R5F104LEGFB#30 - 32MHz 64KB RL78/G14 MCU | Renesas
MPN: R5F104LEGFB#30 ✓ نشطR5F104LEGFB#30 نظرة عامة
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces into one device. The RL78 architecture belongs to the broader embedded-controller hierarchy, combining efficient instruction execution and low-power operation in devices intended for battery-powered instruments, industrial equipment, motor-control systems, and compact control products. The RL78/G14 group extends this family with mixed-signal and general-purpose capabilities for embedded designs.
The R5F104LEGFB#30 provides 64 KB of flash program memory organized as 64K by 8 bits, a 32 MHz operating frequency, and a 16-bit CPU architecture. Its stated operating-temperature range is -40 °C to +105 °C, supporting industrial temperature conditions. The 64-LFQFP package provides 64 external pins and a 10 mm × 10 mm body for board-level integration. RoHS compliance is stated for this ordering code.
RL78 devices are designed around efficient embedded execution rather than high-performance computing. The 32 MHz operating rate supports responsive control loops, while the 64 KB flash capacity accommodates application firmware and configuration data. Detailed RAM capacity, peripheral configuration, analog converter characteristics, and supply-voltage limits must be confirmed against the manufacturer datasheet before a new design is released.
Typical uses include industrial motor controllers, utility and metering equipment, sensor-processing units, compact industrial controllers, and low-power embedded control boards. For these systems, the useful combination is 16-bit processing, 32 MHz clock operation, 64 KB flash, and an industrial temperature range. Designs requiring a different package, memory density, temperature grade, or peripheral set should not substitute this device without pin and function verification.
PCB planning should preserve the 10 mm × 10 mm LFQFP land pattern, pin-1 orientation, exposed pad requirements if applicable, and the manufacturer-specified decoupling arrangement. Firmware, clock configuration, peripheral initialization, and brownout behavior must be implemented according to the hardware manual. Review the pin-description table and electrical-characteristics tables before assigning sensitive analog signals or planning external power conversion.
This product page combines the exact ordering information for the R5F104LEGFB#30 with application guidance, engineering design notes, and clearly qualified drop-in alternatives. It is intended to help engineers identify whether the RL78/G14 device and its 64-LFQFP footprint fit a new embedded-control design before completing schematic, layout, and firmware validation.
بدائل مباشرة لـ R5F104LEGFB#30 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
R5F104LEGFB
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
R5F104LEAFB
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
R5F104LEGFB#30 الحدود القصوى والخصائص الكهربائية
| Manufacturer | Renesas Electronics |
| Product Type | 16-bit microcontroller |
| Product Family | RL78/G14 |
| CPU Architecture | 16-bit |
| Maximum Operating Frequency | 32 MHz |
| Flash Memory | 64 KB (64K × 8 bits) |
| العلبة | 64-LFQFP |
| Package Body Dimensions | 10 mm × 10 mm |
| عدد الأطراف | 64 pins |
| نوع التركيب | Surface mount |
| نطاق درجة حرارة التشغيل | -40 °C to +105 °C |
| Power Class | Low-power general-purpose microcontroller |
| Primary Application Areas | Motor control, industrial, and metering |
| RoHS Compliance | Compliant |
دليل تكوين أطراف R5F104LEGFB#30 10 mm × 10 mm
تكوين الأطراف لـ R5F104LEGFB#30 (حزمة 10 mm × 10 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ R5F104LEGFB#30.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
R5F104LEGFB#30 مناسب لـ 6 التطبيقs: Industrial Motor Control, Utility Metering, Industrial Sensor Processing, Compact Equipment Controller, Low-Power Data Logger, Programmable Control Platform.
Industrial Motor Control
The R5F104LEGFB#30 fits compact industrial motor-control controllers that require a 16-bit processor, 32 MHz operating frequency, and 64 KB of flash program memory. Its 64-LFQFP package exposes a substantial pin count for motor-control peripherals, while the -40 °C to +105 °C operating range supports equipment deployed beyond room-temperature conditions. In a controller, the device can execute state-machine logic, process position or current feedback, and coordinate protection sequencing. The design must verify timer channels, capture features, ADC performance, and external driver interfaces against the manufacturer datasheet before assigning each peripheral.
موصى به
Utility Metering
The R5F104LEGFB#30 is appropriate for utility and metering equipment where a 32 MHz 16-bit controller must combine application firmware with measurement and communication functions. Its 64 KB flash provides a defined code-storage capacity for measurement routines, calibration tables, event logging, and communications protocols, while the industrial temperature range supports metering equipment installed in uncontrolled enclosures. Engineers should use the manufacturer pin table and electrical characteristics to confirm the required ADC channels, timer accuracy, communication interfaces, supply voltage, and oscillator arrangement. Firmware should also include brownout handling and watchdog behavior appropriate to metering service requirements.
