PIC24HJ16GP304-I/ML - 40 MIPS 16-bit MCU | Microchip
MPN: PIC24HJ16GP304-I/ML ✓ Hoạt độngPIC24HJ16GP304-I/ML Tóm tắt
A PIC24H microcontroller is a high-performance embedded controller built around a modified Harvard 16-bit architecture with a 24-bit instruction word and variable-length opcodes. This MCU family belongs to the broader embedded-controller hierarchy: microcontroller, embedded processor, and semiconductor. It is intended for applications requiring fast, repetitive control calculations and combines digital control capabilities with analog measurement, communications, timers, and programmable peripheral pin selection.
Key device features include 40 MIPS execution, a 12-bit ADC, Peripheral Pin Select remapping, and JTAG boundary-scan support. The 16 KB Flash capacity is suitable for compact embedded applications, while 2 KB of RAM supports working variables, status information, and communication buffers. The 44-QFN package offers a compact 8 x 8 mm land pattern for space-constrained industrial and control boards.
The PIC24HJ16GP304 uses the PIC24H family CPU and is pin compatible with devices in the dsPIC33F family, according to the Microchip product page. Its 16-bit data path and high instruction throughput are useful for motor-control loops, industrial signal acquisition, communications, and embedded control systems that must process multiple inputs within predictable time limits. Peripheral Pin Select allows alternate functions to be assigned to supported digital I/O pins, reducing the need for fixed-function routing.
Typical uses include compact industrial controllers, sensor-acquisition nodes, motor-control platforms, data-acquisition equipment, and communication gateways. The 12-bit ADC supports analog measurement, while the available I/O support serial interfaces, logic inputs, outputs, and timing functions. Designers should check the exact peripheral allocation, pin multiplexing, and electrical limits in the manufacturer datasheet before assigning PCB functions.
For a new design, verify oscillator, power-supply, decoupling, programming, and exposed-pad requirements in the 44-QFN layout. Keep high-current outputs and sensitive analog inputs away from noisy switching nodes, provide local supply bypassing, and follow the package land-pattern recommendations. The exposed pad also requires an appropriate thermal and copper strategy, especially in elevated-temperature equipment.
This product page combines the manufacturer specifications, package details, lifecycle-oriented sourcing guidance, practical layout considerations, and verified drop-in alternatives. It is intended to help engineers identify the correct MCU configuration, plan firmware support, and assess board-level integration before starting a new embedded-control design.
Bộ thay thế dễ dàng lắp đặt cho PIC24HJ16GP304-I/ML — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24HJ16GP304-I/ML (cùng hình factor và footprint) — khác nhau ở Package, Core, Program Memory, I/O Pins, Peripheral Pin Select.
PIC24HJ16GP304-E/ML
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24HJ16GP304-H/ML
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24HJ16GP304T-I/ML
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24HJ16GP304-I/ML Tỷ lệ tối đa & tính chất điện
| Device Type | 16-bit PIC24H microcontroller |
| Maximum CPU Performance | 40 MIPS |
| CPU Architecture | 16-bit modified Harvard architecture |
| Program Memory | 16 KB Flash (5.5K x 24 bits) |
| Data Memory | 2 KB RAM |
| ADC Resolution | 12 bits |
| I/O Pin Count | 35 pins |
| Hộp | 44-pin QFN (8 x 8 mm) |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Industrial grade |
| Peripheral Pin Select | Supported |
| JTAG Boundary Scan | Supported |
| dsPIC33F Pin Compatibility | Pin compatible |
| Ordering Code | -I/ML |
| Packaging Method | Tray |
Hướng dẫn cấu hình chân PIC24HJ16GP304-I/ML 44-pin qfn (8 x 8 mm)
Cấu hình chân cho PIC24HJ16GP304-I/ML (44-pin qfn (8 x 8 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC24HJ16GP304-I/ML.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC24HJ16GP304-I/ML phù hợp cho 6 Áp dụngs: Compact Industrial Motor Controller, Industrial Sensor Acquisition, Data Acquisition Gateway, Programmable Logic Controller, Battery-Powered Measurement Node, Educational Embedded Control Platform.
Compact Industrial Motor Controller
PIC24HJ16GP304-I/ML fits compact motor-control platforms that require a 16-bit CPU running at up to 40 MIPS without moving to a larger microcontroller package. Its 35 I/O pins can support digital control inputs, status outputs, communication signals, and timer-based functions, while Peripheral Pin Select provides routing flexibility among compatible pins. The 12-bit ADC can be used for current, position, or analog feedback measurement when the application’s sampling and acquisition requirements are met. Use the manufacturer’s timer, pin-selection, and electrical tables to allocate channels, and route switching nodes separately from sensitive ADC inputs to reduce coupling.
Được đề xuất
Industrial Sensor Acquisition
The PIC24HJ16GP304-I/ML is appropriate for distributed sensor-acquisition equipment that must combine analog measurement with several digital interfaces in an 8 x 8 mm package. Its 12-bit ADC supports process and instrumentation signals, while the 16-bit architecture and 40 MIPS rating provide headroom for filtering, calibration, and control calculations. Thirty-five I/O pins offer connections for sensors, indicators, and communications. The analog pins should be grouped according to the datasheet recommendations, and input filtering, reference stability, grounding, and PCB leakage should be addressed when selecting the sensor excitation and measurement range.
