Microchip Technology

PIC10F220-I/OT - 8-Bit Flash MCU with ADC | Microchip

MPN: PIC10F220-I/OT ✓ نشط
SOT-23-6 Package 8 MHz Speed 384 bytes Flash (256 x 12-bit words) Memory
الحد الأدنى للطلب: 1 |

PIC10F220-I/OT نظرة عامة

The Microchip Technology PIC10F220-I/OT is a low-cost, high-performance 8-bit RISC microcontroller with 384 bytes of Flash program memory, 16 bytes of RAM, four general-purpose I/O pins, and an 8-bit analog-to-digital converter. It operates at up to 8 MHz and is packaged in a 6-pin SOT-23 surface-mount package. Its compact architecture suits cost-sensitive embedded control, sensing, and simple automation designs.

A PIC10F microcontroller belongs to the 8-bit embedded-controller hierarchy: flash-based MCU, embedded controller, and programmable semiconductor. Unlike a general-purpose processor, this device combines a compact instruction set, dedicated I/O, ADC capability, and onboard program memory in a very small footprint. Its RISC architecture uses 33 single-word instructions, with most instructions completing in one cycle while program branches require two cycles.

The PIC10F220-I/OT provides 384 bytes of Flash memory organized as 256 12-bit program words, along with 16 bytes of data RAM. Four general-purpose I/O pins support digital control and input functions, while the integrated 8-bit ADC adds analog measurement without requiring a separate converter. The 8 MHz operating speed provides sufficient throughput for compact control loops, threshold decisions, sequencing, and basic signal conditioning.

Program development uses Microchip's PIC10F architecture and 12-bit-wide instructions. The symmetric instruction format supports efficient code density for the device's limited memory space. Because program branches take two cycles, time-sensitive routines should account for that distinction when calculating timing. The small memory footprint also makes code organization and RAM allocation important in designs involving repeated measurements or state tracking.

Typical uses include simple analog threshold controllers, compact sensor nodes, appliance controls, LED-sequencing systems, and auxiliary control functions within larger equipment. The ADC makes the MCU useful where a few analog inputs must be converted into control decisions, while the four I/O pins can operate external switches, indicators, or digital interfaces. The 6-pin SOT-23 footprint supports dense boards where component area and assembly cost are important constraints.

For PCB implementation, place the decoupling capacitor close to VDD and route the exposed ground connection directly to the board ground plane. Confirm the pin assignment, analog-input limits, and operating-voltage requirements in the manufacturer datasheet before finalizing the schematic. Software should initialize every used direction pin, configure the ADC before conversion, and avoid assuming that unused RAM or I/O locations are available.

This page combines device specifications, verified replacement options, application guidance, pin-level design notes, and direct comparisons to help engineers evaluate the PIC10F220-I/OT for compact embedded-control designs.

بدائل مباشرة لـ PIC10F220-I/OT — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع PIC10F220-I/OT (نفس عامل الشكل والبصمة) — يختلف في Internal Oscillator, ADC, Core Architecture, Timers, Instruction Set.

Microchip Technology
Internal Oscillator: 4 MHz (calibrated)
ADC: 8-bit, 3 channels
Core Architecture: 8-bit RISC (PIC)
Microchip Technology
Internal Oscillator: 8 MHz
Core Architecture: 8-bit PIC RISC (Harvard)
Instruction Set: 33 single-word/single-cycle instructions
Microchip Technology
Internal Oscillator: 4 MHz (calibrated ±1%)
ADC: 8-bit, up to 3 channels
Timers: 1 x 8-bit Timer0 with watchdog
Microchip Technology
Internal Oscillator: 16 MHz HFINTOSC + 8 MHz LFINTOSC
ADC: 8-bit, up to 4 input channels
Core Architecture: 8-bit PIC enhanced mid-range RISC
Microchip Technology
Internal Oscillator: 16 MHz, +/-1% accuracy
ADC: 8-bit, up to 4 channels
Core Architecture: 8-bit PIC enhanced mid-range

PIC10F220T-E/OT

✅ بديل مباشر
Microchip Technology
📦 SOT-23-6
8-bit RISC (PIC) · 33 single-word instructions · 384 bytes (256 x 12 words) · 16 bytes · Not present · 8 MHz (4 MIPS) · 2.0 V to 5.5 V · -40 C to +125 C (Extended Industrial, "E")

