PIC32MZ1064DAB169T-I/HF - 200MHz 32-bit MCU 1MB Flash | Microchip
MPN: PIC32MZ1064DAB169T-I/HF ✓ نشطPIC32MZ1064DAB169T-I/HF نظرة عامة
A PIC32 microcontroller is a 32-bit RISC MCU family from Microchip based on the MIPS architecture (in this case, the microAptiv core) and designed as an extension of the legacy 16-bit PIC24/dsPIC families. PIC32MZ devices sit in the hierarchy Microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ DA graphics MCU, providing deterministic real-time performance, large memory headroom, and rich connectivity peripherals (HS USB, Ethernet, CAN, SQI) for embedded graphical, industrial, and connectivity applications.
Key features include the 200 MHz core, 1 MB Flash, 640 KB SRAM, integrated DDR2 DRAM controller (32 MB or 128 MB externally addressable), Graphics Controller + Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog channels, High-Speed USB 2.0 OTG, two CAN modules, and up to 120 GPIO in the 169-ball LFBGA package. The 200 MHz MIPS core delivers 252 DMIPS / 3.28 CoreMarks/MHz-class throughput, and the on-chip graphics pipeline eliminates the need for an external GPU for typical HMI workloads.
Typical applications include industrial HMI panels, graphical touch-screen controllers, automotive dashboards, medical device interfaces, point-of-sale terminals, and building-automation control panels. Designers also use the PIC32MZ DA family for SCADA-style operator interfaces, smart energy displays, and any product that needs a TFT/LCD up to WXGA or higher with responsive multi-layer graphics.
When designing with this part, ensure the PCB layout supports matched-length impedance-controlled DDR2 signals for the external memory interface. Provide adequate bulk decoupling near the 1.8 V and 3.3 V rails, and respect the LFBGA escape routing rules (microvia or via-in-pad recommended) to maintain SI on parallel busses. The -I/HF temperature suffix indicates industrial -40 C to +85 C operation with lead-free (Pb-free) matte-tin finish.
بدائل مباشرة لـ PIC32MZ1064DAB169T-I/HF — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع PIC32MZ1064DAB169T-I/HF (نفس عامل الشكل والبصمة) — يختلف في Graphics Controller, Package, USB, CAN, Operating Temperature.
PIC32MZ1064DAB169-I/HF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC32MZ1064DAA169T-I/HF
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
PIC32MZ1064DAB169-I/HF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC32MZ1025DAB169T-I/HF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC32MZ1025DAB169-I/HF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC32MZ1025DAL169T-I/HF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←PIC32MZ1064DAB169T-I/HF الحدود القصوى والخصائص الكهربائية
| Core Architecture | MIPS32 microAptiv |
| Family | PIC32MZ DA (Graphics) |
| Core Frequency | 200 MHz |
| Flash Memory | 1 MB (1M x 8) |
| SRAM | 640 KB |
| External Memory | DDR2 DRAM up to 128 MB addressable |
| ADC | 12-bit, 18 MSPS, up to 45 analog inputs |
| Graphics Controller | Integrated |
| Graphics Processor | Integrated |
| USB | Hi-Speed USB 2.0 OTG |
| CAN | Yes |
| GPIO (max) | 120 |
| جهد التغذية | 1.7 V to 3.6 V |
| درجة حرارة التشغيل | -40 C to +85 C (Industrial) |
| العلبة | 169-LFBGA (11x11 mm) |
| نوع التركيب | Surface Mount (BGA) |
| Lead-Free / RoHS | Lead-Free matte-tin (HF suffix), RoHS compliant |
دليل تكوين أطراف PIC32MZ1064DAB169T-I/HF 169-lfbga (11x11 mm)
تكوين الأطراف لـ PIC32MZ1064DAB169T-I/HF (حزمة 169-lfbga (11x11 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ PIC32MZ1064DAB169T-I/HF.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
PIC32MZ1064DAB169T-I/HF مناسب لـ 6 التطبيقs: Industrial HMI Touch Panels, Automotive Dashboard Displays, Medical Device User Interfaces, Point-of-Sale (POS) Terminals, Building Automation Control Panels, Smart Energy and Utility Displays.
Industrial HMI Touch Panels
The PIC32MZ1064DAB169T-I/HF's 200 MHz MIPS32 microAptiv core plus integrated Graphics Controller and Graphics Processor make it a single-chip solution for color TFT HMI panels up to WXGA+. Designers use the on-chip DDR2 controller (32 MB or 128 MB addressable) to host frame buffers without an external graphics chip. The 12-bit 18 MSPS ADC samples up to 45 analog signals for backlight/temperature monitoring while HS USB enables firmware updates and touchscreen data pipes.
موصى به
Automotive Dashboard Displays
With its 200 MHz core and integrated graphics pipeline plus 1 MB Flash / 640 KB SRAM, the PIC32MZ1064DAB169T-I/HF drives segmented and full-color dashboard TFTs without an external GPU. The HS USB and dual CAN interfaces connect to body controllers, infotainment, and OBD-II networks. Automotive designers may pair this MCU with an external CAN transceiver for cluster applications; note that the -I/HF suffix is industrial-grade (-40C to +85C), not AEC-Q100 qualified, so for under-hood ECUs a different part number is required.
