PIC16F1503-E/P - 8-Bit 20MHz MCU with ADC | Microchip
MPN: PIC16F1503-E/P ✓ نشطPIC16F1503-E/P نظرة عامة
An 8-bit microcontroller is a programmable semiconductor containing a CPU, memory, timers, communication peripherals, and analog inputs on one integrated circuit. The PIC16F1503 belongs to the enhanced mid-range PIC16 family, whose RISC-based architecture supports compact firmware for control, sensing, and communication tasks. The PIC16F1503 specifically combines 2K words of programmable Flash, data memory, configurable logic, digital peripherals, and analog conversion resources.
Three principal capabilities define this device: a 20 MHz operating core, 3.5 KB of Flash memory, and a 10-bit ADC. Twelve I/O pins provide interfacing for sensors, switches, indicators, and control signals. The microcontroller also supports CLC, CWG, and NCO peripherals, while self-programming, power-on reset, a power-up timer, programmable low-power brown-out reset, and an extended watchdog timer support robust embedded operation.
The PIC16F1503-E/P uses Flash memory for program storage and supports in-circuit serial programming through two programming pins. Its configurable logic cell can implement hardware-assisted timing and signal functions, while the comparator and analog blocks support threshold decisions without continuous CPU intervention. These resources allow a design to combine measurement, control, and communication functions in a small 14-pin through-hole device.
Typical uses include USB power-delivery controllers, industrial control panels, compact sensor nodes, LED sequencing systems, appliance controls, and hobbyist automation projects. The PIC16F1503 appears in the published UCS1002 and PIC16F1503 reference design for a universal serial bus charger, demonstrating its use in a real power-management application where firmware, timing, and analog supervision work together.
Designers should preserve the operating-voltage limits and provide the decoupling and programming connections required by the manufacturer datasheet. For new layouts, pay particular attention to MCLR handling, oscillator configuration, analog-input conditioning, and exposed test points for ICSP programming. Because this is a through-hole DIP device, lead spacing and connector orientation should also be checked before assembly.
This page combines manufacturer specifications, verified product references, same-package replacement analysis, application guidance, and practical design considerations in a compact engineering reference. It highlights where the PIC16F1503-E/P fits, how its temperature-grade and low-voltage family options differ, and which design constraints should be checked before firmware and hardware are finalized.
بدائل مباشرة لـ PIC16F1503-E/P — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع PIC16F1503-E/P (نفس عامل الشكل والبصمة) — يختلف في Package, Mounting Type, I/O Pins, Operating Temperature, ADC.
PIC16F1503-I/P
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PIC16F1503-E/MG
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC16F1503-E/P الحدود القصوى والخصائص الكهربائية
| Device Type | 8-bit Flash microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 3.5 KB Flash (2K x 14 words) |
| Data Memory | 128 bytes RAM |
| General-Purpose I/O | 12 pins |
| ADC Resolution | 10 bits |
| Operating Voltage Range | 2.3 V to 5.5 V |
| CPU Architecture | PIC RISC |
| Programmable Logic | Configurable Logic Cell (CLC) |
| Waveform Generation | Complementary Waveform Generator (CWG) |
| Frequency Generation | Numerically Controlled Oscillator (NCO) |
| Program Memory Type | Self-programmable Flash under software control |
| Power-On Reset | Supported (POR) |
| Power-Up Timer | Supported (PWRT) |
| Brown-Out Reset | Programmable low-power BOR (LPBOR) |
| Watchdog Timer | Programmable extended WDT, 1 ms to 256 s |
| Programming Interface | In-Circuit Serial Programming (ICSP) using two pins |
| Code Protection | Programmable |
| العلبة | 14-pin DIP |
| نوع التركيب | Through-hole |
تكوين أطراف PIC16F1503-E/P
| دبوس 1 | VDD — Positive supply voltage |
| دبوس 2 | RA5/VCAP — RA5 digital input or capacitor connection |
| دبوس 3 | RA4/T1OSC/C1OUT — RA4 digital input, Timer1 oscillator input, or comparator output |
| دبوس 4 | RA3/MCLR/VPP — RA3 digital input, master clear input, or programming voltage |
| دبوس 5 | RC2/CCP1/INT/OSC1/OSC1E — RC2 digital input or output, capture/compare, interrupt, or oscillator function |
| دبوس 6 | RC1/CCP2/OSC2/OSC2E — RC1 digital input or output, capture/compare, or oscillator function |
| دبوس 7 | RC0/CLKO/RC5 — RC0 digital input or output, clock output, or remapped RC5 function |
| دبوس 8 | RC5/CCP4 — RC5 digital input or output or capture/compare function |
| دبوس 9 | RC4/CCP3 — RC4 digital input or output or capture/compare function |
| دبوس 10 | RC3/SCK/SCL — RC3 digital input or output, SPI clock, or I2C clock |
| دبوس 11 | RA2/AN2/C2IN-/INT — RA2 digital input or output, analog input, comparator input, or interrupt |
| دبوس 12 | RA1/AN1/C1IN- — RA1 digital input or output, analog input, or comparator input |
| دبوس 13 | RA0/AN0/C1IN+ — RA0 digital input or output, analog input, or comparator input |
| دبوس 14 | VSS — Ground reference |
التطبيقات النموذجية
PIC16F1503-E/P مناسب لـ 6 التطبيقs: USB Port-Power Controller, Industrial Sensor Node, LED Sequencing and Lighting Control, Appliance Control Panel, Compact Data Acquisition Controller, Programmable Power-Control Module.
