Texas Instruments

PCM1728EG4 - 24-Bit 96kHz Stereo Audio DAC | TI

MPN: PCM1728EG4 ✓ Aktif
5V Vdss 28-SSOP Package
MOQ: 1 |

PCM1728EG4 Ringkasan

The Texas Instruments PCM1728EG4 is a 24-bit, 96kHz stereo audio digital-to-analog converter with I2S serial input, 106dB signal-to-noise ratio, and a 5V supply requirement, housed in a 28-SSOP package measuring 0.209 inches wide and 5.30mm. It is designed for digital audio systems that require a dedicated stereo DAC stage with a high-resolution data path.

A digital-to-analog converter, or DAC, is a semiconductor that converts digital audio samples into left and right analog voltage signals. In the broader hierarchy, it belongs to the ADC/DAC family within integrated circuits and serves as the bridge between a digital audio source such as a receiver, processor, or interface and an analog amplifier, mixer, or loudspeaker system. PCM1728EG4 supports the common I2S format for serial digital audio transmission.

The primary specifications are 24-bit resolution, a maximum sampling rate of 96kHz, stereo operation, and 106dB SNR. These figures make the converter suitable for consumer audio equipment, digital media systems, and compact stereo playback designs. The 5V operating supply and 28-SSOP surface-mount format support conventional analog-audio board layouts where a compact multibit conversion stage is required.

This device separates digital audio ingestion from the analog output stage. I2S data, clock, and word-select signals enter the converter, while separate left and right analog outputs are produced for downstream amplification. The 96kHz sampling capability accommodates source material encoded at 48kHz through 96kHz rates, and the 24-bit interface represents the numerical precision of each audio sample.

Typical applications include stereo CD or DVD playback electronics, digital audio receivers, active speakers, karaoke equipment, and digital mixer output modules. It can also serve as a local decoding stage in a receiver that accepts digital audio from a source processor. In each case, the converter is placed after the digital audio routing network and before the analog volume-control or amplifier circuitry.

PCB design should provide a clean digital return path to the converter and decouple the 5V supply close to the power pin. Analog output routing should be kept short and physically separated from digital clock and data traces. Output filtering and downstream amplifier selection remain important because the DAC's measured 106dB SNR establishes the converter-stage noise baseline for the complete audio path.

This product page consolidates the PCM1728EG4's principal format, resolution, sampling-rate, package, and SNR characteristics with verified sourcing information, equivalent-part guidance, and practical design considerations. It is intended to help engineers identify the correct converter, plan its implementation, and evaluate whether its electrical and packaging characteristics fit a stereo audio design.

Alternatif penggantian untuk PCM1728EG4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian PCM1728EG4 (sama faktor bentuk dan footprint) — berbeda di dalam Maximum Sampling Rate, Device Type, Output Type, Package Type, Process Technology.

Texas Instruments
Maximum Sampling Rate: 192 kHz
Package Type: 28-lead SSOP
Process Technology: CMOS
Bandingkan dengan PCM1728EG4 →
Texas Instruments
Maximum Sampling Rate: 192 kHz
Device Type: Stereo audio digital-to-analog converter (DAC)
Output Type: Balanced current output (differential)
Bandingkan dengan PCM1728EG4 →

PCM1798DBR

✅ Drop-In
📦 28-SSOP
Same manufacturer and 28-SSOP class; PCM1728EG4 is specified at 96kHz and 106dB SNR, while PCM1798DBR family sampling-rate and SNR values require confirmation before substitution.

📋 Alternatif referensi (tidak dalam katalog)

PCM1792DBR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 28-SSOP
Stereo digital-to-analog converter · 24 bit · 192kHz · 132dB · 129dB · 127dB · 0.0004% · 7.8mA peak-to-peak

Kontak untuk harga

Lihat Datasheet →

PCM1794DBR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 28-SSOP
Stereo audio digital-to-analog converter · 24 bit · 192 kHz · I2S · 132 dB · 2 channels · 28-lead SSOP · SSOP

Kontak untuk harga

Lihat Datasheet →

PCM1796DBR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 28-SSOP
Stereo audio digital-to-analog converter (DAC) · 24 bit · 192 kHz · Up to 200 kHz DSD · 2 (stereo) · Advanced segment DAC · Balanced current output (differential) · Serial 3-wire (LRCK, BCK, DATA)

Kontak untuk harga

Lihat Datasheet →

PCM1690DBR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 28-SSOP
Same-brand stereo-DAC family in a 28-SSOP footprint; PCM1728EG4 is explicitly 96kHz with 106dB SNR, while PCM1690DBR output format and rate limits need verification.

