Texas Instruments

OPA704UA - 12V 3MHz Rail-to-Rail Op Amp | Texas Instruments

料号: OPA704UA ✓ 量产中
12 V Vdss 8-pin SOIC Package
最小起订量: 1 |

OPA704UA 概述

The Texas Instruments OPA704UA is a single operational amplifier rated for 12 V supply operation and 3 MHz gain-bandwidth product, with rail-to-rail input and output capability in an 8-pin SOIC package. The OPA704UA provides one amplifier per package and is positioned as a standard general-purpose amplifier for precision signal-conditioning systems.

An operational amplifier is a high-gain, feedback-controlled analog building block used to amplify, buffer, filter, and compare low-level signals. The OPA704UA belongs to the operational-amplifier hierarchy within analog ICs and semiconductor devices. Its rail-to-rail input and output characteristics allow the signal path to operate across a substantial portion of the supply range, making it useful when the available headroom is limited by system power budgets.

The principal published characteristics include single-amplitude operation, a 12 V supply rating, 3 MHz gain-bandwidth product, rail-to-rail input and output behavior, and an 8-pin SOIC package. These features make the device applicable to sensor interfaces, analog signal conditioning, low-frequency filtering, and general instrumentation. Its single-amplifier configuration keeps the external connection count and board area lower than that of a dual amplifier package.

OPA704UA belongs to the OPA704 family, whose members are also offered in multiple package options. The UA ordering code selects the standard SOIC-8 surface-mount configuration, making it suitable for conventional PCB assembly rather than through-hole insertion. Circuit designers should use the manufacturer pin-description table when assigning supply, input, output, and no-connect pins, particularly when substituting another amplifier in an existing design.

Typical uses include buffering sensor outputs, conditioning signals entering analog-to-digital converters, amplifying low-level instrumentation signals, and implementing active analog filters. The 3 MHz bandwidth provides useful response for moderate-frequency precision applications, while rail-to-rail input and output operation can improve usable signal range in low-voltage systems. Supply topology, output loading, and feedback compensation must still be evaluated against the complete operating requirements.

For PCB implementation, place the device close to the protected signal source and decoupling capacitors, maintain a low-impedance return path, and route sensitive input and feedback traces away from switching nodes. Because the device is an analog amplifier rather than a power semiconductor, safe-operating-area data does not apply. Compliance declarations, detailed electrical limits, and package dimensions should be confirmed from the current manufacturer documentation before production release.

This product record combines the OPA704UA family positioning, verified manufacturer and distributor references, drop-in replacement findings, package details, and engineering guidance. It is intended to accelerate part selection while directing buyers to the manufacturer datasheet and the Request a Quote form for current commercial terms.

直接替换替代料: OPA704UA ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: OPA704UA (相同外形与封装尺寸) ——差异在于 Gain-Bandwidth Product.

Texas Instruments
Gain-Bandwidth Product: 1 MHz
对比 OPA704UA →

OPA703UA

✅ 直接替换
Texas Instruments
📦 8-pin SOIC
Single operational amplifier · CMOS · 12 V · ±6 V · 1 MHz · 160 µA · 160 µV · 90 dB

联系询价

查看数据手册 →

TLV9151

✅ 直接替换
📦 8-pin SOIC
Same 8-pin SOIC footprint and manufacturer-described drop-in replacement; upgraded functionality, while detailed electrical differences require direct comparison.

📋 参考替代料(不在目录中)

OPA704UA 最大额定值与电气特性

Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Nominal Supply Voltage 12 V
Gain-Bandwidth Product 3 MHz
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Package Type 8-pin SOIC
安装类型 Surface mount

OPA704UA 引脚配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
引脚 1 NC — Not connected
引脚 2 IN- — Inverting input
引脚 3 IN+ — Non-inverting input
引脚 4 V- — Negative supply connection
引脚 5 NC — Not connected
引脚 6 OUT — Output
引脚 7 V+ — Positive supply connection
引脚 8 NC — Not connected

典型应用

OPA704UA 适用于 6 应用s: Precision Sensor Signal Conditioning, ADC Input Driver, Active Analog Filtering, Audio and Low-Level Audio Buffering, Industrial Instrumentation Amplifier, Test and Measurement Buffer.

🧩

Precision Sensor Signal Conditioning

The OPA704UA suits precision sensor interfaces because it combines rail-to-rail input and output operation with a 3 MHz gain-bandwidth product. Place the amplifier close to the sensor output to minimize noise pickup, then use a conventional inverting or non-inverting feedback network to establish the required gain. The 3 MHz bandwidth permits useful closed-loop response beyond low-frequency DC measurements, while the rail-to-rail characteristics can increase usable signal range when supply headroom is constrained. Designers should still verify the exact input common-mode limits, offset, input bias current, and output swing in the manufacturer datasheet. A low-noise reference and grounded return path are essential when the sensor produces only millivolt-level signals.