تواصل لمعرفة السعر

عرض ورقة البيانات ←

PIC10F220T-I/OT

✅ بديل مباشر
Microchip Technology
📦 SOT-23-6
8-bit PIC RISC (Harvard) · Flash · 384 B (256 x 12 words) · 16 B · 8 MHz (4 MIPS) · 4 (GP0, GP1, GP2, GP4, GP5, plus MCLR/GP3 - 6 total pads, 4 true I/O) · 33 single-word/single-cycle instructions · 2.0 V to 5.5 V

تواصل لمعرفة السعر

عرض ورقة البيانات ←

PIC10F222T-I/OT

✅ بديل مباشر
Microchip Technology
📦 SOT-23-6
8-bit PIC10 RISC · Flash · 768 B (512 x 12 words) · 16 B · 0 B (no on-chip EEPROM) · 8 MHz (4 MIPS at 4 MHz instruction rate) · 4 (GP0, GP1, GP2, GP3 open-drain input-only)

تواصل لمعرفة السعر

عرض ورقة البيانات ←

PIC10F322T-I/OT

✅ بديل مباشر
📦 SOT-23-6
Same package and 8 MHz class; Flash increases from 384 to 448 bytes and RAM from 16 to 32 bytes

📋 بديل مرجعي (غير موجود في الكتالوج)

PIC10LF320-E/OT

✅ بديل مباشر
Microchip Technology
📦 SOT-23-6
8-bit PIC enhanced mid-range · 16 MHz · 448 bytes (256 x 14 words) · 32 bytes · 1.8 V to 3.6 V · 4 · 8-bit, up to 4 channels · 2 (10-bit)

تواصل لمعرفة السعر

عرض ورقة البيانات ←

PIC10F220-I/OT الحدود القصوى والخصائص الكهربائية

Product Type 8-bit Flash-based RISC microcontroller
Architecture RISC
أقصى تردد للساعة 8 MHz
Program Memory 384 bytes Flash (256 x 12-bit words)
Data Memory 16 bytes RAM
General-Purpose I/O 4 pins
ADC Resolution 8 bits
ADC Quantity 1 converter
Instruction Set 33 single-word instructions
Typical Instruction Cycle 1 us
Program Branch Cycle 2 cycles
Instruction Width 12 bits
العلبة SOT-23-6
نوع التركيب Surface mount
Program Memory Type Flash
Processor Category 8-bit

تكوين أطراف PIC10F220-I/OT

SOT-23-6 Package Pinout Diagram SOT-23-6 6-pin surface mount IC, JEDEC MO-178AB. Pin 1 by dot. 1 2 3 4 5 6 SOT-23-6
دبوس 1 VDD — Positive supply voltage
دبوس 2 GP0 — General-purpose I/O pin 0
دبوس 3 GP1 — General-purpose I/O pin 1
دبوس 4 GP2 — General-purpose I/O pin 2
دبوس 5 VSS — Ground reference
دبوس 6 GP5 — General-purpose I/O pin 5

التطبيقات النموذجية

PIC10F220-I/OT مناسب لـ 6 التطبيقs: Compact Analog Sensor Control, Appliance Control Module, LED Sequencing and Indicator Control, Industrial Threshold Controller, Battery-Powered Sensor Node, Embedded Automation Controller.

🧩

Compact Analog Sensor Control

The PIC10F220-I/OT fits compact analog sensing because it combines an 8-bit ADC with four general-purpose I/O pins in a 6-pin SOT-23-6 package. The 384-byte Flash budget can hold acquisition, filtering, threshold logic, and actuator-control routines without adding a separate converter. An engineer can configure the ADC, read a sensor channel, compare the result with a setpoint, and drive a digital output. The principal constraint is memory planning: the 16-byte SRAM requires compact variables and careful state handling, while the 8 MHz clock supports responsive control loops without a larger MCU.

🏭

Appliance Control Module

The PIC10F220-I/OT is appropriate for a small appliance control module that coordinates buttons, indicators, relays, or a simple display. Four I/O pins provide the primary digital interface, while the 8-bit ADC can monitor a dial position, temperature sensor, or supply-derived condition. Its 384 bytes of Flash and 16 bytes of RAM suit compact, deterministic firmware rather than a graphical user interface. The 6-pin SOT-23-6 package reduces board area, and the one-cycle execution model provides useful throughput for debouncing, state transitions, and periodic sensor updates. Firmware should limit RAM-heavy buffering and use timer-based scheduling for longer delays.

