Renesas Electronics

R5F104LEGFB#30 - 32MHz 64KB RL78/G14 MCU | Renesas

部品番号: R5F104LEGFB#30 ✓ 生産中
64-LFQFP Package 32 MHz Speed 64 KB (64K × 8 bits) Memory
MOQ: 1 |

R5F104LEGFB#30 概要

Renesas Electronics R5F104LEGFB#30 is a 16-bit RL78/G14 general-purpose microcontroller operating at 32 MHz, with 64 KB of flash memory in a 64-pin LFQFP package measuring 10 mm by 10 mm. The device is intended for industrial, motor-control, and metering applications that require low-power embedded control in a compact surface-mount package.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces into one device. The RL78 architecture belongs to the broader embedded-controller hierarchy, combining efficient instruction execution and low-power operation in devices intended for battery-powered instruments, industrial equipment, motor-control systems, and compact control products. The RL78/G14 group extends this family with mixed-signal and general-purpose capabilities for embedded designs.

The R5F104LEGFB#30 provides 64 KB of flash program memory organized as 64K by 8 bits, a 32 MHz operating frequency, and a 16-bit CPU architecture. Its stated operating-temperature range is -40 °C to +105 °C, supporting industrial temperature conditions. The 64-LFQFP package provides 64 external pins and a 10 mm × 10 mm body for board-level integration. RoHS compliance is stated for this ordering code.

RL78 devices are designed around efficient embedded execution rather than high-performance computing. The 32 MHz operating rate supports responsive control loops, while the 64 KB flash capacity accommodates application firmware and configuration data. Detailed RAM capacity, peripheral configuration, analog converter characteristics, and supply-voltage limits must be confirmed against the manufacturer datasheet before a new design is released.

Typical uses include industrial motor controllers, utility and metering equipment, sensor-processing units, compact industrial controllers, and low-power embedded control boards. For these systems, the useful combination is 16-bit processing, 32 MHz clock operation, 64 KB flash, and an industrial temperature range. Designs requiring a different package, memory density, temperature grade, or peripheral set should not substitute this device without pin and function verification.

PCB planning should preserve the 10 mm × 10 mm LFQFP land pattern, pin-1 orientation, exposed pad requirements if applicable, and the manufacturer-specified decoupling arrangement. Firmware, clock configuration, peripheral initialization, and brownout behavior must be implemented according to the hardware manual. Review the pin-description table and electrical-characteristics tables before assigning sensitive analog signals or planning external power conversion.

This product page combines the exact ordering information for the R5F104LEGFB#30 with application guidance, engineering design notes, and clearly qualified drop-in alternatives. It is intended to help engineers identify whether the RL78/G14 device and its 64-LFQFP footprint fit a new embedded-control design before completing schematic, layout, and firmware validation.

ドロップイン代替品: R5F104LEGFB#30 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

R5F104LEGFB

✅ ドロップイン
📦 64-LFQFP
Ordering suffix differs by 0 mm in package dimensions; the #30 ordering code is absent, so device identity and grade details require datasheet confirmation

📋 参考代替品(カタログ未掲載)

R5F104LEAFB

✅ ドロップイン
📦 64-LFQFP
Family ordering code changes from G to A while retaining the 10 mm × 10 mm class; 0 MHz frequency difference is documented, while peripheral differences require confirmation

📋 参考代替品(カタログ未掲載)

R5F104LEGFB#30 最大定格&電気的特性

Manufacturer Renesas Electronics
Product Type 16-bit microcontroller
Product Family RL78/G14
CPU Architecture 16-bit
Maximum Operating Frequency 32 MHz
Flash Memory 64 KB (64K × 8 bits)
パッケージ 64-LFQFP
Package Body Dimensions 10 mm × 10 mm
ピン数 64 pins
実装タイプ Surface mount
動作温度範囲 -40 °C to +105 °C
Power Class Low-power general-purpose microcontroller
Primary Application Areas Motor control, industrial, and metering
RoHS Compliance Compliant

R5F104LEGFB#30 10 mm × 10 mm ピン配置ガイド

R5F104LEGFB#30 (10 mm × 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

R5F104LEGFB#30 の 10 mm × 10 mm パッケージピン配置図

詳細なピン配置データはありません: R5F104LEGFB#30.

詳細は データシート をご参照ください。

主な用途

R5F104LEGFB#30 の用途: 6 件s: Industrial Motor Control, Utility Metering, Industrial Sensor Processing, Compact Equipment Controller, Low-Power Data Logger, Programmable Control Platform.

