PCM1728EG4 - 24-Bit 96kHz Stereo Audio DAC | TI
MPN: PCM1728EG4 ✓ نشطPCM1728EG4 نظرة عامة
A digital-to-analog converter, or DAC, is a semiconductor that converts digital audio samples into left and right analog voltage signals. In the broader hierarchy, it belongs to the ADC/DAC family within integrated circuits and serves as the bridge between a digital audio source such as a receiver, processor, or interface and an analog amplifier, mixer, or loudspeaker system. PCM1728EG4 supports the common I2S format for serial digital audio transmission.
The primary specifications are 24-bit resolution, a maximum sampling rate of 96kHz, stereo operation, and 106dB SNR. These figures make the converter suitable for consumer audio equipment, digital media systems, and compact stereo playback designs. The 5V operating supply and 28-SSOP surface-mount format support conventional analog-audio board layouts where a compact multibit conversion stage is required.
This device separates digital audio ingestion from the analog output stage. I2S data, clock, and word-select signals enter the converter, while separate left and right analog outputs are produced for downstream amplification. The 96kHz sampling capability accommodates source material encoded at 48kHz through 96kHz rates, and the 24-bit interface represents the numerical precision of each audio sample.
Typical applications include stereo CD or DVD playback electronics, digital audio receivers, active speakers, karaoke equipment, and digital mixer output modules. It can also serve as a local decoding stage in a receiver that accepts digital audio from a source processor. In each case, the converter is placed after the digital audio routing network and before the analog volume-control or amplifier circuitry.
PCB design should provide a clean digital return path to the converter and decouple the 5V supply close to the power pin. Analog output routing should be kept short and physically separated from digital clock and data traces. Output filtering and downstream amplifier selection remain important because the DAC's measured 106dB SNR establishes the converter-stage noise baseline for the complete audio path.
This product page consolidates the PCM1728EG4's principal format, resolution, sampling-rate, package, and SNR characteristics with verified sourcing information, equivalent-part guidance, and practical design considerations. It is intended to help engineers identify the correct converter, plan its implementation, and evaluate whether its electrical and packaging characteristics fit a stereo audio design.
بدائل مباشرة لـ PCM1728EG4 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع PCM1728EG4 (نفس عامل الشكل والبصمة) — يختلف في Maximum Sampling Rate, Device Type, Output Type, Package Type, Process Technology.
PCM1798DBR
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PCM1792DBR
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←PCM1794DBR
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←PCM1796DBR
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←PCM1690DBR
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
PCM1728EG4 الحدود القصوى والخصائص الكهربائية
| Device Type | Stereo audio digital-to-analog converter |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 96kHz |
| Channel Configuration | 2-channel stereo |
| Digital Audio Interface | I2S |
| جهد التغذية | 5V |
| Signal-to-Noise Ratio | 106dB |
| Package Type | 28-SSOP |
| Package Width | 0.209 inch (5.30mm) |
| نوع التركيب | Surface mount |
| نوع الخرج | Stereo analog audio |
دليل تكوين أطراف PCM1728EG4 0.209 inch (5.30mm)
تكوين الأطراف لـ PCM1728EG4 (حزمة 0.209 inch (5.30mm)). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ PCM1728EG4.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
PCM1728EG4 مناسب لـ 6 التطبيقs: Digital Audio Receiver, CD and DVD Player Output, Active Speaker Interface, Digital Mixer Output Module, Digital Karaoke Processor, Compact Digital Audio Source.
Digital Audio Receiver
The PCM1728EG4 fits the stereo DAC stage of a digital audio receiver because it accepts I2S data and converts two channels with 24-bit resolution at rates up to 96kHz. Place it after the digital source processor and before the analog volume-control or amplifier path. Its 106dB SNR establishes a clear converter-stage noise baseline, while the 5V supply and 28-SSOP package support conventional receiver-board implementation. Confirm analog output levels and filter requirements in the manufacturer datasheet before finalizing the output network.
موصى به
CD and DVD Player Output
A PCM1728EG4 can convert decoded 24-bit digital audio into left and right analog signals in CD, DVD, or media-player equipment. The 96kHz maximum sampling rate supports common high-rate source formats, and the I2S interface provides a conventional serial-audio connection to a decoder or digital transport. The 106dB SNR is useful when preserving low-level content through the conversion stage. The converter requires a stable 5V rail and careful separation between digital inputs and analog outputs on the PCB.