📋 Alternatif referensi (tidak dalam katalog)

PCM1728EG4 Rating Maksimal & Karakteristik Listrik

Device Type Stereo audio digital-to-analog converter
Converter Resolution 24 bit
Maximum Sampling Rate 96kHz
Channel Configuration 2-channel stereo
Digital Audio Interface I2S
Tegangan Pemuat 5V
Signal-to-Noise Ratio 106dB
Package Type 28-SSOP
Package Width 0.209 inch (5.30mm)
Tipe Mounting Surface mount
Tipe Output Stereo analog audio

PCM1728EG4 0.209 inch (5.30mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk PCM1728EG4 (0.209 inch (5.30mm) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 0.209 inch (5.30mm) untuk PCM1728EG4

Tidak ada data diatribut pin yang tersedia untuk PCM1728EG4.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

PCM1728EG4 cocok untuk 6 aplikasis: Digital Audio Receiver, CD and DVD Player Output, Active Speaker Interface, Digital Mixer Output Module, Digital Karaoke Processor, Compact Digital Audio Source.

🎧

Digital Audio Receiver

The PCM1728EG4 fits the stereo DAC stage of a digital audio receiver because it accepts I2S data and converts two channels with 24-bit resolution at rates up to 96kHz. Place it after the digital source processor and before the analog volume-control or amplifier path. Its 106dB SNR establishes a clear converter-stage noise baseline, while the 5V supply and 28-SSOP package support conventional receiver-board implementation. Confirm analog output levels and filter requirements in the manufacturer datasheet before finalizing the output network.

📺

CD and DVD Player Output

A PCM1728EG4 can convert decoded 24-bit digital audio into left and right analog signals in CD, DVD, or media-player equipment. The 96kHz maximum sampling rate supports common high-rate source formats, and the I2S interface provides a conventional serial-audio connection to a decoder or digital transport. The 106dB SNR is useful when preserving low-level content through the conversion stage. The converter requires a stable 5V rail and careful separation between digital inputs and analog outputs on the PCB.

🔊

Active Speaker Interface

The PCM1728EG4 is suitable for an active-speaker interface that receives digital audio and drives a downstream power amplifier. Its I2S input permits direct connection to a digital audio processor, while the stereo outputs provide separate left and right analog channels. The 24-bit format and 96kHz rate support detailed digital source material, and the 106dB SNR helps prevent converter noise from limiting system performance. Place the DAC close to the analog output routing and isolate digital clock lines from the low-level audio path.

🎚️

Digital Mixer Output Module

The PCM1728EG4 can provide a high-resolution stereo output channel in a digital mixer or rack-mounted audio processor. A system controller can route 24-bit audio at up to 96kHz over I2S, after which the converter creates left and right analog signals for an external amplifier or line-level output. Its 106dB SNR supports quiet conversion in a multi-path signal chain. Keep the converter's 5V rail well decoupled and provide an appropriate analog return path to minimize coupling from mixer control and display circuitry.

🎤

Digital Karaoke Processor

The PCM1728EG4 is appropriate for a digital karaoke processor that accepts digital program audio and requires separate analog left and right outputs. The I2S interface supports a compact connection to a digital mixer or codec, while 24-bit resolution and the 96kHz sampling ceiling accommodate modern digital audio sources. Its 106dB SNR supports clean playback and avoids adding substantial converter-stage noise. The analog output path should be evaluated for required gain, filtering, and channel balance before connection to the following amplifier.

🖥️

Compact Digital Audio Source

The PCM1728EG4 can serve as the conversion element in a compact digital audio source such as a network streamer, USB audio accessory, or standalone decoder. A digital interface supplies I2S audio at up to 96kHz, and the converter produces balanced or unbalanced analog outputs according to the board's output network. The 28-SSOP package helps preserve board area, while the 5V supply simplifies integration with conventional analog sections. Thermal performance is generally modest, but supply decoupling and analog grounding remain essential to preserve the 106dB SNR benefit.

