SI2493-D-GT - 56 kbps V.92 ISOmodem | Skyworks
MPN: SI2493-D-GT ✓ نشطSI2493-D-GT نظرة عامة
An ISOmodem is a single-chip implementation of a modem and its associated interface functions. The system-side Si2493 combines data modulation and demodulation with the telephone-line interface required by a global DAA design. This makes it part of the broader modem controller and processor IC category, used to connect embedded equipment to legacy PSTN services without requiring a separate external data-access arrangement.
Revision D of the Si2493 supports conventional modem data formats with connection rates reaching 56,000 bps. Its listed protocol set includes V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92, together with Bell 103 and Bell 212A. Additional listed capabilities include automatic rate negotiation, V.44, V.42, V.42bis, MNP2-5, PCM upstream and V.92 Quick Connect. These functions allow the controller to negotiate compatible operating modes with the connected telephone network.
The device includes on-chip program ROM containing the firmware required for the documented features. It also includes on-chip program RAM for minor changes to ROM firmware. This combination provides a self-contained modem solution and offers a degree of field-update flexibility, while the exact RAM-based modification process remains subject to the manufacturer's programming and system-integration guidance.
Typical implementations use the Si2493 in telephone terminal equipment, data communication devices and embedded PSTN access products. The 24-pin TSSOP SI2493-D-GT is appropriate when a design specifically requires this package, while the Si2493 family also includes a 16-pin SOIC option. The 16-pin version is footprint-compatible with the Si2401 ISOmodem and is identified by the manufacturer as the recommended option for most applications.
Circuit design should follow the complete Si2493 datasheet for clocking, line-interface implementation, power sequencing and external component selection. Designers should also allow for the global DAA requirements of the target country, including the applicable line-interface and regulatory network requirements. The Si2493 handles the modem protocol layer, but line termination, protection, isolation and PSTN approval remain separate system-level design tasks.
This product page combines the manufacturer's protocol and package information with practical application guidance, lifecycle-oriented sourcing information and a strict review of drop-in alternatives. It is intended to help engineers distinguish the 24-pin system-side implementation from the 16-pin SOIC family member and plan a compliant, testable PSTN interface without assuming that a different package or electrically unrelated controller can serve as a direct replacement.
بدائل مباشرة لـ SI2493-D-GT — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع SI2493-D-GT (نفس عامل الشكل والبصمة) — يختلف في Maximum Data Rate, Package.
SI2493-E-GT
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
SI2493-C-GT
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←SI2493-B-GT
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
SI2493-D-GTR
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
SI2493-D-GTL
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
SI2493-D-GT المواصفات
| Device Type | V.92 ISOmodem system-side modem controller |
| Maximum Data Rate | 56,000 bps |
| Line Interface | Full-duplex over the Public Switched Telephone Network |
| ITU-T Modem Formats | V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92 |
| Bell Modem Formats | Bell 103 and Bell 212A |
| Error-Control Formats | V.42, V.42bis and V.44 |
| Rate Negotiation | Automatic rate negotiation |
| Message Passing | MNP2-5 |
| Upstream PCM Support | V.92 PCM upstream |
| Connection Establishment | V.92 Quick Connect |
| Program Memory | On-chip program ROM |
| Program RAM | On-chip program RAM for minor firmware changes |
| جهد التغذية | 3 V to 3.6 V |
| العلبة | 24-TSSOP (0.173 in, 4.40 mm width) |
| نوع التركيب | Surface mount |
| Silicon Revision | Revision D |
دليل تكوين أطراف SI2493-D-GT 24-tssop (0.173 in, 4.40 mm width)
تكوين الأطراف لـ SI2493-D-GT (حزمة 24-tssop (0.173 in, 4.40 mm width)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ SI2493-D-GT.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
SI2493-D-GT مناسب لـ 6 التطبيقs: 56 kbps PSTN Data Terminal, Global DAA Telephone Equipment, Remote Diagnostics and Management Terminal, Embedded Telephone Access Box, Point-to-Point Data Communication, Legacy Equipment Upgrade and Retrofit.
56 kbps PSTN Data Terminal
The SI2493-D-GT fits a legacy telephone-network data terminal requiring full-duplex operation at rates up to 56,000 bps. Its V.92 support, automatic rate negotiation and V.92 Quick Connect provide the modem functions required to establish a connection with compatible PSTN equipment. The 24-pin TSSOP also allows the modem controller to be placed on a conventional surface-mount PCB. The external line interface still requires appropriate termination, protection and isolation, so the Si2493 handles modem communication while the surrounding telephone-network design remains a separate engineering responsibility.
Global DAA Telephone Equipment
A global DAA implementation using the SI2493-D-GT can combine country-independent modem behavior with the line-network circuitry required in each target region. The device supports V.21 through V.92, Bell 103 and Bell 212A formats, enabling broad compatibility with analog PSTN services. Because DAA approval is regional, the controller should be paired with the exact external components, isolation method and interface topology identified by Skyworks for the intended country. This division of responsibility helps keep protocol handling inside the Si2493 while leaving regulatory line access in the certified analog interface.
