OPA704UA - 12V 3MHz Rail-to-Rail Op Amp | Texas Instruments
MPN: OPA704UA ✓ نشطOPA704UA نظرة عامة
An operational amplifier is a high-gain, feedback-controlled analog building block used to amplify, buffer, filter, and compare low-level signals. The OPA704UA belongs to the operational-amplifier hierarchy within analog ICs and semiconductor devices. Its rail-to-rail input and output characteristics allow the signal path to operate across a substantial portion of the supply range, making it useful when the available headroom is limited by system power budgets.
The principal published characteristics include single-amplitude operation, a 12 V supply rating, 3 MHz gain-bandwidth product, rail-to-rail input and output behavior, and an 8-pin SOIC package. These features make the device applicable to sensor interfaces, analog signal conditioning, low-frequency filtering, and general instrumentation. Its single-amplifier configuration keeps the external connection count and board area lower than that of a dual amplifier package.
OPA704UA belongs to the OPA704 family, whose members are also offered in multiple package options. The UA ordering code selects the standard SOIC-8 surface-mount configuration, making it suitable for conventional PCB assembly rather than through-hole insertion. Circuit designers should use the manufacturer pin-description table when assigning supply, input, output, and no-connect pins, particularly when substituting another amplifier in an existing design.
Typical uses include buffering sensor outputs, conditioning signals entering analog-to-digital converters, amplifying low-level instrumentation signals, and implementing active analog filters. The 3 MHz bandwidth provides useful response for moderate-frequency precision applications, while rail-to-rail input and output operation can improve usable signal range in low-voltage systems. Supply topology, output loading, and feedback compensation must still be evaluated against the complete operating requirements.
For PCB implementation, place the device close to the protected signal source and decoupling capacitors, maintain a low-impedance return path, and route sensitive input and feedback traces away from switching nodes. Because the device is an analog amplifier rather than a power semiconductor, safe-operating-area data does not apply. Compliance declarations, detailed electrical limits, and package dimensions should be confirmed from the current manufacturer documentation before production release.
This product record combines the OPA704UA family positioning, verified manufacturer and distributor references, drop-in replacement findings, package details, and engineering guidance. It is intended to accelerate part selection while directing buyers to the manufacturer datasheet and the Request a Quote form for current commercial terms.
بدائل مباشرة لـ OPA704UA — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع OPA704UA (نفس عامل الشكل والبصمة) — يختلف في Gain-Bandwidth Product.
OPA703UA
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←TLV9151
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
OPA704UA الحدود القصوى والخصائص الكهربائية
| Amplifier Type | Single operational amplifier |
| Number of Circuits | 1 circuit |
| Nominal Supply Voltage | 12 V |
| Gain-Bandwidth Product | 3 MHz |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Package Type | 8-pin SOIC |
| نوع التركيب | Surface mount |
تكوين أطراف OPA704UA
| دبوس 1 | NC — Not connected |
| دبوس 2 | IN- — Inverting input |
| دبوس 3 | IN+ — Non-inverting input |
| دبوس 4 | V- — Negative supply connection |
| دبوس 5 | NC — Not connected |
| دبوس 6 | OUT — Output |
| دبوس 7 | V+ — Positive supply connection |
| دبوس 8 | NC — Not connected |
التطبيقات النموذجية
OPA704UA مناسب لـ 6 التطبيقs: Precision Sensor Signal Conditioning, ADC Input Driver, Active Analog Filtering, Audio and Low-Level Audio Buffering, Industrial Instrumentation Amplifier, Test and Measurement Buffer.
Precision Sensor Signal Conditioning
The OPA704UA suits precision sensor interfaces because it combines rail-to-rail input and output operation with a 3 MHz gain-bandwidth product. Place the amplifier close to the sensor output to minimize noise pickup, then use a conventional inverting or non-inverting feedback network to establish the required gain. The 3 MHz bandwidth permits useful closed-loop response beyond low-frequency DC measurements, while the rail-to-rail characteristics can increase usable signal range when supply headroom is constrained. Designers should still verify the exact input common-mode limits, offset, input bias current, and output swing in the manufacturer datasheet. A low-noise reference and grounded return path are essential when the sensor produces only millivolt-level signals.
موصى به
ADC Input Driver
OPA704UA can drive the input stage of an analog-to-digital converter when the signal source has high source impedance or requires gain. Its 3 MHz gain-bandwidth product provides sufficient loop bandwidth for many moderate-speed acquisition paths, while rail-to-rail output behavior helps maximize the available converter input range. Position the amplifier near the ADC input and provide local analog supply bypassing to prevent settling problems. Confirm the ADC’s input capacitance, acquisition time, and settling requirement against the amplifier’s stability and drive characteristics. For high-resolution converters, input-referred noise, offset, and reference-layout errors may dominate performance, so a fast amplifier alone does not guarantee accurate conversion.