💡

LED Sequencing and Indicator Control

PIC10F220-I/OT can implement compact LED sequencing, status indication, and simple visual effects where the control objective is more important than processing capacity. Four general-purpose I/O pins can drive indicator stages, while the ADC may be reserved for an analog control input or left unused. At an 8 MHz maximum clock, the 33-instruction RISC architecture can execute predictable update routines quickly, and most instructions require one cycle. The limited 16-byte RAM favors table-based or small state-machine implementations over large frame buffers. PCB design should account for LED current, grounding, and decoupling while keeping the controller footprint small enough for inline or secondary-board placement.

🏭

Industrial Threshold Controller

The PIC10F220-I/OT is well suited to a compact industrial threshold controller that converts one or more analog measurements into discrete control outputs. The 8-bit ADC supports measurement, while the four I/O pins can drive alarm, relay, or status signals. Its 384-byte Flash footprint encourages concise lookup-based control logic, and the SOT-23-6 package supports dense control boards. The industrial-grade suffix is appropriate when the required ambient range matches that grade, but the exact operating limits must be checked against the design envelope. For production reliability, validate sensor scaling, ADC settling, output isolation, reset behavior, and power-supply tolerances over the full temperature range.

🔋

Battery-Powered Sensor Node

PIC10F220-I/OT can form the core of a small battery-powered sensor node when its operating current and sleep behavior support the power budget. The device combines an 8-bit ADC, 16 bytes of RAM, and four I/O pins while occupying only a 6-pin SOT-23-6 footprint. Firmware can wake periodically, acquire a sensor reading, apply a threshold, and return to a low-power state. Because program and data memory are limited, measurements should be processed immediately and only essential state retained. Before deployment, verify active and sleep currents, ADC conversion time, oscillator behavior, and the leakage contribution of external sensors, because those external loads can dominate total energy consumption.

🤖

Embedded Automation Controller

The PIC10F220-I/OT works as an embedded automation controller for a small subsystem that combines discrete inputs, an analog measurement, and a limited number of outputs. Its four I/O pins can implement sensing interfaces and control functions, while the ADC expands the available input types without requiring an external converter. The 8 MHz clock and one-cycle common instruction path support predictable polling, debouncing, and threshold logic. The device is most appropriate when the automation task has a fixed, compact state machine rather than heavy communications or user-interface demands. Use the pin-description table to assign multiplexed functions, and reserve sufficient Flash for future timing or fault-handling changes.

