Texas Instruments

OPA364ID - 7 MHz Rail-to-Rail Op Amp | Texas Instruments

部品番号: OPA364ID ✓ 生産中
1.8 V to 5.5 V Vdss 8-pin SOIC (D) Package
MOQ: 1 |

OPA364ID 概要

The Texas Instruments OPA364ID is a single, low-voltage CMOS operational amplifier with a 1.8 V to 5.5 V supply range, 7 MHz gain-bandwidth product, and rail-to-rail input/output operation in an 8-pin SOIC package. Designed for precision signal conditioning, it accepts bipolar input signals on a single supply while maintaining high common-mode rejection, including a specified 90 dB CMRR.

An operational amplifier is a voltage-gain building block that compares two input voltages and drives its output to represent their difference. The OPA364 belongs to the broader operational-amplifier hierarchy within analog signal-chain ICs, where it sits between sensors or input networks and downstream analog-to-digital converters, filters, buffers, and control circuitry. Its rail-to-rail input common-mode range and rail-to-rail output capability make it useful in systems whose signals approach the supply rails.

Key features include a 7 MHz gain-bandwidth product, 1.8 V minimum single-supply operation, 5.5 V maximum supply voltage, 90 dB common-mode rejection, and rail-to-rail input and output stages. The CMOS input architecture supports low-voltage operation and is suited to battery-powered instrumentation. The manufacturer identifies sensor amplification and signal conditioning in battery-powered systems as principal applications.

The OPA364 and OPA363 families provide excellent common-mode rejection without the crossover associated with traditional complementary input stages. This characteristic is particularly useful when driving analog-to-digital converters because it helps preserve differential linearity and total harmonic distortion performance. The output voltage swing is specified within 10 mV of the relevant supply rail under stated conditions.

Typical uses include low-voltage sensor interfaces, portable measurement equipment, analog-to-digital converter input drivers, current and voltage signal conditioners, audio and communication paths, and low-voltage control loops. Because the device supports operation from 1.8 V, it is suitable for systems powered by a single lithium-cell battery or a low-voltage regulated rail.

Design the bypass network so a small ceramic capacitor is placed close to each supply pin, and route the input and output tracks to minimize parasitic capacitance and pickup. Check the input common-mode and output-swing limits against the actual signal range at temperature, especially when the amplifier operates near either supply rail. Select gain so closed-loop bandwidth and output-voltage requirements remain consistent with the signal being conditioned.

This product page combines the manufacturer device description, package and ordering information, verified distributor references, pin-level implementation guidance, and same-brand drop-in options to support faster component selection and PCB-level implementation.

ドロップイン代替品: OPA364ID — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

OPA364UID

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin SOIC (D)
Same 1.8 V to 5.5 V, 7 MHz rail-to-rail functional class; ordering and qualification details differ by 0 percentage points on the stated key ratings

📋 参考代替品(カタログ未掲載)

OPA364AID

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin SOIC (D)
Same 1.8 V to 5.5 V, 7 MHz rail-to-rail functional class; automotive-ordering designation differs without changing the stated key ratings

📋 参考代替品(カタログ未掲載)

OPA364AIDG4

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin SOIC (D)
Same 1.8 V to 5.5 V, 7 MHz rail-to-rail functional class; automotive ordering and green-package suffix differ without changing the stated key ratings

📋 参考代替品(カタログ未掲載)

OPA364UIDG4

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin SOIC (D)
Same 1.8 V to 5.5 V, 7 MHz rail-to-rail functional class; ordering and green-package suffix differ without changing the stated key ratings

📋 参考代替品(カタログ未掲載)

OPA364IDR

✅ ドロップイン
📦 8-pin SOIC (D)
Identical 1.8 V to 5.5 V, 7 MHz rail-to-rail ratings; only the tape-and-reel ordering suffix differs

📋 参考代替品(カタログ未掲載)

OPA364ID 最大定格&電気的特性

Amplifier Type Single operational amplifier
Supply Voltage Range 1.8 V to 5.5 V
Single-Supply Operation 1.8 V to 5.5 V
Gain-Bandwidth Product 7 MHz
Common-Mode Rejection Ratio 90 dB
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Output Voltage Swing Within 10 mV of the relevant supply rail
Number of Circuits 1 circuit
Technology CMOS operational amplifier
動作温度範囲 -40 °C to +125 °C
パッケージ 8-pin SOIC (D)
実装タイプ Surface mount

OPA364ID ピン構成

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
ピン 1 NC — Not connected
ピン 2 IN- — Inverting input
ピン 3 IN+ — Non-inverting input
ピン 4 V- — Negative supply connection
ピン 5 NC — Not connected
ピン 6 OUT — Analog output
ピン 7 V+ — Positive supply connection
ピン 8 NC — Not connected

主な用途

OPA364ID の用途: 6 件s: Battery-Powered Sensor Signal Conditioning, Analog-to-Digital Converter Input Driver, Portable Instrumentation Amplifier, Low-Voltage Audio Signal Path, Industrial Current and Voltage Conditioning, Communications Interface Buffering.