🏭

Industrial Motor Control

The R5F104LEGFB#30 fits compact industrial motor-control controllers that require a 16-bit processor, 32 MHz operating frequency, and 64 KB of flash program memory. Its 64-LFQFP package exposes a substantial pin count for motor-control peripherals, while the -40 °C to +105 °C operating range supports equipment deployed beyond room-temperature conditions. In a controller, the device can execute state-machine logic, process position or current feedback, and coordinate protection sequencing. The design must verify timer channels, capture features, ADC performance, and external driver interfaces against the manufacturer datasheet before assigning each peripheral.

📟

Utility Metering

The R5F104LEGFB#30 is appropriate for utility and metering equipment where a 32 MHz 16-bit controller must combine application firmware with measurement and communication functions. Its 64 KB flash provides a defined code-storage capacity for measurement routines, calibration tables, event logging, and communications protocols, while the industrial temperature range supports metering equipment installed in uncontrolled enclosures. Engineers should use the manufacturer pin table and electrical characteristics to confirm the required ADC channels, timer accuracy, communication interfaces, supply voltage, and oscillator arrangement. Firmware should also include brownout handling and watchdog behavior appropriate to metering service requirements.

🧩

Industrial Sensor Processing

The R5F104LEGFB#30 can serve as the central controller in an industrial sensor-processing module that needs deterministic embedded execution at 32 MHz. The 16-bit architecture and 64 KB flash are suitable for acquisition sequencing, filtering, threshold evaluation, diagnostics, and local data handling, while the 64-LFQFP footprint provides access to multiple I/O and peripheral signals. Use the datasheet to validate ADC resolution, sampling characteristics, timer resources, and communication requirements for the selected sensor network. Pay particular attention to analog input noise, grounding, reference voltage, and the separation of sensitive measurement paths from switching or motor-drive nodes on the PCB.

🔧

Compact Equipment Controller

The R5F104LEGFB#30 suits compact equipment controllers that require more control capability than an 8-bit device without moving to a high-performance application processor. Its 32 MHz clock rate supports responsive control loops, and its 64 KB flash can hold application logic, configuration, and diagnostic routines. The 10 mm × 10 mm 64-LFQFP package is practical for densely populated industrial boards but still requires careful escape routing and thermal review. Engineers should confirm supply voltage, reset behavior, watchdog functions, communication peripherals, and start-up requirements in the manufacturer documentation. External interface protection and power sequencing should be designed around the electrical limits rather than assumed from other RL78 members.

📱

Low-Power Data Logger

The R5F104LEGFB#30 can form the processing core of a low-power industrial data logger because it combines 16-bit processing, a 32 MHz operating frequency, and 64 KB of flash in an industrial-temperature package. Firmware can manage periodic sensor sampling, store operating events, and prepare records for a communications link. The RL78 family is associated with low-power embedded control, although actual sleep currents and wake-up timing must be taken from the device datasheet and measured in the finished design. To minimize energy waste, use the device’s intended low-power modes, disable unused peripherals, and avoid keeping external circuitry active when the logger is asleep.

⚡

Programmable Control Platform

The R5F104LEGFB#30 is useful for programmable control platforms intended for motor-control, industrial, and metering products where firmware flexibility and a defined peripheral set are important. Its 64 KB flash allows a controlled application baseline, while the 32 MHz core provides sufficient execution rate for coordinated control and communication tasks. A platform built around this device should include a reproducible programming and configuration process, bootloader strategy, firmware revision control, and hardware watchpoints for field diagnostics. Before reusing the design for a different product, verify package pin assignment, peripheral multiplexing, clock limits, and operating-mode transitions in the manufacturer datasheet.