Được đề xuất
Data Acquisition Gateway
PIC24HJ16GP304-I/ML can serve as the embedded controller in a compact data-acquisition gateway that gathers analog or digital measurements and forwards them through a serial interface. Its 16 KB Flash stores application firmware and configuration, while 2 KB of RAM accommodates sampled data, protocol state, and stack variables. The 12-bit ADC handles suitable analog channels and 35 I/O pins leave room for status indicators and communication lines. Firmware planning should verify the RAM demand of the selected protocol and avoid placing timing-sensitive acquisition tasks behind interrupt-heavy communication routines.
Được đề xuất
Programmable Logic Controller
The PIC24HJ16GP304-I/ML is well suited to compact programmable logic controller platforms because it combines fast 16-bit execution, 35 I/O pins, timers, ADC resources, and flexible peripheral pin remapping in a small QFN package. The 40 MIPS capability supports deterministic scanning, input processing, output updates, and communication service within a single embedded controller. Peripheral Pin Select can simplify board routing by assigning eligible peripheral functions to appropriate pins. Validate scan-time budgets, interrupt latency, and output-settling requirements in the final firmware and use JTAG boundary-scan support for board interconnect verification.
Được đề xuất
Battery-Powered Measurement Node
PIC24HJ16GP304-I/ML can be used in a battery-powered measurement node when the system needs more processing capability and I/O capacity than a small 8-bit controller. The 16-bit arithmetic and 40 MIPS performance support active filtering, calibration, and control, while the 16 KB Flash and 2 KB RAM fit compact embedded software. Power efficiency remains a system-level consideration because higher clock rates and active peripherals can increase current demand. Use low-power modes where appropriate, disable unused peripherals, and follow the manufacturer’s clock, I/O, and analog-input guidance to avoid leakage-driven measurement errors.
Được đề xuất
Educational Embedded Control Platform
PIC24HJ16GP304-I/ML provides a practical platform for embedded-control education because it combines a documented 16-bit architecture, 40 MIPS processing, 16 KB Flash, 2 KB RAM, a 12-bit ADC, and 35 I/O pins. Students can implement motor-control loops, signal processing, communication protocols, and interrupt-based acquisition while using Peripheral Pin Select to study configurable hardware routing. JTAG boundary-scan support also assists hardware debugging and interconnect checks. Because the device uses a 44-QFN footprint, the training board should expose the required programming signals and provide a manufacturer-compliant land pattern with accessible test points.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24HJ16GP304-I/ML — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24HJ16GP304-E/ML | PIC24HJ16GP304-H/ML | PIC24HJ16GP304T-I/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8 x 8 mm) | 44-QFN (8 x 8 mm) | 44-QFN (8 x 8 mm) | 44-QFN (8 x 8 mm) |
| CPU Architecture | 16-bit modified Harvard architecture | 16-bit modified Harvard architecture | 16-bit modified Harvard architecture | 16-bit modified Harvard architecture |
| Maximum Performance | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS |
| Flash Memory | 16 KB (5.5K x 24 bits) | 16 KB (5.5K x 24 bits) | 16 KB (5.5K x 24 bits) | 16 KB (5.5K x 24 bits) |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB |
| ADC Resolution | 12 bits | 12 bits | 12 bits | 12 bits |
| I/O Pin Count | 35 pins | 35 pins | 35 pins | 35 pins |
| Temperature Grade | Industrial grade | Extended-temperature grade | Different temperature-grade ordering code | Industrial grade |
| Packaging Method | Tray | Tray | Tray | Tape and reel |
Bảo phân biệt quan trọng
- Combines 16-bit control performance with a compact 8 x 8 mm footprint (vsPIC24HJ16GP304-E/ML)
- Combines 16 KB Flash, 2 KB RAM, and a 12-bit ADC in one 44-QFN device (vsPIC24HJ16GP304-H/ML)
- Maintains the same electrical configuration as the identified tape-and-reel order code (vsPIC24HJ16GP304T-I/ML)
Ghi chú thiết kế
Route the 44-QFN land pattern exactly as specified in the manufacturer package drawing, including the exposed-pad geometry, solder-mask definition, and paste apertures. Place input and output decoupling capacitors close to their corresponding supply pins and provide a short, low-impedance ground return. The exposed pad should use the recommended via arrangement and copper treatment to improve both electrical grounding and thermal performance.
Keep the 12-bit ADC inputs and their reference paths away from switching outputs, relay drivers, clock lines, and high-current return paths. Use a quiet ground reference for analog measurement and follow the datasheet’s analog-layout recommendations when separating analog and digital return currents. Because Peripheral Pin Select changes peripheral routing options, finalize the pin-assignment map before routing sensitive signals to prevent avoidable board revisions.
Do not treat the -I, -E, -H, or -T ordering codes as interchangeable without checking temperature range and packaging requirements. The -I/ML target uses tray packaging, while PIC24HJ16GP304T-I/ML uses tape-and-reel. Also verify that the final firmware fits within 16 KB of Flash and that its stack, communication buffers, and application variables remain within the 2 KB RAM budget.
Design the 3.3 V supply path for the required operating condition at 40 MIPS, including startup current, I/O loading, and peripheral activity. Follow the device’s recommended decoupling network and verify that the source has adequate transient response. Unused inputs should be configured appropriately in firmware, and unused power or peripheral resources should remain disabled to reduce current consumption and improve signal integrity.
Thông tin tuân thủ
The manufacturer product page and datasheet information available for this product do not state the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status against the current manufacturer product documentation before procurement.