🧩

Battery-Powered Sensor Signal Conditioning

The OPA364ID fits low-voltage sensor interfaces because its 1.8 V to 5.5 V supply range supports operation from a single lithium-cell or compact regulated source. Rail-to-rail inputs allow the amplifier to handle sensor signals that occupy much of the available signal range, while the 90 dB CMRR helps reject common-mode voltage coupled into both sensor inputs. Place the amplifier close to the sensor or connector and bypass the supply pins with local ceramic capacitors to limit noise pickup.

📺

Analog-to-Digital Converter Input Driver

The OPA364ID is appropriate for conditioning a sensor or divider into an ADC input because the 7 MHz gain-bandwidth product provides useful closed-loop bandwidth and the 90 dB CMRR reduces common-mode error. The manufacturer specifically notes that excellent CMRR helps preserve ADC differential linearity and total harmonic distortion without input-stage crossover. Select the feedback network to set the required gain, and verify that the ADC input range does not exceed the amplifier output-swing limits.

📱

Portable Instrumentation Amplifier

A portable instrument benefits from an amplifier that operates down to 1.8 V and accepts bipolar input signals on a single supply. The OPA364ID combines that low-voltage capability with 7 MHz gain bandwidth and rail-to-rail input/output behavior, making it useful for sensor hubs, handheld meters, and compact measurement systems. Keep the input network close to the amplifier, maintain short ground returns, and account for the 10 mV output-swing margin from the supply rails when defining the usable measurement span.

🎧

Low-Voltage Audio Signal Path

The OPA364ID can support audio buffering and low-voltage signal-conditioning paths where the full output range is important. Its rail-to-rail output stage can approach the supply limits within the manufacturer-stated 10 mV margin, while the 90 dB CMRR helps suppress common-mode hum or supply-related disturbance that appears at both inputs. The 7 MHz gain-bandwidth product is suitable for audio-band amplification, although the selected gain and load must be checked for output-swing and stability requirements.

🏭

Industrial Current and Voltage Conditioning

The OPA364ID can amplify a conditioned voltage representing a sensed current or voltage level in an industrial control module. Its -40 °C to +125 °C temperature range and 90 dB CMRR support operation where common-mode voltage may vary across a sensed line. The 1.8 V minimum supply broadens compatibility with compact control hardware, but designers should preserve grounding separation, provide local supply bypassing, and ensure that high-energy transients are clamped outside the amplifier's 5.5 V maximum supply.

🌐

Communications Interface Buffering

The OPA364ID can buffer or amplify low-level communications signals in portable and industrial interface circuits. Its 7 MHz gain-bandwidth product supports signal conditioning beyond baseband audio, while the CMOS input architecture and 90 dB CMRR are useful when the source introduces common-mode variation. Keep traces short and controlled-impedance where appropriate, provide a stable reference or return path, and avoid relying on the amplifier to supply high capacitive loads without confirming stability and output-current requirements.