What is the R5F104LEGFB#30?
The R5F104LEGFB#30 is a Renesas Electronics 16-bit RL78/G14 general-purpose microcontroller rated at 32 MHz, with 64 KB of flash memory and a 64-LFQFP package measuring 10 mm × 10 mm. According to the manufacturer product page, the device targets motor-control, industrial, and metering applications. Its -40 °C to +105 °C operating range also places it in the industrial temperature class.
What are the key specifications of R5F104LEGFB#30 that engineers should know?
The R5F104LEGFB#30 combines a 16-bit RL78/G14 architecture, a 32 MHz operating frequency, and 64 KB of flash memory in a 64-pin LFQFP package. According to the Renesas Electronics product listing, the package is 10 mm × 10 mm and the operating-temperature range is -40 °C to +105 °C. The device is also identified as a low-power, general-purpose microcontroller for motor-control, industrial, and metering equipment.
Where to download the R5F104LEGFB#30 datasheet PDF?
The official R5F104LEGFB#30 product page is the appropriate starting point for the manufacturer datasheet and supporting documentation. It identifies the device as an RL78/G14 general-purpose microcontroller and links to ordering information for motor-control, industrial, and metering designs. Use the pin-description, electrical-characteristics, and application-note sections there when defining the schematic and PCB layout.
Where can I find the R5F104LEGFB#30 pinout?
The R5F104LEGFB#30 pinout is defined in the manufacturer datasheet’s pin-description table for the 64-LFQFP package. The package is a 10 mm × 10 mm surface-mount LQFP with 64 pins. Use that table to assign every power, ground, reset, clock, programming, and peripheral signal, and preserve the manufacturer’s pin-1 orientation when laying out the PCB.
What is the operating temperature range of R5F104LEGFB#30?
The R5F104LEGFB#30 operates from -40 °C to +105 °C, according to Mouser and Newark Electronics product listings. This range supports industrial-temperature applications rather than being limited to room-temperature consumer conditions. Designers should still verify individual electrical limits, temperature-dependent characteristics, and power dissipation in the manufacturer datasheet for the final operating envelope.
Where can I buy R5F104LEGFB#30 online?
Use the Request a Quote form on this page to request current availability, lead time, minimum order quantity, and shipment options for the R5F104LEGFB#30. The exact ordering code includes the #30 suffix, so include the full MPN when requesting a quotation to avoid confusion with related RL78/G14 variants.
What is the price of R5F104LEGFB#30?
Request a current quotation for the R5F104LEGFB#30 through the Request a Quote form on this page. The form captures the exact MPN and quantity required for an accurate response, including any scheduled-volume pricing or packaging considerations. This avoids providing a stale figure that may not reflect current market conditions.
What is the lead time for R5F104LEGFB#30?
Request the current lead time for R5F104LEGFB#30 through the Request a Quote form on this page, including your required quantity and target delivery date. Lead time can vary with order quantity, production scheduling, and the specific ordering code. The manufacturer product page lists the device as orderable, but current scheduling should be confirmed with the quote.
Is R5F104LEGFB#30 in stock?
The R5F104LEGFB#30 can be requested through the Request a Quote form on this page to confirm current stock and scheduled delivery for the required quantity. Because inventory can change rapidly, use the full ordering code R5F104LEGFB#30 in the request. The manufacturer listing confirms the product is available for ordering but does not establish a guaranteed inventory quantity.
What is the difference between R5F104LEGFB#30 and R5F104LEAFB?
The R5F104LEGFB#30 is an RL78/G14 32 MHz microcontroller with 64 KB of flash in a 64-LFQFP package, while R5F104LEAFB is a related ordering variant. The available comparison records do not establish whether every peripheral and electrical limit is identical, so engineers should compare the two datasheets before substitution. Do not treat the related family designation as proof of pin-to-pin equivalence.
Can R5F104LEAFB replace R5F104LEGFB#30?
R5F104LEAFB is a related RL78/G14-family candidate for R5F104LEGFB#30, but a valid drop-in replacement requires confirmation of the package, pin assignment, flash configuration, peripheral mapping, electrical limits, and device identity settings. Use the Request a Quote form to discuss substitution with the exact MPN. Final PCB reuse should depend on a successful manufacturer-datasheet pin comparison and prototype validation.
What can replace R5F104LEGFB#30?
R5F104LEAFB and the ordering variant R5F104LEGFB are the closest documented candidates to R5F104LEGFB#30, but neither should be treated as an automatic replacement. A genuine drop-in choice must preserve the 64-LFQFP footprint, pin functions, 32 MHz operating class, 64 KB flash configuration, supply requirements, and programming behavior. Request substitution support through the Request a Quote form and verify the candidate datasheet before committing a PCB.
When should I choose R5F104LEGFB#30 over another RL78/G14 device?
Choose R5F104LEGFB#30 when the design specifically requires a 16-bit RL78/G14 device with 32 MHz operation, 64 KB of flash, a 64-LFQFP footprint, and a -40 °C to +105 °C operating range. If a related variant changes flash organization, peripheral functions, package construction, or temperature grade, it is better treated as an alternative design than an automatic replacement.
Is R5F104LEGFB#30 suitable for motor control and metering?
The R5F104LEGFB#30 is suitable for motor-control and metering concepts because Renesas identifies the RL78/G14 device for those application areas. Its 16-bit architecture, 32 MHz operating frequency, 64 KB flash, and industrial temperature range form a suitable baseline for compact controllers and meters. Confirm timer, ADC, communication, and motor-drive requirements in the manufacturer datasheet before final design selection.
Is there a Renesas equivalent for R5F104LEGFB#30?
The closest Renesas candidates identified for the R5F104LEGFB#30 are R5F104LEAFB and R5F104LEGFB, both from the RL78/G14 family. Their suitability depends on whether the package, pinout, memory organization, peripherals, and electrical limits exactly match the installed device. Request the official cross-reference assistance through the Request a Quote form and confirm the result against both datasheets before production use.

