intended feedback network and source impedance rather than assuming the unity-gain specification alone guarantees every practical configuration.
This page combines manufacturer specifications, package details, sourcing guidance, and application-focused engineering notes. It also distinguishes verified drop-in alternatives from devices that only appear similar by function, helping engineers select a replacement based on pin compatibility, electrical proximity, and system requirements rather than the amplifier count alone.
بدائل مباشرة لـ MCP6074-E/SL — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع MCP6074-E/SL (نفس عامل الشكل والبصمة) — يختلف في Package, Amplifier Type, Gain-Bandwidth Product, Number of Channels, Slew Rate.
MCP6004-E/SL
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←MCP6024-E/SL
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
MCP6044-E/SL
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←MCP6074-E/SL الحدود القصوى والخصائص الكهربائية
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Channels | 4 circuits |
| Supply Voltage Range | 1.8 V minimum single supply |
| Gain-Bandwidth Product | 1.2 MHz typical |
| Input Offset Voltage | ±150 µV maximum |
| تيار السكون | 110 µA typical per amplifier |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Unity-Gain Stability | Yes |
| Operating Temperature Grade | E temperature grade |
| العلبة | 14-SOIC, 0.154 inch (3.90 mm) width |
| نوع التركيب | Surface mount |
دليل تكوين أطراف MCP6074-E/SL 14-soic, 0.154 inch (3.90 mm) width
تكوين الأطراف لـ MCP6074-E/SL (حزمة 14-soic, 0.154 inch (3.90 mm) width). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ MCP6074-E/SL.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
MCP6074-E/SL مناسب لـ 6 التطبيقs: Battery-Powered Sensor Acquisition, Industrial Instrumentation, Low-Voltage Data Acquisition, Precision Active Filtering, Precision Voltage Buffering, Portable Test and Measurement.
Battery-Powered Sensor Acquisition
The MCP6074-E/SL fits low-voltage sensor front ends where four channels can condition related measurements from a compact portable instrument. Operation from a single supply as low as 1.8 V supports energy-conscious designs, while typical quiescent current of 110 µA per amplifier reduces the standing load. Rail-to-rail input and output operation preserves usable signal range near the supply limits. The ±150 µV maximum input offset is valuable when modest closed-loop gain amplifies sensor error. Designers should still budget for sensor noise, resistor tolerance, and the finite 1.2 MHz typical gain-bandwidth product.
موصى به
Industrial Instrumentation
The MCP6074-E/SL is appropriate for industrial instrumentation requiring several precision analog channels in one package. Its four amplifier circuits can handle closely related sensor, reference, or diagnostic signals, reducing package count while maintaining a common supply architecture. The low input offset voltage of ±150 µV maximum limits the amplifier's direct contribution to measurement error, and rail-to-rail input and output operation accommodates signals that occupy much of the available supply range. For process-control equipment, isolate long sensor wiring from the PCB and verify industrial temperature requirements against the E-grade ordering information.
موصى به
Low-Voltage Data Acquisition
The MCP6074-E/SL can provide the first amplification stage for multiple low-voltage data-acquisition channels. A single 1.8 V minimum supply simplifies compatibility with compact mixed-signal systems, and the 1.2 MHz typical gain-bandwidth product is suitable for moderate-bandwidth measurements rather than high-speed waveform capture. Unity-gain stability provides a straightforward buffer option, while rail-to-rail output capability improves use of the available signal range. Designers should account for settling time, source impedance, ADC acquisition requirements, and common-mode range when setting the external filtering network.
موصى به
Precision Active Filtering
The MCP6074-E/SL is useful for compact active-filter stages that require consistent amplifier performance across several channels. Its 1.2 MHz typical gain-bandwidth product supports low-frequency and moderate-bandwidth filter networks, while unity-gain stability helps when the same amplifier topology is used as a voltage follower. The ±150 µV maximum input offset helps reduce DC error in precision filtering. Actual corner frequencies, noise, and stability must be evaluated with the selected capacitor and resistor values, and high-Q filters may require additional compensation beyond unity-gain stability.
موصى به
Precision Voltage Buffering
The MCP6074-E/SL can buffer up to four low-level analog signals where rail-to-rail input and output behavior improves headroom. Its unity-gain stability and typical 110 µA quiescent current per amplifier make it a practical choice for compact precision buffers, although output-current capability must be checked against the load. The maximum input offset voltage of ±150 µV limits one source of buffer error at higher downstream gain. For high-impedance sources, minimize input leakage paths and verify capacitive loading because the amplifier's bias current and parasitic capacitance can disturb the intended operating point.
موصى به
Portable Test and Measurement
The MCP6074-E/SL supports portable measurement equipment that needs several analog channels without allocating a separate amplifier package to every input. A 1.8 V minimum operating supply supports compact, battery-operated instruments, and the four-channel structure is useful for probing, excitation, or monitoring multiple related nodes. Rail-to-rail operation preserves dynamic range in low-voltage designs, while the E temperature grade supports extended-temperature industrial environments when the complete ordering details meet the required limits. For metrology-grade accuracy, include offset, bias-current, noise, drift, and resistor tolerance in the uncertainty budget.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ MCP6074-E/SL — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | MCP6004-E/SL | MCP6024-E/SL | MCP6044-E/SL |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Number of Amplifiers | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
أبرز الفروقات
- Four precision amplifier channels in one 14-SOIC package (مقابلMCP602-E/SN)
- Rail-to-rail input and output operation from a 1.8 V minimum supply (مقابلMCP6034T-E/ST)
- Precision offset rating suitable for multichannel signal conditioning (مقابلMCP6004-E/SL)
ملاحظات التصميم
Place input, output, and bypass components close to their associated MCP6074-E/SL pins. Keep input traces short, avoid routing them parallel to switching-node or high-current traces, and provide a quiet ground return. The 1.8 V minimum operating supply leaves little margin for layout-induced supply noise or ground offsets, so measurement and reference grounds should be connected with minimal loop area.
Validate stability with the actual source impedance, load, and feedback network. The MCP6074 is unity-gain stable, but that rating does not guarantee unconditional stability for every high-impedance source or unusual feedback arrangement. High source impedances can interact with input capacitance, while capacitive loading can move the output operating point outside the linear region. Use the manufacturer's stability guidance and simulate the final configuration when precision settling is required.
Do not assume that every amplifier with a similar rail-to-rail description is a drop-in substitute. Confirm the 14-SOIC footprint, channel count, power pins, input assignments, output assignments, maximum supply voltage, temperature range, and shutdown-pin status. The MCP602-E/SN and MCP6034T-E/ST comparison parts are not equivalent to this four-channel package, and the MCP6074T-E/ST ordering form represents a packaging choice rather than a distinct electrical replacement.
معلومات الامتثال
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified in the manufacturer and distributor results.