What are the key specifications of OPA364ID that engineers should know?
The OPA364ID is a single CMOS operational amplifier with a 1.8 V to 5.5 V supply range, 7 MHz gain-bandwidth product, 90 dB CMRR, and rail-to-rail input and output operation. According to the Texas Instruments OPA364 datasheet, it is packaged in an 8-pin SOIC and is intended for low-voltage sensor amplification and signal conditioning. Its -40 °C to +125 °C operating-temperature range supports industrial and extended-temperature designs.
What is the operating voltage of OPA364ID?
The OPA364ID operates from 1.8 V to 5.5 V when configured for single-supply operation. The Texas Instruments OPA364 datasheet describes the family as optimized for low-voltage operation and identifies battery-powered sensor interfaces as a principal application. The same device can also operate with split supplies, subject to the applicable total-supply and common-mode limits described in the manufacturer datasheet.
Is OPA364ID rail-to-rail input and output?
Yes, the OPA364ID supports rail-to-rail input and output operation. According to the Texas Instruments OPA364 datasheet, its output voltage swing is within 10 mV of the relevant supply rail under the stated conditions. This makes the amplifier suitable for low-voltage systems in which sensor signals or buffered outputs must occupy much of the available supply range.
What is the gain-bandwidth product of OPA364ID?
The OPA364ID has a gain-bandwidth product of 7 MHz. According to the Texas Instruments product page, this bandwidth supports general-purpose low-voltage signal conditioning while retaining the rail-to-rail characteristics required by portable and battery-powered systems. The closed-loop bandwidth will also depend on the selected gain, so noise-gain and feedback design should be checked against the required signal bandwidth.
Where can I download the OPA364ID datasheet PDF?
The official OPA364ID datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/gpn/OPA364. The manufacturer datasheet is the appropriate document for the pinout, electrical characteristics, typical performance curves, application circuit, and ordering information. The device-specific ordering page for OPA364ID is also available at https://www.ti.com/product/OPA364/part-details/OPA364ID.
Where can I find the OPA364ID pinout?
The OPA364ID uses an 8-pin SOIC package, and its complete pin description appears in the Texas Instruments OPA364 datasheet. The standard single-amplifier assignments are pin 1 NC, pin 2 inverting input, pin 3 non-inverting input, pin 4 V−, pin 5 NC, pin 6 output, pin 7 V+, and pin 8 NC. Use the manufacturer pin-description table when assigning PCB tracks and test points.
Is OPA364ID suitable for battery-powered sensor applications?
Yes, the OPA364ID is suitable for battery-powered sensor amplification because it operates from a 1.8 V supply and provides rail-to-rail input and output operation. According to the Texas Instruments OPA364 datasheet, sensor amplification and signal conditioning in battery-powered systems are explicitly identified applications. Low operating voltage reduces power-supply headroom requirements while preserving usable signal range.
Why is the 90 dB CMRR of OPA364ID important for ADC inputs?
The 90 dB CMRR helps reject common-mode voltage that appears equally on both amplifier inputs, reducing its contribution to the differential output. The Texas Instruments OPA364 datasheet states that the CMOS input architecture offers excellent common-mode rejection without crossover associated with traditional complementary input stages, helping preserve ADC differential linearity and total harmonic distortion performance.
OPA364ID vs OPA364UID — which is better for an industrial design?
The OPA364ID and OPA364UID share the same SOIC-8 footprint and principal low-voltage operational-amplifier function, but their ordering and qualification details should be checked for the exact installation. Both support 1.8 V to 5.5 V operation, 7 MHz gain-bandwidth product, and rail-to-rail operation. Choose the orderable suffix that matches the required temperature range, qualification status, and production configuration.
What is the best drop-in replacement for OPA364ID?
The OPA364UID is a same-brand SOIC-8 candidate for the OPA364ID when its ordering and qualification details satisfy the design requirements. OPA364AID and OPA364AIDG4 are additional same-brand options associated with the 8-pin family. Confirm the complete pin functions, electrical limits, temperature grade, qualification status, and lifecycle status in the manufacturer documentation before production substitution.
Can OPA364ID be replaced without changing the PCB footprint?
Yes, compatible members of the OPA364 family can use the same 8-pin SOIC footprint when their function and electrical ratings meet the design requirements. The OPA364UID, OPA364AID, OPA364AIDG4, and related listed options maintain pin compatibility for this family. PCB replacement is not automatically safe if the required temperature grade, automotive qualification, supply limits, or production status differs.
What can replace OPA364ID?
OPA364UID, OPA364AID, OPA364AIDG4, and OPA364UIDG4 are same-brand drop-in candidates in the OPA364 family, while OPA364IDR represents the same device in a tape-and-reel ordering configuration. According to the Texas Instruments family documentation, the OPA364 family is optimized for 1.8 V to 5.5 V single-supply operation with 7 MHz gain bandwidth. Verify package markings and qualification requirements before substitution.
Is OPA364ID the same as OPA364IDR?
The OPA364ID and OPA364IDR refer to the same Texas Instruments OPA364 device in an 8-pin SOIC package, with OPA364IDR using the R suffix for the tape-and-reel shipping configuration. The electrical function remains the single, 1.8 V to 5.5 V, 7 MHz rail-to-rail operational amplifier described by the manufacturer. Existing production software must still confirm that the alternate order code and packaging are acceptable.
Where can I buy OPA364ID and check its current price?
Use the Request a Quote form on this XAIPART product page to request OPA364ID pricing, current stock, lead time, and minimum order quantity. The manufacturer product page identifies OPA364ID as an 8-pin SOIC orderable configuration. A commercial inquiry should state the required quantity, target delivery date, and whether reel, cut-tape, or another authorized packing format is needed.
What is the lead time and stock status for OPA364ID?
Request the current OPA364ID stock position and production lead time through the Request a Quote form on this page. Lead time can vary with order quantity, approved source, and required delivery date, so it should be confirmed for the actual purchase order rather than inferred from catalog availability. Include the desired SOIC packing format and shipment destination with the inquiry.

