Microchip Technology

PIC16F1503-E/P - 8-Bit 20MHz MCU with ADC | Microchip

Référence : PIC16F1503-E/P ✓ Actif
2.3 V to 5.5 V Vdss 14-pin DIP Package 20 MHz Speed 3.5 KB Flash (2K x 14 words) Memory
MOQ : 1 |

PIC16F1503-E/P Présentation

The Microchip Technology PIC16F1503-E/P is an 8-bit PIC microcontroller with a 20 MHz core, 3.5 KB of Flash program memory, 128 bytes of SRAM, 12 I/O pins, and a 10-bit ADC in a 14-pin DIP package. It combines the PIC16 core and peripheral set with a 2.3 V to 5.5 V operating range, making it suitable for compact embedded control systems that require mixed analog and digital measurement.

An 8-bit microcontroller is a programmable semiconductor containing a CPU, memory, timers, communication peripherals, and analog inputs on one integrated circuit. The PIC16F1503 belongs to the enhanced mid-range PIC16 family, whose RISC-based architecture supports compact firmware for control, sensing, and communication tasks. The PIC16F1503 specifically combines 2K words of programmable Flash, data memory, configurable logic, digital peripherals, and analog conversion resources.

Three principal capabilities define this device: a 20 MHz operating core, 3.5 KB of Flash memory, and a 10-bit ADC. Twelve I/O pins provide interfacing for sensors, switches, indicators, and control signals. The microcontroller also supports CLC, CWG, and NCO peripherals, while self-programming, power-on reset, a power-up timer, programmable low-power brown-out reset, and an extended watchdog timer support robust embedded operation.

The PIC16F1503-E/P uses Flash memory for program storage and supports in-circuit serial programming through two programming pins. Its configurable logic cell can implement hardware-assisted timing and signal functions, while the comparator and analog blocks support threshold decisions without continuous CPU intervention. These resources allow a design to combine measurement, control, and communication functions in a small 14-pin through-hole device.

Typical uses include USB power-delivery controllers, industrial control panels, compact sensor nodes, LED sequencing systems, appliance controls, and hobbyist automation projects. The PIC16F1503 appears in the published UCS1002 and PIC16F1503 reference design for a universal serial bus charger, demonstrating its use in a real power-management application where firmware, timing, and analog supervision work together.

Designers should preserve the operating-voltage limits and provide the decoupling and programming connections required by the manufacturer datasheet. For new layouts, pay particular attention to MCLR handling, oscillator configuration, analog-input conditioning, and exposed test points for ICSP programming. Because this is a through-hole DIP device, lead spacing and connector orientation should also be checked before assembly.

This page combines manufacturer specifications, verified product references, same-package replacement analysis, application guidance, and practical design considerations in a compact engineering reference. It highlights where the PIC16F1503-E/P fits, how its temperature-grade and low-voltage family options differ, and which design constraints should be checked before firmware and hardware are finalized.

Alternatives de remplacement direct pour PIC16F1503-E/P — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec PIC16F1503-E/P (même facteur de forme et même empreinte) — différant par Package, Mounting Type, I/O Pins, Operating Temperature, ADC.

Microchip Technology
Package: 16-QFN (3x3 mm) with exposed pad
Mounting Type: Surface Mount
I/O Pins: 11
Microchip Technology
Package: 14-pin TSSOP (ST)
Mounting Type: Surface Mount
I/O Pins: 12
Microchip Technology
Package: 20-pin PDIP (P)
Mounting Type: Through-Hole (DIP)
ADC: 10-bit, up to 12 channels
Microchip Technology
Package: 20-Pin PDIP (P)
Mounting Type: Through-Hole (THT)
I/O Pins: 12 (plus 1 input-only)
Microchip Technology
Package: 20-pin PDIP (DIP-20, 0.300 inch / 7.62 mm)
I/O Pins: 18
Operating Temperature: -40C to +125C (extended, "-E" grade)

PIC16F1503-I/P

✅ Remplacement direct
📦 14-pin DIP
Industrial-grade suffix replaces the extended-temperature -E ordering; core, Flash, RAM, I/O, ADC, and package remain the same

📋 Alternative de référence (hors catalogue)

PIC16F1503-E/MG

✅ Remplacement direct
Microchip Technology
📦 14-pin DIP
Enhanced Mid-Range 8-bit PIC · 49 instructions, 16-level stack · 3.5 KB (2K x 14) · 128 bytes · 20 MHz · 2.3 V to 5.5 V · 11

