Microchip Technology

MCP6074-E/SL - Quad 1.8V Precision Op Amp | Microchip

MPN: MCP6074-E/SL ✓ Active
1.8 V minimum single supply Vdss 110 µA typical per amplifier Id 14-SOIC, 0.154 inch (3.90 mm) width Package
MOQ: 1 |

MCP6074-E/SL Overview

Microchip Technology MCP6074-E/SL is a quad precision operational amplifier featuring rail-to-rail input and output operation, a 1.8 V minimum single-supply operating voltage, and a typical gain-bandwidth product of 1.2 MHz in a 14-pin SOIC package.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its differential inputs while using external feedback to define the closed-loop gain. Within the semiconductor hierarchy, the MCP6074 belongs to the precision amplifier family, which is part of the broader linear amplifier and integrated-circuit categories. Rail-to-rail input and output capability lets the amplifier operate close to the supply rails, making it useful in low-voltage systems where usable signal range matters.

The MCP6074 combines several precision-focused characteristics. Its input offset voltage is specified to a maximum of ±150 µV, reducing output error when closed-loop gain amplifies the input mismatch. Typical quiescent current is 110 µA per amplifier, supporting low-power signal-chain designs. The family is unity-gain stable and supports operation from a single supply as low as 1.8 V, while its input and output stages operate rail to rail.

Technically, the MCP6074 uses four amplifier channels in one package, providing consistent operation for multi-channel instrumentation, buffering, or filtering designs. A 1.2 MHz typical gain-bandwidth product is sufficient for low-frequency precision signal conditioning, sensor interfaces, and general-purpose analog filtering. Designers should account for finite bandwidth and output-current limits when calculating closed-loop stability and drive capability.

Typical uses include battery-powered sensor acquisition, industrial measurement inputs, low-voltage data acquisition, active filtering, and multi-channel instrumentation. Its four channels can reduce the number of packages needed when several signals must be conditioned consistently, while the 110 µA typical per-amplifier quiescent current helps preserve battery life in portable equipment.

The primary PCB considerations are input-offset stability, adequate supply bypassing, and control of parasitic feedback around high-impedance sources. Place input and output components close to the appropriate pins, use a low-noise supply path, and avoid long parallel copper traces around sensitive amplifier inputs. Verify stability with the intended feedback network and source impedance rather than assuming the unity-gain specification alone guarantees every practical configuration.

This page combines manufacturer specifications, package details, sourcing guidance, and application-focused engineering notes. It also distinguishes verified drop-in alternatives from devices that only appear similar by function, helping engineers select a replacement based on pin compatibility, electrical proximity, and system requirements rather than the amplifier count alone.

Drop-in alternatives for MCP6074-E/SL — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MCP6074-E/SL (same form factor and footprint) — differing in Package, Amplifier Type, Gain-Bandwidth Product, Number of Channels, Slew Rate.

Microchip Technology
Package: 14-pin SOIC, 0.154 in (3.90 mm) width
Gain-Bandwidth Product: 14 kHz
Slew Rate: 0.003 V/us
Microchip Technology
Package: 8-pin SOIC (SN), 3.90 mm body width
Amplifier Type: Standard (General Purpose)
Number of Channels: 2

MCP6004-E/SL

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 14-SOIC
Quad general-purpose operational amplifier · 4 circuits · 1.8 V to 6 V · Rail-to-rail · Rail-to-rail · 1 MHz · 100 µA · 0.6 V/µs

Contact for price

View Datasheet →

MCP6024-E/SL

✅ Drop-In ⚠️ Specs Unverified
📦 14-SOIC
Bandwidth, offset voltage, and quiescent current differ from the MCP6074's 1.2 MHz typical, ±150 µV maximum, and 110 µA typical per amplifier; confirm pin compatibility

📋 Reference alternative (not in catalog)

MCP6044-E/SL

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 14-SOIC
4 amplifiers · 14 kHz · 600 nA per amplifier · Less than 1 uA per amplifier · Less than 3 mV · 1.4 V · 6 V · Rail-to-rail