موصى به
Active Speaker Interface
The PCM1728EG4 is suitable for an active-speaker interface that receives digital audio and drives a downstream power amplifier. Its I2S input permits direct connection to a digital audio processor, while the stereo outputs provide separate left and right analog channels. The 24-bit format and 96kHz rate support detailed digital source material, and the 106dB SNR helps prevent converter noise from limiting system performance. Place the DAC close to the analog output routing and isolate digital clock lines from the low-level audio path.
موصى به
Digital Mixer Output Module
The PCM1728EG4 can provide a high-resolution stereo output channel in a digital mixer or rack-mounted audio processor. A system controller can route 24-bit audio at up to 96kHz over I2S, after which the converter creates left and right analog signals for an external amplifier or line-level output. Its 106dB SNR supports quiet conversion in a multi-path signal chain. Keep the converter's 5V rail well decoupled and provide an appropriate analog return path to minimize coupling from mixer control and display circuitry.
موصى به
Digital Karaoke Processor
The PCM1728EG4 is appropriate for a digital karaoke processor that accepts digital program audio and requires separate analog left and right outputs. The I2S interface supports a compact connection to a digital mixer or codec, while 24-bit resolution and the 96kHz sampling ceiling accommodate modern digital audio sources. Its 106dB SNR supports clean playback and avoids adding substantial converter-stage noise. The analog output path should be evaluated for required gain, filtering, and channel balance before connection to the following amplifier.
موصى به
Compact Digital Audio Source
The PCM1728EG4 can serve as the conversion element in a compact digital audio source such as a network streamer, USB audio accessory, or standalone decoder. A digital interface supplies I2S audio at up to 96kHz, and the converter produces balanced or unbalanced analog outputs according to the board's output network. The 28-SSOP package helps preserve board area, while the 5V supply simplifies integration with conventional analog sections. Thermal performance is generally modest, but supply decoupling and analog grounding remain essential to preserve the 106dB SNR benefit.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ PCM1728EG4 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | PCM1798DBR | PCM1792DBR | PCM1794DBR | PCM1796DBR | PCM1690DBR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-SSOP | 28-SSOP | 28-SSOP | 28-SSOP | 28-SSOP | 28-SSOP |
أبرز الفروقات
- Defined high-resolution stereo conversion rate (مقابلPCM1798DBR)
- Direct I2S interface for digital audio designs (مقابلPCM1754DBQR)
- Compact 28-SSOP implementation (مقابلPCM1690DBR)
ملاحظات التصميم
Place the PCM1728EG4 close to the source of its 5V supply and follow the manufacturer datasheet's recommended decoupling arrangement. Route the I2S clock, data, and word-select signals as controlled digital traces, but keep them away from the left and right analog outputs. A continuous ground reference under the analog section will reduce the chance that switching and clock energy appears as audible or measurable noise.
Treat the I2S clock as the highest-speed digital signal connected to the converter and review its routing for reflection and crosstalk. Keep the clock path away from analog output nodes, avoid unnecessary stubs, and use a continuous reference plane where practical. The PCM1728EG4's 96kHz audio rate does not imply that every associated interface signal is limited to 96kHz, so external circuitry must satisfy the actual clock frequency.
Do not treat a shared package family as proof that every PCM1728, PCM179x, or PCM1690 device is pin-to-pin compatible. Before substituting an alternative, compare the manufacturer pin tables for power, ground, clock, data, word-select, mute, and analog outputs. Also confirm sampling-rate limits, output amplitude, and filter requirements so a mechanically similar replacement does not create a functional mismatch.
Use the 106dB SNR specification as a converter-stage benchmark rather than assuming it guarantees the same noise floor in the finished product. External resistors, output filters, ground contamination, supply ripple, and downstream amplifier noise can dominate system performance. Evaluate the complete analog signal chain and keep the PCM1728EG4 output path short and appropriately terminated.
معلومات الامتثال
The PCM1728EG4 is an audio converter IC, so AEC-Q100 qualification is not applicable as an automotive qualification claim. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation or declaration.