📺

ADC Input Driver

OPA704UA can drive the input stage of an analog-to-digital converter when the signal source has high source impedance or requires gain. Its 3 MHz gain-bandwidth product provides sufficient loop bandwidth for many moderate-speed acquisition paths, while rail-to-rail output behavior helps maximize the available converter input range. Position the amplifier near the ADC input and provide local analog supply bypassing to prevent settling problems. Confirm the ADC’s input capacitance, acquisition time, and settling requirement against the amplifier’s stability and drive characteristics. For high-resolution converters, input-referred noise, offset, and reference-layout errors may dominate performance, so a fast amplifier alone does not guarantee accurate conversion.

🔧

Active Analog Filtering

The OPA704UA is appropriate for moderate-bandwidth active filters that process low-level analog signals. Its 3 MHz gain-bandwidth product allows a feedback network to realize useful closed-loop response around audio and low-frequency instrumentation ranges, while the single-amplifier SOIC-8 package simplifies point-to-point board routing. Realized gain, noise, and phase margin depend on the selected noise gain and component tolerances, so use the manufacturer’s stability guidance for the exact configuration. Place filter capacitors and feedback resistors close to the amplifier, maintain a quiet ground reference, and avoid long parallel traces that can add parasitic coupling. This makes the device suitable for anti-aliasing, smoothing, and signal-conditioning stages where a passive filter alone would be too weak.

🎧

Audio and Low-Level Audio Buffering

OPA704UA can buffer low-level audio or communication signals when the source impedance and capacitive loading require an active stage. Rail-to-rail input and output operation allows useful signal swing near the supply limits, and the 3 MHz gain-bandwidth product provides substantially more bandwidth than many precision audio paths require. The single SOIC-8 package keeps the implementation compact and avoids the unused channel of a dual amplifier. Feedback values should be chosen for stability, and output load, supply ripple, and input noise must be checked against the system’s audio bandwidth. If the design also includes digital conversion, isolate the analog return and power paths to prevent switching activity from modulating the buffered signal.

🏭

Industrial Instrumentation Amplifier

OPA704UA can form part of an industrial instrumentation front end when one signal must be amplified around a mid-supply reference. The 3 MHz gain-bandwidth product supports moderate-frequency process-control signals, and the single-amplifier configuration allows each channel to use its own gain setting and compensation network. For bridge or sensor excitation, the input common-mode range and bias behavior are critical; verify both against the exact OPA704UA limits before committing the design. Keep excitation and sensing traces separated, provide local supply bypassing, and route the amplifier ground directly toward the analog return. Accurate results also depend on low-drift reference components and stable excitation, so the amplifier should not be treated as a substitute for careful front-end isolation and calibration.

📡

Test and Measurement Buffer

OPA704UA can serve as a buffer or gain stage in compact test and measurement equipment where a low-level source must drive a higher-impedance measurement chain. The 3 MHz gain-bandwidth product is useful for moderate-bandwidth probes and signal conditioning, while rail-to-rail operation improves utilization of the available supply range. Keep the input path short and use a quiet ground plane to prevent fixture noise from appearing at the amplifier input. Loading, output current, slew rate, and settling must be checked against the intended probe and acquisition circuitry. For precision DC measurements, offset, input bias current, and thermal behavior may determine accuracy more than bandwidth, making careful bias-current budgeting and warm-up management essential.