Contact for price

View Datasheet →

MCP6074-E/SL Maximum Ratings & Electrical Characteristics

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 circuits
Supply Voltage Range 1.8 V minimum single supply
Gain-Bandwidth Product 1.2 MHz typical
Input Offset Voltage ±150 µV maximum
Quiescent Current 110 µA typical per amplifier
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Unity-Gain Stability Yes
Operating Temperature Grade E temperature grade
Package 14-SOIC, 0.154 inch (3.90 mm) width
Mounting Type Surface mount

MCP6074-E/SL 14-soic, 0.154 inch (3.90 mm) width Pin Configuration Guide

Pin configuration for MCP6074-E/SL (14-soic, 0.154 inch (3.90 mm) width package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

14-soic, 0.154 inch (3.90 mm) width package pinout diagram for MCP6074-E/SL

No detailed pinout data available for MCP6074-E/SL.

Refer to the datasheet for full pin configuration.

Typical Applications

MCP6074-E/SL is suitable for 6 applications: Battery-Powered Sensor Acquisition, Industrial Instrumentation, Low-Voltage Data Acquisition, Precision Active Filtering, Precision Voltage Buffering, Portable Test and Measurement.

📱

Battery-Powered Sensor Acquisition

The MCP6074-E/SL fits low-voltage sensor front ends where four channels can condition related measurements from a compact portable instrument. Operation from a single supply as low as 1.8 V supports energy-conscious designs, while typical quiescent current of 110 µA per amplifier reduces the standing load. Rail-to-rail input and output operation preserves usable signal range near the supply limits. The ±150 µV maximum input offset is valuable when modest closed-loop gain amplifies sensor error. Designers should still budget for sensor noise, resistor tolerance, and the finite 1.2 MHz typical gain-bandwidth product.

🏭

Industrial Instrumentation

The MCP6074-E/SL is appropriate for industrial instrumentation requiring several precision analog channels in one package. Its four amplifier circuits can handle closely related sensor, reference, or diagnostic signals, reducing package count while maintaining a common supply architecture. The low input offset voltage of ±150 µV maximum limits the amplifier's direct contribution to measurement error, and rail-to-rail input and output operation accommodates signals that occupy much of the available supply range. For process-control equipment, isolate long sensor wiring from the PCB and verify industrial temperature requirements against the E-grade ordering information.

📺

Low-Voltage Data Acquisition

The MCP6074-E/SL can provide the first amplification stage for multiple low-voltage data-acquisition channels. A single 1.8 V minimum supply simplifies compatibility with compact mixed-signal systems, and the 1.2 MHz typical gain-bandwidth product is suitable for moderate-bandwidth measurements rather than high-speed waveform capture. Unity-gain stability provides a straightforward buffer option, while rail-to-rail output capability improves use of the available signal range. Designers should account for settling time, source impedance, ADC acquisition requirements, and common-mode range when setting the external filtering network.

🧩

Precision Active Filtering

The MCP6074-E/SL is useful for compact active-filter stages that require consistent amplifier performance across several channels. Its 1.2 MHz typical gain-bandwidth product supports low-frequency and moderate-bandwidth filter networks, while unity-gain stability helps when the same amplifier topology is used as a voltage follower. The ±150 µV maximum input offset helps reduce DC error in precision filtering. Actual corner frequencies, noise, and stability must be evaluated with the selected capacitor and resistor values, and high-Q filters may require additional compensation beyond unity-gain stability.

⚡

Precision Voltage Buffering

The MCP6074-E/SL can buffer up to four low-level analog signals where rail-to-rail input and output behavior improves headroom. Its unity-gain stability and typical 110 µA quiescent current per amplifier make it a practical choice for compact precision buffers, although output-current capability must be checked against the load. The maximum input offset voltage of ±150 µV limits one source of buffer error at higher downstream gain. For high-impedance sources, minimize input leakage paths and verify capacitive loading because the amplifier's bias current and parasitic capacitance can disturb the intended operating point.

🔧

Portable Test and Measurement

The MCP6074-E/SL supports portable measurement equipment that needs several analog channels without allocating a separate amplifier package to every input. A 1.8 V minimum operating supply supports compact, battery-operated instruments, and the four-channel structure is useful for probing, excitation, or monitoring multiple related nodes. Rail-to-rail operation preserves dynamic range in low-voltage designs, while the E temperature grade supports extended-temperature industrial environments when the complete ordering details meet the required limits. For metrology-grade accuracy, include offset, bias-current, noise, drift, and resistor tolerance in the uncertainty budget.

