PIC10F220-I/OT - 8-Bit Flash MCU with ADC | Microchip
MPN: PIC10F220-I/OT ✓ פעילPIC10F220-I/OT סקירה
A PIC10F microcontroller belongs to the 8-bit embedded-controller hierarchy: flash-based MCU, embedded controller, and programmable semiconductor. Unlike a general-purpose processor, this device combines a compact instruction set, dedicated I/O, ADC capability, and onboard program memory in a very small footprint. Its RISC architecture uses 33 single-word instructions, with most instructions completing in one cycle while program branches require two cycles.
The PIC10F220-I/OT provides 384 bytes of Flash memory organized as 256 12-bit program words, along with 16 bytes of data RAM. Four general-purpose I/O pins support digital control and input functions, while the integrated 8-bit ADC adds analog measurement without requiring a separate converter. The 8 MHz operating speed provides sufficient throughput for compact control loops, threshold decisions, sequencing, and basic signal conditioning.
Program development uses Microchip's PIC10F architecture and 12-bit-wide instructions. The symmetric instruction format supports efficient code density for the device's limited memory space. Because program branches take two cycles, time-sensitive routines should account for that distinction when calculating timing. The small memory footprint also makes code organization and RAM allocation important in designs involving repeated measurements or state tracking.
Typical uses include simple analog threshold controllers, compact sensor nodes, appliance controls, LED-sequencing systems, and auxiliary control functions within larger equipment. The ADC makes the MCU useful where a few analog inputs must be converted into control decisions, while the four I/O pins can operate external switches, indicators, or digital interfaces. The 6-pin SOT-23 footprint supports dense boards where component area and assembly cost are important constraints.
For PCB implementation, place the decoupling capacitor close to VDD and route the exposed ground connection directly to the board ground plane. Confirm the pin assignment, analog-input limits, and operating-voltage requirements in the manufacturer datasheet before finalizing the schematic. Software should initialize every used direction pin, configure the ADC before conversion, and avoid assuming that unused RAM or I/O locations are available.
This page combines device specifications, verified replacement options, application guidance, pin-level design notes, and direct comparisons to help engineers evaluate the PIC10F220-I/OT for compact embedded-control designs.
חלופות תחליף ישיר עבור PIC10F220-I/OT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC10F220-I/OT (אותו גורם צורה וטביעת רגל) — שונים ב Internal Oscillator, ADC, Core Architecture, Timers, Instruction Set.
PIC10F220T-E/OT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC10F220T-I/OT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC10F222T-I/OT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC10F322T-I/OT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC10LF320-E/OT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC10F220-I/OT דירוגים מרביים ומאפיינים חשמליים
| Product Type | 8-bit Flash-based RISC microcontroller |
| Architecture | RISC |
| תדר שעון מקסימלי | 8 MHz |
| Program Memory | 384 bytes Flash (256 x 12-bit words) |
| Data Memory | 16 bytes RAM |
| General-Purpose I/O | 4 pins |
| ADC Resolution | 8 bits |
| ADC Quantity | 1 converter |
| Instruction Set | 33 single-word instructions |
| Typical Instruction Cycle | 1 us |
| Program Branch Cycle | 2 cycles |
| Instruction Width | 12 bits |
| מארז | SOT-23-6 |
| סוג הרכבה | Surface mount |
| Program Memory Type | Flash |
| Processor Category | 8-bit |
תצורת פינים של PIC10F220-I/OT
| פין 1 | VDD — Positive supply voltage |
| פין 2 | GP0 — General-purpose I/O pin 0 |
| פין 3 | GP1 — General-purpose I/O pin 1 |
| פין 4 | GP2 — General-purpose I/O pin 2 |
| פין 5 | VSS — Ground reference |
| פין 6 | GP5 — General-purpose I/O pin 5 |
יישומים טיפוסיים
PIC10F220-I/OT מתאים עבור 6 יישוםs: Compact Analog Sensor Control, Appliance Control Module, LED Sequencing and Indicator Control, Industrial Threshold Controller, Battery-Powered Sensor Node, Embedded Automation Controller.
Compact Analog Sensor Control
The PIC10F220-I/OT fits compact analog sensing because it combines an 8-bit ADC with four general-purpose I/O pins in a 6-pin SOT-23-6 package. The 384-byte Flash budget can hold acquisition, filtering, threshold logic, and actuator-control routines without adding a separate converter. An engineer can configure the ADC, read a sensor channel, compare the result with a setpoint, and drive a digital output. The principal constraint is memory planning: the 16-byte SRAM requires compact variables and careful state handling, while the 8 MHz clock supports responsive control loops without a larger MCU.
מומלץ
Appliance Control Module
The PIC10F220-I/OT is appropriate for a small appliance control module that coordinates buttons, indicators, relays, or a simple display. Four I/O pins provide the primary digital interface, while the 8-bit ADC can monitor a dial position, temperature sensor, or supply-derived condition. Its 384 bytes of Flash and 16 bytes of RAM suit compact, deterministic firmware rather than a graphical user interface. The 6-pin SOT-23-6 package reduces board area, and the one-cycle execution model provides useful throughput for debouncing, state transitions, and periodic sensor updates. Firmware should limit RAM-heavy buffering and use timer-based scheduling for longer delays.