What are the key specifications of OPA704UA that engineers should know?
The OPA704UA is a single, general-purpose operational amplifier with a 12 V nominal supply, 3 MHz gain-bandwidth product, and rail-to-rail input and output capability in an 8-pin SOIC package. According to the Texas Instruments OPA704 product page, the OPA704 family supports a single-amplifier configuration and is available in several package styles; the UA ordering code identifies the SOIC-8 version. Use the family datasheet for detailed electrical limits, noise, stability, and thermal information.
What type of operational amplifier is the OPA704UA?
The OPA704UA is a single-amplifier CMOS operational amplifier with rail-to-rail input and output operation. The Texas Instruments product page identifies the OPA704 as a single, 12 V, 3 MHz operational amplifier, while the OPA704UA ordering information identifies an 8-pin SOIC package. It is intended for general-purpose precision analog signal-conditioning applications where rail-to-rail signal access and a moderate gain-bandwidth product are useful.
Where can I download the OPA704UA datasheet PDF?
The official OPA704UA datasheet is available through the Texas Instruments OPA704 document link at https://www.ti.com/lit/gpn/OPA704. The manufacturer product page at https://www.ti.com/product/OPA704 provides ordering information, parametric data, and access to supporting documents. Use the manufacturer document for the authoritative pin description, electrical characteristics, application guidance, and package drawing.
Where can I find the OPA704UA pinout?
The OPA704UA pinout is documented in the pin-configuration section of the Texas Instruments OPA704 datasheet. The device uses an 8-pin SOIC package, and engineers should assign pins according to the manufacturer table rather than relying only on generic amplifier conventions. The documented eight positions include the two inputs, output, positive and negative supply connections, and positions marked as no-connect.
Is the OPA704UA suitable for rail-to-rail signal conditioning?
Yes, the OPA704UA is suitable for rail-to-rail signal conditioning because its published input and output characteristics are described as rail-to-rail. According to the Texas Instruments OPA704 product page, the device is a single 12 V, 3 MHz amplifier. The rail-to-rail designation does not eliminate the need to verify the exact common-mode range, output swing, load, and supply limits in the manufacturer datasheet.
What is the gain-bandwidth product of the OPA704UA?
The OPA704UA has a published gain-bandwidth product of 3 MHz. The Texas Instruments OPA704 product page describes the OPA704 family as a single 12 V, 3 MHz operational amplifier. This bandwidth is appropriate for moderate-speed closed-loop signal conditioning, but the maximum stable feedback configuration and usable precision at a selected noise-gain setting should be confirmed from the manufacturer stability and electrical-characteristics information.
OPA704UA vs OPA703UA: which is the better choice?
Choose the OPA704UA when its 3 MHz gain-bandwidth product matches the required signal bandwidth and accuracy; the OPA703UA is a distinct single-amplifier member of the same TI family. Both are associated with the 8-pin SOIC family offering, but exact offset, noise, slew-rate, and operating-temperature details must be compared for the selected ordering codes. Texas Instruments’ OPA704 product information is the appropriate starting point for that comparison.
What is the best drop-in replacement for OPA704UA?
The TLV9151 is identified by Texas Instruments as a drop-in replacement with upgraded functionality for the compared device. Both the OPA704UA and TLV9151 use an 8-pin SOIC format, allowing a footprint-compatible substitution when the designer checks enable, bias, supply, and stability requirements. The TI OPA704 product page is the appropriate source for confirming the replacement relationship and the manufacturer’s comparison guidance.
Can TLV9151 replace OPA704UA in an existing PCB?
The TLV9151 can be a footprint-compatible replacement for the OPA704UA because Texas Instruments identifies it as a drop-in replacement and the verified product information associates both devices with 8-pin SOIC packages. Before production substitution, verify supply range, offset, bandwidth, slew rate, input bias behavior, output drive, noise, and noise-gain stability. PCB compatibility alone does not prove electrical equivalence in every feedback network.
When should I choose OPA704UA over TLV9151?
Choose the OPA704UA when an existing design has already been qualified around the OPA704 family’s electrical behavior and changing the amplifier would require additional validation. Choose the TLV9151 when its manufacturer-defined drop-in relationship and upgraded functionality address a design objective while preserving the 8-pin SOIC footprint. The final decision should include a side-by-side review of bandwidth, noise, offset, power, and stability.
Where can I buy OPA704UA online?
Use the Request a Quote form on this page to ask for OPA704UA availability, commercial terms, and the correct package or reel configuration. The verified product references identify the manufacturer part number as OPA704UA, but current stock, lot traceability, and lead time should be confirmed through the quote process. This avoids selecting a mismatched suffix or ordering configuration.
What is the price of OPA704UA?
The current commercial price for OPA704UA is presented through the Request a Quote form on this page. The verified listing references confirm that OPA704UA is catalogued in an 8-pin SOIC package, but quote-based pricing may vary with quantity, packaging, manufacturer lead time, and traceability requirements. Submit the required quantity and target date to obtain the applicable quotation.
What is the lead time for OPA704UA?
The current lead time for OPA704UA should be confirmed through the Request a Quote form on this page. Texas Instruments identifies the OPA704UA as an ordering option for the OPA704 family, and the verified distribution references indicate catalog availability, but a usable production date depends on quantity, package form, and supply conditions. Provide your forecast quantity and required date in the quote request.
Is OPA704UA in stock?
Use the Request a Quote form on this page for the current OPA704UA stock position. The verified manufacturer and distributor references identify the part, while individual inventory levels can change by package, reel quantity, and order date. A quotation response should confirm the available quantity and expected delivery for the exact OPA704UA ordering code.
Is OPA704UA active for new designs?
The Texas Instruments OPA704 product page presents the OPA704 as an active family offering and identifies OPA704UA as a purchasable ordering option. This supports using the OPA704UA for new industrial, instrumentation, and general-purpose analog designs. Always check the ordering table and product-change notifications for the latest lifecycle and ordering information before committing a production BOM.
What compliance documents are available for OPA704UA?
Compliance information for OPA704UA should be confirmed from the Texas Instruments product page and the current manufacturer documentation, including RoHS and REACH declarations when available. The product references also mention the availability notice, standard warranty, and use of TI semiconductor products in critical applications. Request project-specific environmental and quality documentation through the manufacturer or the Request a Quote process.
What are the common mistakes when designing an OPA704UA circuit?
The most common design risks are incorrect pin assignment, unstable feedback compensation, inadequate supply bypassing, and using the amplifier outside its specified common-mode or output range. Keep input, feedback, and ground paths short, place decoupling capacitors near the supply pins, and verify the required noise gain against the manufacturer’s stability guidance. OPA704UA is a surface-mount 8-pin SOIC device, so assembly and solder-joint quality also affect analog performance.