Recommended Products Summary

MCP6074-E/SL Microchip Technology Used in: Battery-Powered Sensor Acquisition, Industrial Instrumentation, Low-Voltage Data Acquisition, Precision Active Filtering, Precision Voltage Buffering, Portable Test and Measurement MCP6074T-E/ST Tape-and-reel ordering option from the same amplifier family Used in: Battery-Powered Sensor Acquisition, Industrial Instrumentation, Low-Voltage Data Acquisition, Precision Active Filtering, Precision Voltage Buffering, Portable Test and Measurement
What is the MCP6074-E/SL?
The MCP6074-E/SL is a four-channel precision operational amplifier from Microchip Technology. It provides rail-to-rail input and output operation, a typical gain-bandwidth product of 1.2 MHz, and operation from a single supply as low as 1.8 V. The four amplifiers are housed in a 14-SOIC package. According to the Microchip MCP6074 product page, it is unity-gain stable and suitable for low-voltage signal-conditioning, instrumentation, buffering, and filtering applications.
What are the key specifications of MCP6074-E/SL that engineers should know?
The MCP6074-E/SL combines four precision operational amplifiers with a maximum input offset voltage of ±150 µV, typical quiescent current of 110 µA per amplifier, and a typical gain-bandwidth product of 1.2 MHz. It also supports single-supply operation from 1.8 V and provides rail-to-rail input and output capability. According to the Microchip MCP6074 product page, unity-gain stability simplifies buffer implementations, although closed-loop stability must still be checked with the selected feedback network and source impedance.
Where can I download the MCP6074-E/SL datasheet PDF?
The official MCP6074 documentation is available from Microchip Technology through the product page at https://www.microchip.com/en-us/product/MCP6074. The linked manufacturer documentation should be used for the complete electrical characteristics, package drawings, pin descriptions, and recommended operating conditions. An indexed copy of the manufacturer datasheet is also listed at https://www.alldatasheet.com/datasheet-pdf/pdf/1692432/MICROCHIP/MCP6074-ESLASHSL.html for convenient document access.
Where can I find the MCP6074-E/SL pinout?
The MCP6074-E/SL pinout is found in the pin-description and package-drawing sections of the Microchip MCP6074 manufacturer datasheet. The device is packaged in a 14-SOIC outline with a 0.154-inch, or 3.90 mm, body width. Use the datasheet drawing to identify the amplifier channels, supply pins, and input and output connections before assigning PCB tracks. The 14-SOIC package drawing should also be cross-checked against the selected board footprint.
Is MCP6074-E/SL suitable for 1.8V battery-powered applications?
Yes, the MCP6074-E/SL is suitable for low-voltage battery-powered designs because it operates from a single supply as low as 1.8 V. Its typical quiescent current is 110 µA per amplifier, while rail-to-rail input and output operation helps preserve signal range near the supply limits. According to the Microchip MCP6074 product page, the amplifier is unity-gain stable. Battery design still requires checking the output-current demand of the selected load and the available headroom.
What is the input offset voltage of MCP6074-E/SL?
The MCP6074-E/SL has a maximum input offset voltage of ±150 µV. Offset voltage represents the differential input voltage required to produce a specified output imbalance, and its effect becomes more significant as closed-loop gain increases. The Microchip MCP6074 product page identifies the device as a precision amplifier with low offset. For high-gain designs, include the offset contribution alongside input bias current, resistor tolerance, noise, and drift when calculating total measurement error.
Is MCP6074-E/SL the same as MCP6074T-E/ST?
The MCP6074-E/SL and MCP6074T-E/ST belong to the same MCP6074 amplifier family, but the ordering suffixes identify different packaging and delivery configurations. MCP6074-E/SL is identified as the 14-SOIC surface-mount variant, while the T/ST ordering code is associated with a tape-and-reel delivery form of the family. Before substituting one exact orderable MPN for another, verify the manufacturer ordering information, reel orientation, quantity, and whether the receiving assembly is configured for tape-and-reel handling.
What is the best drop-in replacement for MCP6074-E/SL?
The closest drop-in choice is another qualified Microchip quad precision amplifier in the same 14-SOIC footprint and temperature grade, subject to confirmation of channel pinout and electrical limits. The MCP6074T-E/ST is a packaging-related family alternative, but it is not a distinct electrical substitute and should not be used to pad a cross-reference list. For a true component replacement, compare supply range, offset voltage, gain-bandwidth product, quiescent current, rail-to-rail behavior, and the manufacturer pin table. Request engineering review before approving an alternative.
Can MCP602-E/SN replace MCP6074-E/SL?