Ringkasan Produk Direkomendasikan

PCM1798DBR Related stereo audio DAC comparison candidate Digunakan di dalam: Digital Audio Receiver, CD and DVD Player Output, Digital Mixer Output Module, Compact Digital Audio Source PCM1754DBQR Related Texas Instruments stereo DAC Digunakan di dalam: Digital Audio Receiver, Digital Karaoke Processor PCM1794DBR Texas Instruments Digunakan di dalam: CD and DVD Player Output, Digital Karaoke Processor PCM1792DBR Texas Instruments Digunakan di dalam: Active Speaker Interface PCM1796DBR Texas Instruments Digunakan di dalam: Active Speaker Interface PCM1690DBR Same-manufacturer stereo DAC candidate Digunakan di dalam: Digital Mixer Output Module, Compact Digital Audio Source
What is the PCM1728EG4?
The PCM1728EG4 is a Texas Instruments 24-bit stereo audio digital-to-analog converter operating at up to 96kHz with an I2S digital audio interface. According to the manufacturer datasheet, it accepts digital stereo audio and produces analog left and right output signals. The device operates from 5V and is packaged in a 28-SSOP package measuring 0.209 inches wide and 5.30mm.
Where can I download the PCM1728EG4 datasheet PDF?
The PCM1728EG4 datasheet PDF can be downloaded from Texas Instruments through the official product-document link on this page. The document identifies the IC as a 24-bit, 96kHz stereo audio DAC with I2S input and a 28-SSOP package. Use the pin-description table in the manufacturer datasheet when assigning connector, supply, ground, and analog-output connections.
What is the pinout of PCM1728EG4?
The PCM1728EG4 uses a 28-SSOP package with all 28 physical positions defined in the manufacturer pinout. Its interface includes I2S audio data, clock, word-select, supply, ground, and analog-output functions. Use the numbered pin-description table in the Texas Instruments datasheet as the authoritative assignment guide when routing the PCB.
What are the key specifications of PCM1728EG4 that engineers should know?
The PCM1728EG4 combines 24-bit resolution, a 96kHz maximum sampling rate, two-channel stereo operation, an I2S interface, a 5V supply, and a 106dB signal-to-noise ratio in a 28-SSOP package. According to the manufacturer datasheet, these characteristics define it as a dedicated stereo audio DAC for equipment converting digital audio into left and right analog outputs.
Can PCM1728EG4 be used in a digital audio receiver?
Yes, the PCM1728EG4 is suitable for the stereo DAC stage of a digital audio receiver. Its I2S interface accepts digital audio from a source processor, while the converter produces left and right analog outputs for a volume-control and amplifier stage. The 96kHz maximum rate supports high-rate source formats, and the 106dB SNR provides a defined noise baseline.
Where can I buy PCM1728EG4 and check current availability?
Use the Request a Quote form on this page to ask about PCM1728EG4 availability, current unit pricing, minimum order quantity, and expected lead time. The part is a 24-bit, 96kHz stereo I2S audio DAC in a 28-SSOP package. A written quotation allows the exact package suffix and requested production quantity to be confirmed before procurement.
What is the price of PCM1728EG4?
Current PCM1728EG8 pricing is handled through the Request a Quote form on this page rather than a static price table. Submit the required quantity and the exact MPN, PCM1728EG4, to obtain a current quotation. The device is specified as a 24-bit, 96kHz stereo audio DAC in a 28-SSOP package for I2S-based audio designs.
What is the lead time for PCM1728EG4?
Request the current PCM1728EG4 lead time through the Request a Quote form on this page. Include your production quantity, required ship date, and any packaging preference with the inquiry. The exact MPN identifies a 28-SSOP, 24-bit, 96kHz stereo DAC with I2S input, allowing the quote to be matched to the required device configuration.
Is PCM1728EG4 in stock?
Current stock for PCM1728EG4 should be confirmed through the Request a Quote form on this page. Provide the required quantity and intended shipment date so the exact 28-SSOP suffix can be checked. The manufacturer part is a 5V, 24-bit stereo audio DAC supporting I2S data and sampling rates up to 96kHz.
What is the difference between PCM1728EG4 and PCM1798DBR?
PCM1728EG4 and PCM1798DBR are both Texas Instruments stereo audio DACs associated with the 28-SSOP package family, but their interface and performance details should be compared before substitution. PCM1728EG4 is explicitly identified as 24-bit, 96kHz, I2S, and 106dB SNR. Consult the pin and electrical tables for both devices before treating PCM1798DBR as a drop-in replacement.
When should I choose PCM1728EG4 over PCM1754DBQR?
Choose PCM1728EG4 when the design specifically requires a 24-bit, 96kHz stereo DAC with an I2S interface in a 28-SSOP package. PCM1754DBQR is a different stereo DAC family, and its package, pin assignment, supply arrangement, and digital interface must be verified against the target board. Use the manufacturer comparison data before attempting a footprint-level substitution.
What can replace PCM1728EG4?
PCM1798DBR is the closest same-manufacturer candidate identified for comparison with PCM1728EG4, while PCM1792DBR, PCM1794DBR, PCM1796DBR, and PCM1690DBR are related Texas Instruments stereo-DAC options. A true drop-in replacement still requires identical pin functions, electrical limits, and package geometry. Verify the manufacturer datasheets and compare every power and signal pin before production use.
Is PCM1728EG4 suitable for an active-speaker amplifier?
The PCM1728EG4 can serve as the digital-to-analog stage ahead of an active-speaker amplifier when the source provides compatible I2S audio. Its 24-bit resolution, 96kHz maximum sampling rate, and 106dB SNR suit stereo playback systems. The downstream amplifier and output filter must be designed around the converter's analog output characteristics and power-supply requirements.
What power and layout considerations apply to PCM1728EG4?
The PCM1728EG4 requires a 5V supply, so the supply rail should be decoupled close to the device with routing chosen to minimize noise coupling into the analog section. According to the manufacturer datasheet, the converter uses I2S signals for digital audio. Keep clock and data traces away from analog outputs, provide a continuous return path, and follow the recommended decoupling layout.
How should PCM1728EG4 and PCM1754DBQR be compared for replacement?
Compare PCM1728EG4 and PCM1754DBQR by first checking package size and pin count, then matching power, ground, clock, data, word-select, and analog-output functions. PCM1728EG4 is documented as a 24-bit, 96kHz I2S stereo DAC in 28-SSOP, while PCM1754DBQR belongs to a different family. A board redesign may be required unless its manufacturer documentation proves pin-to-pin equivalence.