Contactez-nous pour le prix

Voir la fiche technique →

PIC16F1503-E/P Valeurs maximales et caractéristiques électriques

Device Type 8-bit Flash microcontroller
Maximum CPU Frequency 20 MHz
Program Memory 3.5 KB Flash (2K x 14 words)
Data Memory 128 bytes RAM
General-Purpose I/O 12 pins
ADC Resolution 10 bits
Operating Voltage Range 2.3 V to 5.5 V
CPU Architecture PIC RISC
Programmable Logic Configurable Logic Cell (CLC)
Waveform Generation Complementary Waveform Generator (CWG)
Frequency Generation Numerically Controlled Oscillator (NCO)
Program Memory Type Self-programmable Flash under software control
Power-On Reset Supported (POR)
Power-Up Timer Supported (PWRT)
Brown-Out Reset Programmable low-power BOR (LPBOR)
Watchdog Timer Programmable extended WDT, 1 ms to 256 s
Programming Interface In-Circuit Serial Programming (ICSP) using two pins
Code Protection Programmable
Boîtier 14-pin DIP
Type de montage Through-hole

Configuration des broches de PIC16F1503-E/P

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Broche 1 VDD — Positive supply voltage
Broche 2 RA5/VCAP — RA5 digital input or capacitor connection
Broche 3 RA4/T1OSC/C1OUT — RA4 digital input, Timer1 oscillator input, or comparator output
Broche 4 RA3/MCLR/VPP — RA3 digital input, master clear input, or programming voltage
Broche 5 RC2/CCP1/INT/OSC1/OSC1E — RC2 digital input or output, capture/compare, interrupt, or oscillator function
Broche 6 RC1/CCP2/OSC2/OSC2E — RC1 digital input or output, capture/compare, or oscillator function
Broche 7 RC0/CLKO/RC5 — RC0 digital input or output, clock output, or remapped RC5 function
Broche 8 RC5/CCP4 — RC5 digital input or output or capture/compare function
Broche 9 RC4/CCP3 — RC4 digital input or output or capture/compare function
Broche 10 RC3/SCK/SCL — RC3 digital input or output, SPI clock, or I2C clock
Broche 11 RA2/AN2/C2IN-/INT — RA2 digital input or output, analog input, comparator input, or interrupt
Broche 12 RA1/AN1/C1IN- — RA1 digital input or output, analog input, or comparator input
Broche 13 RA0/AN0/C1IN+ — RA0 digital input or output, analog input, or comparator input
Broche 14 VSS — Ground reference

Applications typiques

PIC16F1503-E/P convient pour 6 applications: USB Port-Power Controller, Industrial Sensor Node, LED Sequencing and Lighting Control, Appliance Control Panel, Compact Data Acquisition Controller, Programmable Power-Control Module.

⚡

USB Port-Power Controller

The PIC16F1503-E/P fits a compact USB charger controller because it combines a 20 MHz core with programmable timers, 128 bytes of RAM, and 3.5 KB of Flash for coordinating input detection, port control, and fault handling. The published UCS1002 and PIC16F1503 reference design demonstrates this role with the UCS1002 providing programmable port-power control. Its 10-bit ADC can also supervise a voltage or current signal when the analog divider is designed for the 2.3 V to 5.5 V operating range. The principal trade-off is the limited RAM, so firmware should reuse buffers and avoid unnecessary diagnostic copies.

🏭

Industrial Sensor Node

The PIC16F1503-E/P is appropriate for a compact industrial sensor node that measures an analog input and controls a small number of discrete outputs. Its 10-bit ADC handles common sensor signals, while 12 I/O pins leave interface capacity for switches, alarms, status indicators, or a communication link. The 3.5 KB Flash footprint is appropriate for compact control firmware, and the 128-byte RAM requires disciplined buffer management. For equipment exposed to temperature variation, the exact -E operating limits and industrial control requirements should be checked before the ordering code is approved.

💡

LED Sequencing and Lighting Control

The PIC16F1503-E/P can implement LED sequencing, status indication, and simple dimming logic without an external programmable logic device. The CWG peripheral provides hardware-assisted complementary waveform generation, and the 20 MHz core leaves instruction bandwidth for sequencing, fault detection, and user-interface updates. Twelve I/O pins provide enough parallel control for compact indicators or driver inputs, while the Flash memory stores patterns and configuration data. Designers should use timer-based timing and consider duty-cycle limits when driving high-current LEDs directly through MCU pins.

🔧

Appliance Control Panel

The PIC16F1503-E/P suits a compact appliance panel where a microcontroller must read buttons, evaluate analog levels, and operate relays or indicator lamps. Its 10-bit ADC supports input monitoring, the 12 available I/O pins support panel signals, and the 3.5 KB Flash can hold a complete control routine. The 2.3 V to 5.5 V operating range supports common low-voltage control architectures. A production design should reserve MCLR behavior for reliable startup, provide proper input conditioning, and account for relay-coil transients rather than routing them directly through controller pins.

📟

Compact Data Acquisition Controller

The PIC16F1503-E/P can act as a compact data-acquisition controller when the required sample rate is modest and the application prioritizes low component count. The 10-bit ADC supplies the measurement function, while the 20 MHz CPU performs scaling, filtering, threshold evaluation, and data preparation. Its 128 bytes of RAM limits simultaneous sample buffering, so streaming or averaging strategies are generally preferable to long raw-data capture. The controller remains suitable for supervisory measurements where an upstream system handles high-speed transfer or extensive storage.

🔋

Programmable Power-Control Module

The PIC16F1503-E/P is useful in programmable power-control modules because it can supervise analog conditions, coordinate sequencing through timers, and communicate status over discrete or serial interfaces. Its CLC peripheral can execute hardware-assisted threshold and signal decisions, reducing the polling burden on the CPU. The MCU is particularly appropriate for low-power auxiliary controllers rather than high-efficiency conversion stages. Firmware should include current-limit, timeout, and fault-latch behavior, and the PCB should preserve separation between sensitive measurement paths and switching-node energy.

Récapitulatif des produits recommandés

UCS1002 USB port-power controller used with PIC16F1503 in the manufacturer reference design Utilisé dans : USB Port-Power Controller, Industrial Sensor Node, Appliance Control Panel, Programmable Power-Control Module PIC16F1503 Base-family PIC16 controller used by the reference design Utilisé dans : USB Port-Power Controller, Industrial Sensor Node, LED Sequencing and Lighting Control, Appliance Control Panel, Compact Data Acquisition Controller, Programmable Power-Control Module PIC16F1503-I/P Industrial-temperature family option for a 14-pin DIP implementation Utilisé dans : USB Port-Power Controller, Industrial Sensor Node, LED Sequencing and Lighting Control, Appliance Control Panel, Compact Data Acquisition Controller, Programmable Power-Control Module
What are the key specifications of PIC16F1503-E/P that engineers should know?
The PIC16F1503-E/P combines a 20 MHz 8-bit RISC core, 3.5 KB of Flash memory, 128 bytes of RAM, 12 I/O pins, and a 10-bit ADC in a 14-pin DIP package. According to the Microchip PIC16F1503 datasheet, its operating voltage range is 2.3 V to 5.5 V. The device also includes CLC, CWG, NCO, self-programming, POR, PWRT, LPBOR, and an extended watchdog timer. These features make it suitable for compact mixed-signal control and sensing designs.
Where can I download the PIC16F1503-E/P datasheet PDF?
The PIC16F1503-E/P datasheet PDF can be downloaded from Microchip Technology's device-document link for the PIC16F1503 family. The manufacturer document identifies the device as a 14-pin Flash, 8-bit microcontroller and specifies a 2.3 V to 5.5 V operating range. The same document covers Flash memory, RAM, peripherals, electrical characteristics, and programming. Use the manufacturer PDF as the authoritative source when assigning pins or validating design limits.
Where can I find the PIC16F1503 pinout and pin diagram?
The PIC16F1503 pin assignments are shown in the pin-description and package drawings in the Microchip Technology PIC16F1503 datasheet. The PIC16F1503-E/P uses a 14-pin DIP arrangement, while the pin names can vary by multiplexed peripheral function. Consult the datasheet's 14-pin configuration drawing and pin-description table before laying out VDD, VSS, MCLR/VPP, analog inputs, oscillator connections, and ICSP programming pins.
What is the PIC16F1503-E/P equivalent for a 14-pin DIP design?
The closest same-package replacement identified for the PIC16F1503-E/P is the Microchip Technology PIC16F1503-I/P, which uses the same 14-pin DIP configuration and retains the family's core, memory, and peripheral resources. The primary selection difference is the temperature grade: the -I/P version is intended for the industrial grade, whereas the -E/P is the extended-temperature ordering option. Confirm operating-temperature requirements, pin functions, and qualification needs against the manufacturer datasheet before substitution.
PIC16F1503-I/P vs PIC16F1503-E/P — which is better for an industrial controller?
PIC16F1503-I/P is generally the more appropriate choice for an industrial controller whose specified temperature range corresponds to the industrial grade. Both devices use the same 14-pin DIP package and belong to the PIC16F1503 family, so their core, Flash memory, RAM, I/O, and peripheral architecture are closely aligned. The -I/P and -E/P suffix is the decisive item: verify the required ambient and junction-temperature limits in the manufacturer datasheet before approving either device.
What can replace PIC16F1503-E/P on the same PCB?
PIC16F1503-I/P is the supported same-package alternative identified for a PIC16F1503-E/P PCB because it retains the 14-pin DIP footprint and the same PIC16F1503 family architecture. It differs primarily in temperature-grade ordering, while maintaining the 20 MHz core, 3.5 KB Flash, 128-byte RAM, 12 I/O pins, and 10-bit ADC. Confirm the complete pin-description table, operating voltage, temperature limits, and programmed-device requirements before treating it as a drop-in replacement.
Is PIC16F1503-E/P suitable for battery-powered sensor nodes?
The PIC16F1503-E/P can suit battery-powered sensor nodes when the design stays within its 2.3 V to 5.5 V operating range and uses the device's sleep and peripheral features effectively. Its 3.5 KB Flash and 128-byte RAM are sufficient for compact sensing nodes, while the 10-bit ADC supports analog measurement. The exact low-power consumption figures are not stated here; consult the manufacturer electrical characteristics for operating, sleep, and conversion-current limits.
How is the PIC16F1503-E/P programmed?
The PIC16F1503-E/P is programmed through its In-Circuit Serial Programming interface using two dedicated programming connections. According to the Microchip PIC16F1503 datasheet, the controller also supports self-programming under software control. A practical design should expose the ICSP connector, maintain the required MCLR/VPP behavior, provide accessible programming power and ground, and follow the programming and electrical guidelines in the manufacturer documentation.
What is the PIC16F1503 circuit-diagram application for USB charging?
Microchip Technology publishes a UCS1002 and PIC16F1503 reference design for a universal serial bus charger. The design uses the PIC16F1503 as the system controller while the UCS1002 manages programmable port-power delivery and is described as supporting charging current up to 2.5 A. The reference-design PDF provides the most useful application circuit context, including the MCU, power-port controller, programming connections, and USB charging function.
Where can I buy PIC16F1503-E/P and check its availability?
The current availability, order quantity, and lead time for PIC16F1503-E/P can be requested through the Request a Quote form on this page. The exact MPN should be submitted as PIC16F1503-E/P so the inquiry remains tied to the 14-pin DIP ordering code rather than a different package or temperature suffix. The manufacturer lists the PIC16F1503 family as in production, but lot-specific availability should be confirmed when the order is placed.
What is the price of PIC16F1503-E/P?
The current unit price and quantity pricing for PIC16F1503-E/P are obtained through the Request a Quote form on this page. The quote should be requested using the complete suffix -E/P because the package and temperature grade distinguish it from other PIC16F1503 variants. This page intentionally does not reproduce a static price because stock, quantity, and supplier conditions can change independently of the device's technical specifications.
What is the lead time for PIC16F1503-E/P?
The lead time for PIC16F1503-E/P depends on current inventory, order quantity, and the requested delivery schedule. Submit the exact MPN and required quantity through the Request a Quote form on this page to obtain the current schedule. Microchip Technology identifies the PIC16F1503 family as in production, but family production status does not by itself guarantee immediate allocation for every package suffix or order size.
Is PIC16F1503-E/P in stock?
Inventory for PIC16F1503-E/P should be confirmed through the Request a Quote form on this page by providing the exact MPN and desired quantity. The 14-pin DIP and -E temperature suffix must be retained in the request because other PIC16F1503 versions use different packages. A family-level production indication does not establish the stock level of one exact ordering code, so current lot availability should be accepted only after written confirmation.
What is the best Microchip equivalent for PIC16F1503-E/P?
PIC16F1503-I/P is the closest Microchip Technology equivalent found for a same-footprint redesign because it uses the same 14-pin DIP package and shares the PIC16F1503 family's core and peripheral architecture. It is not a different-package substitute, so an existing DIP land pattern can be retained. Selection should focus on whether industrial versus extended-temperature grading matches the equipment environment, followed by verification of electrical limits, programming, and qualification requirements.
Does the PIC16F1503-E/P include RoHS and REACH compliance?
The RoHS and REACH status for the exact PIC16F1503-E/P ordering code should be confirmed through Microchip Technology's current material-compliance declarations before release to production. The PIC16F1503 family datasheet establishes electrical, environmental, and package information, but it should not be treated as the sole source for every jurisdictional declaration. Record the applicable manufacturer declaration, exemption basis, and revision with the production documentation.

Données de référence d'ingénierie pour PIC16F1503-E/P — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose PIC16F1503-E/P for a new 14-pin DIP design that needs the -E temperature-grade ordering, a 20 MHz 8-bit core, 3.5 KB Flash, 128-byte RAM, 12 I/O pins, and a 10-bit ADC. Select PIC16F1503-I/P when the equipment falls within the industrial-grade requirements and the same DIP footprint is desired; verify its temperature limits before substitution. The base PIC16F1503 ordering is useful when a project intentionally does not require the -E suffix, but its environmental grading must be confirmed. This MCU is best for compact control, sensing, lighting, appliance, and auxiliary USB power-control roles. It is not the best choice when the firmware exceeds 3.5 KB, RAM demand exceeds 128 bytes, high-speed data capture is required, or a smaller surface-mount package is mandatory.

Comparaison avec les alternatives

Paramètre Ce produit PIC16F1503-I/P PIC16F1503
Package 14-pin DIP 14-pin DIP 14-pin DIP
Brand Microchip Technology Microchip Technology Microchip Technology
CPU Architecture 8-bit PIC RISC 8-bit PIC RISC 8-bit PIC RISC
Maximum CPU Frequency 20 MHz 20 MHz 20 MHz
Flash Memory 3.5 KB (2K x 14 words) 3.5 KB (2K x 14 words) 3.5 KB (2K x 14 words)
RAM 128 bytes 128 bytes 128 bytes
I/O Pins 12 12 12
ADC 10-bit ADC 10-bit ADC 10-bit ADC
Operating Voltage 2.3 V to 5.5 V 2.3 V to 5.5 V 2.3 V to 5.5 V
Temperature Grade -E grade -I grade Unspecified base-family ordering

Principaux différenciateurs

  • Same-package alternative with industrial-grade ordering (vs PIC16F1503-I/P)
  • Complete mixed-signal control in one through-hole device (vs PIC16F1503)
  • Compact 128-byte RAM architecture suited to embedded firmware (vs PIC16F1503-I/P)

Notes de conception

Keep the PIC16F1503-E/P within its documented 2.3 V to 5.5 V operating range and follow the manufacturer decoupling recommendations for VDD and VSS. Place the primary bypass capacitor close to the supply pins to suppress switching-induced voltage excursions. For designs using the internal oscillator or any enabled digital peripheral, verify startup behavior and current demand across the complete supply range. Do not infer a battery life figure from the CPU frequency because peripheral activity, ADC use, and sleep-mode configuration materially change the result.

Preserve access to MCLR/VPP and the two ICSP programming pins when laying out the 14-pin DIP footprint. MCLR can be sensitive to noise and leakage, so route it away from switching nodes and use the connection method shown in the manufacturer circuit guidance. Keep analog inputs short, isolate them from high-current returns, and ground the analog reference according to the datasheet. A small test-point pattern makes programming and board-level troubleshooting possible without changing the component layout.

Do not treat every PIC16F1503 suffix as interchangeable. The -E/P ordering code combines the selected temperature-grade option with the 14-pin DIP package, while -I/P changes the grade and other suffixes change the package or transport format. Before replacing the device, verify the complete ordering code, pin names, programming method, operating-voltage limits, and required qualification. Also account for the device's 128-byte RAM by avoiding large local arrays and unnecessary interrupt-time copies.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The exact declaration status for PIC16F1503-E/P should be confirmed against Microchip Technology's current material-compliance and product-conformity records. AEC-Q100 is not applicable to this general-purpose microcontroller ordering code.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

pic16f1503 datasheet pic16f1503 pinout pic16f1503 price pic16f1503 datasheet pdf pic16f1503 equivalent pic16f1503 circuit diagram pic16f1503 programming pic16f1503 pinout diagram PIC16F1503-E/P datasheet PIC16F1503-E/P pinout PIC16F1503-E/P replacement PIC16F1503-E/P vs PIC16F1503-I/P

Composants & termes associés

Microchip Technology PIC16F1503-E/P PIC16F1503-I/P PIC16F1503 PIC16F1503 family 8-bit microcontroller Flash microcontroller embedded microcontroller PIC RISC architecture 10-bit ADC Configurable Logic Cell Complementary Waveform Generator Numerically Controlled Oscillator In-Circuit Serial Programming 3.5 KB Flash memory 128-byte SRAM 20 MHz CPU 2.3 V to 5.5 V operating voltage 14-pin DIP through-hole package UCS1002 USB charger reference design MCLR/VPP RoHS REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