موصى به
Medical Device User Interfaces
The PIC32MZ1064DAB169T-I/HF delivers deterministic MIPS real-time performance with 1 MB Flash and 640 KB SRAM for therapy pumps, patient monitors, and diagnostic analyzers. Its 12-bit 18 MSPS ADC captures sensor signals at high sample rates, while the integrated graphics block drives LCD/TFT panels for medical device UIs. The Hi-Speed USB port supports medical-grade USB device classes, and the 169-LFBGA package allows small form-factor PCB designs for portable instruments.
موصى به
Point-of-Sale (POS) Terminals
POS terminals need fast MIPS performance for encryption, barcode handling, and graphical receipts. The PIC32MZ1064DAB169T-I/HF's 200 MHz core, HS USB for peripherals, and integrated graphics controller handle customer-facing displays and signature capture. The external DDR2 interface (up to 128 MB addressable) supports large UI assets and font caches, while the 12-bit ADC reads keypad matrices and analog sensors in the same chassis.
موصى به
Building Automation Control Panels
Building automation panels for HVAC, access control, and lighting dashboards benefit from the PIC32MZ1064DAB169T-I/HF's on-chip graphics controller and 169-LFBGA footprint for compact wall-mount designs. The dual CAN bus interfaces link to elevator controllers and BMS networks, while HS USB serves as service/maintenance port. The 12-bit 18 MSPS ADC with up to 45 channels monitors analog sensors for indoor air quality, occupancy, and temperature feedback.
موصى به
Smart Energy and Utility Displays
The PIC32MZ1064DAB169T-I/HF's 200 MHz MIPS core and integrated graphics pipeline drive color TFTs in smart meters, EV charger HMI, and solar inverter displays. The Hi-Speed USB port supports firmware upgrades, while the dual CAN ports connect to utility bus protocols. The 1 MB Flash and 640 KB SRAM store multilingual UI strings, while the external DDR2 up to 128 MB supports complex energy-flow visualizations and trend graphs.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ PIC32MZ1064DAB169T-I/HF — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | PIC32MZ1064DAB169-I/HF | PIC32MZ1064DAA169T-I/HF | PIC32MZ1025DAB169T-I/HF | PIC32MZ1025DAB169-I/HF | PIC32MZ1025DAL169T-I/HF |
|---|---|---|---|---|---|---|
| Package | 169-LFBGA (11x11) | 169-LFBGA (11x11) - same | 169-LFBGA (11x11) - same | 169-LFBGA (11x11) - same | 169-LFBGA (11x11) - same | 169-LFBGA (11x11) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Architecture | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv |
| Core Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB | 640 KB |
| Graphics Controller | Integrated (full DA-B features) | Integrated (full DA-B features) | Integrated (DA-A reduced graphics) | Integrated (DA-B features) | Integrated (DA-B features) | Integrated (DA-L lite features) |
| USB | Hi-Speed USB 2.0 OTG | Hi-Speed USB 2.0 OTG | Hi-Speed USB 2.0 OTG | Hi-Speed USB 2.0 OTG | Hi-Speed USB 2.0 OTG | Hi-Speed USB 2.0 OTG |
| CAN | Yes (2x CAN) | Yes (2x CAN) | Yes (2x CAN) | Yes (2x CAN) | Yes (2x CAN) | Yes (2x CAN) |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
أبرز الفروقات
- Higher feature tier within DA family (مقابلPIC32MZ1064DAA169T-I/HF)
- Same die, packaging variant for prototype vs production (مقابلPIC32MZ1064DAB169-I/HF)
- Identical 169-LFBGA footprint to PIC32MZ1025DAB169T-I/HF (مقابلPIC32MZ1025DAB169T-I/HF)
ملاحظات التصميم
Estimated: the 169-LFBGA 11x11 mm package has a ball pitch of approximately 0.8 mm. Use microvia or via-in-pad technology with 0.2 mm via diameter to fan out the inner balls. Maintain matched-length traces (within +/- 25 mil) for the external DDR2 data, address, and clock buses to preserve signal integrity at 200 MHz core frequency.
Provide two 100 nF decoupling capacitors as close as possible to every VDD pin, plus 4.7 uF bulk caps on each voltage rail (3.3 V core, 1.8 V DDR2, and any 2.5 V analog). Place a ferrite bead between the 3.3 V analog and digital domains to reduce ADC noise coupling. The integrated graphics pipeline and DDR2 controller can source 200-300 mA peak during heavy LCD refresh - size the LDO or DC-DC accordingly.
Do not route any high-speed signal (DDR2 clocks, HS USB DP/DN) over or under the LFBGA. The HS USB differential pair (DP/DN) requires 90 ohm differential impedance and should be length-matched to within 150 mil. For ICSP debugging, the device has multiple PGECx/PGEDx pin pairs - use one pair consistently (e.g., PGEC2/PGED2) to avoid debugger lockout, as documented in the Northern Software dev notes.
معلومات الامتثال
The -I/HF suffix indicates industrial temperature range (-40 C to +85 C) and lead-free (Pb-free) halogen-free finish per Microchip ordering code convention. Not AEC-Q100 qualified - automotive designs requiring AEC-Q100 must select a qualified part number from Microchip's automotive PIC32 portfolio.