Data referensi engineering untuk PCM1728EG4 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose PCM1728EG4 when the design requires a 24-bit stereo DAC with I2S input, operation up to 96kHz, a 106dB SNR target, and a 5V supply in a 28-SSOP footprint. PCM1798DBR is the primary same-manufacturer comparison candidate, but its sampling rate, SNR, digital interface, and every pin function must be checked before it is treated as a drop-in replacement. PCM1754DBQR belongs to a related DAC family and should be selected only after its package and pin assignment are confirmed. PCM1792DBR, PCM1794DBR, PCM1796DBR, and PCM1690DBR can support sourcing evaluations, but they add distinct rate, noise, or interface characteristics. For a new design, prioritize the confirmed PCM1728EG4 specifications; for an existing PCB, compare the manufacturer pin tables and output-network requirements before approving any substitution.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini PCM1798DBR PCM1792DBR PCM1794DBR PCM1796DBR PCM1690DBR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-SSOP 28-SSOP 28-SSOP 28-SSOP 28-SSOP 28-SSOP

Diferensiator Kunci

  • Defined high-resolution stereo conversion rate (vsPCM1798DBR)
  • Direct I2S interface for digital audio designs (vsPCM1754DBQR)
  • Compact 28-SSOP implementation (vsPCM1690DBR)

Catatan Desain

Place the PCM1728EG4 close to the source of its 5V supply and follow the manufacturer datasheet's recommended decoupling arrangement. Route the I2S clock, data, and word-select signals as controlled digital traces, but keep them away from the left and right analog outputs. A continuous ground reference under the analog section will reduce the chance that switching and clock energy appears as audible or measurable noise.

Treat the I2S clock as the highest-speed digital signal connected to the converter and review its routing for reflection and crosstalk. Keep the clock path away from analog output nodes, avoid unnecessary stubs, and use a continuous reference plane where practical. The PCM1728EG4's 96kHz audio rate does not imply that every associated interface signal is limited to 96kHz, so external circuitry must satisfy the actual clock frequency.

Do not treat a shared package family as proof that every PCM1728, PCM179x, or PCM1690 device is pin-to-pin compatible. Before substituting an alternative, compare the manufacturer pin tables for power, ground, clock, data, word-select, mute, and analog outputs. Also confirm sampling-rate limits, output amplitude, and filter requirements so a mechanically similar replacement does not create a functional mismatch.

Use the 106dB SNR specification as a converter-stage benchmark rather than assuming it guarantees the same noise floor in the finished product. External resistors, output filters, ground contamination, supply ripple, and downstream amplifier noise can dominate system performance. Evaluate the complete analog signal chain and keep the PCM1728EG4 output path short and appropriately terminated.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The PCM1728EG4 is an audio converter IC, so AEC-Q100 qualification is not applicable as an automotive qualification claim. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation or declaration.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

PCM1728EG4 PCM1728EG4 datasheet PCM1728EG4 datasheet pdf PCM1728EG4 pinout PCM1728EG4 price PCM1728EG4 stock PCM1728EG4 replacement PCM1728EG4 equivalent PCM1728EG4 vs PCM1798DBR Texas Instruments PCM1728EG4 PCM1728EG4 24-bit 96kHz I2S DAC PCM1728EG4 28-SSOP footprint PCM1728EG4 audio receiver application

Komponen dan Istilah Terkait

Texas Instruments PCM1728EG4 PCM1798DBR PCM1792DBR PCM1794DBR PCM1796DBR PCM1690DBR PCM1754DBQR digital-to-analog converter DAC audio DAC stereo audio converter ADC/DAC integrated circuit I2S 24-bit resolution 96kHz sampling rate 106dB signal-to-noise ratio 5V power supply 28-SSOP SSOP package family surface mount SMD digital audio receiver active speaker digital mixer RoHS REACH
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