エンジニアリング参考データ: OPA364ID — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose OPA364ID for low-voltage, single-supply signal conditioning when the design requires a 1.8 V to 5.5 V operating range, 7 MHz gain bandwidth, 90 dB CMRR, and rail-to-rail input/output behavior in an 8-pin SOIC footprint. OPA364UID is the closest same-family selection when its ordering and qualification configuration matches the installation. OPA364AID and OPA364AIDG4 are appropriate when the automotive-ordering designation is required, while OPA364UIDG4 provides the corresponding U-ordering and G4-package combination. OPA364IDR is primarily useful when the required production format is tape-and-reel. Before replacing OPA364ID, verify the exact suffix, temperature requirements, qualification status, supply limits, lifecycle condition, and operating availability. All listed alternatives retain the SOIC-8 footprint, but they are same-brand family options rather than independently qualified cross-brand substitutes.

代替品との比較

パラメータ この製品 OPA364UID OPA364AID OPA364AIDG4 OPA364UIDG4 OPA364IDR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D)
Supply Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V
Gain-Bandwidth Product 7 MHz 7 MHz 7 MHz 7 MHz 7 MHz 7 MHz
Common-Mode Rejection Ratio 90 dB 90 dB 90 dB 90 dB 90 dB 90 dB
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail, within 10 mV of the relevant supply rail Rail-to-rail, within 10 mV of the relevant supply rail Rail-to-rail, within 10 mV of the relevant supply rail Rail-to-rail, within 10 mV of the relevant supply rail Rail-to-rail, within 10 mV of the relevant supply rail Rail-to-rail, within 10 mV of the relevant supply rail
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C -40 °C to +125 °C
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Special Ordering Feature Standard OPA364ID ordering configuration U ordering suffix A ordering suffix A and G4 ordering suffixes U and G4 ordering suffixes R tape-and-reel ordering suffix

主な差別化要因

  • Low-voltage operation with full-range signal handling (vs OPA364UID)
  • Automotive-ordering family option for qualified designs (vs OPA364UID)
  • Same 7 MHz bandwidth and 90 dB CMRR performance class (vs OPA364IDR)

設計ノート

Place a small ceramic bypass capacitor at each supply pin and connect it directly to the ground reference with a short return path. The OPA364ID operates down to 1.8 V, so supply bypassing becomes increasingly important as rail voltage and available headroom decrease. Keep the amplifier and its input network away from switching nodes and high-current return paths.

Assign pin 2 to IN−, pin 3 to IN+, pin 4 to V−, pin 6 to OUT, and pin 7 to V+ in accordance with the manufacturer SOIC pinout. Pins 1, 5, and 8 are not connected. Route feedback components close to the relevant input pins, and keep sensitive input traces away from the output trace to reduce parasitic feedback and oscillation risk.

Verify the usable signal range at temperature rather than treating the rail-to-rail designation as an exact zero-volt limit. The manufacturer states that output swing is within 10 mV of the relevant supply rail under the specified conditions. Preserve margin for offset, output loading, and temperature variation, especially when driving an ADC near either end of its input range.

Do not exceed the 5.5 V maximum supply voltage, and do not apply negative input or output voltages beyond the ratings in the manufacturer datasheet. Check the source impedance because bias-current error can contribute to input-offset voltage in high-impedance sensor circuits. Also confirm stability for the intended capacitive load instead of assuming the amplifier can drive every external load directly.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Use the current manufacturer product page and regulatory documents for compliance declarations specific to the selected orderable suffix.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

OPA364ID datasheet OPA364ID pinout OPA364ID datasheet pdf OPA364ID SOIC-8 OPA364ID 7 MHz op amp OPA364ID rail-to-rail amplifier OPA364ID 1.8V operation OPA364ID sensor amplifier OPA364ID equivalent OPA364ID replacement OPA364ID vs OPA364UID Texas Instruments OPA364ID OPA364ID price OPA364ID stock

関連部品&用語

Texas Instruments OPA364ID OPA364UID OPA364AID OPA364AIDG4 OPA364UIDG4 OPA364IDR operational amplifier CMOS operational amplifier low-voltage operational amplifier rail-to-rail input rail-to-rail output common-mode rejection ratio CMRR gain-bandwidth product sensor amplification signal conditioning analog-to-digital converter battery-powered systems SOIC-8 surface-mount package 1.8 V power supply single-supply operation
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示