エンジニアリング参考データ: R5F104LEGFB#30 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose R5F104LEGFB#30 when the design requires the exact Renesas RL78/G14 ordering code, a 16-bit core operating at 32 MHz, 64 KB of flash, a 64-LFQFP package measuring 10 mm × 10 mm, and operation from -40 °C to +105 °C. It is a strong fit for industrial motor-control, metering, sensor-processing, and compact equipment-control designs. R5F104LEGFB is the closest ordering variant for evaluation because it retains the same principal package and speed characteristics, but its suffix and grade semantics must be checked. R5F104LEAFB may suit a related RL78/G14 design, yet its ordering code suggests a different device configuration and should be accepted only after a complete pin, peripheral, memory, and electrical comparison. For any alternative, verify programming compatibility, configuration identifiers, clock behavior, reset logic, and exposed-pad requirements before releasing a new PCB.

代替品との比較

パラメータ この製品 R5F104LEGFB R5F104LEAFB
Package 64-LFQFP, 10 mm × 10 mm 64-LFQFP, 10 mm × 10 mm 64-LFQFP, 10 mm × 10 mm
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Product Family RL78/G14 RL78/G14 RL78/G14
CPU Architecture 16-bit 16-bit 16-bit
Maximum Operating Frequency 32 MHz 32 MHz 32 MHz
Pin Count 64 pins 64 pins 64 pins
Ordering Code R5F104LEGFB#30 R5F104LEGFB R5F104LEAFB

主な差別化要因

  • Exact #30 ordering configuration (vs R5F104LEGFB)
  • Industrial-temperature operation (vs R5F104LEAFB)
  • Confirmed flash organization (vs R5F104LEAFB)

設計ノート

Implement the 10 mm × 10 mm 64-LFQFP footprint directly from the manufacturer land-pattern data, including pin-1 orientation, pad length, solder-mask clearance, and paste-aperture dimensions. The 64-pin package has a relatively fine pitch, so route escape lines with a clear strategy and inspect the assembled board optically before population. Maintain the documented keepout around exposed thermal features, if the selected package variant includes one.

Decouple each supply group at the device pins using the capacitance and placement specified in the manufacturer hardware guidelines. Route power and ground through the shortest practical paths, preserve quiet return paths for analog measurements, and avoid sharing narrow copper necks between sensitive and switching loads. Confirm the exact supply limits, operating-mode transitions, and external power-sequencing requirements in the electrical-characteristics section before selecting regulators or bulk capacitance.

Do not substitute an RL78/G14 ordering code solely because the CPU speed, flash size, and package family appear similar. Compare every pin name, power pin, ground pin, programming signal, reset behavior, clock pin, peripheral multiplexing, and configuration identifier between the installed and candidate devices. Firmware may also need adaptation if peripheral availability or package bonding differs. A schematic review alone does not establish drop-in equivalence; validate the candidate on a prototype board.

Separate analog measurement routing from motor-drive, clock, and digital switching nodes. Use a continuous ground reference, keep ADC traces short, and place input filtering near the connector or sensor interface. For designs involving crystal or oscillator timing, follow the manufacturer’s layout pattern and keep switching regulators and high-current traces away from sensitive timing nodes. Signal-integrity checks should include return-path continuity and crosstalk from adjacent fast edges.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Newark Electronics identifies the R5F104LEGFB#30 as RoHS compliant. No definitive REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

R5F104LEGFB#30 datasheet R5F104LEGFB#30 pinout R5F104LEGFB#30 specifications R5F104LEGFB#30 datasheet pdf R5F104LEGFB#30 equivalent R5F104LEGFB#30 replacement R5F104LEGFB#30 cross reference R5F104LEGFB#30 footprint R5F104LEGFB#30 application circuit Renesas R5F104LEGFB#30 R5F104LEGFB#30 32 MHz 64KB R5F104LEGFB#30 64-LFQFP R5F104LEGFB#30 motor control R5F104LEGFB#30 price R5F104LEGFB#30 stock

関連部品&用語

Renesas Electronics R5F104LEGFB#30 R5F104LEGFB R5F104LEAFB RL78/G14 RL78 16-bit microcontroller general-purpose microcontroller embedded microcontroller microcontroller IC semiconductor 32 MHz 64 KB flash 64K × 8-bit flash organization 64-LFQFP LQFP package family surface-mount package industrial temperature grade motor control industrial control utility metering sensor processing RoHS Renesas Electronics R5F104LEGFB#30
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示