Remote Diagnostics and Management Terminal
The SI2493-D-GT can support a remote diagnostics or management terminal that must connect through an analog telephone line rather than an Ethernet or wireless network. Its 56,000 bps maximum rate is suitable for command exchange, configuration transfer and compact firmware or log transfers. Automatic rate negotiation allows the modem session to select a compatible rate, while V.42, V.42bis and V.44 capabilities provide the listed error-control functions. Product developers should evaluate session timeout, error recovery and line-quality behavior in the target network rather than assuming 56 kbps is available on every connection.
Embedded Telephone Access Box
An embedded telephone access box can use the SI2493-D-GT as its system-side modem controller when the product must retain PSTN compatibility. The on-chip program ROM provides firmware for the documented modem features, and the on-chip program RAM allows minor firmware changes. That integration reduces the need for a separate host to perform low-level modulation tasks. A practical design still needs a suitable processor interface, clock arrangement and external global DAA network. The 3 V to 3.6 V supply range should be reconciled with the rest of the box power tree and sequencing requirements.
Point-to-Point Data Communication
The SI2493-D-GT is suitable for point-to-point communication between two installations connected through the PSTN. Its support for V.32, V.34, V.90 and V.92 provides multiple modem operating modes, while automatic rate negotiation helps establish a usable session over variable line conditions. For long-distance or industrial links, pair the modem with an error-control protocol such as the listed V.42bis or V.44 function and validate the complete path under worst-case line noise. The component supports the modem side of the connection; the selected PSTN carrier determines final throughput and availability.
Legacy Equipment Upgrade and Retrofit
The SI2493-D-GT can modernize a legacy device that previously depended on a discrete or older modem implementation while preserving a 24-pin TSSOP-based board architecture. Its modem engine supports legacy Bell and ITU formats as well as V.92, making it useful where compatibility spans older equipment generations. The on-chip ROM and RAM simplify the implementation of the documented modem firmware. Before retrofitting, compare signal names, voltage levels, clocking, interrupt behavior and line-interface connections against the previous controller, since protocol compatibility alone does not establish pin-compatible replacement.
بيانات مرجعية هندسية لـ SI2493-D-GT — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج |
|---|---|
| Brand | Skyworks Solutions Inc. |
| Package | 24-TSSOP (0.173 in, 4.40 mm width) |
| Device Type | V.92 ISOmodem system-side modem controller |
| Maximum Data Rate | 56,000 bps |
| Supply Voltage | 3 V to 3.6 V |
| PSTN Operation | Full-duplex over the Public Switched Telephone Network |
| ITU-T Formats | V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92 |
| Bell Formats | Bell 103 and Bell 212A |
| Program Memory | On-chip program ROM and on-chip program RAM |
أبرز الفروقات
- Provides a complete V.92 system-side modem function (مقابل16-pin SOIC Si2493)
- Supports broad legacy PSTN modem compatibility (مقابلGeneric single-protocol modem controller)
- Integrates modem firmware and RAM resources (مقابلController Requiring External ROM and RAM)
ملاحظات التصميم
Assign the PCB using the Revision D Si2493 datasheet pin table rather than inferring signals from the SOIC-family version. Keep the 24-pin TSSOP footprint intact for the SI2493-D-GT, verify the pin-one orientation against the package drawing, and provide short ground returns around the device. Because this modem connects to a telephone network, isolate sensitive line-interface routing from logic and clock circuitry to prevent coupled noise from affecting controller operation.
Design the 3 V to 3.6 V supply rail with low noise and adequate decoupling at the Si2493 supply pins. Place the required bulk and high-frequency bypass capacitors close to their associated pins, and route high-current return paths away from modem clock and data lines. Confirm capacitor voltage ratings, DC-bias characteristics and regulator stability using the values and conditions specified in the Skyworks Si2493D datasheet, since substitutions based only on nominal capacitance can alter behavior.
Do not treat the 16-pin SOIC Si2493 as a pin-compatible substitute for the 24-pin TSSOP SI2493-D-GT. The package pin count, footprint and assignments differ. Also do not assume that the global DAA feature eliminates country-specific telephone-network approval. Validate the complete line interface, isolation and protection design for each deployment region, and preserve the clock, firmware and external-component requirements described in the manufacturer documentation.
Route clocks and modem interfaces away from noisy line-driver and switching-regulator nodes. Use a continuous ground reference beneath and around the controller, minimize long high-speed traces and terminate interfaces according to the Si2493 application circuit. If the design combines the modem controller with a switching supply or processor, test conducted and radiated emissions early because PSTN equipment must balance functional margin, electromagnetic compatibility and regional line-access requirements.
معلومات الامتثال
The identified Si2493 documentation describes modem formats, firmware resources and package options but does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals status for this ordering code.