موصى به
Active Analog Filtering
The OPA704UA is appropriate for moderate-bandwidth active filters that process low-level analog signals. Its 3 MHz gain-bandwidth product allows a feedback network to realize useful closed-loop response around audio and low-frequency instrumentation ranges, while the single-amplifier SOIC-8 package simplifies point-to-point board routing. Realized gain, noise, and phase margin depend on the selected noise gain and component tolerances, so use the manufacturer’s stability guidance for the exact configuration. Place filter capacitors and feedback resistors close to the amplifier, maintain a quiet ground reference, and avoid long parallel traces that can add parasitic coupling. This makes the device suitable for anti-aliasing, smoothing, and signal-conditioning stages where a passive filter alone would be too weak.
موصى به
Audio and Low-Level Audio Buffering
OPA704UA can buffer low-level audio or communication signals when the source impedance and capacitive loading require an active stage. Rail-to-rail input and output operation allows useful signal swing near the supply limits, and the 3 MHz gain-bandwidth product provides substantially more bandwidth than many precision audio paths require. The single SOIC-8 package keeps the implementation compact and avoids the unused channel of a dual amplifier. Feedback values should be chosen for stability, and output load, supply ripple, and input noise must be checked against the system’s audio bandwidth. If the design also includes digital conversion, isolate the analog return and power paths to prevent switching activity from modulating the buffered signal.
موصى به
Industrial Instrumentation Amplifier
OPA704UA can form part of an industrial instrumentation front end when one signal must be amplified around a mid-supply reference. The 3 MHz gain-bandwidth product supports moderate-frequency process-control signals, and the single-amplifier configuration allows each channel to use its own gain setting and compensation network. For bridge or sensor excitation, the input common-mode range and bias behavior are critical; verify both against the exact OPA704UA limits before committing the design. Keep excitation and sensing traces separated, provide local supply bypassing, and route the amplifier ground directly toward the analog return. Accurate results also depend on low-drift reference components and stable excitation, so the amplifier should not be treated as a substitute for careful front-end isolation and calibration.
موصى به
Test and Measurement Buffer
OPA704UA can serve as a buffer or gain stage in compact test and measurement equipment where a low-level source must drive a higher-impedance measurement chain. The 3 MHz gain-bandwidth product is useful for moderate-bandwidth probes and signal conditioning, while rail-to-rail operation improves utilization of the available supply range. Keep the input path short and use a quiet ground plane to prevent fixture noise from appearing at the amplifier input. Loading, output current, slew rate, and settling must be checked against the intended probe and acquisition circuitry. For precision DC measurements, offset, input bias current, and thermal behavior may determine accuracy more than bandwidth, making careful bias-current budgeting and warm-up management essential.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ OPA704UA — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | OPA703UA | TLV9151 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Amplifier Count | 1 | 1 | 1 |
| Drop-In Relationship | Target device | Same-family SOIC-8 option; direct drop-in status requires comparison | Manufacturer-described drop-in replacement with upgraded functionality |
أبرز الفروقات
- Higher published gain-bandwidth product than the same-family OPA703UA option (مقابلOPA703UA)
- Single amplifier in the standard 8-pin SOIC footprint (مقابلTLV9151)
- Manufacturer-described drop-in relationship supports footprint reuse (مقابلTLV9151)
ملاحظات التصميم
Place OPA704UA close to the signal source and place supply-bypass capacitors directly between the V+ and V- pins and the ground plane. Keep the non-inverting and inverting input paths short, and route the feedback components close to pins 2 and 6. Avoid routing sensitive inputs beneath or parallel to digital, switching, or high-current power traces. A quiet return path is especially important because rail-to-rail inputs can make board-level coupling more visible.
Do not select the replacement amplifier from package shape alone. Before substituting OPA703UA or TLV9151, compare input common-mode range, output swing under the intended load, gain-bandwidth product, slew rate, offset, input bias current, noise, supply current, and stability at the selected noise gain. Pay particular attention to enable-pin behavior and the feedback topology. Validate the completed board at the minimum and maximum expected supply voltages and temperatures.
The 3 MHz gain-bandwidth product does not by itself guarantee accurate settling at a chosen closed-loop gain. Use the manufacturer’s stability and electrical-characteristics guidance to select a noise gain with adequate phase margin, and include realistic output loading and parasitic capacitance in simulation. For ADC drivers, confirm acquisition time and capacitive-load behavior. Where source impedance is high, add an appropriate biasing path without increasing noise more than the signal budget permits.
معلومات الامتثال
Project-specific environmental, quality, and material-compliance declarations should be confirmed through the Texas Instruments product documentation and quote process.