工程参考数据: OPA704UA ——对比、设计指导和合规信息。

选型指南

Choose the OPA704UA when your design needs a single rail-to-rail input and output amplifier with a 3 MHz gain-bandwidth product in the standard 8-pin SOIC package, particularly for moderate-speed sensor conditioning, ADC interfaces, and active filters. Choose OPA703UA when the same family, SOIC-8 footprint, and single-amplifier configuration are required but its lower bandwidth better matches the intended signal path. Choose TLV9151 when Texas Instruments’ manufacturer-described drop-in relationship and upgraded functionality are important, while accepting that its 16 V nominal supply and 4.5 MHz gain-bandwidth product differ from the OPA704UA’s published characteristics. For either alternative, compare common-mode range, offset, bias current, noise, output drive, stability, and power consumption before production substitution. PCB footprint compatibility simplifies assembly, but it does not eliminate the need for circuit-level validation.

与替代料对比

参数 本产品 OPA703UA TLV9151
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Count 1 1 1
Drop-In Relationship Target device Same-family SOIC-8 option; direct drop-in status requires comparison Manufacturer-described drop-in replacement with upgraded functionality

关键差异点

  • Higher published gain-bandwidth product than the same-family OPA703UA option (对比 OPA703UA)
  • Single amplifier in the standard 8-pin SOIC footprint (对比 TLV9151)
  • Manufacturer-described drop-in relationship supports footprint reuse (对比 TLV9151)

设计说明

Place OPA704UA close to the signal source and place supply-bypass capacitors directly between the V+ and V- pins and the ground plane. Keep the non-inverting and inverting input paths short, and route the feedback components close to pins 2 and 6. Avoid routing sensitive inputs beneath or parallel to digital, switching, or high-current power traces. A quiet return path is especially important because rail-to-rail inputs can make board-level coupling more visible.

Do not select the replacement amplifier from package shape alone. Before substituting OPA703UA or TLV9151, compare input common-mode range, output swing under the intended load, gain-bandwidth product, slew rate, offset, input bias current, noise, supply current, and stability at the selected noise gain. Pay particular attention to enable-pin behavior and the feedback topology. Validate the completed board at the minimum and maximum expected supply voltages and temperatures.

The 3 MHz gain-bandwidth product does not by itself guarantee accurate settling at a chosen closed-loop gain. Use the manufacturer’s stability and electrical-characteristics guidance to select a noise gain with adequate phase margin, and include realistic output loading and parasitic capacitance in simulation. For ADC drivers, confirm acquisition time and capacitive-load behavior. Where source impedance is high, add an appropriate biasing path without increasing noise more than the signal budget permits.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Project-specific environmental, quality, and material-compliance declarations should be confirmed through the Texas Instruments product documentation and quote process.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

OPA704UA datasheet OPA704UA specifications OPA704UA pinout OPA704UA datasheet pdf Texas Instruments OPA704UA OPA704UA 3MHz amplifier OPA704UA 8-SOIC OPA704UA rail-to-rail op amp OPA704UA equivalent OPA704UA replacement OPA704UA vs OPA703UA OPA704UA vs TLV9151 OPA704UA price OPA704UA stock OPA704UA sensor signal conditioning

相关元器件 & 术语

Texas Instruments OPA704UA OPA704 OPA703UA TLV9151 operational amplifier op amp analog IC semiconductor CMOS rail-to-rail input rail-to-rail output gain-bandwidth product signal conditioning active filter ADC input driver sensor interface instrumentation amplifier precision analog SOIC-8 surface-mount package SMD feedback RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情