מומלץ
LED Sequencing and Indicator Control
PIC10F220-I/OT can implement compact LED sequencing, status indication, and simple visual effects where the control objective is more important than processing capacity. Four general-purpose I/O pins can drive indicator stages, while the ADC may be reserved for an analog control input or left unused. At an 8 MHz maximum clock, the 33-instruction RISC architecture can execute predictable update routines quickly, and most instructions require one cycle. The limited 16-byte RAM favors table-based or small state-machine implementations over large frame buffers. PCB design should account for LED current, grounding, and decoupling while keeping the controller footprint small enough for inline or secondary-board placement.
מומלץ
Industrial Threshold Controller
The PIC10F220-I/OT is well suited to a compact industrial threshold controller that converts one or more analog measurements into discrete control outputs. The 8-bit ADC supports measurement, while the four I/O pins can drive alarm, relay, or status signals. Its 384-byte Flash footprint encourages concise lookup-based control logic, and the SOT-23-6 package supports dense control boards. The industrial-grade suffix is appropriate when the required ambient range matches that grade, but the exact operating limits must be checked against the design envelope. For production reliability, validate sensor scaling, ADC settling, output isolation, reset behavior, and power-supply tolerances over the full temperature range.
מומלץ
Battery-Powered Sensor Node
PIC10F220-I/OT can form the core of a small battery-powered sensor node when its operating current and sleep behavior support the power budget. The device combines an 8-bit ADC, 16 bytes of RAM, and four I/O pins while occupying only a 6-pin SOT-23-6 footprint. Firmware can wake periodically, acquire a sensor reading, apply a threshold, and return to a low-power state. Because program and data memory are limited, measurements should be processed immediately and only essential state retained. Before deployment, verify active and sleep currents, ADC conversion time, oscillator behavior, and the leakage contribution of external sensors, because those external loads can dominate total energy consumption.
מומלץ
Embedded Automation Controller
The PIC10F220-I/OT works as an embedded automation controller for a small subsystem that combines discrete inputs, an analog measurement, and a limited number of outputs. Its four I/O pins can implement sensing interfaces and control functions, while the ADC expands the available input types without requiring an external converter. The 8 MHz clock and one-cycle common instruction path support predictable polling, debouncing, and threshold logic. The device is most appropriate when the automation task has a fixed, compact state machine rather than heavy communications or user-interface demands. Use the pin-description table to assign multiplexed functions, and reserve sufficient Flash for future timing or fault-handling changes.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC10F220-I/OT — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
Select PIC10F322T-I/OT when 448 bytes of Flash and 32 bytes of RAM simplify firmware and state management; the physical package remains SOT-23-6, but firmware and register behavior require review. PIC10F222T-I/OT is appropriate when its larger memory resources are needed and its device-specific functions are acceptable. PIC10LF320-E/OT suits a 1.8 V to 3.6 V rail, unlike the higher-voltage target class. For any migration, verify pin multiplexing, ADC behavior, reset timing, memory limits, temperature grade, and application-specific qualification before release.
השוואה עם חלופות
| פרמטר | מוצר זה | PIC10F220T-E/OT | PIC10F220T-I/OT | PIC10F222T-I/OT | PIC10F322T-I/OT | PIC10LF320-E/OT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | SOT-23-6 | SOT-23-6 | SOT-23-6 | SOT-23-6 | SOT-23-6 | SOT-23-6 |
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| General-Purpose I/O | 4 pins | 4 pins | 4 pins | 4 pins | 4 pins | 4 pins |
| ADC Resolution | 8 bits | 8 bits | 8 bits | 8 bits | 8 bits | 8 bits |
| Temperature Grade | Industrial | Extended | Industrial | Industrial | Industrial | Extended |
מבדילים עיקריים
- Minimal 6-pin implementation footprint (לעומתPIC10F322T-I/OT)
- Four integrated general-purpose I/O pins (לעומתPIC10LF320-E/OT)
- One-cycle common instruction execution (לעומתPIC10F222T-I/OT)
הערות תכנון
Place the VDD bypass capacitor immediately between the VDD and VSS pins, using the capacitor value and ESR range specified in the manufacturer data sheet. Route VSS directly to the ground plane and avoid placing analog traces between the MCU ground and sensitive sensor returns. The six-pin SOT-23-6 footprint leaves little routing room, so verify courtyard clearance and paste-land geometry before fabrication.
Treat GP0, GP1, GP2, and GP5 as limited resources because only four general-purpose I/O pins are present and some functions may be multiplexed with analog or programming functions. Confirm each pin's mode, pull-up, and output-drive configuration in the pin-description table. Initialize unused inputs to a defined state and prevent external circuitry from overriding pins that software drives as outputs.
Do not design around unused Flash or RAM as though it were freely expandable. The target has 384 bytes of Flash, equivalent to 256 12-bit program words, and 16 bytes of RAM, so tables, call depth, ADC buffers, and state variables compete for a small memory budget. A migration to a 448-byte-Flash and 32-byte-RAM PIC10F322 may ease congestion, but its register map and peripheral behavior must be reviewed before code changes are accepted.
מידע על תאימות
The device is an industrial-grade microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appears in the cited records.