PIC24HJ16GP304-I/ML - 40 MIPS 16-bit MCU | Microchip
MPN: PIC24HJ16GP304-I/ML ✓ نشطPIC24HJ16GP304-I/ML نظرة عامة
A PIC24H microcontroller is a high-performance embedded controller built around a modified Harvard 16-bit architecture with a 24-bit instruction word and variable-length opcodes. This MCU family belongs to the broader embedded-controller hierarchy: microcontroller, embedded processor, and semiconductor. It is intended for applications requiring fast, repetitive control calculations and combines digital control capabilities with analog measurement, communications, timers, and programmable peripheral pin selection.
Key device features include 40 MIPS execution, a 12-bit ADC, Peripheral Pin Select remapping, and JTAG boundary-scan support. The 16 KB Flash capacity is suitable for compact embedded applications, while 2 KB of RAM supports working variables, status information, and communication buffers. The 44-QFN package offers a compact 8 x 8 mm land pattern for space-constrained industrial and control boards.
The PIC24HJ16GP304 uses the PIC24H family CPU and is pin compatible with devices in the dsPIC33F family, according to the Microchip product page. Its 16-bit data path and high instruction throughput are useful for motor-control loops, industrial signal acquisition, communications, and embedded control systems that must process multiple inputs within predictable time limits. Peripheral Pin Select allows alternate functions to be assigned to supported digital I/O pins, reducing the need for fixed-function routing.
Typical uses include compact industrial controllers, sensor-acquisition nodes, motor-control platforms, data-acquisition equipment, and communication gateways. The 12-bit ADC supports analog measurement, while the available I/O support serial interfaces, logic inputs, outputs, and timing functions. Designers should check the exact peripheral allocation, pin multiplexing, and electrical limits in the manufacturer datasheet before assigning PCB functions.
For a new design, verify oscillator, power-supply, decoupling, programming, and exposed-pad requirements in the 44-QFN layout. Keep high-current outputs and sensitive analog inputs away from noisy switching nodes, provide local supply bypassing, and follow the package land-pattern recommendations. The exposed pad also requires an appropriate thermal and copper strategy, especially in elevated-temperature equipment.
This product page combines the manufacturer specifications, package details, lifecycle-oriented sourcing guidance, practical layout considerations, and verified drop-in alternatives. It is intended to help engineers identify the correct MCU configuration, plan firmware support, and assess board-level integration before starting a new embedded-control design.
بدائل مباشرة لـ PIC24HJ16GP304-I/ML — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع PIC24HJ16GP304-I/ML (نفس عامل الشكل والبصمة) — يختلف في Package, Core, Program Memory, I/O Pins, Peripheral Pin Select.
PIC24HJ16GP304-E/ML
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC24HJ16GP304-H/ML
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC24HJ16GP304T-I/ML
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC24HJ16GP304-I/ML الحدود القصوى والخصائص الكهربائية
| Device Type | 16-bit PIC24H microcontroller |
| Maximum CPU Performance | 40 MIPS |
| CPU Architecture | 16-bit modified Harvard architecture |
| Program Memory | 16 KB Flash (5.5K x 24 bits) |
| Data Memory | 2 KB RAM |
| ADC Resolution | 12 bits |
| I/O Pin Count | 35 pins |
| العلبة | 44-pin QFN (8 x 8 mm) |
| نوع التركيب | Surface mount |
| Temperature Grade | Industrial grade |
| Peripheral Pin Select | Supported |
| JTAG Boundary Scan | Supported |
| dsPIC33F Pin Compatibility | Pin compatible |
| Ordering Code | -I/ML |
| Packaging Method | Tray |
دليل تكوين أطراف PIC24HJ16GP304-I/ML 44-pin qfn (8 x 8 mm)
تكوين الأطراف لـ PIC24HJ16GP304-I/ML (حزمة 44-pin qfn (8 x 8 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ PIC24HJ16GP304-I/ML.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
PIC24HJ16GP304-I/ML مناسب لـ 6 التطبيقs: Compact Industrial Motor Controller, Industrial Sensor Acquisition, Data Acquisition Gateway, Programmable Logic Controller, Battery-Powered Measurement Node, Educational Embedded Control Platform.
Compact Industrial Motor Controller
PIC24HJ16GP304-I/ML fits compact motor-control platforms that require a 16-bit CPU running at up to 40 MIPS without moving to a larger microcontroller package. Its 35 I/O pins can support digital control inputs, status outputs, communication signals, and timer-based functions, while Peripheral Pin Select provides routing flexibility among compatible pins. The 12-bit ADC can be used for current, position, or analog feedback measurement when the application’s sampling and acquisition requirements are met. Use the manufacturer’s timer, pin-selection, and electrical tables to allocate channels, and route switching nodes separately from sensitive ADC inputs to reduce coupling.
موصى به
Industrial Sensor Acquisition
The PIC24HJ16GP304-I/ML is appropriate for distributed sensor-acquisition equipment that must combine analog measurement with several digital interfaces in an 8 x 8 mm package. Its 12-bit ADC supports process and instrumentation signals, while the 16-bit architecture and 40 MIPS rating provide headroom for filtering, calibration, and control calculations. Thirty-five I/O pins offer connections for sensors, indicators, and communications. The analog pins should be grouped according to the datasheet recommendations, and input filtering, reference stability, grounding, and PCB leakage should be addressed when selecting the sensor excitation and measurement range.