USB Port-Power Controller
The PIC16F1503-E/P fits a compact USB charger controller because it combines a 20 MHz core with programmable timers, 128 bytes of RAM, and 3.5 KB of Flash for coordinating input detection, port control, and fault handling. The published UCS1002 and PIC16F1503 reference design demonstrates this role with the UCS1002 providing programmable port-power control. Its 10-bit ADC can also supervise a voltage or current signal when the analog divider is designed for the 2.3 V to 5.5 V operating range. The principal trade-off is the limited RAM, so firmware should reuse buffers and avoid unnecessary diagnostic copies.
موصى به
Industrial Sensor Node
The PIC16F1503-E/P is appropriate for a compact industrial sensor node that measures an analog input and controls a small number of discrete outputs. Its 10-bit ADC handles common sensor signals, while 12 I/O pins leave interface capacity for switches, alarms, status indicators, or a communication link. The 3.5 KB Flash footprint is appropriate for compact control firmware, and the 128-byte RAM requires disciplined buffer management. For equipment exposed to temperature variation, the exact -E operating limits and industrial control requirements should be checked before the ordering code is approved.
موصى به
LED Sequencing and Lighting Control
The PIC16F1503-E/P can implement LED sequencing, status indication, and simple dimming logic without an external programmable logic device. The CWG peripheral provides hardware-assisted complementary waveform generation, and the 20 MHz core leaves instruction bandwidth for sequencing, fault detection, and user-interface updates. Twelve I/O pins provide enough parallel control for compact indicators or driver inputs, while the Flash memory stores patterns and configuration data. Designers should use timer-based timing and consider duty-cycle limits when driving high-current LEDs directly through MCU pins.
موصى به
Appliance Control Panel
The PIC16F1503-E/P suits a compact appliance panel where a microcontroller must read buttons, evaluate analog levels, and operate relays or indicator lamps. Its 10-bit ADC supports input monitoring, the 12 available I/O pins support panel signals, and the 3.5 KB Flash can hold a complete control routine. The 2.3 V to 5.5 V operating range supports common low-voltage control architectures. A production design should reserve MCLR behavior for reliable startup, provide proper input conditioning, and account for relay-coil transients rather than routing them directly through controller pins.
موصى به
Compact Data Acquisition Controller
The PIC16F1503-E/P can act as a compact data-acquisition controller when the required sample rate is modest and the application prioritizes low component count. The 10-bit ADC supplies the measurement function, while the 20 MHz CPU performs scaling, filtering, threshold evaluation, and data preparation. Its 128 bytes of RAM limits simultaneous sample buffering, so streaming or averaging strategies are generally preferable to long raw-data capture. The controller remains suitable for supervisory measurements where an upstream system handles high-speed transfer or extensive storage.
موصى به
Programmable Power-Control Module
The PIC16F1503-E/P is useful in programmable power-control modules because it can supervise analog conditions, coordinate sequencing through timers, and communicate status over discrete or serial interfaces. Its CLC peripheral can execute hardware-assisted threshold and signal decisions, reducing the polling burden on the CPU. The MCU is particularly appropriate for low-power auxiliary controllers rather than high-efficiency conversion stages. Firmware should include current-limit, timeout, and fault-latch behavior, and the PCB should preserve separation between sensitive measurement paths and switching-node energy.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ PIC16F1503-E/P — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | PIC16F1503-I/P | PIC16F1503 |
|---|---|---|---|
| Package | 14-pin DIP | 14-pin DIP | 14-pin DIP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 3.5 KB (2K x 14 words) | 3.5 KB (2K x 14 words) | 3.5 KB (2K x 14 words) |
| RAM | 128 bytes | 128 bytes | 128 bytes |
| I/O Pins | 12 | 12 | 12 |
| ADC | 10-bit ADC | 10-bit ADC | 10-bit ADC |
| Operating Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| Temperature Grade | -E grade | -I grade | Unspecified base-family ordering |
أبرز الفروقات
- Same-package alternative with industrial-grade ordering (مقابلPIC16F1503-I/P)
- Complete mixed-signal control in one through-hole device (مقابلPIC16F1503)
- Compact 128-byte RAM architecture suited to embedded firmware (مقابلPIC16F1503-I/P)
ملاحظات التصميم
Keep the PIC16F1503-E/P within its documented 2.3 V to 5.5 V operating range and follow the manufacturer decoupling recommendations for VDD and VSS. Place the primary bypass capacitor close to the supply pins to suppress switching-induced voltage excursions. For designs using the internal oscillator or any enabled digital peripheral, verify startup behavior and current demand across the complete supply range. Do not infer a battery life figure from the CPU frequency because peripheral activity, ADC use, and sleep-mode configuration materially change the result.
Preserve access to MCLR/VPP and the two ICSP programming pins when laying out the 14-pin DIP footprint. MCLR can be sensitive to noise and leakage, so route it away from switching nodes and use the connection method shown in the manufacturer circuit guidance. Keep analog inputs short, isolate them from high-current returns, and ground the analog reference according to the datasheet. A small test-point pattern makes programming and board-level troubleshooting possible without changing the component layout.
Do not treat every PIC16F1503 suffix as interchangeable. The -E/P ordering code combines the selected temperature-grade option with the 14-pin DIP package, while -I/P changes the grade and other suffixes change the package or transport format. Before replacing the device, verify the complete ordering code, pin names, programming method, operating-voltage limits, and required qualification. Also account for the device's 128-byte RAM by avoiding large local arrays and unnecessary interrupt-time copies.
معلومات الامتثال
The exact declaration status for PIC16F1503-E/P should be confirmed against Microchip Technology's current material-compliance and product-conformity records. AEC-Q100 is not applicable to this general-purpose microcontroller ordering code.