موصى به
Industrial Sensor Processing
The R5F104LEGFB#30 can serve as the central controller in an industrial sensor-processing module that needs deterministic embedded execution at 32 MHz. The 16-bit architecture and 64 KB flash are suitable for acquisition sequencing, filtering, threshold evaluation, diagnostics, and local data handling, while the 64-LFQFP footprint provides access to multiple I/O and peripheral signals. Use the datasheet to validate ADC resolution, sampling characteristics, timer resources, and communication requirements for the selected sensor network. Pay particular attention to analog input noise, grounding, reference voltage, and the separation of sensitive measurement paths from switching or motor-drive nodes on the PCB.
موصى به
Compact Equipment Controller
The R5F104LEGFB#30 suits compact equipment controllers that require more control capability than an 8-bit device without moving to a high-performance application processor. Its 32 MHz clock rate supports responsive control loops, and its 64 KB flash can hold application logic, configuration, and diagnostic routines. The 10 mm × 10 mm 64-LFQFP package is practical for densely populated industrial boards but still requires careful escape routing and thermal review. Engineers should confirm supply voltage, reset behavior, watchdog functions, communication peripherals, and start-up requirements in the manufacturer documentation. External interface protection and power sequencing should be designed around the electrical limits rather than assumed from other RL78 members.
موصى به
Low-Power Data Logger
The R5F104LEGFB#30 can form the processing core of a low-power industrial data logger because it combines 16-bit processing, a 32 MHz operating frequency, and 64 KB of flash in an industrial-temperature package. Firmware can manage periodic sensor sampling, store operating events, and prepare records for a communications link. The RL78 family is associated with low-power embedded control, although actual sleep currents and wake-up timing must be taken from the device datasheet and measured in the finished design. To minimize energy waste, use the device’s intended low-power modes, disable unused peripherals, and avoid keeping external circuitry active when the logger is asleep.
موصى به
Programmable Control Platform
The R5F104LEGFB#30 is useful for programmable control platforms intended for motor-control, industrial, and metering products where firmware flexibility and a defined peripheral set are important. Its 64 KB flash allows a controlled application baseline, while the 32 MHz core provides sufficient execution rate for coordinated control and communication tasks. A platform built around this device should include a reproducible programming and configuration process, bootloader strategy, firmware revision control, and hardware watchpoints for field diagnostics. Before reusing the design for a different product, verify package pin assignment, peripheral multiplexing, clock limits, and operating-mode transitions in the manufacturer datasheet.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ R5F104LEGFB#30 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | R5F104LEGFB | R5F104LEAFB |
|---|---|---|---|
| Package | 64-LFQFP, 10 mm × 10 mm | 64-LFQFP, 10 mm × 10 mm | 64-LFQFP, 10 mm × 10 mm |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Product Family | RL78/G14 | RL78/G14 | RL78/G14 |
| CPU Architecture | 16-bit | 16-bit | 16-bit |
| Maximum Operating Frequency | 32 MHz | 32 MHz | 32 MHz |
| Pin Count | 64 pins | 64 pins | 64 pins |
| Ordering Code | R5F104LEGFB#30 | R5F104LEGFB | R5F104LEAFB |
أبرز الفروقات
- Exact #30 ordering configuration (مقابلR5F104LEGFB)
- Industrial-temperature operation (مقابلR5F104LEAFB)
- Confirmed flash organization (مقابلR5F104LEAFB)
ملاحظات التصميم
Implement the 10 mm × 10 mm 64-LFQFP footprint directly from the manufacturer land-pattern data, including pin-1 orientation, pad length, solder-mask clearance, and paste-aperture dimensions. The 64-pin package has a relatively fine pitch, so route escape lines with a clear strategy and inspect the assembled board optically before population. Maintain the documented keepout around exposed thermal features, if the selected package variant includes one.
Decouple each supply group at the device pins using the capacitance and placement specified in the manufacturer hardware guidelines. Route power and ground through the shortest practical paths, preserve quiet return paths for analog measurements, and avoid sharing narrow copper necks between sensitive and switching loads. Confirm the exact supply limits, operating-mode transitions, and external power-sequencing requirements in the electrical-characteristics section before selecting regulators or bulk capacitance.
Do not substitute an RL78/G14 ordering code solely because the CPU speed, flash size, and package family appear similar. Compare every pin name, power pin, ground pin, programming signal, reset behavior, clock pin, peripheral multiplexing, and configuration identifier between the installed and candidate devices. Firmware may also need adaptation if peripheral availability or package bonding differs. A schematic review alone does not establish drop-in equivalence; validate the candidate on a prototype board.
Separate analog measurement routing from motor-drive, clock, and digital switching nodes. Use a continuous ground reference, keep ADC traces short, and place input filtering near the connector or sensor interface. For designs involving crystal or oscillator timing, follow the manufacturer’s layout pattern and keep switching regulators and high-current traces away from sensitive timing nodes. Signal-integrity checks should include return-path continuity and crosstalk from adjacent fast edges.
معلومات الامتثال
Newark Electronics identifies the R5F104LEGFB#30 as RoHS compliant. No definitive REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established.