موصى به
Data Acquisition Gateway
PIC24HJ16GP304-I/ML can serve as the embedded controller in a compact data-acquisition gateway that gathers analog or digital measurements and forwards them through a serial interface. Its 16 KB Flash stores application firmware and configuration, while 2 KB of RAM accommodates sampled data, protocol state, and stack variables. The 12-bit ADC handles suitable analog channels and 35 I/O pins leave room for status indicators and communication lines. Firmware planning should verify the RAM demand of the selected protocol and avoid placing timing-sensitive acquisition tasks behind interrupt-heavy communication routines.
موصى به
Programmable Logic Controller
The PIC24HJ16GP304-I/ML is well suited to compact programmable logic controller platforms because it combines fast 16-bit execution, 35 I/O pins, timers, ADC resources, and flexible peripheral pin remapping in a small QFN package. The 40 MIPS capability supports deterministic scanning, input processing, output updates, and communication service within a single embedded controller. Peripheral Pin Select can simplify board routing by assigning eligible peripheral functions to appropriate pins. Validate scan-time budgets, interrupt latency, and output-settling requirements in the final firmware and use JTAG boundary-scan support for board interconnect verification.
موصى به
Battery-Powered Measurement Node
PIC24HJ16GP304-I/ML can be used in a battery-powered measurement node when the system needs more processing capability and I/O capacity than a small 8-bit controller. The 16-bit arithmetic and 40 MIPS performance support active filtering, calibration, and control, while the 16 KB Flash and 2 KB RAM fit compact embedded software. Power efficiency remains a system-level consideration because higher clock rates and active peripherals can increase current demand. Use low-power modes where appropriate, disable unused peripherals, and follow the manufacturer’s clock, I/O, and analog-input guidance to avoid leakage-driven measurement errors.
موصى به
Educational Embedded Control Platform
PIC24HJ16GP304-I/ML provides a practical platform for embedded-control education because it combines a documented 16-bit architecture, 40 MIPS processing, 16 KB Flash, 2 KB RAM, a 12-bit ADC, and 35 I/O pins. Students can implement motor-control loops, signal processing, communication protocols, and interrupt-based acquisition while using Peripheral Pin Select to study configurable hardware routing. JTAG boundary-scan support also assists hardware debugging and interconnect checks. Because the device uses a 44-QFN footprint, the training board should expose the required programming signals and provide a manufacturer-compliant land pattern with accessible test points.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ PIC24HJ16GP304-I/ML — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | PIC24HJ16GP304-E/ML | PIC24HJ16GP304-H/ML | PIC24HJ16GP304T-I/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8 x 8 mm) | 44-QFN (8 x 8 mm) | 44-QFN (8 x 8 mm) | 44-QFN (8 x 8 mm) |
| CPU Architecture | 16-bit modified Harvard architecture | 16-bit modified Harvard architecture | 16-bit modified Harvard architecture | 16-bit modified Harvard architecture |
| Maximum Performance | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Flash Memory | 16 KB (5.5K x 24 bits) | 16 KB (5.5K x 24 bits) | 16 KB (5.5K x 24 bits) | 16 KB (5.5K x 24 bits) |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB |
| ADC Resolution | 12 bits | 12 bits | 12 bits | 12 bits |
| I/O Pin Count | 35 pins | 35 pins | 35 pins | 35 pins |
| Temperature Grade | Industrial grade | Extended-temperature grade | Different temperature-grade ordering code | Industrial grade |
| Packaging Method | Tray | Tray | Tray | Tape and reel |
أبرز الفروقات
- Combines 16-bit control performance with a compact 8 x 8 mm footprint (مقابلPIC24HJ16GP304-E/ML)
- Combines 16 KB Flash, 2 KB RAM, and a 12-bit ADC in one 44-QFN device (مقابلPIC24HJ16GP304-H/ML)
- Maintains the same electrical configuration as the identified tape-and-reel order code (مقابلPIC24HJ16GP304T-I/ML)
ملاحظات التصميم
Route the 44-QFN land pattern exactly as specified in the manufacturer package drawing, including the exposed-pad geometry, solder-mask definition, and paste apertures. Place input and output decoupling capacitors close to their corresponding supply pins and provide a short, low-impedance ground return. The exposed pad should use the recommended via arrangement and copper treatment to improve both electrical grounding and thermal performance.
Keep the 12-bit ADC inputs and their reference paths away from switching outputs, relay drivers, clock lines, and high-current return paths. Use a quiet ground reference for analog measurement and follow the datasheet’s analog-layout recommendations when separating analog and digital return currents. Because Peripheral Pin Select changes peripheral routing options, finalize the pin-assignment map before routing sensitive signals to prevent avoidable board revisions.
Do not treat the -I, -E, -H, or -T ordering codes as interchangeable without checking temperature range and packaging requirements. The -I/ML target uses tray packaging, while PIC24HJ16GP304T-I/ML uses tape-and-reel. Also verify that the final firmware fits within 16 KB of Flash and that its stack, communication buffers, and application variables remain within the 2 KB RAM budget.
Design the 3.3 V supply path for the required operating condition at 40 MIPS, including startup current, I/O loading, and peripheral activity. Follow the device’s recommended decoupling network and verify that the source has adequate transient response. Unused inputs should be configured appropriately in firmware, and unused power or peripheral resources should remain disabled to reduce current consumption and improve signal integrity.
معلومات الامتثال
The manufacturer product page and datasheet information available for this product do not state the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status against the current manufacturer product documentation before procurement.