OPA364ID - 7 MHz Rail-to-Rail Op Amp | Texas Instruments
MPN: OPA364ID ✓ نشطOPA364ID نظرة عامة
An operational amplifier is a voltage-gain building block that compares two input voltages and drives its output to represent their difference. The OPA364 belongs to the broader operational-amplifier hierarchy within analog signal-chain ICs, where it sits between sensors or input networks and downstream analog-to-digital converters, filters, buffers, and control circuitry. Its rail-to-rail input common-mode range and rail-to-rail output capability make it useful in systems whose signals approach the supply rails.
Key features include a 7 MHz gain-bandwidth product, 1.8 V minimum single-supply operation, 5.5 V maximum supply voltage, 90 dB common-mode rejection, and rail-to-rail input and output stages. The CMOS input architecture supports low-voltage operation and is suited to battery-powered instrumentation. The manufacturer identifies sensor amplification and signal conditioning in battery-powered systems as principal applications.
The OPA364 and OPA363 families provide excellent common-mode rejection without the crossover associated with traditional complementary input stages. This characteristic is particularly useful when driving analog-to-digital converters because it helps preserve differential linearity and total harmonic distortion performance. The output voltage swing is specified within 10 mV of the relevant supply rail under stated conditions.
Typical uses include low-voltage sensor interfaces, portable measurement equipment, analog-to-digital converter input drivers, current and voltage signal conditioners, audio and communication paths, and low-voltage control loops. Because the device supports operation from 1.8 V, it is suitable for systems powered by a single lithium-cell battery or a low-voltage regulated rail.
Design the bypass network so a small ceramic capacitor is placed close to each supply pin, and route the input and output tracks to minimize parasitic capacitance and pickup. Check the input common-mode and output-swing limits against the actual signal range at temperature, especially when the amplifier operates near either supply rail. Select gain so closed-loop bandwidth and output-voltage requirements remain consistent with the signal being conditioned.
This product page combines the manufacturer device description, package and ordering information, verified distributor references, pin-level implementation guidance, and same-brand drop-in options to support faster component selection and PCB-level implementation.
بدائل مباشرة لـ OPA364ID — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
OPA364UID
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
OPA364AID
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
OPA364AIDG4
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
OPA364UIDG4
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
OPA364IDR
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
OPA364ID الحدود القصوى والخصائص الكهربائية
| Amplifier Type | Single operational amplifier |
| Supply Voltage Range | 1.8 V to 5.5 V |
| Single-Supply Operation | 1.8 V to 5.5 V |
| Gain-Bandwidth Product | 7 MHz |
| Common-Mode Rejection Ratio | 90 dB |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Output Voltage Swing | Within 10 mV of the relevant supply rail |
| Number of Circuits | 1 circuit |
| Technology | CMOS operational amplifier |
| نطاق درجة حرارة التشغيل | -40 °C to +125 °C |
| العلبة | 8-pin SOIC (D) |
| نوع التركيب | Surface mount |
تكوين أطراف OPA364ID
| دبوس 1 | NC — Not connected |
| دبوس 2 | IN- — Inverting input |
| دبوس 3 | IN+ — Non-inverting input |
| دبوس 4 | V- — Negative supply connection |
| دبوس 5 | NC — Not connected |
| دبوس 6 | OUT — Analog output |
| دبوس 7 | V+ — Positive supply connection |
| دبوس 8 | NC — Not connected |
التطبيقات النموذجية
OPA364ID مناسب لـ 6 التطبيقs: Battery-Powered Sensor Signal Conditioning, Analog-to-Digital Converter Input Driver, Portable Instrumentation Amplifier, Low-Voltage Audio Signal Path, Industrial Current and Voltage Conditioning, Communications Interface Buffering.
Battery-Powered Sensor Signal Conditioning
The OPA364ID fits low-voltage sensor interfaces because its 1.8 V to 5.5 V supply range supports operation from a single lithium-cell or compact regulated source. Rail-to-rail inputs allow the amplifier to handle sensor signals that occupy much of the available signal range, while the 90 dB CMRR helps reject common-mode voltage coupled into both sensor inputs. Place the amplifier close to the sensor or connector and bypass the supply pins with local ceramic capacitors to limit noise pickup.
موصى به
Analog-to-Digital Converter Input Driver
The OPA364ID is appropriate for conditioning a sensor or divider into an ADC input because the 7 MHz gain-bandwidth product provides useful closed-loop bandwidth and the 90 dB CMRR reduces common-mode error. The manufacturer specifically notes that excellent CMRR helps preserve ADC differential linearity and total harmonic distortion without input-stage crossover. Select the feedback network to set the required gain, and verify that the ADC input range does not exceed the amplifier output-swing limits.