What is the PIC10F220-I/OT?
The PIC10F220-I/OT is a low-cost, 8-bit, flash-based RISC microcontroller with 384 bytes of program memory, 16 bytes of RAM, four general-purpose I/O pins, and an 8-bit ADC. According to the Microchip PIC10F220/222 data sheet, its 33-instruction architecture executes most instructions in one cycle, with program branches requiring two cycles.
What are the key specifications of PIC10F220-I/OT that engineers should know?
The PIC10F220-I/OT combines an 8 MHz clock, 384 bytes of Flash program memory, 16 bytes of RAM, four general-purpose I/O pins, and an 8-bit ADC in SOT-23-6. The Microchip PIC10F220/222 data sheet identifies a 12-bit instruction width, 33 single-word instructions, one-cycle typical execution, and two-cycle program branches as its principal architectural characteristics.
Where can I download the PIC10F220-I/OT datasheet PDF?
The official PIC10F220-I/OT datasheet is the Microchip PIC10F220/222 data sheet at the 40001270F.pdf link on Microchip's domain. It covers the PIC10F220 and PIC10F222 devices, including electrical characteristics, timing, Flash program memory, RAM, ADC operation, package information, and pin assignments for the SOT-23-6 configuration.
Where can I find the PIC10F220-I/OT pinout?
The PIC10F220-I/OT pinout is found in the pin-description table of the Microchip PIC10F220/222 data sheet. The device uses a 6-pin SOT-23 package, and the diagram must be read together with the package drawing because physical pin numbering and the order of electrical functions are both essential when assigning tracks on the PCB.
How much memory does the PIC10F220-I/OT have?
The PIC10F220-I/OT contains 384 bytes of Flash program memory, equivalent to 256 12-bit program words, and 16 bytes of SRAM. The Microchip PIC10F220/222 data sheet describes a 12-bit-wide instruction set. Programs must therefore be sized for both the limited code space and the much smaller RAM allocation.
Does the PIC10F220-I/OT have an ADC?
Yes, the PIC10F220-I/OT includes an 8-bit analog-to-digital converter. The Microchip PIC10F220/222 data sheet identifies the device as an 8-bit microcontroller with 8-bit A/D, allowing analog inputs to be measured directly by the CPU without requiring a separate ADC package.
PIC10F220-I/OT vs PIC10F222T-I/OT - which is better?
Choose the PIC10F220-I/OT when 384 bytes of Flash and 16 bytes of RAM are sufficient; choose the PIC10F222T-I/OT when its larger memory resources are needed. Both occupy SOT-23-6 packages, but the PIC10F222 belongs to a higher-memory family position, so software sizing and pin-function differences must be checked before interchange.
PIC10F220-I/OT vs PIC10F322T-I/OT - which should I select?
Choose the PIC10F220-I/OT for the smallest program-memory and RAM requirements, while the PIC10F322T-I/OT is appropriate when additional Flash and RAM simplify code organization. The published comparison identifies both as 8 MHz SOT-23-6 devices, but it also shows 448 bytes of Flash and 32 bytes of RAM for the PIC10F322, versus 384 bytes and 16 bytes for the PIC10F220.
When should I choose PIC10F220-I/OT over PIC10F322T-I/OT?
Choose PIC10F220-I/OT when the application fits within 384 bytes of Flash and 16 bytes of RAM and the smaller internal resources are acceptable. Choose PIC10F322T-I/OT when code growth, state variables, or firmware maintenance justify 448 bytes of Flash and 32 bytes of RAM. Confirm all ADC, reset, and I/O details against the selected device's datasheet.
What is the best drop-in replacement for PIC10F220-I/OT?
PIC10F220T-E/OT is a close same-footprint replacement when its temperature grade satisfies the design. It retains the SOT-23-6 package and PIC10F220 function, while the E suffix changes the operating-temperature grade. For additional memory, PIC10F322T-I/OT offers 448 bytes of Flash and 32 bytes of RAM, but firmware and peripheral assignments require review.
Can PIC10F322T-I/OT replace PIC10F220-I/OT?
PIC10F322T-I/OT can serve as a same-package migration option, but it should not be treated as an unconditional software-identical substitute. The published comparison shows 448 bytes of Flash and 32 bytes of RAM for the PIC10F322 versus 384 bytes and 16 bytes for the PIC10F220. Review reset behavior, I/O assignments, ADC channels, and all device-specific registers.
What can replace PIC10F220-I/OT?
The closest replacements are Microchip PIC10F220T-E/OT and PIC10F220T-I/OT because they retain the PIC10F220 identity and SOT-23-6 footprint. PIC10F322T-I/OT offers more memory but requires a firmware and peripheral review. No verified cross-manufacturer drop-in equivalent is established, so an unofficial substitute should not be released without complete timing and pin-level qualification.
Is PIC10F220-I/OT the same as PIC10F220-E/OT?
No, the PIC10F220-I/OT and PIC10F220-E/OT differ in operating-temperature grade, although both retain the PIC10F220 function and SOT-23-6 package. The I grade is intended for industrial-temperature use, while the E grade has a different temperature range. Select the suffix according to the required ambient and junction-temperature limits.
Is the PIC10F220-I/OT in stock and what is its lead time?
Current stock and production lead time for the PIC10F220-I/OT should be requested through the Request a Quote form on this page. The form allows the exact MPN, required quantity, and delivery expectations to be confirmed. This direct quote workflow avoids treating an old catalog record as a guarantee of present inventory.
Where can I buy PIC10F220-I/OT and what is the price?
Use the Request a Quote form on this page to request the current price, stock, and lead time for the exact PIC10F220-I/OT ordering code. Quotation should specify the SOT-23-6 package and industrial temperature suffix so the manufacturer or supply channel can confirm the precise configuration rather than a related PIC10F220 variant.
Is the PIC10F220-I/OT suitable for battery-powered sensor designs?
The PIC10F220-I/OT can suit compact sensor designs when its operating current and analog performance meet the battery budget. The device combines four I/O pins with an 8-bit ADC in a 6-pin SOT-23-6 package. Confirm operating current, ADC timing, and sleep-mode behavior in the manufacturer datasheet before estimating battery life.