No, the MCP602-E/SN is not a direct drop-in replacement for the MCP6074-E/SL because it is not the same four-channel amplifier in the same 14-SOIC package. The MCP6074-E/SL provides four amplifier circuits, while the comparison results identify MCP602-E/SN as a different device family with different packaging and channel count. A functional substitution would require a PCB redesign or external routing, so it is outside the strict same-package, pin-to-pin drop-in category.
Can MCP6034T-E/ST replace MCP6074-E/SL?
The MCP6034T-E/ST should not be treated as a direct drop-in replacement for the MCP6074-E/SL without verifying the package and pin assignments. The two devices appear in comparison data, but the MCP6074-E/SL is a four-channel 14-SOIC amplifier, whereas the MCP6034 family uses a different package arrangement. Similar rail-to-rail precision-amplifier functions do not establish pin compatibility. Verify channel count, footprint, exposed connections, and every signal and supply pin in the manufacturer documentation.
MCP6074-E/SL vs MCP6074T-E/ST - which is better for production?
Choose MCP6074-E/SL or MCP6074T-E/ST primarily according to the required mechanical delivery method rather than electrical performance. Both identify members of the same MCP6074 precision amplifier family, but the T/ST ordering form is intended for tape-and-reel handling. Confirm the exact ordering table, reel orientation, and incoming-board process. If both orderable forms are electrically and mechanically acceptable for the assembled PCB, select the format that matches the production line and material-handling requirements.
When should I choose MCP6074-E/SL over another quad precision op amp?
Choose MCP6074-E/SL when the design needs four precision amplifier channels, rail-to-rail signal swing, a maximum input offset voltage of ±150 µV, and operation from a single supply as low as 1.8 V. The Microchip MCP6074 product page also identifies 110 µA typical quiescent current per amplifier and unity-gain stability. Select a different amplifier only when the MCP6074 fails a specific bandwidth, output-current, noise, power, offset-drift, or channel-separation requirement.
Is MCP6074-E/SL suitable for sensor instrumentation and data acquisition?
Yes, MCP6074-E/SL is suitable for low-frequency sensor instrumentation and multi-channel data acquisition. Its ±150 µV maximum input offset voltage supports precision signal conditioning, while rail-to-rail input and output operation is useful when sensors operate near the supply range. The 1.2 MHz typical gain-bandwidth product supports moderate-bandwidth amplification and filtering. The Microchip MCP6074 product page confirms unity-gain stability, but the complete feedback network and sensor impedance should still be evaluated for noise and stability.
How should the MCP6074-E/SL PCB be designed for low-noise operation?
Route sensitive amplifier inputs as short as possible, keep them away from switching nodes and high-current return paths, and place input, output, and bypass components close to their associated pins. Use a quiet supply and provide local decoupling to reduce supply-noise coupling into the amplifier. High-impedance sources require careful attention to parasitic capacitance and leakage because they can alter effective feedback factors and create instability. Validate the final layout with the actual source impedance, filter values, ground reference, and measurement bandwidth.
Where can I buy MCP6074-E/SL and what is its current lead time?
Use the Request a Quote form on this page to request the current MCP6074-E/SL price, stock position, manufacturer lead time, and minimum-order quantity. The structured listing is refreshed from current channel information, while individual stock levels can change rapidly by package, quantity, and region. Include your target quantity and required reel or tray format in the request so the quote can be matched to the correct MCP6074-E/SL ordering configuration.
What is the price of MCP6074-E/SL?
The current MCP6074-E/SL price depends on quantity, package form, inventory, and supplier channel. Use the Request a Quote form on this page for the unit price at your required quantity and an updated availability statement. Quote requests should specify the exact MCP6074-E/SL ordering code, target annual and build quantities, and whether the parts are required in tube, tray, or tape-and-reel packaging for manufacturing planning.
Is MCP6074-E/SL in stock and what is its lead time?
Current inventory and lead time for MCP6074-E/SL should be confirmed through the Request a Quote form on this page. Stock can change between production allocations and distributor inventories, so the quantity shown by any individual listing should not be treated as a guaranteed allocation. For planning, request the current factory lead time, authorized-channel availability, and partial-shipment policy. Specify your scheduled build date and required packaging to obtain an actionable sourcing response.

Engineering reference data for MCP6074-E/SL — comparison, design guidance, and compliance information.

Selection Guide

Choose MCP6074-E/SL when the design needs four precision amplifier channels in a 14-SOIC package, rail-to-rail input and output operation, operation from a single 1.8 V supply, and a maximum input offset voltage of ±150 µV. Its typical 110 µA quiescent current per amplifier and 1.2 MHz gain-bandwidth product make it especially suitable for low-voltage sensor acquisition, buffering, instrumentation, and moderate-bandwidth filtering. Review MCP6004-E/SL when the board is already qualified for that amplifier's offset, noise, bandwidth, and power characteristics. Consider MCP6024-E/SL or MCP6044-E/SL only after their manufacturer pin tables and electrical limits have been checked against the existing design. Do not select MCP602-E/SN or MCP6034T-E/ST as direct drop-ins because their package and channel configurations differ. For any substitution, verify supply voltage, temperature grade, stability, offset, bias current, output drive, and the complete 14-pin connection before releasing production artwork.

Comparison with Alternatives

Parameter This Product MCP6004-E/SL MCP6024-E/SL MCP6044-E/SL
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Number of Amplifiers 4 circuits 4 circuits 4 circuits 4 circuits

Key Differentiators

  • Four precision amplifier channels in one 14-SOIC package (vs MCP602-E/SN)
  • Rail-to-rail input and output operation from a 1.8 V minimum supply (vs MCP6034T-E/ST)
  • Precision offset rating suitable for multichannel signal conditioning (vs MCP6004-E/SL)

Design Notes

Place input, output, and bypass components close to their associated MCP6074-E/SL pins. Keep input traces short, avoid routing them parallel to switching-node or high-current traces, and provide a quiet ground return. The 1.8 V minimum operating supply leaves little margin for layout-induced supply noise or ground offsets, so measurement and reference grounds should be connected with minimal loop area.

Validate stability with the actual source impedance, load, and feedback network. The MCP6074 is unity-gain stable, but that rating does not guarantee unconditional stability for every high-impedance source or unusual feedback arrangement. High source impedances can interact with input capacitance, while capacitive loading can move the output operating point outside the linear region. Use the manufacturer's stability guidance and simulate the final configuration when precision settling is required.

Do not assume that every amplifier with a similar rail-to-rail description is a drop-in substitute. Confirm the 14-SOIC footprint, channel count, power pins, input assignments, output assignments, maximum supply voltage, temperature range, and shutdown-pin status. The MCP602-E/SN and MCP6034T-E/ST comparison parts are not equivalent to this four-channel package, and the MCP6074T-E/ST ordering form represents a packaging choice rather than a distinct electrical replacement.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified in the manufacturer and distributor results.

Related Searches

MCP6074-E/SL datasheet MCP6074-E/SL pinout MCP6074-E/SL datasheet pdf MCP6074-E/SL equivalent MCP6074-E/SL replacement MCP6074-E/SL cross reference MCP6074-E/SL footprint MCP6074-E/SL price MCP6074-E/SL stock Microchip MCP6074-E/SL MCP6074 quad precision op amp MCP6074 1.8V rail-to-rail amplifier MCP6074-E/SL vs MCP6074T-E/ST MCP6074 sensor signal conditioning

Related Components & Terms

Microchip Technology MCP6074-E/SL MCP6074 MCP6074T-E/ST MCP6004-E/SL MCP6024-E/SL MCP6044-E/SL MCP602-E/SN MCP6034T-E/ST operational amplifier op amp precision amplifier quad amplifier linear amplifier integrated circuit rail-to-rail input rail-to-rail output unity-gain stable gain-bandwidth product input offset voltage quiescent current 14-SOIC SOIC family surface-mount package sensor signal conditioning
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details