موصى به
Portable Instrumentation Amplifier
A portable instrument benefits from an amplifier that operates down to 1.8 V and accepts bipolar input signals on a single supply. The OPA364ID combines that low-voltage capability with 7 MHz gain bandwidth and rail-to-rail input/output behavior, making it useful for sensor hubs, handheld meters, and compact measurement systems. Keep the input network close to the amplifier, maintain short ground returns, and account for the 10 mV output-swing margin from the supply rails when defining the usable measurement span.
موصى به
Low-Voltage Audio Signal Path
The OPA364ID can support audio buffering and low-voltage signal-conditioning paths where the full output range is important. Its rail-to-rail output stage can approach the supply limits within the manufacturer-stated 10 mV margin, while the 90 dB CMRR helps suppress common-mode hum or supply-related disturbance that appears at both inputs. The 7 MHz gain-bandwidth product is suitable for audio-band amplification, although the selected gain and load must be checked for output-swing and stability requirements.
موصى به
Industrial Current and Voltage Conditioning
The OPA364ID can amplify a conditioned voltage representing a sensed current or voltage level in an industrial control module. Its -40 °C to +125 °C temperature range and 90 dB CMRR support operation where common-mode voltage may vary across a sensed line. The 1.8 V minimum supply broadens compatibility with compact control hardware, but designers should preserve grounding separation, provide local supply bypassing, and ensure that high-energy transients are clamped outside the amplifier's 5.5 V maximum supply.
موصى به
Communications Interface Buffering
The OPA364ID can buffer or amplify low-level communications signals in portable and industrial interface circuits. Its 7 MHz gain-bandwidth product supports signal conditioning beyond baseband audio, while the CMOS input architecture and 90 dB CMRR are useful when the source introduces common-mode variation. Keep traces short and controlled-impedance where appropriate, provide a stable reference or return path, and avoid relying on the amplifier to supply high capacitive loads without confirming stability and output-current requirements.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ OPA364ID — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | OPA364UID | OPA364AID | OPA364AIDG4 | OPA364UIDG4 | OPA364IDR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Supply Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Gain-Bandwidth Product | 7 MHz | 7 MHz | 7 MHz | 7 MHz | 7 MHz | 7 MHz |
| Common-Mode Rejection Ratio | 90 dB | 90 dB | 90 dB | 90 dB | 90 dB | 90 dB |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Output Swing | Rail-to-rail, within 10 mV of the relevant supply rail | Rail-to-rail, within 10 mV of the relevant supply rail | Rail-to-rail, within 10 mV of the relevant supply rail | Rail-to-rail, within 10 mV of the relevant supply rail | Rail-to-rail, within 10 mV of the relevant supply rail | Rail-to-rail, within 10 mV of the relevant supply rail |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C | -40 °C to +125 °C |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
| Special Ordering Feature | Standard OPA364ID ordering configuration | U ordering suffix | A ordering suffix | A and G4 ordering suffixes | U and G4 ordering suffixes | R tape-and-reel ordering suffix |
أبرز الفروقات
- Low-voltage operation with full-range signal handling (مقابلOPA364UID)
- Automotive-ordering family option for qualified designs (مقابلOPA364UID)
- Same 7 MHz bandwidth and 90 dB CMRR performance class (مقابلOPA364IDR)
ملاحظات التصميم
Place a small ceramic bypass capacitor at each supply pin and connect it directly to the ground reference with a short return path. The OPA364ID operates down to 1.8 V, so supply bypassing becomes increasingly important as rail voltage and available headroom decrease. Keep the amplifier and its input network away from switching nodes and high-current return paths.
Assign pin 2 to IN−, pin 3 to IN+, pin 4 to V−, pin 6 to OUT, and pin 7 to V+ in accordance with the manufacturer SOIC pinout. Pins 1, 5, and 8 are not connected. Route feedback components close to the relevant input pins, and keep sensitive input traces away from the output trace to reduce parasitic feedback and oscillation risk.
Verify the usable signal range at temperature rather than treating the rail-to-rail designation as an exact zero-volt limit. The manufacturer states that output swing is within 10 mV of the relevant supply rail under the specified conditions. Preserve margin for offset, output loading, and temperature variation, especially when driving an ADC near either end of its input range.
Do not exceed the 5.5 V maximum supply voltage, and do not apply negative input or output voltages beyond the ratings in the manufacturer datasheet. Check the source impedance because bias-current error can contribute to input-offset voltage in high-impedance sensor circuits. Also confirm stability for the intended capacitive load instead of assuming the amplifier can drive every external load directly.
معلومات الامتثال
Use the current manufacturer product page and regulatory documents for compliance declarations specific to the selected orderable suffix.