بيانات مرجعية هندسية لـ PIC10F220-I/OT — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose PIC10F220-I/OT when a compact, cost-sensitive control design fits within 384 bytes of Flash, 16 bytes of RAM, four I/O pins, and one 8-bit ADC. Its 6-pin SOT-23-6 package is especially useful for dense sensor, indicator, and appliance-control boards. PIC10F220T-I/OT or PIC10F220T-E/OT are close ordering options when temperature-grade requirements and manufacturer ordering conventions make one preferable.

Select PIC10F322T-I/OT when 448 bytes of Flash and 32 bytes of RAM simplify firmware and state management; the physical package remains SOT-23-6, but firmware and register behavior require review. PIC10F222T-I/OT is appropriate when its larger memory resources are needed and its device-specific functions are acceptable. PIC10LF320-E/OT suits a 1.8 V to 3.6 V rail, unlike the higher-voltage target class. For any migration, verify pin multiplexing, ADC behavior, reset timing, memory limits, temperature grade, and application-specific qualification before release.

المقارنة مع البدائل

المعامل هذا المنتج PIC10F220T-E/OT PIC10F220T-I/OT PIC10F222T-I/OT PIC10F322T-I/OT PIC10LF320-E/OT
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package SOT-23-6 SOT-23-6 SOT-23-6 SOT-23-6 SOT-23-6 SOT-23-6
Maximum Clock Frequency 8 MHz 8 MHz 8 MHz 8 MHz 8 MHz 8 MHz
General-Purpose I/O 4 pins 4 pins 4 pins 4 pins 4 pins 4 pins
ADC Resolution 8 bits 8 bits 8 bits 8 bits 8 bits 8 bits
Temperature Grade Industrial Extended Industrial Industrial Industrial Extended

أبرز الفروقات

  • Minimal 6-pin implementation footprint (مقابلPIC10F322T-I/OT)
  • Four integrated general-purpose I/O pins (مقابلPIC10LF320-E/OT)
  • One-cycle common instruction execution (مقابلPIC10F222T-I/OT)

ملاحظات التصميم

Place the VDD bypass capacitor immediately between the VDD and VSS pins, using the capacitor value and ESR range specified in the manufacturer data sheet. Route VSS directly to the ground plane and avoid placing analog traces between the MCU ground and sensitive sensor returns. The six-pin SOT-23-6 footprint leaves little routing room, so verify courtyard clearance and paste-land geometry before fabrication.

Treat GP0, GP1, GP2, and GP5 as limited resources because only four general-purpose I/O pins are present and some functions may be multiplexed with analog or programming functions. Confirm each pin's mode, pull-up, and output-drive configuration in the pin-description table. Initialize unused inputs to a defined state and prevent external circuitry from overriding pins that software drives as outputs.

Do not design around unused Flash or RAM as though it were freely expandable. The target has 384 bytes of Flash, equivalent to 256 12-bit program words, and 16 bytes of RAM, so tables, call depth, ADC buffers, and state variables compete for a small memory budget. A migration to a 448-byte-Flash and 32-byte-RAM PIC10F322 may ease congestion, but its register map and peripheral behavior must be reviewed before code changes are accepted.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The device is an industrial-grade microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appears in the cited records.

تم التحقق من البيانات في: 2026-11-19 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

pic10f220 datasheet PIC10F220-I/OT datasheet pdf PIC10F220-I/OT pinout PIC10F220-I/OT specifications PIC10F220-I/OT SOT-23-6 PIC10F220-I/OT equivalent PIC10F220-I/OT replacement PIC10F220-I/OT vs PIC10F322T-I/OT PIC10F220-I/OT vs PIC10F222T-I/OT PIC10F220-I/OT price PIC10F220-I/OT stock Microchip PIC10F220-I/OT PIC10F220 ADC application PIC10F220 drop-in replacement

المكونات والمصطلحات ذات الصلة

Microchip Technology PIC10F220-I/OT PIC10F220T-E/OT PIC10F220T-I/OT PIC10F222T-I/OT PIC10F322T-I/OT PIC10LF320-E/OT 8-bit microcontroller flash-based MCU RISC architecture embedded controller programmable semiconductor 384-byte Flash memory 16-byte SRAM 8-bit ADC general-purpose I/O SOT-23-6 SOT-23 package family surface-mount package 12-bit instruction word sensor node appliance control industrial threshold controller battery-powered sensor embedded automation
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر