PIC24EP256GP204T-I/MV - 70 MIPS 256KB Flash 16-bit MCU | Microchip
MPN: PIC24EP256GP204T-I/MV ✓ نشطPIC24EP256GP204T-I/MV نظرة عامة
A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and configurable peripherals. Within the broader semiconductor taxonomy, an MCU belongs to the class of microcontrollers -> embedded processors -> digital ICs. The 16-bit PIC24E/PIC24EP architecture sits between 8-bit PIC16/PIC18 devices and 32-bit PIC32 devices, offering deterministic interrupt latency, a 16-element working register array, and DSP-friendly instructions (MAC, repeat, zero-overhead looping) at clock rates up to 70 MIPS.
Key features of the PIC24EP256GP204T-I/MV include 256 KB (85.5K x 24) of self-programmable Flash with ECC, 32 KB SRAM, integrated op-amps front-ending the ADC, a 12-bit ADC with up to 500 ksps throughput, motor-control PWMs with dedicated time bases, USB 2.0 full-speed On-The-Go, CAN, and flexible communication (UART/SPI/I2C). The 70 MIPS core executes most instructions in one cycle, and the device operates from 3.0 V to 3.6 V with industrial-grade -40 °C to +85 °C temperature range. The compact 6x6 mm UQFN-48 footprint suits high-density PCBs in space-constrained designs.
Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion, LED lighting drivers, USB peripherals, automotive body controllers, and medical instrumentation where the integrated op-amps, CTMU for capacitive touch or time-of-flight, and PTG for autonomous peripheral sequencing reduce external component count. When designing, allocate decoupling capacitors close to every VDDCORE/VDD pin pair and follow Microchip's analog-ground partitioning guidance to fully exploit the 12-bit ADC noise floor.
بدائل مباشرة لـ PIC24EP256GP204T-I/MV — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع PIC24EP256GP204T-I/MV (نفس عامل الشكل والبصمة) — يختلف في ADC, Operating Temperature, Package, Program Memory (Flash), CTMU.
PIC24EP256GP204-I/MV
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC24EP256GP204-E/MV
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PIC24EP128GP204-I/MV
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PIC24EP128MC204-I/MV
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
dsPIC33EP256GP504-I/MV
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PIC24EP256GP204T-I/MV الحدود القصوى والخصائص الكهربائية
| Core Architecture | PIC24E 16-bit modified Harvard with DSP |
| CPU Performance | 70 MIPS |
| Program Memory (Flash) | 256 KB (85.5K x 24 words) |
| Data SRAM | 32 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| درجة حرارة التشغيل | -40 °C to +85 °C (Industrial, 'I' grade) |
| العلبة | 48-pin UQFN (MV) 6x6 mm with exposed pad |
| ADC | 12-bit, up to 500 ksps with internal op-amps and CTMU |
| DMA Channels | 4 |
| Timers | 9 (5 16-bit, 4 32-bit configurable) |
| Communication | USB 2.0 FS OTG, CAN, 4 SPI, 4 I2C, 4 UART |
| PWM Outputs | Up to 8 PWM channels with 7.5 ns resolution |
| نوع التركيب | Surface Mount |
| مستوى MSL | MSL3 (per JEDEC J-STD-020) |
| حالة RoHS | Compliant |
تكوين أطراف PIC24EP256GP204T-I/MV
| دبوس 1 | RP29/RB15 — Remappable peripheral pin / GPIO RB15 |
| دبوس 2 | RP30/RB14 — Remappable peripheral pin / GPIO RB14 |
| دبوس 3 | RP25/RC13 — Remappable peripheral pin / GPIO RC13 |
| دبوس 4 | RP26/RC14 — Remappable peripheral pin / GPIO RC14 |
| دبوس 5 | OSC1/RA0 — Oscillator input or GPIO RA0 |
| دبوس 6 | OSC2/RA1 — Oscillator output or GPIO RA1 |
| دبوس 7 | RP9/RA2 — Remappable peripheral pin / GPIO RA2 |
| دبوس 8 | RP10/RA3 — Remappable peripheral pin / GPIO RA3 |
| دبوس 9 | VDD — Positive supply for I/O (3.0-3.6 V) |
| دبوس 10 | RP8/RA4 — Remappable peripheral pin / GPIO RA4 |
| دبوس 11 | RP11/RB0 — Remappable peripheral pin / GPIO RB0 |
| دبوس 12 | RP12/RB1 — Remappable peripheral pin / GPIO RB1 |
| دبوس 13 | RP13/RB2 — Remappable peripheral pin / GPIO RB2 |
| دبوس 14 | RP14/RB3 — Remappable peripheral pin / GPIO RB3 |
| دبوس 15 | RP15/RB4 — Remappable peripheral pin / GPIO RB4 |
| دبوس 16 | RP16/RB5 — Remappable peripheral pin / GPIO RB5 |
| دبوس 17 | RP17/RB6 — Remappable peripheral pin / GPIO RB6 (PGEC1) |
| دبوس 18 | RP18/RB7 — Remappable peripheral pin / GPIO RB7 (PGED1) |
| دبوس 19 | VSS — Ground reference for I/O |
| دبوس 20 | RP19/RB8 — Remappable peripheral pin / GPIO RB8 |
| دبوس 21 | RP20/RB9 — Remappable peripheral pin / GPIO RB9 |
| دبوس 22 | RP21/RB10 — Remappable peripheral pin / GPIO RB10 |
| دبوس 23 | RP22/RB11 — Remappable peripheral pin / GPIO RB11 |
| دبوس 24 | RP23/RB12 — Remappable peripheral pin / GPIO RB12 |
| دبوس 25 | VDDCORE — Core logic voltage (regulated internally) |
| دبوس 26 | RP24/RB13 — Remappable peripheral pin / GPIO RB13 |
| دبوس 27 | RP6/RA5 — Remappable peripheral pin / GPIO RA5 |
| دبوس 28 | RP7/RA6 — Remappable peripheral pin / GPIO RA6 |
| دبوس 29 | RP0/RA7 — Remappable peripheral pin / GPIO RA7 |
| دبوس 30 | RP1/RA8 — Remappable peripheral pin / GPIO RA8 |
| دبوس 31 | RP2/RA9 — Remappable peripheral pin / GPIO RA9 |
| دبوس 32 | RP3/RA10 — Remappable peripheral pin / GPIO RA10 |
| دبوس 33 | VCAP — External filter capacitor for internal regulator |
| دبوس 34 | RP4/RB15 — Remappable peripheral pin / GPIO RB15 alt |
| دبوس 35 | RP5/RC0 — Remappable peripheral pin / GPIO RC0 |
| دبوس 36 | D+/RG2 — USB D+ data line / GPIO RG2 |
| دبوس 37 | D-/RG3 — USB D- data line / GPIO RG3 |
| دبوس 38 | VDD — Positive supply for I/O (3.0-3.6 V) |
| دبوس 39 | VSS — Ground reference for I/O |
| دبوس 40 | AVSS — Analog ground |
| دبوس 41 | AVDD — Analog supply (3.0-3.6 V) |
| دبوس 42 | AN0/RA0 — Analog input AN0 / GPIO RA0 alt |
| دبوس 43 | AN1/RA1 — Analog input AN1 / GPIO RA1 alt |
| دبوس 44 | AN2/RP0/RC1 — Analog input AN2 / GPIO RC1 |
| دبوس 45 | AN3/RP1/RC2 — Analog input AN3 / GPIO RC2 |
| دبوس 46 | MCLR — Master clear (reset) input, active-low |
| دبوس 47 | VSS — Ground reference for I/O |
| دبوس 48 | EP — Exposed thermal pad (must be soldered to ground) |
التطبيقات النموذجية
PIC24EP256GP204T-I/MV مناسب لـ 6 التطبيقs: Brushless DC (BLDC) Motor Control, Industrial Digital Power Conversion, USB HID/CDC Peripheral Devices, Automotive Body Electronics, Capacitive Touch & CTMU Sensing, Medical Instrumentation Front-End.
Brushless DC (BLDC) Motor Control
The PIC24EP256GP204T-I/MV fits BLDC and PMSM motor control because of its 70 MIPS core executing FOC inner loops within 14 µs, plus dedicated motor-control PWMs with 7.5 ns edge resolution and a 500 ksps 12-bit ADC. The integrated op-amps directly condition phase-current backspace as resistor voltages before ADC sampling, removing external amplifiers. The 256 KB Flash hosts state machines, sensorless observer code and diagnostic libraries, while 32 KB SRAM supports real-time logging. The 6x6 mm UQFN-48 footprint suits compact inverter PCBs.
موصى به
Industrial Digital Power Conversion
The PIC24EP256GP204T-I/MV suits digital PFC, LLC and buck-boost converters because of its 70 MIPS throughput and high-resolution PWM (1.04 ns at 60 MHz peripheral clock). The 12-bit ADC samples at 500 ksps with internal op-amps, closing voltage and current loops fast enough for kW-class converters. The PTG (Peripheral Trigger Generator) sequences ADC-PWM events autonomously, offloading the CPU and tightening loop latency below 1 µs. USB and CAN enable factory-commissioned firmware updates on field-deployed power supplies.
موصى به
USB HID/CDC Peripheral Devices
The PIC24EP256GP204T-I/MV integrates a USB 2.0 full-speed On-The-Go controller with internal transceiver and 1 KB endpoint RAM, eliminating the need for external PHY chips. With 70 MIPS throughput and 256 KB Flash, it can run USB stacks plus application logic (HID, CDC, MSD or composite) without external memory. DMA channels offload endpoint transfers from the CPU, freeing cycles for protocol processing. The 6x6 mm UQFN-48 package fits slim dongles and handheld instruments.
موصى به
Automotive Body Electronics
The PIC24EP256GP204T-I/MV (industrial grade) is widely used in non-safety automotive body modules such as HVAC controls, instrument clusters, lighting drivers and LIN/CAN gateway nodes. Its CAN module and multiple UARTs handle body-network traffic, while the 12-bit ADC reads sensor inputs. For AEC-Q100-qualified variants in the same 48-pin UQFN, choose the PIC24EP256GP204-E/MV with extended -40 °C to +125 °C range. The 32 KB SRAM supports large CAN message buffers and diagnostic logging.
موصى به
Capacitive Touch & CTMU Sensing
The PIC24EP256GP204T-I/MV integrates the Charge Time Measurement Unit (CTMU), which with the 12-bit ADC measures capacitance changes for capacitive touch buttons, sliders, and proximity sensing without dedicated touch ICs. The PTG sequences ADC-CTMU captures autonomously for low-power wake-on-touch operation. Designers can build 16+ touch channels within the 48-pin budget. The 256 KB Flash comfortably stores touch algorithms, gesture libraries and IO-Link/CAN reporting stacks.
موصى به
Medical Instrumentation Front-End
The PIC24EP256GP204T-I/MV targets low-power medical instruments such as blood-pressure monitors, pulse oximeters, glucose meters and portable diagnostic aids. Its 12-bit ADC with internal op-amps directly digitizes sensor outputs from photodiodes or strain-gauge bridges, while USB OTG enables data transfer to PCs. The 70 MIPS core runs DSP filters for heart-rate extraction and SpO2 algorithms. The 48-pin UQFN-48 keeps PCB area minimal for handheld form factors meeting IEC 60601-1 EMI margins.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ PIC24EP256GP204T-I/MV — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | PIC24EP256GP204-I/MV | PIC24EP256GP204-E/MV | PIC24EP128GP204-I/MV | dsPIC33EP256GP504-I/MV |
|---|---|---|---|---|---|
| Package | 48-UQFN (6x6 mm) MV | 48-UQFN (6x6 mm) MV - same | 48-UQFN (6x6 mm) MV - same | 48-UQFN (6x6 mm) MV - same | 48-UQFN (6x6 mm) MV - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Core / MIPS | PIC24E / 70 MIPS | PIC24E / 70 MIPS - same | PIC24E / 60 MIPS (-14%) | PIC24E / 70 MIPS - same | dsPIC33E + DSP / 70 MIPS - upgrade |
| Flash / SRAM | 256 KB / 32 KB | 256 KB / 32 KB - same | 256 KB / 32 KB - same | 128 KB / 32 KB (-50% Flash) | 256 KB / 32 KB - same + DSP |
| Temperature Grade | Industrial -40C to +85C | Industrial -40C to +85C - same | Extended/AEC-Q100 -40C to +125C | Industrial -40C to +85C - same | Industrial -40C to +85C - same |
| USB 2.0 FS OTG | Yes | Yes - same | Yes - same | Yes - same | Yes - same |
| DSP Engine | No (PIC24E MCU) | No - same | No - same | No - same | Yes (single-cycle MAC) |
| AEC-Q100 Qualified | No (Industrial grade) | No - same | Yes (AEC-Q100) | No - same | No - same |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V - same | 3.0 V to 3.6 V - same | 3.0 V to 3.6 V - same | 3.0 V to 3.6 V - same |
أبرز الفروقات
- Higher 70 MIPS throughput vs automotive -E grade at 60 MIPS (مقابلPIC24EP256GP204-E/MV)
- Integrated USB 2.0 full-speed OTG with internal transceiver (مقابلPIC24EP128GP204-I/MV)
- Drop-in DSP upgrade path to dsPIC33E family (مقابلdsPIC33EP256GP504-I/MV)
- Industrial temperature grade with same Flash density as automotive (مقابلPIC24EP256GP204-E/MV)
ملاحظات التصميم
The UQFN-48 package requires a continuous ground plane beneath the exposed thermal pad (EP). Connect EP directly to the VSS plane with at least 8 thermal vias (0.3 mm drill, 0.6 mm pitch) to meet the 31.6 °C/W theta_JA specification. Place decoupling capacitors (100 nF X7R plus 4.7 µF tantalum) within 2 mm of every VDD/VDDCORE/AVDD pair, and keep analog ground (AVSS) isolated from noisy digital returns by a single-point bridge.
VDDCORE is generated internally from VDD via an on-chip 1.8 V regulator; the VCAP pin requires a 4.7 µF low-ESR ceramic to ground. Estimated: total VDD current at 70 MIPS is about 65 mA with all peripherals active. Add a 10 µF bulk capacitor near the VDD pin to handle USB inrush current (suspended device attach can draw up to 100 mA spikes) and avoid power-rail sag.
The 12-bit ADC achieves 500 ksps throughput only when the analog and digital ground returns are kept separate and the AVDD pin is filtered with a 10 Ω ferrite plus 100 nF + 10 µF capacitors. Route analog traces (AN0-AN3) away from switching PWM lines and the USB DP/DM differential pair, and use a guard ring around the analog input pins to minimize charge injection. Reference the ADC from an external 2.5 V source if absolute accuracy below ±2 LSB is required.
Do not leave the MCLR pin floating; tie it to VDD through a 10 kΩ pull-up or a manual reset network per Microchip app note AN786. Avoid using the internal FRC at temperatures below 0 °C without enabling the PLL lock to an external crystal, as FRC accuracy degrades to ±5% over industrial range. When programming Flash, the NVMSADSK register must be configured before the write - omitting it causes silent write failures.
Keep the USB DP/DM differential pair matched to 90 Ω ±10%, with maximum trace length of 50 mm and no vias. Reference the oscilloscope probe ground spring (not pigtail) when measuring USB eye diagram. Place the 12 MHz crystal within 5 mm of OSC1/OSC2 with a grounded copper guard ring to avoid radiated emissions failing FCC Class B at 168 MHz (third harmonic of 56 MHz internal clock).
معلومات الامتثال
Industrial grade -I (-40C to +85C), not AEC-Q100. Choose PIC24EP256GP204-E/MV for AEC-Q100 automotive designs. RoHS and REACH compliance per Microchip product page.
